SearcharxivSearch

arXiv subjects

Jay A. Gupta

Publications and source records attributed to Jay A. Gupta.

16 recordsLinked to original sources

Broken site symmetry of Fe adatoms on Bi$_2$Te$_3$

We report a combined scanning tunneling microscopy and atomistic theoretical study of Fe adatoms on the Bi$_2$Te$_3$(111) surface. Topographic imaging at $4.5$~K shows that Fe adatoms in fcc and hcp hollow sites exhibit a threefold-symmetric contrast, consistent with the $C_{3v}$ symmetry of the adsorption site. However, simultaneously acquired differential conductance ($dI/dV$) maps reveal a pronounced reduction in symmetry, evidenced by differential contrast observed at nearest-neighbor Te sites. Density functional theory calculations show that the Fe/Bi$_2$Te$_3$ system undergoes a static Jahn--Teller distortion, reducing the adsorption symmetry from $C_{3v}$ to $C_{1v}$, with the distorted configuration favored by $72.5$~meV. Orbital-projected density of states calculations show that the occupied states near the Fermi level are dominated by $d_{xz}$ and $d_{yz}$ orbitals, whereas the unoccupied states are primarily of $d_{z^2}$, $d_{x^2-y^2}$, and $d_{xy}$ character. The local density of states from these orbitals is in good qualitative agreement with experimental $dI/dV$ spectra. Furthermore, simulated local-density-of-states maps using a tight-binding Green's function approach are consistent with experimental $dI/dV$ maps, confirming that the reduced symmetry originates from the $C_{1v}$ structural distortion.

cond-mat.mes-hall

Modifying the Optical Emission of Vanadyl Phthalocyanine via Molecular Self-Assembly on van der Waals Materials

Vanadyl phthalocyanine (VOPc) is a promising organic molecule for applications in quantum information because of its thermal stability, efficient processing, and potential as a spin qubit. The deposition of VOPc in different molecular orientations allows the properties to be customized for integration into various devices. However, such customization has yet to be fully leveraged to alter its intrinsic properties, particularly optical emission. Normally, VOPc films on dielectric substrates emit a broad photoluminescence peak in the near-infrared range, attributed to transitions in the Pc ring from its pi orbital structure. In this work, we demonstrate that the dominant optical transition of VOPc can be shifted by over 250 meV through the controlled deposition of thin films on van der Waals material substrates. The weak interactions with van der Waals materials allow the molecules to uniquely self-assemble, resulting in modified optical behavior modulated by molecular phase and thickness. This work connects the self-assembling properties of molecules with their altered electronic structures and the resulting optical emission.

cond-mat.mtrl-sci

Scanning Tunneling Microscope Tip-Induced Formation of Bi Bilayers on Bi$_2$Te$_3$

We report the formation of Bi(111) bilayer (BL) islands and crater structures on Bi$_2$Te$_3$(111) surfaces induced by voltage pulses from an STM tip. Pulses above a threshold voltage ($+3$ V) produce craters $\sim 0.5$ microns in diameter, similar to the size of the tip. Redeposited material self-assembles into a network of atomically ordered islands with a lattice constant identical to the underlying Bi$_2$Te$_3$ surface. The island size monotonically decreases over several microns from the pulse site, until the pristine Bi$_2$Te$_3$ surface is recovered. We assign these islands to Bi BL based on atomic resolution images, analysis of step heights, and tunneling spectroscopy. The dependence of bilayer formation on bias polarity and the evidence for defect diffusion together suggest a mechanism driven by the interplay of field evaporation and tunneling-current-induced Joule heating.

cond-mat.mes-hall

MacroQueue: Automating Measurements in High-Dimensional Parameter Spaces

Laboratory measurements often use several instruments to fully explore the relevant parameter space; such as, an external lock-in amplifier, an electromagnet, an RF generator, etc.. Ordinarily, these instruments have to be individually controlled and their parameters have to be manually recorded. MacroQueue enables effortless measurements throughout these high-dimensional parameter space systems. MacroQueue is a modular software designed for controlling and automating various laboratory equipment in sync without requiring coding ability. Currently, it includes functions to control the 3 major commercial scanning tunneling microscopes, CreaTec, RHK, and Scienta Omicron in combination with any other instruments that are a part of the systems. It can be extended to control any instrument that can be controlled via Python.

physics.ins-det

Scanning Tunneling Microscopy Study of Epitaxial Fe3GeTe2 Monolayers on Bi2Te3

Introducing magnetism to the surface state of topological insulators, such as Bi2Te3, can lead to a variety of interesting phenomena. We use scanning tunneling microscopy (STM) to study a single quintuple layer (QL) of the van der Waals magnet Fe3GeTe2 (FGT) that is grown on Bi2Te3 via molecular beam epitaxy. STM topographic images show that the FGT grows as free-standing islands on Bi2Te3 and outwards from Bi2Te3 steps. Atomic resolution imaging shows atomic lattices of 390 +- 10 pm for FGT and 430 +- 10 pm for Bi2Te3, consistent with the respective bulk crystals. A moiré pattern is observed on FGT regions with a periodicity of 4.3 +- 0.4 nm that can be attributed solely to this lattice mismatch and thus indicates zero rotational misalignments. While most of the surface is covered by a single QL of the FGT, there are small double QL regions, as well as regions with distinct chemical terminations due to an incomplete QL. The most common partial QL surface termination is the FeGe layer, in which the top two atomic layers are missing. This termination has a distinctive electronic structure and a (sqrt3 x sqrt3)R30 reconstruction overlaid on the moiré pattern in STM images. Magnetic circular dichroism (MCD) measurements confirm these thin FGT films are ferromagnetic with TC ~190 K.

cond-mat.mtrl-sci

Observation of Skyrmion Bubbles in Multilayer [Pt/Co/Cu]n using spin-polarized STM

Magnetic multilayers are a promising platform for storage and logic devices based on skyrmion spin textures, due to the large materials phase space for tuning properties. Epitaxial superlattice structures of [Pt/Co/Cu]n thin films were grown by molecular beam epitaxy at room temperature. Spin-polarized scanning tunneling microscopy (SP-STM) of these samples was used to probe the connection between surface structure and skyrmion morphology with nanoscale spatial resolution. Irregular-shaped skyrmion bubbles were observed, with effective diameters from 20-200 nm that are much larger than the nanoscale grain structure of the surface topography. Nucleation, annihilation, and motion of skyrmion bubbles could be driven using the stray field of the ferromagnetic tip in repeated imaging, and spin-polarized current/voltage pulses. Our detailed comparison of STM topography and differential conductance images shows that there are no surface defects or inhomogeneities at length scales that could account for the range in skyrmion bubble size or shape observed in the measurements.

cond-mat.mtrl-sci

An Atomically Tailored Chiral Magnet with Small Skyrmions at Room Temperature

Creating materials that do not exist in nature can lead to breakthroughs in science and technology. Magnetic skyrmions are topological excitations that have attracted great attention recently for their potential applications in low power, ultrahigh density memory. A major challenge has been to find materials that meet the dual requirement of small skyrmions stable at room temperature. Here we meet both these goals by developing epitaxial FeGe films with excess Fe using atomic layer molecular beam epitaxy (MBE) far from thermal equilibrium. Our novel atomic layer design permits the incorporation of 20% excess Fe while maintaining a non-centrosymmetric crystal structure supported by theoretical calculations and necessary for stabilizing skyrmions. We show that the Curie temperature is well above room temperature, and that the skyrmions probed by topological Hall effect have sizes down to 15 nm as imaged by Lorentz transmission electron microscopy (LTEM) and magnetic force microscopy (MFM). Our results illustrate new avenues for creating artificial materials tailored at the atomic scale that can impact nanotechnology.

cond-mat.mtrl-sci

Kinetically-controlled epitaxial growth of Fe$_3$GeTe$_2$ van der Waals ferromagnetic films

We demonstrate that kinetics play an important role in the epitaxial growth of Fe$_3$GeTe$_2$ (FGT) van der Waals (vdW) ferromagnetic films by molecular beam epitaxy. By varying the deposition rate, we control the formation or suppression of an initial tellurium-deficient non-van der Waals phase (Fe$_3$Ge$_2$) prior to realizing epitaxial growth of the vdW FGT phase. Using cross-sectional scanning transmission electron microscopy and scanning tunneling microscopy, we optimize the FGT films to have atomically smooth surfaces and abrupt interfaces with the Ge(111) substrate. The magnetic properties of our high quality material are confirmed through magneto-optic, magnetotransport, and spin-polarized STM studies. Importantly, this demonstrates how the interplay of energetics and kinetics can help tune the re-evaporation rate of chalcogen atoms and interdiffusion from the underlayer, which paves the way for future studies of van der Waals epitaxy.

cond-mat.mtrl-sci

Atomic scale visualization of topological spin textures in the chiral magnet MnGe

Spin polarized scanning tunneling microscopy is used to directly image topological magnetic textures in thin films of MnGe, and to correlate the magnetism with structure probed at the atomic-scale. Our images indicate helical stripe domains, each characterized by a single wavevector Q, and their associated helimagnetic domain walls, in contrast to the 3Q magnetic state seen in the bulk. Combining our surface measurements with micromagnetic modeling, we deduce the three-dimensional orientation of the helical wavevectors and gain detailed understanding of the structure of individual domain walls and their intersections. We find that three helical domains meet in two distinct ways to produce either a "target-like" or a "pi-like" topological spin texture, and correlate these with local strain on the surface. We further show that the target-like texture can be reversibly manipulated through either current/voltage pulsing or applied magnetic field, a promising step toward future applications.

cond-mat.mes-hall

Tunable tunnel barriers in a semiconductor via ionization of individual atoms

We report scanning tunneling microscopy studies of individual adatoms deposited on an InSb(110) surface. The adatoms can be reproducibly dropped off from the STM tip by voltage pulses, and impact tunneling into the surface by up to ~100x. The spatial extent and magnitude of the tunneling effect are widely tunable by imaging conditions such as bias voltage, set current and photoillumination. We attribute the effect to occupation of a (+/0) charge transition level, and switching of the associated adatom-induced band bending. The effect in STM topographic images is well reproduced by transport modeling of filling and emptying rates as a function of the tip position. STM atomic contrast and tunneling spectra are in good agreement with density functional theory calculations for In adatoms. The adatom ionization effect can extend to distances greater than 50 nm away, which we attribute to the low concentration and low binding energy of the residual donors in the undoped InSb crystal. These studies demonstrate how individual atoms can be used to sensitively control current flow in nanoscale devices.

cond-mat.mes-hall

Chemical Migration and Dipole Formation at van der Waals Interfaces between Magnetic Transition Metal Chalcogenides and Topological Insulators

Metal and magnetic overlayers alter the surface of the topological insulator (TI) bismuth selenide (Bi$_2$Se$_3$) through proximity effects but also by changing the composition and chemical structure of the Bi$_2$Se$_3$ sub-surface. The interface between Bi$_2$Se$_3$ and Mn metal or manganese selenide was explored using x-ray photoelectron spectroscopy (XPS) revealing chemical and electronic changes at the interface. Depositing Mn metal on Bi$_2$Se$_3$ without an external source of Se shows unexpected bonding within the Mn layer due to Mn-Se bonding as Se diffuses out of the Bi$_2$Se$_3$ layer into the growing Mn film. The Se out-diffusion is further evidenced by changes in Bi core levels within the Bi$_2$Se$_3$ layers indicating primarily Bi-Bi bonding over Bi-Se bonding. No out-diffusion of Se occurred when excess Se is supplied with Mn, indicating the importance of supplying enough chalcogen atoms with deposited metals. However, Bi$_2$Se$_3$ core level photoelectrons exhibited a rigid chemical shift toward higher binding energy after depositing a monolayer of MnSe$_{2-x}$, indicating a dipole within the overlayer. Stoichiometry calculations indicated that the monolayer forms MnSe preferentially over the transition metal dichalcogenide (TMD) phase MnSe$_2$, providing a consistent picture of the dipole formation in which a plane of Se anions sits above Mn cations. This study shows that chemical diffusion and dipole formation are important for Mn-Bi$_2$Se$_3$ and MnSe$_{2-x}$-Bi$_2$Se$_3$ and should be considered carefully for TMD/TI interfaces more generally.

cond-mat.mtrl-sci

Coherent Growth and Characterization of van der Waals 1T-VSe$_2$ Layers on GaAs(111)B Using Molecular Beam Epitaxy

We report epitaxial growth of vanadium diselenide (VSe$_2$) thin films in the octahedrally-coordinated (1T) structure on GaAs(111)B substrates by molecular beam epitaxy. Film thickness from a single monolayer (ML) up to 30 ML is demonstrated. Structural and chemical studies using by x-ray diffraction, transmission electron microscopy, scanning tunneling microscopy and x-ray photoelectron spectroscopy indicate high quality thin films. Further studies show that monolayer VSe$_2$ films on GaAs are not air-stable and are susceptible to oxidation within a matter of hours, which indicates that a protective capping layer should be employed for device applications. This work demonstrates that VSe$_2$, a candidate van der Waals material for possible spintronic and electronic applications, can be integrated with III-V semiconductors via epitaxial growth for 2D/3D hybrid devices.

cond-mat.mtrl-sci

Magnetic Properties and Electronic Structure of Magnetic Topological Insulator MnBi$_2$Se$_4$

The intrinsic magnetic topological insulators MnBi$_2$X$_4$ (X = Se, Te) are promising candidates in realizing various novel topological states related to symmetry breaking by magnetic order. Although much progress had been made in MnBi$_2$Te$_4$, the study of MnBi$_2$Se$_4$ has been lacking due to the difficulty of material synthesis of the desired trigonal phase. Here, we report the synthesis of multilayer trigonal MnBi$_2$Se$_4$ with alternating-layer molecular beam epitaxy. Atomic-resolution scanning transmission electron microscopy (STEM) and scanning tunneling microscopy (STM) identify a well-ordered multilayer van der Waals (vdW) crystal with septuple-layer base units in agreement with the trigonal structure. Systematic thickness-dependent magnetometry studies illustrate the layered antiferromagnetic ordering as predicted by theory. Angle-resolved photoemission spectroscopy (ARPES) reveals the gapless Dirac-like surface state of MnBi$_2$Se$_4$, which demonstrates that MnBi$_2$Se$_4$ is a topological insulator above the magnetic ordering temperature. These systematic studies show that MnBi$_2$Se$_4$ is a promising candidate for exploring the rich topological phases of layered antiferromagnetic topological insulators.

cond-mat.mtrl-sci

STM and DFT studies of CO2 adsorption on Cu(100)-O surface

We characterized CO2 adsorption and diffusion on the missing row reconstructed Cu(100)-O surface using a combination of scanning tunneling microscopy (STM) and density functional theory (DFT) calculations with dispersion. We deposited CO2 molecules in situ at 5K, which allowed us to unambiguously identify individual CO2 molecules and their adsorption sites. Based on a comparison of experimental and DFT-generated STM images, we find that the CO2 molecules sit in between the O atoms in the missing row reconstructed Cu(100)-O surface. The CO2 molecules are easily perturbed by the STM tip under typical imaging conditions, suggesting that the molecules are weakly bound to the surface. The calculated adsorption energy, vibrational modes, and diffusion barriers of the CO2 molecules also indicate weak adsorption, in qualitative agreement with the experiments. A comparison of tunneling spectroscopy and DFT-calculated density of states shows that the primary change near the Fermi level is associated with changes to the surface states with negligible contribution from the CO2 molecular states.

cond-mat.mes-hall

Topological Dirac Semimetal Na3Bi Films in the Ultrathin Limit via Alternating Layer Molecular Beam Epitaxy

Ultrathin films of Na3Bi on insulating substrates are desired for opening a bulk band gap and generating the quantum spin Hall effect from a topological Dirac semimetal, though continuous films in the few nanometer regime have been difficult to realize. Here, we utilize alternating layer molecular beam epitaxy (MBE) to achieve uniform and continuous single crystal films of Na3Bi(0001) on insulating Al2O3(0001) substrates and demonstrate electrical transport on films with 3.8 nm thickness (4 unit cells). The high material quality is confirmed through in situ reflection high-energy electron diffraction (RHEED), scanning tunneling microscopy (STM), x-ray diffraction (XRD), and x-ray photoelectron spectroscopy (XPS). In addition, these films are employed as seed layers for subsequent growth by codeposition, leading to atomic layer-by-layer growth as indicated by RHEED intensity oscillations. These material advances facilitate the pursuit of quantum phenomena in thin films of Dirac semimetals.

cond-mat.mtrl-sci

Room Temperature Intrinsic Ferromagnetism in Epitaxial Manganese Selenide Films in the Monolayer Limit

Monolayer van der Waals (vdW) magnets provide an exciting opportunity for exploring two-dimensional (2D) magnetism for scientific and technological advances, but the intrinsic ferromagnetism has only been observed at low temperatures. Here, we report the observation of room temperature ferromagnetism in manganese selenide (MnSe$_x$) films grown by molecular beam epitaxy (MBE). Magnetic and structural characterization provides strong evidence that in the monolayer limit, the ferromagnetism originates from a vdW manganese diselenide (MnSe$_2$) monolayer, while for thicker films it could originate from a combination of vdW MnSe$_2$ and/or interfacial magnetism of $α$-MnSe(111). Magnetization measurements of monolayer MnSe$_x$ films on GaSe and SnSe$_2$ epilayers show ferromagnetic ordering with large saturation magnetization of ~ 4 Bohr magnetons per Mn, which is consistent with density functional theory calculations predicting ferromagnetism in monolayer 1T-MnSe$_2$. Growing MnSe$_x$ films on GaSe up to high thickness (~ 40 nm) produces $α$-MnSe(111), and an enhanced magnetic moment (~ 2x) compared to the monolayer MnSe$_x$ samples. Detailed structural characterization by scanning transmission electron microscopy (STEM), scanning tunneling microscopy (STM), and reflection high energy electron diffraction (RHEED) reveal an abrupt and clean interface between GaSe(0001) and $α$-MnSe(111). In particular, the structure measured by STEM is consistent with the presence of a MnSe$_2$ monolayer at the interface. These results hold promise for potential applications in energy efficient information storage and processing.

cond-mat.mtrl-sci