arXiv subjects

Jean-François Cliche

Publications and source records attributed to Jean-François Cliche.

12 recordsLinked to original sources

arXiv2026

Architecture and Validation of the CRS F-Engine for the CHORD Radio Telescope

We introduce the design of the t0.technology Control and Readout System (CRS) F-Engine that will be used for the Canadian Hydrogen Observatory and Radio transient Detector (CHORD), a new radio interferometer currently being commissioned at the Dominion Radio Astrophysical Observatory (DRAO) in Canada. The CRS F-Engine will directly digitize and channelize 1024 individual RF signals from the 512 dual-polarized dishes of the core array using an array of 128 CRS boards, a multi-purpose microwave readout platform using an AMD Zynq Ultrascale+ RF-System-on-Chip (RFSoC) architecture. The CRS supports the required analog and digital signal processing and is appropriately scalable, with rack-mountable crates each supporting up to 16 CRS boards, equipped with a backplane for distribution of power, common clock and time synchronization signals, and a full-mesh network for intra-crate data transmission. Implemented on the CRS boards is the chFPGA firmware which supports the digitization of 8 analog signals at 3.2 GSPS and channelizes them with a CASPER-based PFB/FFT into 8,192 frequency bins with ~195 kHz of resolution, which are then re-quantized into (4 + 4i) bits for data offload to an external X-Engine. chFPGA supports multiple post-channelization signal processing options through separate bitstream files for different applications, such as a 100 GbE packet assembler-transmitter for CHORD to feed channelized data to its external GPU-based X-Engine, as well as FPGA-based N^2 correlators, including a single-board (N = 8) correlator (the ``Pocket Correlator"), and a multi-board corner-turn engine coupled with a half-CRS crate (N = 64) correlator. We demonstrate the performance of chFPGA by injecting a wideband Gaussian noise source into a CRS board running the Pocket Correlator firmware, and find that recovered digitized timestream and channelized data are in excellent agreement with expectations.

astro-ph.IM↗

arXiv2026

Detection of the Cosmological 21 cm Signal in Auto-correlation at z ~ 1 with the Canadian Hydrogen Intensity Mapping Experiment

We present the first detection of the cosmological 21 cm intensity mapping signal in auto-correlation at z ~ 1 with the Canadian Hydrogen Intensity Mapping Experiment (CHIME). Using 94 nights of observation, we have measured the 21 cm auto-power spectrum over a frequency range from 608.2 MHz to 707.8 MHz (z = 1.34 to 1.01) at 0.4 h Mpc^-1 < k < 1.5 h Mpc^-1, with a detection significance of 12.5 sigma. Our analysis employs significant improvements to the CHIME data processing pipeline compared to previous work, including novel radio frequency interference (RFI) detection and masking algorithms, achromatic beamforming techniques, and foreground filtering before time averaging to minimize spectral leakage. We establish the robustness and reliability of our detection through a comprehensive suite of validation tests. We also measure the 21 cm signal in two independent sub-bands centered at z ~ 1.08 and z ~ 1.24 with detection significance of 8.7 sigma and 9.2 sigma, respectively. We briefly discuss the theoretical interpretation of these measurements in terms of a power spectrum model, deferring the details to a companion paper. This auto-power spectrum detection demonstrates CHIME's capability to probe large-scale structure through 21 cm intensity mapping without reliance on external galaxy surveys.

astro-ph.CO↗

arXiv2025

FRB 20250316A: A Brilliant and Nearby One-Off Fast Radio Burst Localized to 13 parsec Precision

Precise localizations of a small number of repeating fast radio bursts (FRBs) using very long baseline interferometry (VLBI) have enabled multiwavelength follow-up observations revealing diverse local environments. However, the 2--3\% of FRB sources that are observed to repeat may not be representative of the full population. Here we use the VLBI capabilities of the full CHIME Outriggers array for the first time to localize a nearby (40 Mpc), bright (kJy), and apparently one-off FRB source, FRB 20250316A, to its environment on 13-pc scales. We use optical and radio observations to place deep constraints on associated transient emission and the properties of its local environment. We place a $5σ$ upper limit of $L_{\mathrm{9.9~\mathrm{GHz}}} < 2.1\times10^{25}~\mathrm{erg~s^{-1}~Hz^{-1}}$ on spatially coincident radio emission, a factor of 100 lower than any known compact persistent radio source associated with an FRB. Our KCWI observations allow us to characterize the gas density, metallicity, nature of gas ionization, dust extinction and star-formation rate through emission line fluxes. We leverage the exceptional brightness and proximity of this source to place deep constraints on the repetition of FRB 20250316A, and find it is inconsistent with all well-studied repeaters given the non-detection of bursts at lower spectral energies. We explore the implications of a measured offset of 190$\pm20$ pc from the center of the nearest star-formation region, in the context of progenitor channels. FRB 20250316A marks the beginning of an era of routine localizations for one-off FRBs on tens of mas-scales, enabling large-scale studies of their local environments.

astro-ph.HE↗

arXiv2025

CHIME/FRB Outriggers: Design Overview

The Canadian Hydrogen Intensity Mapping Experiment (CHIME) has emerged as the world's premier facility for studying fast radio bursts (FRBs) through its fast transient search backend CHIME/FRB\@. The CHIME/FRB Outriggers project will augment this high detection rate of 2--3 FRBs per day with the ability to precisely localize them using very long baseline interferometry (VLBI). Using three strategically located stations in North America and deploying recently developed synoptic VLBI observing techniques, the Outriggers will provide $\sim 50$~milliarcsecond localization precision for the majority of detected FRBs. This paper presents an overview of the design and implementation of the Outriggers, covering their geographic distribution, structural design, and observational capabilities. We detail the scientific objectives driving the project, including the characterization of FRB populations, host galaxy demographics, and the use of FRBs as cosmological probes. We also discuss the calibration strategies available to mitigate ionospheric and instrumental effects, ensuring high-precision localization. With two stations currently in science operations, and the third in commissioning, the CHIME/FRB Outriggers project is poised to become a cornerstone of the FRB field, offering unprecedented insights into this enigmatic cosmic phenomenon.

astro-ph.HE↗

arXiv2024

CHIME/FRB Outriggers: KKO Station System and Commissioning Results

Localizing fast radio bursts (FRBs) to their host galaxies is an essential step to better understanding their origins and using them as cosmic probes. The CHIME/FRB Outrigger program aims to add VLBI-localization capabilities to CHIME, such that FRBs may be localized to tens of milliarcsecond precision at the time of their discovery, more than sufficient for host galaxy identification. The first-built outrigger telescope is KKO, located 66 kilometers west of CHIME. Cross-correlating KKO with CHIME can achieve arcsecond-scale localization in right ascension while avoiding the worst effects of the ionosphere. This paper presents measurements of KKO's performance throughout its commissioning phase, as well as a summary of its design and function. We demonstrate KKO's capabilities as a standalone instrument by producing full-sky images, mapping the angular and frequency structure of the primary beam, and measuring feed positions. To demonstrate the localization capabilities of the CHIME -- KKO baseline, we collected five separate observations each for a set of twenty bright pulsars, and aimed to measure their positions to within 5~arcseconds. All of these pulses were successfully localized to within this specification. The next two outriggers are expected to be commissioned in 2024, and will enable subarcsecond localizations for approximately hundreds of FRBs each year.

astro-ph.IM↗

arXiv2022

Sub-second periodicity in a fast radio burst

Fast radio bursts (FRBs) are millisecond-duration flashes of radio waves that are visible at distances of billions of light-years. The nature of their progenitors and their emission mechanism remain open astrophysical questions. Here we report the detection of the multi-component FRB 20191221A and the identification of a periodic separation of 216.8(1) ms between its components with a significance of 6.5 sigmas. The long (~3 s) duration and nine or more components forming the pulse profile make this source an outlier in the FRB population. Such short periodicity provides strong evidence for a neutron-star origin of the event. Moreover, our detection favours emission arising from the neutron-star magnetosphere, as opposed to emission regions located further away from the star, as predicted by some models.

astro-ph.HE↗

arXiv2022

An Overview of CHIME, the Canadian Hydrogen Intensity Mapping Experiment

The Canadian Hydrogen Intensity Mapping Experiment (CHIME) is a drift scan radio telescope operating across the 400-800 MHz band. CHIME is located at the Dominion Radio Astrophysical Observatory near Penticton, BC Canada. The instrument is designed to map neutral hydrogen over the redshift range 0.8 to 2.5 to constrain the expansion history of the Universe. This goal drives the design features of the instrument. CHIME consists of four parallel cylindrical reflectors, oriented north-south, each 100 m $\times$ 20 m and outfitted with a 256 element dual-polarization linear feed array. CHIME observes a two degree wide stripe covering the entire meridian at any given moment, observing 3/4 of the sky every day due to Earth rotation. An FX correlator utilizes FPGAs and GPUs to digitize and correlate the signals, with different correlation products generated for cosmological, fast radio burst, pulsar, VLBI, and 21 cm absorber backends. For the cosmology backend, the $N_\mathrm{feed}^2$ correlation matrix is formed for 1024 frequency channels across the band every 31 ms. A data receiver system applies calibration and flagging and, for our primary cosmological data product, stacks redundant baselines and integrates for 10 s. We present an overview of the instrument, its performance metrics based on the first three years of science data, and we describe the current progress in characterizing CHIME's primary beam response. We also present maps of the sky derived from CHIME data; we are using versions of these maps for a cosmological stacking analysis as well as for investigation of Galactic foregrounds.

astro-ph.IM↗

arXiv2022

Using the Sun to Measure the Primary Beam Response of the Canadian Hydrogen Intensity Mapping Experiment

We present a beam pattern measurement of the Canadian Hydrogen Intensity Mapping Experiment (CHIME) made using the Sun as a calibration source. As CHIME is a pure drift scan instrument, we rely on the seasonal North-South motion of the Sun to probe the beam at different elevations. This semiannual range in elevation, combined with the radio brightness of the Sun, enables a beam measurement which spans ~7,200 square degrees on the sky without the need to move the telescope. We take advantage of observations made near solar minimum to minimize the impact of solar variability, which is observed to be <10% in intensity over the observation period. The resulting data set is highly complementary to other CHIME beam measurements -- both in terms of angular coverage and systematics -- and plays an important role in the ongoing program to characterize the CHIME primary beam.

astro-ph.IM↗

arXiv2017

Limits on the ultra-bright Fast Radio Burst population from the CHIME Pathfinder

We present results from a new incoherent-beam Fast Radio Burst (FRB) search on the Canadian Hydrogen Intensity Mapping Experiment (CHIME) Pathfinder. Its large instantaneous field of view (FoV) and relative thermal insensitivity allow us to probe the ultra-bright tail of the FRB distribution, and to test a recent claim that this distribution's slope, $α\equiv-\frac{\partial \log N}{\partial \log S}$, is quite small. A 256-input incoherent beamformer was deployed on the CHIME Pathfinder for this purpose. If the FRB distribution were described by a single power-law with $α=0.7$, we would expect an FRB detection every few days, making this the fastest survey on sky at present. We collected 1268 hours of data, amounting to one of the largest exposures of any FRB survey, with over 2.4\,$\times$\,10$^5$\,deg$^2$\,hrs. Having seen no bursts, we have constrained the rate of extremely bright events to $<\!13$\,sky$^{-1}$\,day$^{-1}$ above $\sim$\,220$\sqrt{(τ/\rm ms)}$ Jy\,ms for $τ$ between 1.3 and 100\,ms, at 400--800\,MHz. The non-detection also allows us to rule out $α\lesssim0.9$ with 95$\%$ confidence, after marginalizing over uncertainties in the GBT rate at 700--900\,MHz, though we show that for a cosmological population and a large dynamic range in flux density, $α$ is brightness-dependent. Since FRBs now extend to large enough distances that non-Euclidean effects are significant, there is still expected to be a dearth of faint events and relative excess of bright events. Nevertheless we have constrained the allowed number of ultra-intense FRBs. While this does not have significant implications for deeper, large-FoV surveys like full CHIME and APERTIF, it does have important consequences for other wide-field, small dish experiments.

astro-ph.HE↗

arXiv2015

A GPU-based Correlator X-engine Implemented on the CHIME Pathfinder

We present the design and implementation of a custom GPU-based compute cluster that provides the correlation X-engine of the CHIME Pathfinder radio telescope. It is among the largest such systems in operation, correlating 32,896 baselines (256 inputs) over 400MHz of radio bandwidth. Making heavy use of consumer-grade parts and a custom software stack, the system was developed at a small fraction of the cost of comparable installations. Unlike existing GPU backends, this system is built around OpenCL kernels running on consumer-level AMD GPUs, taking advantage of low-cost hardware and leveraging packed integer operations to double algorithmic efficiency. The system achieves the required 105TOPS in a 10kW power envelope, making it among the most power-efficient X-engines in use today.

astro-ph.IM↗

arXiv2014

Digital frequency domain multiplexing readout electronics for the next generation of millimeter telescopes

Frequency domain multiplexing (fMux) is an established technique for the readout of transition-edge sensor (TES) bolometers in millimeter-wavelength astrophysical instrumentation. In fMux, the signals from multiple detectors are read out on a single pair of wires reducing the total cryogenic thermal loading as well as the cold component complexity and cost of a system. The current digital fMux system, in use by POLARBEAR, EBEX, and the South Pole Telescope, is limited to a multiplexing factor of 16 by the dynamic range of the Superconducting Quantum Interference Device pre-amplifier and the total system bandwidth. Increased multiplexing is key for the next generation of large format TES cameras, such as SPT-3G and POLARBEAR2, which plan to have on the of order 15,000 detectors. Here, we present the next generation fMux readout, focusing on the warm electronics. In this system, the multiplexing factor increases to 64 channels per module (2 wires) while maintaining low noise levels and detector stability. This is achieved by increasing the system bandwidth, reducing the dynamic range requirements though active feedback, and digital synthesis of voltage biases with a novel polyphase filter algorithm. In addition, a version of the new fMux readout includes features such as low power consumption and radiation-hard components making it viable for future space-based millimeter telescopes such as the LiteBIRD satellite.

astro-ph.IM↗

arXiv2014

Calibrating CHIME, A New Radio Interferometer to Probe Dark Energy

The Canadian Hydrogen Intensity Mapping Experiment (CHIME) is a transit interferometer currently being built at the Dominion Radio Astrophysical Observatory (DRAO) in Penticton, BC, Canada. We will use CHIME to map neutral hydrogen in the frequency range 400 -- 800\,MHz over half of the sky, producing a measurement of baryon acoustic oscillations (BAO) at redshifts between 0.8 -- 2.5 to probe dark energy. We have deployed a pathfinder version of CHIME that will yield constraints on the BAO power spectrum and provide a test-bed for our calibration scheme. I will discuss the CHIME calibration requirements and describe instrumentation we are developing to meet these requirements.

astro-ph.IM↗