arXiv subjects

Jason Lim

Publications and source records attributed to Jason Lim.

6 recordsLinked to original sources

arXiv2025

ARCSnake V2: Mechanical Adaptations For An Amphibious Multi-Domain Screw-Propelled Snake-Like Robot

Robotic exploration in extreme environments, such as caves, oceans, and extraplanetary surfaces, poses significant challenges, specifically locomotion across diverse terrains. Conventional wheeled or legged robots often struggle in such contexts due to variability in traction. This paper presents ARCSnake V2, an adaptation of ARCSnake V1 with additional amphibious capabilities for aquatic environments. ARCSnake V2 combines the high mobility of hyper-redundant snake robots with the terrain versatility of Archimedean screw propulsion. Key contributions include a water-sealed mechanical design with serially linked screw and joint actuation, and an integrated buoyancy control system. Extensive experiments validate its underwater capabilities for diving and surfacing, as well as force-regulated actuation. These capabilities position ARCSnake V2 as a versatile platform for exploration, search-and-rescue, and environmental monitoring in multi-domain settings.

cs.RO↗

arXiv2025

Optimal Motion Scaling for Delayed Telesurgery

Robotic teleoperation over long communication distances poses challenges due to delays in commands and feedback from network latency. One simple yet effective strategy to reduce errors and increase performance under delay is to downscale the relative motion between the operating surgeon and the robot. The question remains as to what is the optimal scaling factor, and how this value changes depending on the level of latency as well as operator tendencies. We present user studies investigating the relationship between latency, scaling factor, and performance. The results of our studies demonstrate a statistically significant difference in performance between users and across scaling factors for certain levels of delay. These findings indicate that the optimal scaling factor for a given level of delay is specific to each user, motivating the need for personalized models for optimal performance. We present techniques to model the user-specific mapping of latency level to scaling factor for optimal performance, leading to an efficient and effective solution to optimizing performance of robotic teleoperation and specifically telesurgery under large communication delay.

cs.RO↗

arXiv2024

SURESTEP: An Uncertainty-Aware Trajectory Optimization Framework to Enhance Visual Tool Tracking for Robust Surgical Automation

Inaccurate tool localization is one of the main reasons for failures in automating surgical tasks. Imprecise robot kinematics and noisy observations caused by the poor visual acuity of an endoscopic camera make tool tracking challenging. Previous works in surgical automation adopt environment-specific setups or hard-coded strategies instead of explicitly considering motion and observation uncertainty of tool tracking in their policies. In this work, we present SURESTEP, an uncertainty-aware trajectory optimization framework for robust surgical automation. We model the uncertainty of tool tracking with the components motivated by the sources of noise in typical surgical scenes. Using a Gaussian assumption to propagate our uncertainty models through a given tool trajectory, SURESTEP provides a general framework that minimizes the upper bound on the entropy of the final estimated tool distribution. We compare SURESTEP with a baseline method on a real-world suture needle regrasping task under challenging environmental conditions, such as poor lighting and a moving endoscopic camera. The results over 60 regrasps on the da Vinci Research Kit (dVRK) demonstrate that our optimized trajectories significantly outperform the un-optimized baseline.

cs.RO↗

arXiv2023

NASU -- Novel Actuating Screw Unit: Origami-inspired Screw-based Propulsion on Mobile Ground Robots

Screw-based locomotion is a robust method of locomotion across a wide range of media including water, sand, and gravel. A challenge with screws is their significant number of impactful design parameters that affect locomotion performance. One crucial parameter is the angle of attack (also called the lead angle), which has been shown to significantly impact the performance of screw propellers in terms of traveling velocity, force produced, degree of slip, and sinkage. As a result, the optimal design choice may vary significantly depending on application and mission objectives. In this work, we present the Novel Actuating Screw Unit (NASU). It is the first screw-based propulsion design that enables dynamic reconfiguration of the angle of attack for optimized locomotion across multiple media and use cases. The design is inspired by the kresling unit, a mechanism from origami robotics, and the angle of attack is adjusted with a linear actuator, while the entire unit is spun on its axis to generate propulsion. NASU is integrated into a mobile test bed and experiments are conducted in various media including gravel, grass, and sand. Our experiment results indicate a trade-off between locomotive efficiency and velocity exists in regards to angle of attack, and the proposed design is a promising direction for reconfigurable screws by allowing control to optimize for efficiency or velocity.

cs.RO↗

arXiv2023

Mobility Analysis of Screw-Based Locomotion and Propulsion in Various Media

Robots "in-the-wild" encounter and must traverse widely varying terrain, ranging from solid ground to granular materials like sand to full liquids. Numerous approaches exist, including wheeled and legged robots, each excelling in specific domains. Screw-based locomotion is a promising approach for multi-domain mobility, leveraged in exploratory robotic designs, including amphibious vehicles and snake robotics. However, unlike other forms of locomotion, there is a limited exploration of the models, parameter effects, and efficiency for multi-terrain Archimedes screw locomotion. In this work, we present work towards this missing component in understanding screw-based locomotion: comprehensive experimental results and performance analysis across different media. We designed a mobile test bed for indoor and outdoor experimentation to collect this data. Beyond quantitatively showing the multi-domain mobility of screw-based locomotion, we envision future researchers and engineers using the presented results to design effective screw-based locomotion systems.

cs.RO↗

arXiv2022

An apparatus for in-vacuum loading of nanoparticles into an optical trap

We describe the design, construction, and operation of an apparatus utilizing a piezoelectric transducer for in-vacuum loading of nanoparticles into an optical trap for use in levitated optomechanics experiments. In contrast to commonly used nebulizer-based trap-loading methods which generate aerosolized liquid droplets containing nanoparticles, the method produces dry aerosols of both spherical and high-aspect ratio particles ranging in size by approximately two orders of mangitude. The device has been shown to generate accelerations of order $10^7$ $g$, which is sufficient to overcome stiction forces between glass nanoparticles and a glass substrate for particles as small as $170$ nm diameter. Particles with sizes ranging from $170$ nm to $\sim 10$ $\mu$m have been successfully loaded into optical traps at pressures ranging from $1$ bar to $0.6$ mbar. We report the velocity distribution of the particles launched from the substrate and our results indicate promise for direct loading into ultra-high-vacuum with sufficient laser feedback cooling. This loading technique could be useful for the development of compact fieldable sensors based on optically levitated nanoparticles as well as matter-wave interference experiments with ultra-cold nano-objects which rely on multiple repeated free-fall measurements and thus require rapid trap re-loading in high vacuum conditions.

physics.optics↗