arXiv subjects

Jason Glenn

Publications and source records attributed to Jason Glenn.

At least 19 recordsLinked to original sources

arXiv2026

Radiation Total Dose for PRIMA: Cold Exposure with Alpha Particles

The Probe far-Infrared Mission for Astrophysics (PRIMA) is a far-infrared (24-261 micron wavelengths) probe-class space observatory currently under Phase A study, which promises orders-of-magnitude improvement in mapping speed over its predecessors. PRIMA will field exquisitely sensitive kilopixel arrays of kinetic inductance detectors (KIDs) for the Far-Infrared Enhanced Survey Spectrometer (FIRESS) instrument. PRIMA will orbit in space at the Sun-Earth L2 point, where Planck found the energetic particle flux to be about 300/min/cm2. Thus, the possible effect of a high fluence of energetic particles on the detector sensitivity must be characterized. Previous work has suggested that bombardment of KIDs by ions can reduce the quasiparticle lifetime (Barends et. al. 2009), but the conditions of the experiment were not representative of a detector which is continuously held at sub-Kelvin temperatures in the energetic particle environment of L2 orbit. To better replicate the damage which would be produced by energetic particles in this environment, we developed a fully cryogenic irradiation experiment in which a stepper motor controls a screen which can block or reveal an alpha particle emitter. This setup can be used to irradiate aluminum KID arrays fabricated for FIRESS to well-controlled dose levels. In this work, we calculate the damage dose expected for a 5-year mission in L2 orbit, and we irradiate an array to approximately 62 percent of this level. Before and after irradiation, we measure the quasiparticle lifetimes, resonant frequencies, and quality factors of the detectors.

astro-ph.IM↗

arXiv2025

Spaceflight KID Readout Electronics for PRIMA

We present the design and testing of a prototype multiplexing kinetic inductance detector (KID) readout electronics for the PRobe far-Infrared Mission for Astrophysics (PRIMA) space mission. PRIMA is a Probe-class astrophysics mission concept that will answer fundamental questions about the formation of planetary systems, the co-evolution of stars and supermassive black holes in galaxies, and the rise of heavy elements and dust over cosmic time. The readout electronics for PRIMA must be compatible with operation at Earth-Sun L2 and capable of multiplexing more than 1000 detectors over 2.5 GHz bandwidth while consuming around 30 W per readout chain. The electronics must also be capable of switching between the two instruments, which have different readout bands: the hyperspectral imager (PRIMAger, 2.6-4.9 GHz) and the spectrometer (FIRESS, 0.4-2.4 GHz). The PRIMA readout electronics use high-heritage SpaceCube digital electronics with a build-to-print SpaceCube Mini v3.0 board using a radiation-tolerant Kintex KU060 field programmable gate array (FPGA) and a custom high-speed digitizer board, along with RF electronics that provide filtering and power conditioning. We present the driving requirements for the system, as well as the hardware, firmware, software, and system-level design that meets those requirements.

astro-ph.IM↗

arXiv2025

Optimization of lenslet arrays for PRIMA Kinetic Inductance Detectors

The PRobe far-Infrared Mission for Astrophysics (PRIMA) is a cryogenically cooled 1.8-m space telescope designed to address fundamental questions about the evolution of galactic ecosystems, the origins of planetary atmospheres, and the buildup of dust and metals over cosmic time. PRIMA will achieve unprecedented sensitivity in the 24 - 261 $\mu$m wavelength range, enabled by background-limited kinetic inductance detectors (KIDs) cooled to 120 mK. For PRIMA's Far-InfraRed Enhanced Survey Spectrometer (FIRESS) instrument, we have developed monolithic kilopixel silicon lenslet arrays to efficiently couple incident radiation from the telescope's fore-optics onto the KID absorber elements. These three-dimensional lenslet arrays are fabricated using grayscale lithography, followed by deep reactive ion etching (DRIE), and are anti-reflection (AR) coated with a quarter-wavelength thick deposition of Parylene-C. The lenslet arrays are aligned and bonded to the KID arrays using a thin layer of epoxy through a flip-chip bonder. In this work, we report on the optimized fabrication, lens design, AR coating, and bonding processes developed for the FIRESS lenslet arrays. We characterize brassboard lenslet arrays fabricated to meet the specifications of the FIRESS low and high spectral bands, demonstrate stepped-thickness AR-coatings to achieve high efficiency across broad wavelength ranges, and present spectral transmission measurements of the AR coating and the epoxy bonding layers.

astro-ph.IM↗

arXiv2025

KID Detector Readout Electronics Development for Habitable Worlds Observatory

We present the status and goals of the readout electronics system we are developing to support the detector arrays in the coronagraph instrument on the NASA Habitable Worlds Observatory (HWO) mission currently in development. HWO aims to revolutionize exoplanet exploration by performing direct imaging and spectroscopy of 25 or more habitable exoplanets, and to resolve a broad range of astrophysics science questions as well. Since exoplanet yield depends critically on the detector dark count rate, as we show in this paper, the ambitious goals of HWO require arrays of single-photon energy-resolving detectors. We argue that Kinetic Inductance Detectors (KIDs) are best suited to meet these requirements. To support the detectors required for HWO and future far-IR missions, at the required power consumption and detector count, we are developing a radiation-tolerant reconfigurable readout system for both imaging and energy-resolving single photon KID detector arrays. We leverage an existing RFSoC-based system we built for NASA balloons that has a power consumption of 30 Watts and reads out 2000-4000 detectors (i.e. 7-15 mW/pixel), and move to a radiation tolerant Kintex Ultrascale FPGA chip to bring low-power wide bandwidth readout to a space-qualified platform for the first time. This improves significantly over previous spaceflight systems, and delivers what is required for NASA's future needs: ~100,000 pixels with less than 1 kW total power consumption. Overall, the system we are developing is a significant step forward in capability, and retires many key risks for the Habitable Worlds Observatory mission.

astro-ph.IM↗

arXiv2025

The Far-Infrared Enhanced Survey Spectrometer (FIRESS) for PRIMA: Approach and Estimated Performance

We present the architectural concept for the Far-Infrared Enhanced Survey Spectrometer (FIRESS) for the Probe Mission for far-IR Astrophysics (PRIMA). FIRESS spans the 24--235 micron range with four R ~ 100 slit-fed grating modules, each coupling to a 24 (spatial) by 84 (spectral) pixel array of kinetic inductance detectors (KIDs). All four arrays are read out simultaneously, and a point source of interest can be coupled to two of the four bands at a time. A Fourier transform module can be engaged over a portion of the FIRESS slits to create a high-resolution mode in which the light is intercepted, processed by the interferometer then reinserted into the path to the grating modules for detection. We provide a simulation and description of the technique that will be used to obtain high-resolution spectra. We identify the most important system requirements imposed by the detector system, finding that they are met with the existing design. Finally, we present our performance modeling, including both direct estimates given our current design status, as well as durable guidelines for developing general-observer programs.

astro-ph.IM↗

arXiv2025

The Far-Infrared Enhanced Survey Spectrometer (FIRESS) for PRIMA: Science Drivers

We present the science drivers for the Far-Infrared Enhanced Survey Spectrometer (FIRESS), one of two science instrument on the PRobe Infrared Mission for Astrophysics (PRIMA). FIRESS is designed to meet science objectives in the areas of the origins of planetary atmospheres, the co-evolution of galaxies and supermassive black holes, and the buildup of heavy elements in the Universe. In addition to these drivers, FIRESS is envisioned as a versatile far-infrared spectrometer, capable of addressing science questions in most areas of astrophysics and planetary astronomy as part of a dominant General Observer (GO) program with 2/3 of the current science cases using FIRESS. We summarize how the instrument design choices and parameters enable the main science drivers as well as a broad and vibrant GO program.

astro-ph.IM↗

arXiv2025

Synergy between Roman and PRIMA imaging capabilities for large extragalactic surveys

The Roman Space Telescope will be instrumental for characterizing the physical properties of galaxies and understanding their evolution across time. However, a complete view of galaxy star formation activity will only be possible with the addition of far-infrared observations that a telescope such as PRobe far-Infrared Mission for Astrophysics (PRIMA) will be able to provide. Indeed, PRIMA's far-infrared camera will be highly sensitive to dust emission, whereas Roman will probe the stellar emission in rest-frame optical and ultraviolet of distant galaxies. Our aim here is to evaluate the advantage of combining large PRIMA and Roman extragalactic surveys to retrieve the physical properties of galaxies and compare them with what we would obtain using either dataset separately. To do so, we use the Code Investigating Galaxy Emission photometric modeling code to generate a far-ultraviolet to a far-infrared synthetic set of dusty star-forming galaxies at redshifts from 1.5 to 2.5, simulating the observations from the main extragalactic surveys of PRIMA and Roman. We find that the PRIMA + Roman observations can reliably retrieve the star formation rate, stellar masses, and dust luminosity.

astro-ph.IM↗

arXiv2025

PRIMA: PRIMAger, a far-infrared hyperspectral and polarimetric instrument

The PRobe far-Infrared Mission for Astrophysics (PRIMA) is an infrared observatory for the next decade, currently in Phase A, with a 1.8m telescope actively cooled to 4.5K. On board, an infrared camera, PRIMAger, equipped with ultra-sensitive kinetic inductance detector (KID) arrays, will provide observers with coverage of mid-infrared to far-infrared wavelengths from 24 to 264 microns. PRIMAger will offer two imaging modes: the Hyperspectral mode will cover the 24-84 microns wavelength range with a spectral resolution R=8, while the Polarimetric mode will provide polarimetric imaging in 4 broad bands, from 80 to 264 microns. These observational capabilities have been tailored to answer fundamental astrophysical questions such as black hole and star-formation co-evolution in galaxies, the evolution of small dust grains over a wide range of redshifts, and the effects of interstellar magnetic fields in various environments, as well as to open a vast discovery space with versatile photometric and polarimetric capabilities. PRIMAger is being developed by an international collaboration bringing together French institutes (Laboratoire d'Astrophysique de Marseille and CEA) through the center National d'Etudes Spatiales (CNES, France), the Netherlands Institute for Space Research (SRON, Netherlands), and the Cardiff University (UK) in Europe, as well as the Jet Propulsion Laboratory (JPL) and Goddard Space Flight Center (GSFC) in the USA.

astro-ph.IM↗

arXiv2025

JWST NIRCam Imaging of NGC 4258: I. Observation Overview

We present James Webb Space Telescope (JWST) NIRCam imaging of the nearby Seyfert 1.9 galaxy NGC 4258, which hosts strong star formation regions as well as an anomalous jet-like radio structure that extends through a significant portion of its disk. This galaxy provides a unique environment to study Active Galactic Nucleus (AGN)-driven shocks and their impact on the interstellar medium (ISM) as its proximity allows for narrow-band observations of various near-infrared tracers sensitive to multiple levels of shock and radiative excitation: [Fe II] (1.64 $\mu$m), Pa$\alpha$ (1.87 $\mu$m), H$_2$ (2.21 $\mu$m), 3.3 $\mu$m polycyclic aromatic hydrocarbon (PAH) emission, Br$\alpha$ (4.05 $\mu$m), and Pf$\beta$ (4.66 $\mu$m), allowing us to trace shocks with parsec-scale resolution. Comparing these near-infrared observations with available ultraviolet, optical, radio, and X-ray imaging, we find that shocks present in the brightest regions of the anomalous radio structure are likely of low-velocity (50-100 km s$^{-1}$), suggesting that these features originate from AGN-driven winds that interact with the host medium and mechanically impart energy into the disk. Further, while co-spatial [Fe II] and H$_2$ emission indicate multi-phase shocks, PAH emission is relatively weaker or absent in the most shock-excited regions, consistent with the destruction of small dust grains. Finally, we propose that surveys identifying enhanced [Fe II] in AGN host galaxies may systematically reveal a key population where AGN feedback is significantly coupled with the surrounding ISM and actively shaping galaxy evolution.

astro-ph.GA↗

arXiv2024

Metal-Mesh Linear Variable Filter for Far-Infrared Wavelengths

Future far-infrared (IR) observatories require compact and cost efficient optical linear variable bandpass filters (LVBFs) to define their instrument spectral bands. We have designed novel far-IR LVBFs that consist of metal-mesh bandpass filters comprised of a gold film with cross-slots of varying sizes along a silicon (Si) substrate with anti-reflection (AR) coatings. We present our work on the simulated and measured transmission of non-AR coated and AR coated LVBFs for bandpass peaks from wavelengths of 24 to 36 $μ$m with a resolving power ($R=λ_0/Δλ$) of R$\approx$6 for non-AR coated LVBFs and R$\approx$4 for AR coated LVBFs. We also present a method to decrease the effects of out-of-band high frequency transmission exhibited by metal-mesh filters by depositing a thin layer of hydrogenated amorphous silicon (a-Si:H) on the metal-mesh of the LVBF. We have fabricated and measured the LVBFs at room temperature and cryogenic temperatures (5 K). We measure a high peak transmission of $\sim$80-90 \% for the AR coated LVBF at 5 K and demonstrate that the a-Si:H LVBF is a promising method to address out-of-band high frequency transmission.

astro-ph.IM↗

arXiv2024

Superfluid-tight cryogenic receiver with continuous sub-Kelvin cooling for EXCLAIM

The EXperiment for Cryogenic Large-Aperture Intensity Mapping (EXCLAIM) is a balloon-borne telescope designed to survey star formation over cosmological time scales using intensity mapping in the 420 - 540 GHz frequency range. EXCLAIM uses a fully cryogenic telescope coupled to six on-chip spectrometers featuring kinetic inductance detectors (KIDs) to achieve high sensitivity, allowing for fast integration in dark atmospheric windows. The telescope receiver is cooled to $\approx$ 1.7 K by immersion in a superfluid helium bath and enclosed in a superfluid-tight shell with a meta-material anti-reflection coated silicon window. In addition to the optics and the spectrometer package, the receiver contains the magnetic shielding, the cryogenic segment of the spectrometer readout, and the sub-Kelvin cooling system. A three-stage continuous adiabatic demagnetization refrigerator (CADR) keeps the detectors at 100 mK while a $^4$He sorption cooler provides a 900 mK thermal intercept for mechanical suspensions and coaxial cables. We present the design of the EXCLAIM receiver and report on the flight-like testing of major receiver components, including the superfluid-tight receiver window and the sub-Kelvin coolers.

astro-ph.IM↗

arXiv2024

Development of an ultra-sensitive 210-micron array of KIDs for far-IR astronomy

The Probe far-Infrared Mission for Astrophysics (PRIMA) is a proposed space observatory which will use arrays of thousands of kinetic inductance detectors (KIDs) to perform low- and moderate-resolution spectroscopy throughout the far-infrared. The detectors must have noise equivalent powers (NEPs) at or below 0.1 aW/sqrt(Hz) to be subdominant to noise from sky backgrounds and thermal noise from PRIMA's cryogenically cooled primary mirror. Using a Radio Frequency System on a Chip for multitone readout, we measure the NEPs of detectors on a flight-like array designed to observe at a wavelength of 210 microns. We find that 92% of the KIDs measured have an NEP below 0.1 aW/sqrt(Hz) at a noise frequency of 10 Hz.

astro-ph.IM↗

arXiv2024

Monolithic Kilopixel Silicon Microlens Arrays for Future Far-Infrared Observatories

Future far-infrared astrophysics observatories will require focal plane arrays containing thousands of ultra-sensitive, superconducting detectors, each of which needs to be optically coupled to the telescope. At longer wavelengths, many approaches have been developed including feedhorn arrays and macroscopic arrays of lenslets. However, with wavelengths as short as 25 microns, optical coupling in the far-infrared remains challenging. In this paper, we present a novel approach for fabricating far-infrared monolithic silicon microlens arrays using grayscale lithography and deep reactive ion etching. The design, fabrication, and characterization of the microlens arrays are discussed. We compare the designed and fabricated lens profile, and calculate that the fabricated lenses will achieve 84% encircled power for the designed detector, which is only 3% less than the designed performance. We also present methods developed for anti-reflection coating microlens arrays and for a silicon-to-silicon die bonding process to hybridize microlens arrays with detector arrays.

astro-ph.IM↗

arXiv2024

High-sensitivity Kinetic Inductance Detector Arrays for the Probe Far-Infrared Mission for Astrophysics

Far-infrared (far-IR) astrophysics missions featuring actively cooled telescopes will offer orders of magnitude observing speed improvement at wavelengths where galaxies and forming planetary systems emit most of their light. The PRobe far-Infrared Mission for Astrophysics (PRIMA), which is currently under study, emphasizes low and moderate resolution spectroscopy throughout the far-IR. Full utilization of PRIMA's cold telescope requires far-IR detector arrays with per-pixel noise equivalent powers (NEPs) at or below 1 x 10-19 W/rtHz. We are developing low-volume Aluminum kinetic inductance detector (KID) arrays to reach these sensitivities. We will present on the development of our long-wavelength (210 um) array approach, with a focus on multitone measurements of our 1,008-pixel arrays. We measure an NEP below 1 x 10-19 W/rtHz for 73 percent of our pixels.

astro-ph.IM↗

arXiv2024

A 25-micron single photon sensitive kinetic inductance detector

We report measurements characterizing the performance of a kinetic inductance detector array designed for a wavelength of 25 microns and very low optical background level suitable for applications such as a far-infrared instrument on a cryogenically cooled space telescope. In a pulse counting mode of operation at low optical flux, the detectors can resolve individual 25-micron photons. In an integrating mode, the detectors remain photon noise limited over more than six orders of magnitude in absorbed power from 70 zW to 200 fW, with a limiting NEP of 4.6 x 10^-20 W/rtHz at 1 Hz. In addition, the detectors are highly stable with flat power spectra under optical load down to 1 mHz. Operational parameters of the detector are determined including the efficiency of conversion of the incident optical power into quasiparticles in the aluminum absorbing element and the quasiparticle self-recombination constant.

astro-ph.IM↗

arXiv2024

Overcoming Confusion Noise with Hyperspectral Imaging from PRIMAger

The PRobe far-Infrared Mission for Astrophysics (PRIMA) concept aims to perform mapping with spectral coverage and sensitivities inaccessible to previous FIR space telescopes. PRIMA's imaging instrument, PRIMAger, provides unique hyperspectral imaging simultaneously covering 25-235 $\mu$m. We synthesise images representing a deep, 1500 hr deg$^{-2}$ PRIMAger survey, with realistic instrumental and confusion noise. We demonstrate that we can construct catalogues of galaxies with a high purity ($>95$ per cent) at a source density of 42k deg$^{-2}$ using PRIMAger data alone. Using the XID+ deblending tool we show that we measure fluxes with an accuracy better than 20 per cent to flux levels of 0.16, 0.80, 9.7 and 15 mJy at 47.4, 79.7, 172, 235 $\mu$m respectively. These are a factor of $\sim$2 and $\sim$3 fainter than the classical confusion limits for 72-96 $\mu$m and 126-235 $\mu$m, respectively. At $1.5 \leq z \leq 2$, we detect and accurately measure fluxes in 8-10 of the 10 channels covering 47-235 $\mu$m for sources with $2 \leq$ log(SFR) $\leq 2.5$, a 0.5 dex improvement on what might be expected from the classical confusion limit. Recognising that PRIMager will operate in a context where high quality data will be available at other wavelengths, we investigate the benefits of introducing additional prior information. We show that by introducing even weak prior flux information when employing a higher source density catalogue (more than one source per beam) we can obtain accurate fluxes an order of magnitude below the classical confusion limit for 96-235 $\mu$m.

astro-ph.IM↗

arXiv2024

Confusion of extragalactic sources in the far infrared: a baseline assessment of the performance of PRIMAger in intensity and polarization

Because of their limited angular resolution, far-infrared telescopes are usually affected by confusion phenomenon. Since several galaxies can be located in the same instrumental beam, only the brightest objects emerge from the fluctuations caused by fainter sources. The probe far-infrared mission for astrophysics imager (PRIMAger) will observe the mid- and far-infrared (25-235 $\mu$m) sky both in intensity and polarization. We aim to provide predictions of the confusion level and its consequences for future surveys. We produced simulated PRIMAger maps affected only by the confusion noise using the simulated infrared extragalactic sky (SIDES) semi-empirical simulation. We then estimated the confusion limit in these maps and extracted the sources using a basic blind extractor. By comparing the input galaxy catalog and the extracted source catalog, we derived various performance metrics as completeness, purity, and the accuracy of various measurements. In intensity, we predict that the confusion limit increases rapidly with increasing wavelength. The confusion limit in polarization is more than 100x lower. The measured flux density is dominated by the brightest galaxy in the beam, but other objects also contribute at longer wavelength (~30% at 235 $\mu$m). We also show that galaxy clustering has a mild impact on confusion in intensity (up to 25%), while it is negligible in polarization. In intensity, a basic blind extraction will be sufficient to detect galaxies at the knee of the luminosity function up to z~3 and 10$^{11}$ M$_\odot$ main-sequence galaxies up to z~5. In polarization for a conservative sensitivity, we expect ~8 000 detections up to z=2.5 opening a totally new window on the high-z dust polarization. Finally, we show that intensity surveys at short wavelength and polarization surveys at long wavelength tend to reach confusion at similar depth. There is thus a strong synergy.

astro-ph.GA↗

arXiv2023

Parallel-Plate Capacitor Titanium Nitride Kinetic Inductance Detectors for Infrared Astronomy

The Balloon Experiment for Galactic INfrared Science (BEGINS) is a concept for a sub-orbital observatory that will operate from $λ$ = 25-250 $μ$m to characterize dust in the vicinity of high-mass stars. The mission's sensitivity requirements will be met by utilizing arrays of 1,840 lens-coupled, lumped-element kinetic inductance detectors (KIDs) operating at 300 mK. Each KID will consist of a titanium nitride (TiN) parallel strip absorbing inductive section and parallel plate capacitor (PPC) deposited on a silicon (Si) substrate. The PPC geometry allows for reduction of the pixel spacing. At the BEGINS focal plane the detectors require optical NEPs from $2\times10^{-16}$ W/$\sqrt{\textrm{Hz}}$ to $6\times10^{-17}$ W/$\sqrt{\textrm{Hz}}$ from 25-250 $μ$m for optical loads ranging from 4 pW to 10 pW. We present the design, optical performance and quasiparticle lifetime measurements of a prototype BEGINS KID array at 25 $μ$m when coupled to Fresnel zone plate lenses. For our optical set up and the absorption efficiency of the KIDs, the electrical NEP requirement at 25 $μ$m is $7.6\times10^{-17}$ W/$\sqrt{\textrm{Hz}}$ for an absorbed optical power of 0.36 pW. We find that over an average of five resonators the the detectors are photon noise limited down to about 200 fW, with a limiting NEP of about $7.4\times10^{-17}$ W/$\sqrt{\textrm{Hz}}$.

astro-ph.IM↗