Searcharxiv⌕ Search

arXiv subjects

Jeevak M. Parpia

Publications and source records attributed to Jeevak M. Parpia.

11 recordsLinked to original sources

Chiral superfluid helium-3 in the quasi-two-dimensional limit

Anisotropic pair breaking close to surfaces favors the chiral A phase of the superfluid $^3$He over the time-reversal invariant B phase. Confining the superfluid $^3$He into a cavity of height $D$ of the order of the Cooper pair size characterized by the coherence length $ξ_0$ - ranging between 16 nm (34 bar) and 77 nm (0 bar) - extends the surface effects over the whole sample volume, thus allowing stabilization of the A phase at pressures $P$ and temperatures $T$ where otherwise the B phase would be stable. In this Letter, the surfaces of such a confined sample are covered with a superfluid $^4$He film to create specular quasiparticle scattering boundary conditions, preventing the suppression of the superfluid order parameter. We show that the chiral A phase is the stable superfluid phase under strong confinement over the full $P$-$T$ phase diagram down to a quasi-two-dimensional limit $D / ξ_0 = 1$ , where $D = 80$ nm. The planar phase, which is degenerate with the chiral A phase in the weak-coupling limit, is not observed. The gap inferred from measurements over the wide pressure range from 0.2 to 21.0 bar leads to an empirical ansatz for temperature-dependent strong-coupling effects. We discuss how these results pave the way for the realization of the fully gapped two-dimensional $p_x + ip_y$ superfluid under more extreme confinement.

cond-mat.supr-con↗

Nanofluidic platform for studying the first-order phase transitions in superfluid helium-3

The symmetry-breaking first-order phase transition between superfluid phases $^3$He-A and $^3$He-B can be triggered extrinsically by ionising radiation or heterogeneous nucleation arising from the details of the sample cell construction. However, the role of potential homogeneous intrinsic nucleation mechanisms remains elusive. Discovering and resolving the intrinsic processes may have cosmological consequences, since an analogous first-order phase transition, and the production of gravitational waves, has been predicted for the very early stages of the expanding Universe in many extensions of the Standard Model of particle physics. Here we introduce a new approach for probing the phase transition in superfluid $^3$He. The setup consists of a novel stepped-height nanofluidic sample container with close to atomically smooth walls. The $^3$He is confined in five tiny nanofabricated volumes and assayed non-invasively by NMR. Tuning of the state of $^3$He by confinement is used to isolate each of these five volumes so that the phase transitions in them can occur independently and free from any obvious sources of heterogeneous nucleation. The small volumes also ensure that the transitions triggered by ionising radiation are strongly suppressed. Here we present the preliminary measurements using this setup, showing both strong supercooling of $^3$He-A and superheating of $^3$He-B, with stochastic processes dominating the phase transitions between the two. The objective is to study the nucleation as a function of temperature and pressure over the full phase diagram, to both better test the proposed extrinsic mechanisms and seek potential parallel intrinsic mechanisms.

cond-mat.supr-con↗

Observation of suppressed viscosity in the normal state of $^3$He due to superfluid fluctuations

By monitoring the quality factor of a quartz tuning fork oscillator we have observed a fluctuation-driven reduction in the viscosity of bulk $^3$He in the normal state near the superfluid transition temperature, $T_c$. These fluctuations, which are only found within $100 μ$K of $T_c$, play a vital role in the theoretical modeling of ordering; they encode details about the Fermi liquid parameters, pairing symmetry, and scattering phase shifts. They will be of crucial importance for transport probes of the topologically nontrivial features of superfluid $^3$He under strong confinement. Here we characterize the temperature and pressure dependence of the fluctuation signature, finding data collapse consistent with the predicted theoretical behavior.

cond-mat.supr-con↗

Effect of Rough Walls on Transport in Mesoscopic $^3$He Films

The interplay of bulk and boundary scattering is explored in a regime where quantum size effects modify mesoscopic transport in a degenerate Fermi liquid film of $^3$He on a rough surface. We discuss mass transport and the momentum relaxation time of the film in a torsional oscillator geometry within the framework of a quasiclassical theory that includes the experimentally determined power spectrum of the rough surface. The theory explains the anomalous temperature dependence of the relaxation rate observed experimentally. We model further studies on $^3$He confined in nanofluidic sample chambers with lithographically defined surface roughness. The improved understanding of surface roughness scattering can be extended to the analogous system of electrons in metals and suggests routes to improve the conductivity of thin metallic films.

cond-mat.mes-hall↗

Evidence for a Spatially-Modulated Superfluid Phase of $^3$He under Confinement

In superfluid $^3$He-B confined in a slab geometry, domain walls between regions of different order parameter orientation are predicted to be energetically stable. Formation of the spatially-modulated superfluid stripe phase has been proposed. We confined $^3$He in a 1.1 $μ$m high microfluidic cavity and cooled it into the B phase at low pressure, where the stripe phase is predicted. We measured the surface-induced order parameter distortion with NMR, sensitive to the formation of domains. The results rule out the stripe phase, but are consistent with 2D modulated superfluid order.

cond-mat.other↗

Measuring frequency fluctuations in nonlinear nanomechanical resonators

Advances in nanomechanics within recent years have demonstrated an always expanding range of devices, from top-down structures to appealing bottom-up MoS$_2$ and graphene membranes, used for both sensing and component-oriented applications. One of the main concerns in all of these devices is frequency noise, which ultimately limits their applicability. This issue has attracted a lot of attention recently, and the origin of this noise remains elusive up to date. In this Letter we present a very simple technique to measure frequency noise in nonlinear mechanical devices, based on the presence of bistability. It is illustrated on silicon-nitride high-stress doubly-clamped beams, in a cryogenic environment. We report on the same $T/f$ dependence of the frequency noise power spectra as reported in the literature. But we also find unexpected {\it damping fluctuations}, amplified in the vicinity of the bifurcation points; this effect is clearly distinct from already reported nonlinear dephasing, and poses a fundamental limit on the measurement of bifurcation frequencies. The technique is further applied to the measurement of frequency noise as a function of mode number, within the same device. The relative frequency noise for the fundamental flexure $δf/f_0$ lies in the range $0.5 - 0.01~$ppm (consistent with literature for cryogenic MHz devices), and decreases with mode number in the range studied. The technique can be applied to {\it any types} of nano-mechanical structures, enabling progresses towards the understanding of intrinsic sources of noise in these devices.

cond-mat.mes-hall↗

Low-power photothermal self-oscillation of bimetallic nanowires

We investigate the nonlinear mechanics of a bimetallic, optically absorbing SiN-Nb nanowire in the presence of incident laser light and a reflecting Si mirror. Situated in a standing wave of optical intensity and subject to photothermal forces, the nanowire undergoes self-induced oscillations at low incident light thresholds of $<1\, \rm{μW}$ due to engineered strong temperature-position ($T$-$z$) coupling. Along with inducing self-oscillation, laser light causes large changes to the mechanical resonant frequency $ω_0$ and equilibrium position $z_0$ that cannot be neglected. We present experimental results and a theoretical model for the motion under laser illumination. In the model, we solve the governing nonlinear differential equations by perturbative means to show that self-oscillation amplitude is set by the competing effects of direct $T$-$z$ coupling and $2ω_0$ parametric excitation due to $T$-$ω_0$ coupling. We then study the linearized equations of motion to show that the optimal thermal time constant $τ$ for photothermal feedback is $τ\to \infty$ rather than the widely reported $ω_0 τ= 1$. Lastly, we demonstrate photothermal quality factor ($Q$) enhancement of driven motion as a means to counteract air damping. Understanding photothermal effects on micromechanical devices, as well as nonlinear aspects of optics-based motion detection, can enable new device applications as oscillators or other electronic elements with smaller device footprints and less stringent ambient vacuum requirements.

cond-mat.mes-hall↗

Evanescent field optical readout of graphene mechanical motion at room temperature

Graphene mechanical resonators have recently attracted considerable attention for use in precision force and mass sensing applications. To date, readout of their oscillatory motion has typically required cryogenic conditions to achieve high sensitivity, restricting their range of applications. Here we report the first demonstration of evanescent optical readout of graphene motion, using a scheme which does not require cryogenic conditions and exhibits enhanced sensitivity and bandwidth at room temperature. We utilise a high $Q$ microsphere to enable evanescent readout of a 70 $μ$m diameter graphene drum resonator with a signal-to-noise ratio of greater than 25 dB, corresponding to a transduction sensitivity of $S_{N}^{1/2} = $ 2.6 $\times 10^{-13}$ m $\mathrm{Hz}^{-1/2}$. The sensitivity of force measurements using this resonator is limited by the thermal noise driving the resonator, corresponding to a force sensitivity of $F_{min} = 1.5 \times 10^{-16}$ N ${\mathrm{Hz}}^{-1/2}$ with a bandwidth of 35 kHz at room temperature (T = 300 K). Measurements on a 30 $μ$m graphene drum had sufficient sensitivity to resolve the lowest three thermally driven mechanical resonances.

cond-mat.mes-hall↗

Graphene Metallization of High-Stress Silicon Nitride Resonators for Electrical Integration

High stress stoichiometric silicon nitride resonators, whose quality factors exceed one million, have shown promise for applications in sensing and signal processing. Yet, electrical integration of the insulating silicon nitride resonators has been challenging, as depositing even a thin layer of metal degrades the quality factor significantly. In this work, we show that graphene used as a conductive coating for Si3N4 membranes reduces the quality factor by less than 30 % on average, which is minimal when compared to the effect of conventional metallization layers such as chromium or aluminum. The electrical integration of Si3N4-Graphene (SiNG) heterostructure resonators is demonstrated with electrical readout and electro-static tuning of the frequency by up to 1 % per volt. These studies demonstrate the feasibility of hybrid graphene/nitride mechanical resonators in which the electrical properties of graphene are combined with the superior mechanical performance of silicon nitride.

cond-mat.mtrl-sci↗

Synchronous imaging for rapid visualization of complex vibration profiles in electromechanical microresonators

Synchronous imaging is used in dynamic space-domain vibration profile studies of capacitively driven, thin n+ doped poly-silicon microbridges oscillating at rf frequencies. Fast and high-resolution actuation profile measurements of micromachined resonators are useful when significant device nonlinearities are present. For example, bridges under compressive stress near the critical Euler value often reveal complex dynamics stemming from a state close to the onset of buckling. This leads to enhanced sensitivity of the vibration modes to external conditions, such as pressure, temperatures, and chemical composition, the global behavior of which is conveniently evaluated using synchronous imaging combined with spectral measurements. We performed an experimental study of the effects of high drive amplitude and ambient pressure on the resonant vibration profiles in electrically-driven microbridges near critical buckling. Numerical analysis of electrostatically driven post-buckled microbridges supports the richness of complex vibration dynamics that are possible in such micro-electromechanical devices.

cond-mat.mes-hall↗

Impermeable Atomic Membranes from Graphene Sheets

We demonstrate that a monolayer graphene membrane is impermeable to standard gases including helium. By applying a pressure difference across the membrane, we measure both the elastic constants and the mass of a single layer of graphene. This pressurized graphene membrane is the world's thinnest balloon and provides a unique separation barrier between 2 distinct regions that is only one atom thick.

cond-mat.mtrl-sci↗