arXiv subjects

Jean Tapie

Publications and source records attributed to Jean Tapie.

9 recordsLinked to original sources

arXiv2026

Non-Reciprocal Dynamic Metasurface Antenna: Practical Multiport-Network Modeling and Optimization for Multi-User Interference Resilience

Channel reciprocity fundamentally limits full-duplex (FD) base stations due to multi-user co-channel interference. We examine the potential of deploying a non-reciprocal dynamic metasurface antenna (NR-DMA) at the base station to overcome this limitation. Our NR-DMA architecture connects a single circulator to three feed ports of a multi-feed DMA with strong mutual coupling (MC) between its seven feeds and 96 1-bit-programmable meta-elements. We model our system with multiport network theory, using experimentally estimated proxy parameters of a fabricated 19-GHz DMA and the measured circulator response. Our NR-DMA's reconfigurability is captured by a diagonal tunable scattering matrix, showing that non-reciprocal DMAs and RISs need not require a "beyond-diagonal" tunable scattering matrix. We jointly optimize the DMA state, analog feed weights, circulator-port assignment, and circulation direction. Our optimized NR-DMA realizes distinct forward and reverse channel responses. In our interference-limited high-SNR case study, the NR-DMA improves the FD sum rate by about 60% over a reciprocal DMA benchmark. Comparisons with proxy objectives and MC-unaware optimization show that end-to-end FD optimization and MC-aware modeling are both essential.

eess.SP↗

arXiv2026

Optimizing Dynamic Metasurface Antenna Configurations for Direction-of-Arrival and Polarization Estimation Using an Experimentally Calibrated Multiport-Network Model

Sensing the direction of arrival and polarization of impinging signals is a key prerequisite for beamforming and interference mitigation in modern wireless communication systems. Dynamic metasurface antennas (DMAs) can multiplex direction- and polarization-dependent field information onto a single detector by sequentially switching between programmable configurations. This makes DMAs attractive for joint direction-of-arrival and polarization (DoA-P) estimation with a single radio-frequency chain. Experimental demonstrations have so far relied on random pre-measured configuration sequences because optimizing the configurations requires an accurate forward model of the fabricated DMA. Here, we use an experimentally calibrated model based on multiport-network theory (MNT) to optimize DMA configuration sequences for DoA-P estimation. Our experimentally calibrated MNT model predicts the dual-polarized far-field response of our 96-element DMA for arbitrary admissible configurations, enabling model-based optimization without additional radiation-pattern measurements. We optimize sequences using effective-rank-based surrogate objectives and compare them with random sequences as a function of the sequence length and the noise level. The optimized sequences yield the largest gains in the intermediate-SNR and intermediate-sequence-length regime, where the inverse problem is neither noise-limited nor already solved by random diversity. We also tackle a dual-source scenario involving a jammer and a desired transmitter. Our results illustrate some of the potential in the context of jamming-resilient communications that is unlocked by experimentally calibrated MNT models for fabricated DMAs.

eess.SP↗

arXiv2026

Channel Estimation via Tensor Decomposition for Dynamic Metasurface Antennas with Known Mutual Coupling: Algorithms and Experiments

Dynamic metasurface antennas (DMAs) are an emerging hybrid-MIMO technology distinguished by an ultrathin form factor, low cost, and low power consumption. In real-world DMA prototypes, mutual coupling (MC) between meta-elements is generally non-negligible; some architectures even deliberately exploit strong MC to enhance wave-domain flexibility. In this paper, we address channel estimation (CE) for DMAs with known MC by formulating it as a tensor-decomposition problem. We develop a generalized block Tucker alternating least squares (BTALS) algorithm, together with specialized variants for cases with known direct and/or feed channel. We also develop a reciprocity-aware bilinear factorization method for the case with known direct channel. We experimentally validate our algorithms using an 18 GHz DMA prototype whose 7 feeds and 96 meta-elements are strongly coupled via a chaotic cavity. Our general BTALS algorithm reaches an accuracy of 43.1 dB, only 0.3 dB below the upper bound imposed by experimental noise. All proposed algorithms generally outperform the prior-art reference scheme thanks to the superior noise rejection enabled by the tensor-based framework. We further study the minimum number of required measurements as a function of the number of feeds and demonstrate the importance of MC awareness by comparison with an MC-unaware benchmark. Finally, we apply BTALS to a second setup enabling the prediction of the DMA's full dual-polarization 3D radiation diagram. We also measure the latter for DMA configurations optimized for channel-gain enhancement based on the estimated channels. Altogether, our work establishes the practical relevance of MC-aware tensor methods; beyond DMAs, it applies to all wireless systems with wave-domain programmability enabled by tunable lumped elements.

eess.SP↗

arXiv2025

Experimental Multiport-Network Parameter Estimation for a Dynamic Metasurface Antenna

Most use cases of reconfigurable antennas require an accurate forward model mapping configuration to radiated field (and reflections at feeds). Emerging dynamic metasurface antennas (DMAs) confront the conventional approach of extracting such a model from a numerical simulation with multiple challenges. First, the cost of accurately simulating an intricate and electrically large DMA architecture might be prohibitive. Second, the model-reality mismatch due to fabrication inaccuracies might be substantial, especially at higher frequencies and for DMA architectures leveraging strong inter-element mutual coupling (MC) to maximize their tunability. These considerations motivate an experimental parameter estimation for DMA forward models. The main challenge lies in the forward model's non-linearity due to inter-element MC. Multiport network theory (MNT) can accurately capture MC but the MC parameters cannot be measured directly. In this article, we demonstrate the experimental estimation of a high-accuracy proxy MNT model for a 19-GHz DMA with 7 feeds and 96 elements, where all feeds and elements are strongly coupled via a chaotic cavity. For a given DMA configuration and excitation, our proxy MNT model predicts the reflected field at the feeds and the radiated field with accuracies of 40.3 dB and 37.7 dB, respectively. A simpler, MC-unaware benchmark model only achieves 2.6 dB and 3.3 dB, respectively. We systematically examine the influence of the number of feeds and measured DMA configurations on the model accuracy, motivating the inclusion of "auxiliary calibration feeds" to facilitate the parameter estimation when the intended DMA operation is limited to a single feed. Finally, we measure DMA configurations optimized based on our proxy MNT model.

physics.app-ph↗

arXiv2025

End-to-End Dynamic Metasurface Antenna Wireless System: Prototype, Opportunities, and Challenges

Dynamic metasurface antennas (DMAs) are a promising hybrid analog/digital beamforming technology to realize next-generation wireless systems with low cost, footprint, and power consumption. The research on DMA-empowered wireless systems is still at an early stage, mostly limited to theoretical studies under simplifying assumptions on the one hand and a few antenna-level experiments on the other hand. Substantial knowledge gaps arise from the lack of complete end-to-end DMA-empowered wireless system prototypes. In addition, recently unveiled benefits of strong inter-element mutual coupling (MC) in DMAs remain untapped. Here, we demonstrate a K-band prototype of an end-to-end wireless system based on a DMA with strong inter-element MC. To showcase the flexible control over the DMA's radiation pattern, we present an experimental case study of simultaneously steering a beam to a desired transmitter and a null to an undesired jammer, achieving up to 43~dB discrimination. Using software-defined radios, we transmit and receive QPSK OFDM waveforms to evaluate the bit error rate. We also discuss algorithmic and technological challenges associated with envisioned future evolutions of our end-to-end testbed and real-life DMA-based wireless systems.

eess.SP↗

arXiv2025

Beyond-Diagonal RIS Prototype and Performance Evaluation

We present the first experimental prototype of a reflective beyond-diagonal reconfigurable intelligent surface (BD-RIS), i.e., a RIS with reconfigurable inter-element connections. Our BD-RIS consists of an antenna array whose ports are terminated by a tunable load network. The latter can terminate each antenna port with three distinct individual loads or connect it to an adjacent antenna port. Extensive performance evaluations in a rich-scattering environment validate that inter-element connections are beneficial. Moreover, we observe that our tunable load network's mentioned hardware constraints significantly influence, first, the achievable performance, second, the benefits of having inter-element connections, and, third, the importance of mutual-coupling awareness during optimization.

eess.SP↗

arXiv2025

Scalable Multiport Antenna Array Characterization with PCB-Realized Tunable Load Network Providing Additional "Virtual" VNA Ports

We prototype a PCB-realized tunable load network whose ports serve as additional "virtual" VNA ports in a "Virtual VNA" measurement setup. The latter enables the estimation of a many-port antenna array's scattering matrix with a few-port VNA, without any reconnections. We experimentally validate the approach for various eight-element antenna arrays in an anechoic chamber in the 700-900 MHz regime. We also improve the noise robustness of a step of the "Virtual VNA" post-processing algorithms by leveraging spectral correlations. Altogether, our PCB-realized VNA Extension Kit offers a scalable solution to characterize very large antenna arrays because of its low cost, small footprint, fully automated operation, and modular nature.

physics.app-ph↗

arXiv2025

Benefits of Mutual Coupling in Dynamic Metasurface Antennas

Dynamic metasurface antennas (DMAs) are a promising embodiment of next-generation reconfigurable antenna technology to realize base stations and access points with reduced cost and power consumption. A DMA is a thin structure patterned on its front with reconfigurable radiating metamaterial elements (meta-atoms) that are excited by waveguides or cavities. Mutual coupling between the meta-atoms can result in a strongly non-linear dependence of the DMA's radiation pattern on the configuration of its meta-atoms. However, besides the obvious algorithmic challenges of working with physics-compliant DMA models, it remains unclear how mutual coupling in DMAs influences the ability to achieve a desired wireless functionality. In this paper, we provide theoretical, numerical and experimental evidence that strong mutual coupling in DMAs increases the radiation pattern sensitivity to the DMA configuration and thereby boosts the available control over the radiation pattern, improving the ability to tailor the radiation pattern to the requirements of a desired wireless functionality. Counterintuitively, we hence encourage next-generation DMA implementations to enhance (rather than suppress) mutual coupling, in combination with suitable physics-compliant modeling and optimization. We expect the unveiled mechanism by which mutual coupling boosts the radiation pattern control to also apply to other reconfigurable antenna systems based on tunable lumped elements.

physics.app-ph↗

arXiv2023

Systematic Physics-Compliant Analysis of Over-the-Air Channel Equalization in RIS-Parametrized Wireless Networks-on-Chip

Wireless networks-on-chip (WNoCs) are an enticing complementary interconnect technology for multi-core chips but face severe resource constraints. Being limited to simple on-off-keying modulation, the reverberant nature of the chip enclosure imposes limits on allowed modulation speeds in sight of inter-symbol interference, casting doubts on the competitiveness of WNoCs as interconnect technology. Fortunately, this vexing problem was recently overcome by parametrizing the on-chip radio environment with a reconfigurable intelligent surface (RIS). By suitably configuring the RIS, selected channel impulse responses (CIRs) can be tuned to be (almost) pulse-like despite rich scattering thanks to judiciously tailored multi-bounce path interferences. However, the exploration of this "over-the-air" (OTA) equalization is thwarted by (i) the overwhelming complexity of the propagation environment, and (ii) the non-linear dependence of the CIR on the RIS configuration, requiring a costly and lengthy full-wave simulation for every optimization step. Here, we show that a reduced-basis physics-compliant model for RIS-parametrized WNoCs can be calibrated with a single full-wave simulation. Thereby, we unlock the possibility of predicting the CIR for any RIS configuration almost instantaneously without any additional full-wave simulation. We leverage this new tool to systematically explore OTA equalization in RIS-parametrized WNoCs regarding the optimal choice of delay time for the RIS-shaped CIR's peak. We also study the simultaneous optimization of multiple on-chip wireless links for broadcasting. Looking forward, the introduced tools will enable the efficient exploration of various types of OTA analog computing in RIS-parametrized WNoCs.

physics.app-ph↗