arXiv subjects

Jason K. Kawasaki

Publications and source records attributed to Jason K. Kawasaki.

At least 19 recordsLinked to original sources

arXiv2026

Remote epitaxial frustration stabilizes a correlated interfacial state

Remote epitaxy exploits substrate interactions transmitted across atomically thin materials to replicate substrate crystal structure. Here we show that competition among graphene-, substrate-, and reconstruction-derived interactions can instead produce frustration. Using GdAuGe films on $N$-layer graphene/SiC(0001), we identify at intermediate $N$ a self-limited interfacial state with broken long-range translational order, accompanied by non-monotonic crystallographic orientation selection in the epitaxial film above. The frustrated interface is accompanied by strongly enhanced magnetic irreversibility above 300 K, with an interface-dominated rather than volume-scaled response, linking epitaxial frustration to an emergent collective property. Annealing drives an initially epitaxial crystal into the frustrated state, distinguishing it from kinetically trapped disorder. First-principles calculations reveal a multi-periodic interfacial potential that provides a microscopic basis for frustration. Together, these results establish epitaxial frustration as a materials-design principle for stabilizing correlated interfacial states and emergent collective properties.

cond-mat.mtrl-sci↗

arXiv2026

Epitaxial stabilization of magnetic GdAuSb/LaAuSb superlattices

We report the epitaxial stabilization of GdAuSb films and GdAuSb/LaAuSb superlattices via molecular beam epitaxy on (0001)-oriented Al$_{2}$O$_{3}$ substrates. GdAuSb crystallize in the Au-Au dimerized YPtAs structure type (space group $P6_{3}/mmc$), the same structure as the Dirac semimetal LaAuSb. Angle-resolved photoemission spectroscopy (ARPES) measurements show similar near $E_F$ bandstructures for GdAuSb and LaAuSb, plus a rigid band shift for GdAuSb towards more hole-like behavior and core-like Gd $4f$ states $\sim 9$~eV below the Fermi energy. LaAuSb/GdAuSb superlattices exhibit sharp superlattice fringes by X-ray diffraction and atomically-precise interfaces by scanning transmission electron microscopy. Superlattices display two transitions in temperature-dependent resistvity, compared to a single Néel temperature for thick GdAuSb films. Superlattices of $Ln$AuSb materials ($Ln=$ rare earth) with atomically abrupt interfaces offer a new epitaxial platform for control of magnetic and topological order via tunable intralayer exchange and reduced dimensionality.

cond-mat.mtrl-sci↗

arXiv2026

Strain patterning of flexomagnetism

Flexomagnetism, the coupling of magnetic ordering to strain gradients, provides access to novel symmetry-broken magnetic phases that cannot be accessed via uniform strain. However, flexomagnetism is hard to understand because it is extremely difficult to control a spatially varying strain. Here, we develop a top-down strategy to pattern transverse strain gradients using helium ion implantation through a lithographically defined mask. Using epitaxial films of the antiferromagnetic nodal line semimetal GdAuGe, we demonstrate that transverse strain gradients $\partial \varepsilon_{zz}/\partial x$ induce near-room-temperature ferromagnetic response, compared to the retained para or antiferromagnetism for homogeneously strained GdAuGe. We spatially correlate the magnetic response with the regions of largest strain gradient, via magnetic force microscopy and nanobeam x-ray diffraction, respectively, to confirm the flexomagnetic response. Our approach opens new avenues for the precise control of magnetic phases in thin films of quantum materials via a patterned strain gradient.

cond-mat.mtrl-sci↗

arXiv2024

Tunable polar distortions and magnetism in Gd$_x$La$_{1-x}$PtSb epitaxial films

Hexagonal $ABC$ intermetallics are predicted to have tunable ferroelectric, topological, and magnetic properties as a function of the polar buckling of $BC$ atomic planes. We report the impact of isovalent lanthanide substitution on the buckling, structural phase transitions, and electronic and magnetic properties of Gd$_x$La$_{1-x}$PtSb films grown by molecular beam epitaxy (MBE) on c-plane sapphire substrates. The Gd$_x$La$_{1-x}$PtSb films form a solid solution from x = 0 to 1 and retain the polar hexagonal structure ($P6_3 mc$) out to $x \leq 0.95$. With increasing $x$, the PtSb buckling increases and the out of plane lattice constant $c$ decreases due to the lanthanide contraction. While hexagonal LaPtSb is a highly conductive polar metal, the carrier density decreases with $x$ until an abrupt phase transition to a zero band overlap semimetal is found for cubic GdPtSb at $x=1$. The magnetic susceptibility peaks at small but finite $x$, which we attribute to Ruderman Kittel Kasuya Yosida (RKKY) coupling between localized $4f$ moments, whose concentration increases with $x$, and free carriers that decrease with $x$. Samples with $x\geq 0.3$ show antiferromagnetic Curie-Weiss behavior and a Neel temperature that increases with $x$. The Gd$_x$La$_{1-x}$PtSb system provides opportunities to dramatically alter the polar buckling and concentration of local $4f$ moments, for tuning chiral spin textures and topological phases.

cond-mat.mtrl-sci↗

arXiv2023

Control of ternary alloy composition during remote epitaxy on graphene

Understanding the sticking coefficient $σ$, i.e., the probability of an adatom sticking to a surface, is essential for controlling the stoichiometry during epitaxial film growth. However, $σ$ on monolayer graphene-covered surfaces and its impact on remote epitaxy are not understood. Here, using molecular-beam epitaxial (MBE) growth of the magnetic shape memory alloy Ni$_2$MnGa, we show that the sticking coefficients for metals on graphene-covered MgO (001) are less than one and are temperature and element dependent, as revealed by ion backscattering spectrometry (IBS) and energy dispersive x-ray spectroscopy (EDS). This lies in stark contrast with most transition metals sticking on semiconductor and oxide substrates, for which $σ$ is near unity at typical growth temperatures ($T<800\degree$C). By initiating growth below $400 \degree$ C, where the sticking coefficients are closer to unity and wetting on the graphene surface is improved, we demonstrate epitaxy of Ni$_2$MnGa films with controlled stoichiometry that can be exfoliated to produce freestanding membranes. Straining these membranes tunes the magnetic coercive field. Our results provide a route to synthesize membranes with complex stoichiometries whose properties can be manipulated via strain.

cond-mat.mtrl-sci↗

arXiv2023

Effect of Pt vacancies on magnetotransport of Weyl semimetal candidate GdPtSb epitaxial films

We examine the effects of Pt vacancies on the magnetotransport properties of Weyl semimetal candidate GdPtSb films, grown by molecular beam epitaxy on c-plane sapphire. Rutherford backscattering spectrometry (RBS) and x-ray diffraction measurements suggest that phase pure GdPt$_{x}$Sb films can accommodate up to $15\%$ Pt vacancies ($x=0.85$), which act as acceptors as measured by Hall effect. Two classes of electrical transport behavior are observed. Pt-deficient films display a metallic temperature dependent resistivity (d$ρ$/dT$>$0). The longitudinal magnetoresistance (LMR, magnetic field $\mathbf{B}$ parallel to electric field $\mathbf{E}$) is more negative than transverse magnetoresistance (TMR, $\mathbf{B} \perp \mathbf{E}$), consistent with the expected chiral anomaly for a Weyl semimetal. The combination of Pt-vacancy disorder and doping away from the expected Weyl nodes; however, suggests conductivity fluctuations may explain the negative LMR rather than chiral anomaly. Samples closer to stoichiometry display the opposite behavior: semiconductor-like resistivity (d$ρ$/dT$<$0) and more negative transverse magnetoresistance than longitudinal magnetoresistance. Hysteresis and other nonlinearities in the low field Hall effect and magnetoresistance suggest that spin disorder scattering, and possible topological Hall effect, may dominate the near stoichiometric samples. Our findings highlight the complications of transport-based identification of Weyl nodes, but point to possible topological spin textures in GdPtSb.

cond-mat.mtrl-sci↗

arXiv2022

Pinhole-seeded lateral epitaxy and exfoliation of GaSb films on graphene-terminated surfaces

Remote epitaxy is a promising approach for synthesizing exfoliatable crystalline membranes and enabling epitaxy of materials with large lattice mismatch. However, the atomic scale mechanisms for remote epitaxy remain unclear. Here we experimentally demonstrate that GaSb films grow on graphene-terminated GaSb (001) via a seeded lateral epitaxy mechanism, in which pinhole defects in the graphene serve as selective nucleation sites, followed by lateral epitaxy and coalescence into a continuous film. Remote interactions are not necessary in order to explain the growth. Importantly, the small size of the pinholes permits exfoliation of continuous, free-standing GaSb membranes. Due to the chemical similarity between GaSb and other III-V materials, we anticipate this mechanism to apply more generally to other materials. By combining molecular beam epitaxy with \textit{in-situ} electron diffraction and photoemission, plus \textit{ex-situ} atomic force microscopy and Raman spectroscopy, we track the graphene defect generation and GaSb growth evolution a few monolayers at a time. Our results show that the controlled introduction of nanoscale openings in graphene provides a powerful route towards tuning the growth and properties of epitaxial films and membranes on 2D materials.

cond-mat.mtrl-sci↗

arXiv2022

Controlling the balance between remote, pinhole, and van der Waals epitaxy of Heusler films on graphene/sapphire

Remote epitaxy on monolayer graphene is promising for synthesis of highly lattice mismatched materials, exfoliation of free-standing membranes, and re-use of expensive substrates. However, clear experimental evidence of a remote mechanism remains elusive. In many cases, due to contaminants at the transferred graphene/substrate interface, alternative mechanisms such as pinhole-seeded lateral epitaxy or van der Waals epitaxy can explain the resulting exfoliatable single-crystalline films. Here, we find that growth of the Heusler compound GdPtSb on clean graphene on sapphire substrates produces a 30 degree rotated epitaxial superstructure that cannot be explained by pinhole or van der Waals epitaxy. With decreasing growth temperature the volume fraction of this 30 degree domain increases compared to the direct epitaxial 0 degree domain, which we attribute to slower surface diffusion at low temperature that favors remote epitaxy, compared to faster surface diffusion at high temperature that favors pinhole epitaxy. We further show that careful graphene/substrate annealing ($T\sim 700 ^\circ C$) and consideration of the film/substrate vs film/graphene lattice mismatch are required to obtain epitaxy to the underlying substrate for a variety of other Heusler films, including LaPtSb and GdAuGe. The 30 degree rotated superstructure provides a possible experimental fingerprint of remote epitaxy since it is inconsistent with the leading alternative mechanisms.

cond-mat.mtrl-sci↗

arXiv2022

Free-Standing Epitaxial SrTiO$_3$ Nanomembranes via Remote Epitaxy using Hybrid Molecular Beam Epitaxy

The epitaxial growth of functional materials using a substrate with a graphene layer is a highly desirable method for improving structural quality and obtaining free-standing epitaxial nano-membranes for scientific study, applications, and economical reuse of substrates. However, the aggressive oxidizing conditions typically employed to grow epitaxial perovskite oxides can damage graphene. Here, we demonstrate a technique based on hybrid molecular beam epitaxy that does not require an independent oxygen source to achieve epitaxial growth of complex oxides without damaging the underlying graphene. The technique produces films with self-regulating cation stoichiometry control and epitaxial orientation to the oxide substrate. Furthermore, the films can be exfoliated and transferred to foreign substrates while leaving the graphene on the original substrate. These results open the door to future studies of previously unattainable free-standing nano-membranes grown in an adsorption-controlled manner by hybrid molecular beam epitaxy, and has potentially important implications for the commercial application of perovskite oxides in flexible electronics.

cond-mat.mtrl-sci↗

arXiv2021

Selective area epitaxy of GaAs films using patterned graphene on Ge

We demonstrate selective area epitaxy of GaAs films using patterned graphene masks on a Ge (001) substrate. The GaAs selectively grows on exposed regions of the Ge substrate, for graphene spacings as large as 10 microns. The selectivity is highly dependent on the growth temperature and annealing time, which we explain in terms of temperature dependent sticking coefficients and surface diffusion. The high nucleation selectivity over several microns sets constraints on experimental realizations of remote epitaxy.

cond-mat.mtrl-sci↗

arXiv2021

Quantifying Mn diffusion through transferred versus directly-grown graphene barriers

We quantify the mechanisms for manganese (Mn) diffusion through graphene in Mn/graphene/Ge (001) and Mn/graphene/GaAs (001) heterostructures for samples prepared by graphene layer transfer versus graphene growth directly on the semiconductor substrate. These heterostructures are important for applications in spintronics; however, challenges in synthesizing graphene directly on technologically important substrates such as GaAs necessitate layer transfer and anneal steps, which introduce defects into the graphene. \textit{In-situ} photoemission spectroscopy measurements reveal that Mn diffusion through graphene grown directly on a Ge (001) substrate is 1000 times lower than Mn diffusion into samples without graphene ($D_{gr,direct} \sim 4\times10^{-18}$cm$^2$/s, $D_{no-gr} \sim 5 \times 10^{-15}$ cm$^2$/s at 500$^\circ$C). Transferred graphene on Ge suppresses the Mn in Ge diffusion by a factor of 10 compared to no graphene ($D_{gr,transfer} \sim 4\times10^{-16}cm^2/s$). For both transferred and directly-grown graphene, the low activation energy ($E_a \sim 0.1-0.5$ eV) suggests that Mn diffusion through graphene occurs primarily at graphene defects. This is further confirmed as the diffusivity prefactor, $D_0$, scales with the defect density of the graphene sheet. Similar diffusion barrier performance is found on GaAs substrates; however, it is not currently possible to grow graphene directly on GaAs. Our results highlight the importance of developing graphene growth directly on functional substrates, to avoid the damage induced by layer transfer and annealing.

cond-mat.mtrl-sci↗

arXiv2021

Solid phase epitaxial growth of the correlated-electron transparent conducting oxide SrVO3

SrVO3 thin films with a high figure of merit for applications as transparent conductors were crystallized from amorphous layers using solid phase epitaxy (SPE). Epitaxial SrVO3 films crystallized on SrTiO3 using SPE exhibit a room temperature resistivity of 2.5 x 10-5 Ohms cm, a residual resistivity ratio of 3.8, and visible light transmission above 0.5 for a 60 nm-thick film. SrVO3 layers were deposited at room temperature using radio-frequency sputtering in an amorphous form and subsequently crystallized by heating in controlled gas environment. The lattice parameters and mosaic angular width of x-ray reflections from the crystallized films are consistent with partial relaxation of the strain resulting from the epitaxial mismatch between SrVO3 and SrTiO3. A reflection high-energy electron diffraction study of the kinetics of SPE indicates that crystallization occurs via the thermally activated propagation of the crystalline/amorphous interface, similar to SPE phenomena in other perovskite oxides. Thermodynamic calculations based on density functional theory predict the temperature and oxygen partial pressure conditions required to produce the SrVO3 phase and are consistent with the experiments. The separate control of deposition and crystallization conditions in SPE presents new possibilities for the crystallization of transparent conductors in complex geometries and over large areas.

cond-mat.mtrl-sci↗

arXiv2021

Epitaxy, exfoliation, and strain-induced magnetism in rippled Heusler membranes

Single-crystalline membranes of functional materials enable the tuning of properties via extreme strain states; however, conventional routes for producing membranes require the use of sacrificial layers and chemical etchants, which can both damage the membrane and limit the ability to make them ultrathin. Here we demonstrate the epitaxial growth of the cubic Heusler compound GdPtSb on graphene-terminated Al$_2$O$_3$ substrates. Despite the presence of the graphene interlayer, the Heusler films have epitaxial registry to the underlying sapphire, as revealed by x-ray diffraction, reflection high energy electron diffraction, and transmission electron microscopy. The weak Van der Waals interactions of graphene enable mechanical exfoliation to yield free-standing GdPtSb membranes, which form ripples when transferred to a flexible polymer handle. Whereas unstrained GdPtSb is antiferromagnetic, measurements on rippled membranes show a spontaneous magnetic moment at room temperature, with a saturation magnetization of 5.2 bohr magneton per Gd. First-principles calculations show that the coupling to homogeneous strain is too small to induce ferromagnetism, suggesting a dominant role for strain gradients. Our membranes provide a novel platform for tuning the magnetic properties of intermetallic compounds via strain (piezomagnetixm and magnetostriction) and strain gradients (flexomagnetism).

cond-mat.mtrl-sci↗

arXiv2021

Interfacial Electron-Phonon Coupling Constants Extracted from Intrinsic Replica Bands in Monolayer FeSe/SrTiO$_3$

The observation of replica bands by angle-resolved photoemission spectroscopy has ignited interest in the study of electron-phonon coupling at low carrier densities, particularly in monolayer FeSe/SrTiO$_3$, where the appearance of replica bands has motivated theoretical work suggesting that the interfacial coupling of electrons in the FeSe layer to optical phonons in the SrTiO$_3$ substrate might contribute to the enhanced superconducting pairing temperature. Alternatively, it has also been recently proposed that such replica bands might instead originate from extrinsic final state losses associated with the photoemission process. Here, we perform a quantitative examination of replica bands in monolayer FeSe/SrTiO$_3$, where we are able to conclusively demonstrate that the replica bands are indeed signatures of intrinsic electron-boson coupling, and not associated with final state effects. A detailed analysis of the energy splittings between the higher-order replicas, as well as other self-energy effects, allow us to determine that the interfacial electron-phonon coupling in the system corresponds to a value of $λ= 0.19 \pm 0.02$.

cond-mat.mtrl-sci↗

arXiv2020

Incoherent Cooper pairing and pseudogap behavior in single-layer FeSe/SrTiO$_3$

In many unconventional superconductors, the presence of a pseudogap - a suppression in the electronic density of states extending above the critical temperature - has been a long-standing mystery. Here, we employ combined \textit{in situ} electrical transport and angle-resolved photoemission spectroscopy (ARPES) measurements to reveal an unprecedentedly large pseudogap regime in single-layer FeSe/SrTiO$_3$, an interfacial superconductor where incoherent Cooper pairs are initially formed above $T_Δ$ $\approx$ 60 K, but where a zero resistance state is only achieved below $T_{0}$ $<$ 30 K. We show that this behavior is accompanied by distinct transport signatures of two-dimensional phase fluctuating superconductivity, suggesting a mixed vortex state hosting incoherent Cooper pairs which persist well above the maximum clean limit $T_{c}$ of $\approx$ 40 K. Our work establishes the critical role of reduced dimensionality in driving the complex interplay between Cooper pairing and phase coherence in two-dimensional high-$T_c$ superconductors, providing a paradigm for understanding and engineering higher-$T_{c}$ interfacial superconductors.

cond-mat.supr-con↗

arXiv2020

Semi-adsorption-controlled growth window for half Heusler FeVSb epitaxial films

The electronic, magnetic, thermoelectric, and topological properties of Heusler compounds (composition $XYZ$ or $X_2 YZ$) are highly sensitive to stoichiometry and defects. Here we establish the existence and experimentally map the bounds of a \textit{semi} adsorption-controlled growth window for semiconducting half Heusler FeVSb films, grown by molecular beam epitaxy (MBE). We show that due to the high volatility of Sb, the Sb stoichiometry is self-limiting for a finite range of growth temperatures and Sb fluxes, similar to the growth of III-V semiconductors such as GaSb and GaAs. Films grown within this window are nearly structurally indistinguishable by X-ray diffraction (XRD) and reflection high energy electron diffraction (RHEED). The highest electron mobility and lowest background carrier density are obtained towards the Sb-rich bound of the window, suggesting that Sb-vacancies may be a common defect. Similar \textit{semi} adsorption-controlled bounds are expected for other ternary intermetallics that contain a volatile species $Z=$\{Sb, As, Bi\}, e.g., CoTiSb, LuPtSb, GdPtBi, and NiMnSb. However, outstanding challenges remain in controlling the remaining Fe/V ($X/Y$) transition metal stoichiometry.

cond-mat.mtrl-sci↗

arXiv2020

Electronic correlations in the semiconducting half-Heusler compound FeVSb

Electronic correlations are crucial to the low energy physics of metallic systems with localized $d$ and $f$ states; however, their effect on band insulators and semiconductors is typically negligible. Here, we measure the electronic structure of the half-Heusler compound FeVSb, a band insulator with filled shell configuration of 18 valence electrons per formula unit ($s^2 p^6 d^{10}$). Angle-resolved photoemission spectroscopy (ARPES) reveals a mass renormalization of $m^{*}/m_{bare}= 1.4$, where $m^{*}$ is the measured effective mass and $m_{bare}$ is the mass from density functional theory (DFT) calculations with no added on-site Coulomb repulsion. Our measurements are in quantitative agreement with dynamical mean field theory (DMFT) calculations, highlighting the many-body origin of the mass renormalization. This mass renormalization lies in dramatic contrast to other filled shell intermetallics, including the thermoelectric materials CoTiSb and NiTiSn; and has a similar origin to that in FeSi, where Hund's coupling induced fluctuations across the gap can explain a dynamical self-energy and correlations. Our work calls for a re-thinking of the role of correlations and Hund's coupling in intermetallic band insulators.

cond-mat.mtrl-sci↗

arXiv2020

Strain-stabilized superconductivity

Superconductivity is among the most fascinating and well-studied quantum states of matter. Despite over 100 years of research, a detailed understanding of how features of the normal-state electronic structure determine superconducting properties has remained elusive. For instance, the ability to deterministically enhance the superconducting transition temperature by design, rather than by serendipity, has been a long sought-after goal in condensed matter physics and materials science, but achieving this objective may require new tools, techniques and approaches. Here, we report the first instance of the transmutation of a normal metal into a superconductor through the application of epitaxial strain. We demonstrate that synthesizing RuO$_{2}$ thin films on (110)-oriented TiO$_{2}$ substrates enhances the density of states near the Fermi level, which stabilizes superconductivity under strain, and suggests that a promising strategy to create new transition-metal superconductors is to apply judiciously chosen anisotropic strains that redistribute carriers within the low-energy manifold of $d$ orbitals.

cond-mat.supr-con↗