arXiv subjects

Jean-Philippe Soulié

Publications and source records attributed to Jean-Philippe Soulié.

5 recordsLinked to original sources

arXiv2025

Exploring binary intermetallics for advanced interconnect applications using ab initio simulations

The challenge of increasing copper (Cu) resistivity with diminishing Cu interconnect dimensions in complementary metal-oxide-semiconductor (CMOS) transistors, along with the imperative for efficient electron transport paths to fulfill scaling requirements in interconnects is significant. First-principles electronic structures calculations based on density functional theory have been performed to evaluate the potential scalability of some Cu, Al, Ru and Mo based binary alloys to replace Cu. We evaluate the expected sensitivity of the resistivity of these binary alloys to reduced line dimensions with a figure of merit that is based on generalized finite-temperature transport tensors. These transport tensors allow for a straightforward comparison between highly anisotropic intermetallics with given transport directions and Cu, and are evaluated together with their resistance to electromigration. Based on the figure-of-merit analysis, we identify several aluminides that show potential to outperform Cu at reduced interconnect dimensions in terms of their electronic transport and reliability properties.

cond-mat.mtrl-sci↗

arXiv2024

Selecting Alternative Metals for Advanced Interconnects

Interconnect resistance and reliability have emerged as critical factors limiting the performance of advanced CMOS circuits. With the slowdown of transistor scaling, interconnect scaling has become the primary driver of continued circuit miniaturization. The associated scaling challenges for interconnects are expected to further intensify in future CMOS technology nodes. As interconnect dimensions approach the 10 nm scale, the limitations of conventional Cu dual-damascene metallization are becoming increasingly difficult to overcome, spurring over a decade of focused research into alternative metallization schemes. The selection of alternative metals is a highly complex process, requiring consideration of multiple criteria, including resistivity at reduced dimensions, reliability, thermal performance, process technology readiness, and sustainability. This tutorial introduces the fundamental criteria for benchmarking and selecting alternative metals and reviews the current state of the art in this field. It covers materials nearing adoption in high-volume manufacturing, materials currently under active research, and potential future directions for fundamental study. While early alternatives to Cu metallization have recently been introduced in commercial CMOS devices, the search for the optimal interconnect metal remains ongoing.

physics.app-ph↗

arXiv2024

Cu$_x$Al$_{1-x}$ films as Alternatives to Copper for Advanced Interconnect Metallization

Cu$_x$Al$_{1-x}$ thin films with $0.2 \le x \le 0.7$ have been studied as potential alternatives for the metallization of advanced interconnects. First-principles simulations were used to obtain the Cu$_x$Al$_{1-x}$ electronic structure and cohesive energy to benchmark different intermetallics and their prospects for interconnect metallization. Next, thin Cu$_x$Al$_{1-x}$ films were deposited by PVD with thicknesses in the range between 3 and 28 nm. The lowest resistivities of 9.5 $μΩ$cm were obtained for 28 nm thick stochiometric CuAl and CuAl$_2$ after 400$^\circ$C post-deposition annealing. Based on the experimental results, we discuss the main challenges for the studied aluminides from an interconnect point of view, namely the control of the film stoichiometry, the phase separation observed for off-stoichiometric CuAl and CuAl$_2$, as well as the presence of a nonstoichiometric surface oxide.

cond-mat.mtrl-sci↗

arXiv2024

Al$_3$Sc thin films for advanced interconnect applications

Al$_x$Sc$_{1-x}$ thin films have been studied with compositions around Al$_3$Sc ($x$ = 0.75) for potential interconnect metallization applications. As-deposited 25 nm thick films were x-ray amorphous but crystallized at 190°C, followed by recrystallization at 440°C. After annealing at 500°C, 24 nm thick stoichiometric Al$_3$Sc showed a resistivity of 12.6 $μΩ$cm, limited by a combination of grain boundary and point defect (disorder) scattering. Together with ab initio calculations that found a mean free path of the charge carriers of 7 nm for stoichiometric Al$_3$Sc, these results indicate that Al$_3$Sc bears promise for future interconnect metallization schemes. Challenges remain in minimizing the formation of secondary phases as well as in the control of the non-stoichiometric surface oxidation and interfacial reactions with underlying dielectrics.

cond-mat.mtrl-sci↗

arXiv2023

Properties of Nb\_xTi\_{(1-x)}N thin films deposited on 300 mm silicon wafers for upscaling superconducting digital circuits

Scaling superconducting digital circuits requires fundamental changes in the current material set and fabrication process. The transition to 300 mm wafers and the implementation of advanced lithography are instrumental in facilitating mature CMOS processes, ensuring uniformity, and optimizing the yield. This study explores the properties of NbxTi(1-x)N films fabricated by magnetron DC sputtering on 300 mm Si wafers. As a promising alternative to traditional Nb in device manufacturing, NbxTi(1-x)N offers numerous advantages, including enhanced stability and scalability to smaller dimensions, in both processing and design. As a ternary material, NbxTi(1-x)N allows engineering material parameters by changing deposition conditions. The engineered properties can be used to modulate device parameters through the stack and mitigate failure modes. We report characterization of NbxTi(1-x)N films at less than 2% thickness variability, 2.4% Tc variability and 3% composition variability. The films material properties such as resistivity (140-375 Ωcm) and critical temperature Tc (4.6 K - 14.1 K) are correlated with stoichiometry and morphology of the films. Our results highlight the significant influence of deposition conditions on crystallographic texture along the films and its correlation with Tc.

cond-mat.supr-con↗