arXiv subjects

Jeeseop Kim

Publications and source records attributed to Jeeseop Kim.

At least 19 recordsLinked to original sources

arXiv2026

Multi-Rate Nonlinear Model Predictive Control for Wall-Supported Bipedal Locomotion of Quadrupedal Robots

This paper presents a novel layered planning and control framework based on multi-rate nonlinear model predictive control (MR-NMPC) that enables quadrupedal robots to perform hybrid bipedal locomotion with wall-assisted support in constrained environments. Real-time trajectory optimization for this locomotion presents significant challenges, as the controller must simultaneously plan for both the contact points and the continuous trajectories of the robot's center of mass (CoM) and orientation within the robot's nonlinear dynamics while accounting for unilateral contact constraints, underactuation, and the switching nature of the robot's dynamics. At the high level of the control framework, an MR-NMPC is proposed, which dynamically plans both the discrete-time trajectories of the contact points and the continuous-time trajectories of the CoM and orientation, using a single rigid body (SRB) dynamics model. By incorporating contact-point planning within the multi-rate optimal control framework, this approach enhances dynamic stability compared to heuristic foot placement strategies. At the low level of the control framework, a nonlinear whole-body controller (WBC) based on virtual constraints and a quadratic program enforces full-order dynamics and tracks the MR-NMPC references. The proposed approach is validated through extensive numerical simulations demonstrating the robust wall-assisted bipedal locomotion of a Unitree A1 quadrupedal robot on rough terrains and under external disturbances in a constrained environment. Comparative analysis shows that the proposed MR-NMPC achieves a 2.9 times higher success rate compared to conventional MPC with heuristic-based foot placement strategies in negotiating irregular terrain at high speeds.

cs.RO↗

arXiv2026

Safety-Critical Centralized Nonlinear MPC for Cooperative Payload Transportation by Two Quadrupedal Robots

This paper presents a safety-critical centralized nonlinear model predictive control (NMPC) framework for cooperative payload transportation by two quadrupedal robots. The interconnected robot-payload system is modeled as a discrete-time nonlinear differential-algebraic system, capturing the coupled dynamics through holonomic constraints and interaction wrenches. To ensure safety in complex environments, we develop a control barrier function (CBF)-based NMPC formulation that enforces collision avoidance constraints for both the robots and the payload. The proposed approach retains the interaction wrenches as decision variables, resulting in a structured DAE-constrained optimal control problem that enables efficient real-time implementation. The effectiveness of the algorithm is validated through extensive hardware experiments on two Unitree Go2 platforms performing cooperative payload transportation in cluttered environments under mass and inertia uncertainty and external push disturbances.

cs.RO↗

arXiv2026

ADMM-Based Distributed MPC with Control Barrier Functions for Safe Multi-Robot Quadrupedal Locomotion

This paper proposes a fully decentralized model predictive control (MPC) framework with control barrier function (CBF) constraints for safety-critical trajectory planning in multi-robot legged systems. The incorporation of CBF constraints introduces explicit inter-agent coupling, which prevents direct decomposition of the resulting optimal control problems. To address this challenge, we reformulate the centralized safety-critical MPC problem using a structured distributed optimization framework based on the alternating direction method of multipliers (ADMM). By introducing a novel node-edge splitting formulation with consensus constraints, the proposed approach decomposes the global problem into independent node-local and edge-local quadratic programs that can be solved in parallel using only neighbor-to-neighbor communication. This enables fully decentralized trajectory optimization with symmetric computational load across agents while preserving safety and dynamic feasibility. The proposed framework is integrated into a hierarchical locomotion control architecture for quadrupedal robots, combining high-level distributed trajectory planning, mid-level nonlinear MPC enforcing single rigid body dynamics, and low-level whole-body control enforcing full-order robot dynamics. The effectiveness of the proposed approach is demonstrated through hardware experiments on two Unitree Go2 quadrupedal robots and numerical simulations involving up to four robots navigating uncertain environments with rough terrain and external disturbances. The results show that the proposed distributed formulation achieves performance comparable to centralized MPC while reducing the average per-cycle planning time by up to 51% in the four-agent case, enabling efficient real-time decentralized implementation.

cs.RO↗

arXiv2025

Robust Adaptive Safe Robotic Grasping with Tactile Sensing

Robotic grasping requires safe force interaction to prevent a grasped object from being damaged or slipping out of the hand. In this vein, this paper proposes an integrated framework for grasping with formal safety guarantees based on Control Barrier Functions. We first design contact force and force closure constraints, which are enforced by a safety filter to accomplish safe grasping with finger force control. For sensory feedback, we develop a technique to estimate contact point, force, and torque from tactile sensors at each finger. We verify the framework with various safety filters in a numerical simulation under a two-finger grasping scenario. We then experimentally validate the framework by grasping multiple objects, including fragile lab glassware, in a real robotic setup, showing that safe grasping can be successfully achieved in the real world. We evaluate the performance of each safety filter in the context of safety violation and conservatism, and find that disturbance observer-based control barrier functions provide superior performance for safety guarantees with minimum conservatism.

cs.RO↗

arXiv2025

Minimizing Conservatism in Safety-Critical Control for Input-Delayed Systems via Adaptive Delay Estimation

Input delays affect systems such as teleoperation and wirelessly autonomous connected vehicles, and may lead to safety violations. One promising way to ensure safety in the presence of delay is to employ control barrier functions (CBFs), and extensions thereof that account for uncertainty: delay adaptive CBFs (DaCBFs). This paper proposes an online adaptive safety control framework for reducing the conservatism of DaCBFs. The main idea is to reduce the maximum delay estimation error bound so that the state prediction error bound is monotonically non-increasing. To this end, we first leverage the estimation error bound of a disturbance observer to bound the state prediction error. Second, we design two nonlinear programs to update the maximum delay estimation error bound satisfying the prediction error bound, and subsequently update the maximum state prediction error bound used in DaCBFs. The proposed method ensures the maximum state prediction error bound is monotonically non-increasing, yielding less conservatism in DaCBFs. We verify the proposed method in an automated connected truck application, showing that the proposed method reduces the conservatism of DaCBFs.

eess.SY↗

arXiv2025

Hybrid Data-Driven Predictive Control for Robust and Reactive Exoskeleton Locomotion Synthesis

Robust bipedal locomotion in exoskeletons requires the ability to dynamically react to changes in the environment in real time. This paper introduces the hybrid data-driven predictive control (HDDPC) framework, an extension of the data-enabled predictive control, that addresses these challenges by simultaneously planning foot contact schedules and continuous domain trajectories. The proposed framework utilizes a Hankel matrix-based representation to model system dynamics, incorporating step-to-step (S2S) transitions to enhance adaptability in dynamic environments. By integrating contact scheduling with trajectory planning, the framework offers an efficient, unified solution for locomotion motion synthesis that enables robust and reactive walking through online replanning. We validate the approach on the Atalante exoskeleton, demonstrating improved robustness and adaptability.

cs.RO↗

arXiv2025

A Nonlinear MPC Framework for Loco-Manipulation of Quadrupedal Robots with Non-Negligible Manipulator Dynamics

Model predictive control (MPC) combined with reduced-order template models has emerged as a powerful tool for trajectory optimization in dynamic legged locomotion. However, loco-manipulation tasks performed by legged robots introduce additional complexity, necessitating computationally efficient MPC algorithms capable of handling high-degree-of-freedom (DoF) models. This letter presents a computationally efficient nonlinear MPC (NMPC) framework tailored for loco-manipulation tasks of quadrupedal robots equipped with robotic manipulators whose dynamics are non-negligible relative to those of the quadruped. The proposed framework adopts a decomposition strategy that couples locomotion template models -- such as the single rigid body (SRB) model -- with a full-order dynamic model of the robotic manipulator for torque-level control. This decomposition enables efficient real-time solution of the NMPC problem in a receding horizon fashion at 60 Hz. The optimal state and input trajectories generated by the NMPC for locomotion are tracked by a low-level nonlinear whole-body controller (WBC) running at 500 Hz, while the optimal torque commands for the manipulator are directly applied. The layered control architecture is validated through extensive numerical simulations and hardware experiments on a 15-kg Unitree Go2 quadrupedal robot augmented with a 4.4-kg 4-DoF Kinova arm. Given that the Kinova arm dynamics are non-negligible relative to the Go2 base, the proposed NMPC framework demonstrates robust stability in performing diverse loco-manipulation tasks, effectively handling external disturbances, payload variations, and uneven terrain.

cs.RO↗

arXiv2025

Safety-Critical and Distributed Nonlinear Predictive Controllers for Teams of Quadrupedal Robots

This paper presents a novel hierarchical, safety-critical control framework that integrates distributed nonlinear model predictive controllers (DNMPCs) with control barrier functions (CBFs) to enable cooperative locomotion of multi-agent quadrupedal robots in complex environments. While NMPC-based methods are widely adopted for enforcing safety constraints and navigating multi-robot systems (MRSs) through intricate environments, ensuring the safety of MRSs requires a formal definition grounded in the concept of invariant sets. CBFs, typically implemented via quadratic programs (QPs) at the planning layer, provide formal safety guarantees. However, their zero-control horizon limits their effectiveness for extended trajectory planning in inherently unstable, underactuated, and nonlinear legged robot models. Furthermore, the integration of CBFs into real-time NMPC for sophisticated MRSs, such as quadrupedal robot teams, remains underexplored. This paper develops computationally efficient, distributed NMPC algorithms that incorporate CBF-based collision safety guarantees within a consensus protocol, enabling longer planning horizons for safe cooperative locomotion under disturbances and rough terrain conditions. The optimal trajectories generated by the DNMPCs are tracked using full-order, nonlinear whole-body controllers at the low level. The proposed approach is validated through extensive numerical simulations with up to four Unitree A1 robots and hardware experiments involving two A1 robots subjected to external pushes, rough terrain, and uncertain obstacle information. Comparative analysis demonstrates that the proposed CBF-based DNMPCs achieve a 27.89% higher success rate than conventional NMPCs without CBF constraints.

cs.RO↗

arXiv2024

Data-Driven Predictive Control for Robust Exoskeleton Locomotion

Exoskeleton locomotion must be robust while being adaptive to different users with and without payloads. To address these challenges, this work introduces a data-driven predictive control (DDPC) framework to synthesize walking gaits for lower-body exoskeletons, employing Hankel matrices and a state transition matrix for its data-driven model. The proposed approach leverages DDPC through a multi-layer architecture. At the top layer, DDPC serves as a planner employing Hankel matrices and a state transition matrix to generate a data-driven model that can learn and adapt to varying users and payloads. At the lower layer, our method incorporates inverse kinematics and passivity-based control to map the planned trajectory from DDPC into the full-order states of the lower-body exoskeleton. We validate the effectiveness of this approach through numerical simulations and hardware experiments conducted on the Atalante lower-body exoskeleton with different payloads. Moreover, we conducted a comparative analysis against the model predictive control (MPC) framework based on the reduced-order linear inverted pendulum (LIP) model. Through this comparison, the paper demonstrates that DDPC enables robust bipedal walking at various velocities while accounting for model uncertainties and unknown perturbations.

cs.RO↗

arXiv2024

Safety-critical Locomotion of Biped Robots in Infeasible Paths: Overcoming Obstacles during Navigation toward Destination

This paper proposes a safety-critical locomotion control framework employed for legged robots exploring through infeasible path in obstacle-rich environments. Our research focus is on achieving safe and robust locomotion where robots confront unavoidable obstacles en route to their designated destination. Through the utilization of outcomes from physical interactions with unknown objects, we establish a hierarchy among the safety-critical conditions avoiding the obstacles. This hierarchy enables the generation of a safe reference trajectory that adeptly mitigates conflicts among safety conditions and reduce the risk while controlling the robot toward its destination without additional motion planning methods. In addition, robust bipedal locomotion is achieved by utilizing the Hybrid Linear Inverted Pendulum model, coupled with a disturbance observer addressing a disturbance from the physical interaction.

cs.RO↗

arXiv2024

Dynamic Walking on Highly Underactuated Point Foot Humanoids: Closing the Loop between HZD and HLIP

Realizing bipedal locomotion on humanoid robots with point feet is especially challenging due to their highly underactuated nature, high degrees of freedom, and hybrid dynamics resulting from impacts. With the goal of addressing this challenging problem, this paper develops a control framework for realizing dynamic locomotion and implements it on a novel point foot humanoid: ADAM. To this end, we close the loop between Hybrid Zero Dynamics (HZD) and Hybrid linear inverted pendulum (HLIP) based step length regulation. To leverage the full-order hybrid dynamics of the robot, walking gaits are first generated offline by utilizing HZD. These trajectories are stabilized online through the use of a HLIP based regulator. Finally, the planned trajectories are mapped into the full-order system using a task space controller incorporating inverse kinematics. The proposed method is verified through numerical simulations and hardware experiments on the humanoid robot ADAM marking the first humanoid point foot walking. Moreover, we experimentally demonstrate the robustness of the realized walking via the ability to track a desired reference speed, robustness to pushes, and locomotion on uneven terrain.

cs.RO↗

arXiv2024

Safety-critical Autonomous Inspection of Distillation Columns using Quadrupedal Robots Equipped with Roller Arms

This paper proposes a comprehensive framework designed for the autonomous inspection of complex environments, with a specific focus on multi-tiered settings such as distillation column trays. Leveraging quadruped robots equipped with roller arms, and through the use of onboard perception, we integrate essential motion components including: locomotion, safe and dynamic transitions between trays, and intermediate motions that bridge a variety of motion primitives. Given the slippery and confined nature of column trays, it is critical to ensure safety of the robot during inspection, therefore we employ a safety filter and footstep re-planning based upon control barrier function representations of the environment. Our framework integrates all system components into a state machine encoding the developed safety-critical planning and control elements to guarantee safety-critical autonomy, enabling autonomous and safe navigation and inspection of distillation columns. Experimental validation in an environment, consisting of industrial-grade chemical distillation trays, highlights the effectiveness of our multi-layered architecture.

cs.RO↗

arXiv2023

Safety-Critical Coordination for Cooperative Legged Locomotion via Control Barrier Functions

This paper presents a safety-critical approach to the coordinated control of cooperative robots locomoting in the presence of fixed (holonomic) constraints. To this end, we leverage control barrier functions (CBFs) to ensure the safe cooperation of the robots while maintaining a desired formation and avoiding obstacles. The top-level planner generates a set of feasible trajectories, accounting for both kinematic constraints between the robots and physical constraints of the environment. This planner leverages CBFs to ensure safety-critical coordination control, i.e., guarantee safety of the collaborative robots during locomotion. The middle-level trajectory planner incorporates interconnected single rigid body (SRB) dynamics to generate optimal ground reaction forces (GRFs) to track the safety-ensured trajectories from the top-level planner while addressing the interconnection dynamics between agents. Distributed low-level controllers generate whole-body motion to follow the prescribed optimal GRFs while ensuring the friction cone condition at each end of the stance legs. The effectiveness of the approach is demonstrated through numerical simulations and experimentally on a pair of quadrupedal robots.

cs.RO↗

arXiv2023

Safety-Critical Coordination of Legged Robots via Layered Controllers and Forward Reachable Set based Control Barrier Functions

This paper presents a safety-critical approach to the coordination of robots in dynamic environments. To this end, we leverage control barrier functions (CBFs) with the forward reachable set to guarantee the safe coordination of the robots while preserving a desired trajectory via a layered controller. The top-level planner generates a safety-ensured trajectory for each agent, accounting for the dynamic constraints in the environment. This planner leverages high-order CBFs based on the forward reachable set to ensure safety-critical coordination control, i.e., guarantee the safe coordination of the robots during locomotion. The middle-level trajectory planner employs single rigid body (SRB) dynamics to generate optimal ground reaction forces (GRFs) to track the safety-ensured trajectories from the top-level planner. The whole-body motions to adhere to the optimal GRFs while ensuring the friction cone condition at the end of each stance leg are generated from the low-level controller. The effectiveness of the approach is demonstrated through simulation and hardware experiments.

cs.RO↗

arXiv2023

Safety-critical Control of Quadrupedal Robots with Rolling Arms for Autonomous Inspection of Complex Environments

This paper presents a safety-critical control framework tailored for quadruped robots equipped with a roller arm, particularly when performing locomotive tasks such as autonomous robotic inspection in complex, multi-tiered environments. In this study, we consider the problem of operating a quadrupedal robot in distillation columns, locomoting on column trays and transitioning between these trays with a roller arm. To address this problem, our framework encompasses the following key elements: 1) Trajectory generation for seamless transitions between columns, 2) Foothold re-planning in regions deemed unsafe, 3) Safety-critical control incorporating control barrier functions, 4) Gait transitions based on safety levels, and 5) A low-level controller. Our comprehensive framework, comprising these components, enables autonomous and safe locomotion across multiple layers. We incorporate reduced-order and full-body models to ensure safety, integrating safety-critical control and footstep re-planning approaches. We validate the effectiveness of our proposed framework through practical experiments involving a quadruped robot equipped with a roller arm, successfully navigating and transitioning between different levels within the column tray structure.

cs.RO↗

arXiv2023

A Data-driven Method for Safety-critical Control: Designing Control Barrier Functions from State Constraints

This paper addresses the challenge of integrating explicit hard constraints into the control barrier function (CBF) framework for ensuring safety in autonomous systems, including robots. We propose a novel data-driven method to derive CBFs from these hard constraints in practical scenarios. Our approach assumes that the forward invariant safe set is either a subset or equal to the constrained set. The process consists of two main steps. First, we randomly sample states within the constraint boundaries and identify inputs meeting the time derivative criteria of the hard constraint; this iterative process converges using the Jaccard index. Next, we formulate CBFs that enclose the safe set using the sampled boundaries. This enables the creation of a control-invariant safe set, approaching the maximum attainable level of control invariance. This approach, therefore, addresses the complexities posed by complex autonomous systems with constrained control input spaces, culminating in a control-invariant safe set that closely approximates the maximal control invariant set.

cs.RO↗

arXiv2023

Humanoid Robot Co-Design: Coupling Hardware Design with Gait Generation via Hybrid Zero Dynamics

Selecting robot design parameters can be challenging since these parameters are often coupled with the performance of the controller and, therefore, the resulting capabilities of the robot. This leads to a time-consuming and often expensive process whereby one iterates between designing the robot and manually evaluating its capabilities. This is particularly challenging for bipedal robots, where it can be difficult to evaluate the behavior of the system due to the underlying nonlinear and hybrid dynamics. Thus, in an effort to streamline the design process of bipedal robots, and maximize their performance, this paper presents a systematic framework for the co-design of humanoid robots and their associated walking gaits. To this end, we leverage the framework of hybrid zero dynamic (HZD) gait generation, which gives a formal approach to the generation of dynamic walking gaits. The key novelty of this paper is to consider both virtual constraints associated with the actuators of the robot, coupled with design virtual constraints that encode the associated parameters of the robot to be designed. These virtual constraints are combined in an HZD optimization problem which simultaneously determines the design parameters while finding a stable walking gait that minimizes a given cost function. The proposed approach is demonstrated through the design of a novel humanoid robot, ADAM, wherein its thigh and shin are co-designed so as to yield energy efficient bipedal locomotion.

cs.RO↗

arXiv2023

Hierarchical Relaxation of Safety-critical Controllers: Mitigating Contradictory Safety Conditions with Application to Quadruped Robots

The safety-critical control of robotic systems often must account for multiple, potentially conflicting, safety constraints. This paper proposes novel relaxation techniques to address safety-critical control problems in the presence of conflicting safety conditions. In particular, Control Barrier Function (CBFs) provide a means to encode safety as constraints in a Quadratic Program (QP), wherein multiple safety conditions yield multiple constraints. However, the QP problem becomes infeasible when the safety conditions cannot be simultaneously satisfied. To resolve this potential infeasibility, we introduce a hierarchy between the safety conditions and employ an additional variable to relax the less important safety conditions (Relaxed-CBF-QP), and formulate a cascaded structure to achieve smaller violations of lower-priority safety conditions (Hierarchical-CBF-QP). The proposed approach, therefore, ensures the existence of at least one solution to the QP problem with the CBFs while dynamically balancing enforcement of additional safety constraints. Importantly, this paper evaluates the impact of different weighting factors in the Hierarchical-CBF-QP and, due to the sensitivity of these weightings in the observed behavior, proposes a method to determine the weighting factors via a sampling-based technique. The validity of the proposed approach is demonstrated through simulations and experiments on a quadrupedal robot navigating to a goal through regions with different levels of danger.

cs.RO↗