arXiv subjects

Javier Garcia-Barriocanal

Publications and source records attributed to Javier Garcia-Barriocanal.

11 recordsLinked to original sources

arXiv2026

Tuning charge-transport properties and magnetic order in metallic EuTiO$_{3-δ}$

The stoichiometric antiferromagnetic insulator EuTiO$_3$ is proximate to a ferroelectric phase. Whereas cation substitution has been used as a tuning parameter to introduce charge carriers and manipulate the magnetism, the effects of oxygen-vacancy doping have been less explored. Here we report a detailed study of the charge transport and magnetic properties of metallic, oxygen-vacancy-doped EuTiO$_{3-δ}$. Using CaH$_2$ as an oxygen getter to achieve a higher carrier concentration than previously reported, we find that the phase diagram of the oxygen-vacancy-doped system is distinct from that obtained via cation doping. In particular, we uncover a change from antiferromagnetic to ferromagnetic order in the metallic state, with a maximum Curie temperature of TC $\approx$ 11 K at the highest carrier concentration of n $\approx$ 10$^{21}$ cm$^{-3}$. These findings are supported by density functional theory calculations, which indicate a significant change in the nearest-neighbor magnetic exchange constant with increasing electron doping. We also present x-ray diffuse scattering and complementary first-principles results that reveal that, similar to the prominent incipient ferroelectric perovskite SrTiO$_3$, the data for EuTiO$_3$ are consistent with thermal diffuse scattering and with the absence of quasi-elastic contributions. Finally, we report specific heat measurements that confirm the magnetic transition temperatures deduced from magnetization measurements and corroborate the lattice dynamics picture inferred from the diffuse scattering data.

cond-mat.mtrl-sci↗

arXiv2024

Giant spin Hall effect with multi-directional spin components in Ni4W

Spin-orbit torque (SOT) can be used to efficiently manipulate the magnetic state of magnetic materials, which is an essential element for memory and logic applications. Due to symmetry constraints, only in-plane spins can be injected into the ferromagnet from the underlying SOT layer for conventional SOT materials such as heavy metals and topological materials. Through the use of materials with low symmetries, or other symmetry breaking approaches, unconventional spin currents with out-of-plane polarization has been demonstrated and enabled field-free deterministic switching of perpendicular magnetization. Despite this progress, the SOT efficiency of these materials has typically remained low. Here, we report a giant SOT efficiency of 0.85 in sputtered Ni4W/CoFeB heterostructure at room temperature, as evaluated by second harmonic Hall measurements. In addition, due to the low crystal symmetry of Ni4W, unconventional out-of-plane and Dresselhaus-like spin components were observed. Macro-spin simulation suggests our spin Hall tensor to provide about an order of magnitude improvement in the magnetization switching efficiency, thus broadening the path towards energy efficient spintronic devices using low-symmetry materials.

cond-mat.mes-hall↗

arXiv2023

Crystal-Chemical Origins of the Ultrahigh Conductivity of Metallic Delafossites

Despite their highly anisotropic complex-oxidic nature, certain delafossite compounds (e.g., PdCoO2, PtCoO2) are the most conductive oxides known, for reasons that remain poorly understood. Their room-temperature conductivity can exceed that of Au, while their low-temperature electronic mean-free-paths reach an astonishing 20 microns. It is widely accepted that these materials must be ultrapure to achieve this, although the methods for their growth (which produce only small crystals) are not typically capable of such. Here, we first report a new approach to PdCoO2 crystal growth, using chemical vapor transport methods to achieve order-of-magnitude gains in size, the highest structural qualities yet reported, and record residual resistivity ratios (>440). Nevertheless, the first detailed mass spectrometry measurements on these materials reveal that they are not ultrapure, typically harboring 100s-of-parts-per-million impurity levels. Through quantitative crystal-chemical analyses, we resolve this apparent dichotomy, showing that the vast majority of impurities are forced to reside in the Co-O octahedral layers, leaving the conductive Pd sheets highly pure (~1 ppm impurity concentrations). These purities are shown to be in quantitative agreement with measured residual resistivities. We thus conclude that a previously unconsidered "sublattice purification" mechanism is essential to the ultrahigh low-temperature conductivity and mean-free-path of metallic delafossites.

cond-mat.mtrl-sci↗

arXiv2023

Competing Uniaxial Anisotropies in Epitaxial Fe Thin Films Grown on InAs(001)

We report on the interplay of two uniaxial magnetic anisotropies in epitaxial Fe thin films of varying thickness grown on InAs(001) as observed in ferromagnetic resonance experiments. One anisotropy originates from the Fe/InAs interface while the other originates from in-plane shear strain resulting from the anisotropic relaxation of the Fe film. X-ray diffraction was used to measure the in-plane lattice constants of the Fe films, confirming the correlation between the onset of film relaxation and the corresponding shear strain inferred from ferromagnetic resonance data. These results are relevant for ongoing efforts to develop spintronic and quantum devices utilizing large spin-orbit coupling in III-V semiconductors.

cond-mat.mtrl-sci↗

arXiv2022

Electrochemically-driven insulator-metal transition in ionic-liquid-gated antiferromagnetic Mott-insulating NiS$_2$ single crystals

Motivated by the existence of superconductivity in pyrite-structure CuS$_2$, we explore the possibility of ionic-liquid-gating-induced superconductivity in the proximal antiferromagnetic Mott insulator NiS$_2$. A clear gating-induced transition from a two-dimensional insulating state to a three-dimensional metallic state is observed at positive gate bias on single crystal surfaces. No evidence for superconductivity is observed down to the lowest measured temperature of 0.45 K, however. Based on transport, energy-dispersive X-ray spectroscopy, X-ray photoelectron spectroscopy, atomic force microscopy, and other techniques, we deduce an electrochemical gating mechanism involving a substantial decrease in the S:Ni ratio (over hundreds of nm), which is both non-volatile and irreversible. This is in striking contrast to the reversible, volatile, surface-limited, electrostatic gate effect in pyrite FeS$_2$. We attribute this stark difference in electrochemical vs. electrostatic gating response in NiS$_2$ and FeS$_2$ to the much larger S diffusion coefficient in NiS$_2$, analogous to the different behaviors observed among electrolyte-gated oxides with differing O-vacancy diffusivities. The gating irreversibility, on the other hand, is associated with the lack of atmospheric S; this is in contrast to the better understood oxide case, where electrolysis of atmospheric H$_2$O provides an O reservoir. This study of NiS$_2$ thus provides new insight into electrolyte gating mechanisms in functional materials, in a previously unexplored limit.

cond-mat.mtrl-sci↗

arXiv2021

Large field-like torque in amorphous Ru2Sn3 originated from the intrinsic spin Hall effect

We investigated temperature dependent current driven spin-orbit torques in magnetron sputtered Ru2Sn3 (4 and 10 nm) /Co20Fe60B20 (5 nm) layered structures with in-plane magnetic anisotropy. The room temperature damping-like and field-like spin torque efficiencies of the amorphous Ru2Sn3 films were measured to be 0.14 +- 0.008 (0.07 +- 0.012) and -0.03 +- 0.006 (-0.20 +- 0.009), for the 4 (10 nm) films respectively, by utilizing the second harmonic Hall technique. The large field-like torque in the relatively thicker Ru2Sn3 (10 nm) thin film is unique compared to the traditional spin Hall materials interfaced with thick magnetic layers with in-plane magnetic anisotropy which typically have dominant damping-like and negligible field-like torques. Additionally, the observed room temperature field-like torque efficiency in Ru2Sn3 (10 nm)/CoFeB (5 nm) is up to three times larger than the damping-like torque (-0.20 +- 0.009 and 0.07 +- 0.012, respectively) and thirty times larger at 50 K (-0.29 +- 0.014 and 0.009 +- 0.017, respectively). The temperature dependence of the field-like torques show dominant contributions from the intrinsic spin Hall effect while the damping-like torques show dominate contributions from the extrinsic spin Hall effects, skew scattering and side jump. Through macro-spin calculations, we found that including field-like torques on the order or larger than the damping-like torque can reduce the switching critical current and decrease magnetization procession for a perpendicular ferromagnetic layer.

cond-mat.mes-hall↗

arXiv2019

Infinite-randomness fixed point of the quantum superconductor-metal transitions in amorphous thin films

The magnetic-field-tuned quantum superconductor-insulator transitions of disordered amorphous indium oxide films are a paradigm in the study of quantum phase transitions, and exhibit power-law scaling behavior. For superconducting indium oxide films with low disorder, such as the ones reported on here, the high-field state appears to be a quantum-corrected metal. Resistance data across the superconductor-metal transition in these films are shown here to obey an activated scaling form appropriate to a quantum phase transition controlled by an infinite randomness fixed point in the universality class of the random transverse-field Ising model. Collapse of the field-dependent resistance vs. temperature data is obtained using an activated scaling form appropriate to this universality class, using values determined through a modified form of power-law scaling analysis. This exotic behavior of films exhibiting a superconductor-metal transition is caused by the dissipative dynamics of superconducting rare regions immersed in a metallic matrix, as predicted by a recent renormalization group theory. The smeared crossing points of isotherms observed are due to corrections to scaling which are expected near an infinite randomness critical point, where the inverse disorder strength acts as an irrelevant scaling variable.

cond-mat.supr-con↗

arXiv2018

Probing the electric field-induced doping mechanism in YBa2Cu3O7 using computed Cu K-edge x-ray absorption spectra

We recently demonstrated that the superconductor-to-insulator transition induced by ionic liquid gating of the high temperature superconductor YBa2Cu3O7 (YBCO) is accompanied by a deoxygenation of the sample [Perez-Munoz et al., PNAS 114, 215 (2017)]. DFT calculations helped establish that the pronounced changes in the spectral features of the Cu K-edge absorption spectra measured in situ during the gating experiment arise from a decrease of the Cu coordination within the CuO chains. In this work, we provide a detailed analysis of the electronic structure origin of the changes in the spectra resulting from three different types of doping: i) the formation of oxygen vacancies within the CuO chains, ii) the formation of oxygen vacancies within the CuO2 planes and iii) the electrostatic doping. For each case, three stoichiometries are studied and compared to the stoichiometric YBa2Cu3O7, i.e YBa2Cu3O6.75, YBa2Cu3O6.50 and YBa2Cu3O6.25. Computed vacancy formation energies further support the chain-vacancy mechanism. In the case of doping by vacancies within the chains, we study the effect of oxygen ordering on the spectral features and we clarify the connection between the polarization of the x-rays and this doping mechanism. Finally, the inclusion of the Hubbard U correction on the computed spectra for antiferromagnetic YBa2Cu3O6.25 is discussed.

cond-mat.mtrl-sci↗

arXiv2011

Indications of an Electronic Phase Transition in 2D YBa2Cu3O7-x Induced by Electrostatic Doping

We successfully tuned an underdoped ultrathin YBa2Cu3O7-x film into the overdoped regime by means of electrostatic doping using an ionic liquid as a dielectric material. This process proved to be reversible. Transport measurements showed a series of anomalous features compared to chemically doped bulk samples and a different two-step doping mechanism for electrostatic doping was revealed. The normal resistance increased with carrier concentration on the overdoped side and the high temperature (180 K) Hall number peaked at a doping level of p$\sim$0.15. These anomalous behaviors suggest that there is an electronic phase transition in the Fermi surface around the optimal doping level.

cond-mat.supr-con↗

arXiv2011

Electrostatic Control of the Evolution from Superconductor to Insulator in Ultrathin Films of Yttrium Barium Copper Oxide

The electrical transport properties of ultrathin YBCO films have been modified using an electric double layer transistor configuration employing an ionic liquid. The films were grown on SrTiO3 substrates using high pressure oxygen sputtering. A clear evolution from superconductor to insulator was observed in nominally 7 unit cell thick films. Using a finite size scaling analysis, curves of resistance versus temperature, R(T), over the temperature range from 6K to 22K were found to collapse onto a single scaling function, which suggests the the presence of a quantum critical point. However the scaling failed at the lowest temperatures suggesting the presence of an additional phase between the superconducting and insulating regimes.

cond-mat.supr-con↗

arXiv2008

Thickness dependent magnetic anisotropy of ultrathin LCMO epitaxial thin films

The magnetic properties of La0.7Ca0.3MnO3 (LCMO) manganite thin films were studied with magnetometry and ferromagnetic resonance as a function of film thickness. They maintain the colossal magnetoresistance behavior with a pronounced metal-insulator transition around 150-200 K, except for the very thinnest films studied (3 nm). Nevertheless, LCMO films as thin as 3 nm remain ferromagnetic, without a decrease in saturation magnetization, indicating an absence of dead-layers, although below approx. 6 nm the films remain insulating at low temperature. Magnetization hysteresis loops reveal that the magnetic easy axes lie in the plane of the film for thicknesses in the range of 4-15 nm. Ferromagnetic resonance studies confirm that the easy axes are in-plane, and find a biaxial symmetry in-plane with two, perpendicular easy axes. The directions of the easy axes with respect to the crystallographic directions of the cubic SrTiO3 substrate differ by 45 degrees in 4 nm and 15 nm thick LCMO films.

cond-mat.str-el↗