Searcharxiv⌕ Search

arXiv subjects

Jason Hattrick-Simpers

Publications and source records attributed to Jason Hattrick-Simpers.

At least 19 recordsLinked to original sources

SPARC: Evidence-guided adaptive model composition for materials discovery

Closed-loop experimentation requires more than selecting the next experiment. It must also determine which existing measurements and model-derived relationships are sufficiently supported to influence that decision. Here we introduce SPARC (Sparse Predictive Aggregation of Regression Components), a framework that continually revises this support as experimental evidence accumulates. Competing model families are evaluated through out-of-fold predictions, so that each model is tested on observations not used in its corresponding fit. Sparse posterior composition assigns model influence according to predictive contributions supported by the out-of-fold evidence, retaining complementary contributions from several model families. Candidate-dependent predictive dispersion and residual variability define trust, which modulates exploration alongside the predicted response. Independent diagnostics also prioritize existing measurements for prospective verification, with model-derived trust reported alongside them. Across eight published materials datasets, SPARC achieved higher $R^2$ than the corresponding literature-reported values in six, with relative gains of up to 77% without the density-functional-theory- or experiment-derived descriptors used by several published pipelines. In an automated alkaline oxygen-evolution-reaction campaign, 8 of 11 SPARC-selected experiments reached overpotentials below 300 mV, with a best value of 242 mV, compared with 18 of 125 initial experiments. Measurements prioritized for verification before repetition subsequently deviated by 76 mV on average, compared with 27 mV for matched controls. SPARC therefore turns experimental evidence into a basis for revising model influence, directing exploration and identifying measurements that warrant verification.

cond-mat.mtrl-sci↗

AutoREC: A reinforcement learning platform for equivalent circuit model generation

This paper introduces AutoREC, an open-source Python platform for developing, training and evaluating reinforcement learning (RL) agents that automatically generate equivalent circuit models (ECMs) from electrochemical impedance spectroscopy (EIS) data. Although ECMs are widely used to interpret EIS measurements, their identification typically relies on manual trial-and-error, requiring domain expertise and limiting scalability, particularly in autonomous experimental pipelines such as self-driving laboratories. In AutoREC, ECM generation is formulated as a Markov decision process in which an RL agent sequentially modifies a circuit topology based on the current state, available actions and feedback from the resulting model. The platform supports an end-to-end workflow encompassing EIS preprocessing with selectable impedance representations, agent setup and training, ECM generation for new measurements and visualization-based evaluation and analysis of agent decision-making. AutoREC implements a configurable Double Deep Q-Network agent with prioritized experience replay and a dedicated deadloop mitigation strategy for navigating the complex circuit-generation action space efficiently. To demonstrate the platform, we trained a representative agent on 1350 synthetic spectra from five reference circuit families, evaluated it on 150 held-out synthetic spectra and applied it to 32 previously unseen experimental spectra from battery, corrosion, oxygen evolution reaction and CO2 reduction systems. These case studies illustrate the end-to-end capabilities of AutoREC while revealing challenges associated with experimental complexity and limited training-data coverage. The demonstrated agent serves as a reference implementation; AutoREC provides an extensible foundation through which users can develop and evaluate agents tailored to their specific electrochemical systems and research objectives.

cs.LG↗

Diversity-Aware Active Learning Builds Materials Datasets for Current and Future Objectives

Materials science data collection can be expensive, making dataset reuse and long-term utility important for future discovery. In practice, data collection often prioritizes properties of current interest while other properties are excluded from the acquisition process. This can produce datasets that are well suited for current objectives but lose information needed for properties of future interest. Here, we present how to construct datasets that remain informative for both. We develop and evaluate acquisition frameworks that combine predictive disagreement with diversity in material features, predicted outcomes, or both. We test these approaches across four DFT datasets and an experimental thermoelectric dataset. Diversity inclusion in dataset construction can reduce present and future objectives trade-off by preserving a broader range of materials and property behavior during acquisition. Across all datasets, the Non-dominated Sorting Genetic Algorithm II with disagreements and feature diversity (NSGA-II Dis. + diversity) framework developed in this work provides the most robust balance between current and future objectives. It maintains prediction performance above random sampling for current objectives while mitigating bias on excluded properties and, in many cases, improving their performance beyond random sampling. This diversity-aware acquisition framework provides a practical route to building materials datasets with unbiased quality entries and mitigating cold-start limitations in subsequent modeling and discovery campaigns.

cond-mat.mtrl-sci↗

AutoRASOR: Autonomous Rapid Scanning Electron Microscope Operator

Scanning Electron Microscopy (SEM) is a foundational technique for characterizing material microstructure, which dictates many fundamental physical and chemical properties. With the rise of Self-Driving Labs (SDLs), samples are now synthesized in large batches, demanding equally high-throughput, autonomous characterization. Existing automated electron microscopy pipelines are task-specific: they detect pre-defined features, optimize known properties, or require prior knowledge of the sample, restricting each pipeline to the material system it was built for. We introduce AutoRASOR, a task-agnostic autonomous SEM pipeline that captures the multi-scale morphology of an unknown sample without domain-specific pre-training, fine-tuning, or human prompting. AutoRASOR embeds micrographs in real time with a vision foundation model (VFM), DINOv3, and selects regions of interest (ROIs) through two complementary policies: Latent Farthest Point Sampling (LFPS) and active learning on morphological ambiguity, which is the conditional variance of unresolved fine-scale features given lower magnification appearance. Active learning on ambiguity consistently captures more diverse and rare morphologies than random ROI selection, while LFPS reliably recovers the specimen's morphological distribution within a limited capture budget, tested both on real SEM micrographs and synthetic phase-field images. By shifting autonomous characterization from pre-defined, task-specific targeting of features to morphological survey, AutoRASOR generates information-rich multi-scale datasets for diverse downstream tasks. Without the need for domain-specific pre-training or prior material assumptions, this framework can be deployed out-of-the-box to characterize novel materials produced by SDLs.

eess.IV↗

Accelerating Electrochemical Impedance Spectroscopy Measurements by Reducing Reliance on Noisy Low-Frequency Data

Electrochemical impedance spectroscopy (EIS) is a powerful tool for probing kinetic and transport processes in electrochemical systems, but its practical use is often limited by the long acquisition time and noise sensitivity of low-frequency measurements. Here, we present a statistical inference-assisted framework that reduces the reliance on low-frequency sampling by increasing the sampling density in cleaner high-frequency regions. Using AutoEIS and Bayesian inference, the augmented high-frequency data are fitted to selected equivalent circuit models (ECMs) to reconstruct the full impedance spectrum and quantify parameter uncertainty. To evaluate reconstruction performance, we introduce the critical frequency (fc), defined as the highest cutoff frequency at which the full EIS response can still be reliably recovered. The results show that additional high-frequency sampling can not only shift fc to higher values but also reduce the total measurement time. The specific improvement depends on the noise level of the EIS data, the number of added data points, and the ECM structure. Overall, this work provides a practical framework for designing fast and efficient EIS data acquisition and offers guidance for applying partial-frequency EIS reconstruction in real electrochemical characterization.

physics.data-an↗

Physics-informed time-series forecasting of perovskite photoluminescence stability

Accelerated ageing using elevated temperatures and illumination is one of the most common methods to rapidly study the stability of novel semiconductor materials. However, as the pace of materials discovery continues to accelerate, even faster stability evaluations are needed. A physics-informed time-series forecasting algorithm designed to predict the long-term photoluminescence stability of metal halide perovskites is presented. A diverse experimental dataset of 167 metal halide perovskites is collected, including different crystallinities and compositions. These are stressed using heat and light, while the photoluminescence (PL) is monitored. The >86k collected PL spectra are featurized using a physics-informed model, and a hybrid CNN-LSTM model is trained to forecast the PL intensity during degradation of samples unseen during model training. Notably, the approach generalizes across the material groups and outperforms baseline benchmarks. Furthermore, the physics-based featurization ensures explainability, enabling analysis to identify critical stability descriptors for given predictions. It is expected that this approach will be adapted to other types of time-series data and enables a pathway to significantly reduce experimental testing times.

cond-mat.mtrl-sci↗

Materials Acceleration Platform for Electrochemistry: a Platform for Autonomous Electrochemistry

Corrosion testing is slow, labor-intensive, and sensitive to operator technique, limiting the generation of large, high-quality datasets for data-driven materials discovery. The Materials Acceleration Platform for Electrochemistry (MAP-E) is an autonomous, high-throughput system, capable of performing parallel electrochemical experiments. It integrates robotic liquid handling, sample transfer with a multi-channel potentiostatic control to extract corrosion metrics without human intervention. Validation against an ASTM G61-analog benchmark demonstrates good reproducibility, with a standard deviation of 75 mV in pitting potential across 32 automated measurements. The platform was then employed to autonomously construct pH-chloride stability diagrams for 304 stainless steel using an uncertainty-driven sampling strategy on a Gaussian process surrogate model. This approach reduces operator involvement and accelerates the exploration of environmental spaces. The MAP-E establishes a framework for autonomous electrochemical experimentation, enabling generation of corrosion datasets that inform materials discovery, alloy design, and durability assessment in service environments.

cond-mat.mtrl-sci↗

Building a physics-aware AI ecosystem for solid-state hydrogen storage materials

Hydrogen storage remains a central bottleneck for scalable hydrogen energy systems due to the multiscale and coupled nature of the thermodynamics, kinetics, and microstructural evolution of hydrogen storage materials (HSMs). Although artificial intelligence (AI) has accelerated materials discovery, current approaches remain constrained by fragmented data, limited physical consistency, and weak integration with experimental validation. Here, we propose a unified framework that integrates coherent data infrastructure, physics-grounded modeling, and AI-driven inverse design within a closed-loop discovery paradigm. By embedding physical constraints and experimental feedback, this approach enables adaptive, physically consistent optimization, thereby establishing a pathway toward autonomous, digital-twin-enabled discovery of HSMs.

cond-mat.mtrl-sci↗

Exploring the Limitations of kNN Noisy Feature Detection and Recovery for Self-Driving Labs

Self-driving laboratories (SDLs) have shown promise to accelerate materials discovery by integrating machine learning with automated experimental platforms. However, errors in the capture of input parameters may corrupt the features used to model system performance, compromising current and future campaigns. This study develops an automated workflow to systematically detect noisy features, determine sample-feature pairings that can be corrected, and finally recover the correct feature values. A systematic study is then performed to examine how dataset size, noise intensity, noise type, and feature value distribution affect both the detectability and recoverability of noisy features on both Density Functional Theory (DFT) and SDL datasets. In general, high-intensity noise and large training datasets are conducive to the detection and correction of noisy features. Low-intensity noise reduces detection and recovery but can be compensated for by larger clean training data sets. Detection and correction results vary between features, with continuous and dispersed feature distributions showing greater recoverability compared to features with discrete or narrow distributions. This systematic study not only demonstrates a model agnostic framework for rational data recovery in the presence of noise, limited data, and differing feature distributions but also provides a tangible benchmark of kNN imputation in materials datasets. Ultimately, it aims to enhance data quality and experimental precision in automated materials discovery.

cs.LG↗

Autonomous Sampling and SHAP Interpretation of Deposition-Rates in Bipolar HiPIMS

High-power impulse magnetron sputtering (HiPIMS) offers considerable control over ion energy and flux, making it invaluable for tailoring the microstructure and properties of advanced functional coatings. However, compared to conventional sputtering techniques, HiPIMS suffers from reduced deposition rates. Many groups have begun to evaluate complex pulsing schemes to improve upon this, leveraging multi-pulse schemes (e.g. pre-ionization or bipolar pulses). Unfortunately, the increased complexity of these pulsing schemes has led to high-dimensionality parameter spaces that are prohibitive to classic design of experi-ments. In this work we evaluate bipolar HiPIMS pulses for improving deposition rates of Al and Ti sputter tar-gets. Over 3000 process conditions were collected via autonomous Bayesian sampling over a 6-dimensional parameter space. These process conditions were then interpreted using Shapley Additive Explanations (SHAP), to deconvolute complex process influences on deposition rates. This allows us to link observed var-iations in deposition rate to physical mechanisms such as back-attraction and plasma ignition. Insights gained from this approach were then used to target specific processes where the positive pulse components were expected to have the highest impact on deposition rates. However, in practice, only minimal improve-ments in deposition rate were achieved. In most cases, the positive pulse appears to be detrimental when placed immediately after the neg. pulse which we hypothesize relates to quenching of the afterglow plasma. The proposed workflow combining autonomous experimentation and interpretable machine learning is broad-ly applicable to the discovery and optimization of complex plasma processes, paving the way for physics-informed, data-driven advancements in coating technologies.

physics.plasm-ph↗

Training-Free Active Learning Framework in Materials Science with Large Language Models

Active learning (AL) accelerates scientific discovery by prioritizing the most informative experiments, but traditional machine learning (ML) models used in AL suffer from cold-start limitations and domain-specific feature engineering, restricting their generalizability. Large language models (LLMs) offer a new paradigm by leveraging their pretrained knowledge and universal token-based representations to propose experiments directly from text-based descriptions. Here, we introduce an LLM-based active learning framework (LLM-AL) that operates in an iterative few-shot setting and benchmark it against conventional ML models across four diverse materials science datasets. We explored two prompting strategies: one using concise numerical inputs suited for datasets with more compositional and structured features, and another using expanded descriptive text suited for datasets with more experimental and procedural features to provide additional context. Across all datasets, LLM-AL could reduce the number of experiments needed to reach top-performing candidates by over 70% and consistently outperformed traditional ML models. We found that LLM-AL performs broader and more exploratory searches while still reaching the optima with fewer iterations. We further examined the stability boundaries of LLM-AL given the inherent non-determinism of LLMs and found its performance to be broadly consistent across runs, within the variability range typically observed for traditional ML approaches. These results demonstrate that LLM-AL can serve as a generalizable alternative to conventional AL pipelines for more efficient and interpretable experiment selection and potential LLM-driven autonomous discovery.

cs.LG↗

Building Trustworthy AI for Materials Discovery: From Autonomous Laboratories to Z-scores

Accelerated material discovery increasingly relies on artificial intelligence and machine learning, collectively termed "AI/ML". A key challenge in using AI is ensuring that human scientists trust the models are valid and reliable. Accordingly, we define a trustworthy AI framework GIFTERS for materials science and discovery to evaluate whether reported machine learning methods are generalizable, interpretable, fair, transparent, explainable, robust, and stable. Through a critical literature review, we highlight that these are the trustworthiness principles most valued by the materials discovery community. However, we also find that comprehensive approaches to trustworthiness are rarely reported; this is quantified by a median GIFTERS score of 5/7. We observe that Bayesian studies frequently omit fair data practices, while non-Bayesian studies most frequently omit interpretability. Finally, we identify approaches for improving trustworthiness methods in artificial intelligence and machine learning for materials science by considering work accomplished in other scientific disciplines such as healthcare, climate science, and natural language processing with an emphasis on methods that may transfer to materials discovery experiments. By combining these observations, we highlight the necessity of human-in-the-loop, and integrated approaches to bridge the gap between trustworthiness and uncertainty quantification for future directions of materials science research. This ensures that AI/ML methods not only accelerate discovery, but also meet ethical and scientific norms established by the materials discovery community. This work provides a road map for developing trustworthy artificial intelligence systems that will accurately and confidently enable material discovery.

cond-mat.mtrl-sci↗

High-throughput validation of phase formability and simulation accuracy of Cantor alloys

High-throughput methods enable accelerated discovery of novel materials in complex systems such as high-entropy alloys, which exhibit intricate phase stability across vast compositional spaces. Computational approaches, including Density Functional Theory (DFT) and calculation of phase diagrams (CALPHAD), facilitate screening of phase formability as a function of composition and temperature. However, the integration of computational predictions with experimental validation remains challenging in high-throughput studies. In this work, we introduce a quantitative confidence metric to assess the agreement between predictions and experimental observations, providing a quantitative measure of the confidence of machine learning models trained on either DFT or CALPHAD input in accounting for experimental evidence. The experimental dataset was generated via high-throughput in-situ synchrotron X-ray diffraction on compositionally varied FeNiMnCr alloy libraries, heated from room temperature to ~1000 °C. Agreement between the observed and predicted phases was evaluated using either temperature-independent phase classification or a model that incorporates a temperature-dependent probability of phase formation. This integrated approach demonstrates where strong overall agreement between computation and experiment exists, while also identifying key discrepancies, particularly in FCC/BCC predictions at Mn-rich regions to inform future model refinement.

cond-mat.mtrl-sci↗

When Active Learning Fails, Uncalibrated Out of Distribution Uncertainty Quantification Might Be the Problem

Efficiently and meaningfully estimating prediction uncertainty is important for exploration in active learning campaigns in materials discovery, where samples with high uncertainty are interpreted as containing information missing from the model. In this work, the effect of different uncertainty estimation and calibration methods are evaluated for active learning when using ensembles of ALIGNN, eXtreme Gradient Boost, Random Forest, and Neural Network model architectures. We compare uncertainty estimates from ALIGNN deep ensembles to loss landscape uncertainty estimates obtained for solubility, bandgap, and formation energy prediction tasks. We then evaluate how the quality of the uncertainty estimate impacts an active learning campaign that seeks model generalization to out-of-distribution data. Uncertainty calibration methods were found to variably generalize from in-domain data to out-of-domain data. Furthermore, calibrated uncertainties were generally unsuccessful in reducing the amount of data required by a model to improve during an active learning campaign on out-of-distribution data when compared to random sampling and uncalibrated uncertainties. The impact of poor-quality uncertainty persists for random forest and eXtreme Gradient Boosting models trained on the same data for the same tasks, indicating that this is at least partially intrinsic to the data and not due to model capacity alone. Analysis of the target, in-distribution uncertainty, out-of-distribution uncertainty, and training residual distributions suggest that future work focus on understanding empirical uncertainties in the feature input space for cases where ensemble prediction variances do not accurately capture the missing information required for the model to generalize.

cond-mat.mtrl-sci↗

Assessment of different loss functions for fitting equivalent circuit models to electrochemical impedance spectroscopy data

Electrochemical impedance spectroscopy (EIS) data is typically modeled using an equivalent circuit model (ECM), with parameters obtained by minimizing a loss function via nonlinear least squares fitting. This paper introduces two new loss functions, log-B and log-BW, derived from the Bode representation of EIS. Using a large dataset of generated EIS data, the performance of proposed loss functions was evaluated alongside existing ones in terms of R2 scores, chi-squared, computational efficiency, and the mean absolute percentage error (MAPE) between the predicted component values and the original values. Statistical comparisons revealed that the choice of loss function impacts convergence, computational efficiency, quality of fit, and MAPE. Our analysis showed that X2 loss function (squared sum of residuals with proportional weighting) achieved the highest performance across multiple quality of fit metrics, making it the preferred choice when the quality of fit is the primary goal. On the other hand, log-B offered a slightly lower quality of fit while being approximately 1.4 times faster and producing lower MAPE for most circuit components, making log-B as a strong alternative. This is a critical factor for large-scale least squares fitting in data-driven applications, such as training machine learning models on extensive datasets or iterations.

cs.LG↗

Developing and Validating a High-Throughput Robotic System for the Accelerated Development of Porous Membranes

The development of porous polymeric membranes remains a labor-intensive process, often requiring extensive trial and error to identify optimal fabrication parameters. In this study, we present a fully automated platform for membrane fabrication and characterization via nonsolvent-induced phase separation (NIPS). The system integrates automated solution preparation, blade casting, controlled immersion, and compression testing, allowing precise control over fabrication parameters such as polymer concentration and ambient humidity. The modular design allows parallel processing and reproducible handling of samples, reducing experimental time and increasing consistency. Compression testing is introduced as a sensitive mechanical characterization method for estimating membrane stiffness and as a proxy to infer porosity and intra-sample uniformity through automated analysis of stress-strain curves. As a proof of concept to demonstrate the effectiveness of the system, NIPS was carried out with polysulfone, the green solvent PolarClean, and water as the polymer, solvent, and nonsolvent, respectively. Experiments conducted with the automated system reproduced expected effects of polymer concentration and ambient humidity on membrane properties, namely increased stiffness and uniformity with increasing polymer concentration and humidity variations in pore morphology and mechanical response. The developed automated platform supports high-throughput experimentation and is well-suited for integration into self-driving laboratory workflows, offering a scalable and reproducible foundation for data-driven optimization of porous polymeric membranes through NIPS.

cs.RO↗

Human-AI Synergy in Adaptive Active Learning for Continuous Lithium Carbonate Crystallization Optimization

As demand for high-purity lithium surges with the growth of the electric vehicle (EV) industry, cost-effective extraction from lower-grade North American sources like the Smackover Formation is critical. These resources, unlike high-purity South American brines, require innovative purification techniques to be economically viable. Continuous crystallization is a promising method for producing battery-grade lithium carbonate, but its optimization is challenged by a complex parameter space and limited data. This study introduces a Human-in-the-Loop (HITL) assisted active learning framework to optimize the continuous crystallization of lithium carbonate. By integrating human expertise with data-driven insights, our approach accelerates the optimization of lithium extraction from challenging sources. Our results demonstrate the framework's ability to rapidly adapt to new data, significantly improving the process's tolerance to critical impurities like magnesium from the industry standard of a few hundred ppm to as high as 6000 ppm. This breakthrough makes the exploitation of low-grade, impurity-rich lithium resources feasible, potentially reducing the need for extensive pre-refinement processes. By leveraging artificial intelligence, we have refined operational parameters and demonstrated that lower-grade materials can be used without sacrificing product quality. This advancement is a significant step towards economically harnessing North America's vast lithium reserves, such as those in the Smackover Formation, and enhancing the sustainability of the global lithium supply chain.

cs.CE↗

Accurate and efficient predictions of keyhole dynamics in laser materials processing using machine learning-aided simulations

The keyhole phenomenon has been widely observed in laser materials processing, including laser welding, remelting, cladding, drilling, and additive manufacturing. Keyhole-induced defects, primarily pores, dramatically affect the performance of final products, impeding the broad use of these laser-based technologies. The formation of these pores is typically associated with the dynamic behavior of the keyhole. So far, the accurate characterization and prediction of keyhole features, particularly keyhole depth, as a function of time, has been a challenging task. In situ characterization of keyhole dynamic behavior using the synchrotron X-ray technique is informative but complicated and expensive. Current simulations are generally hindered by their poor accuracy and generalization abilities in predicting keyhole depths due to the lack of accurate laser absorptance data. In this study, we develop a machine learning-aided simulation method that accurately predicts keyhole dynamics, especially in keyhole depth fluctuations, over a wide range of processing parameters. In two case studies involving titanium and aluminum alloys, we achieve keyhole depth prediction with a mean absolute percentage error of 10%, surpassing those simulated using the ray-tracing method with an error margin of 30%, while also reducing computational time. This exceptional fidelity and efficiency empower our model to serve as a cost-effective alternative to synchrotron experiments. Our machine learning-aided simulation method is affordable and readily deployable for a large variety of materials, opening new doors to eliminate or reduce defects for a wide range of laser materials processing techniques.

cond-mat.mtrl-sci↗