arXiv subjects

Jeff S. Lundeen

Publications and source records attributed to Jeff S. Lundeen.

At least 37 records · Page 2Linked to original sources

arXiv2021

Designing high-performance propagation-compressing spaceplates using thin-film multilayer stacks

The development of metasurfaces has enabled unprecedented portability and functionality in flat optical devices. Spaceplates have recently been introduced as a complementary element to reduce the space between individual metalenses. This will further miniaturize entire imaging devices. However, a spaceplate necessitates a non-local optical response -- one which depends on the transverse spatial frequency component of a light field -- therefore making it challenging both to design them and to assess their ultimate performance and potential. Here, we employ inverse-design techniques to explore the behaviour of general thin-film-based spaceplates. We observe a tradeoff between the compression factor R and the numerical aperture NA of such devices; we obtained a compression factor of R = 5.5 for devices with an NA = 0.42 up to a record R = 340 with NA of 0.017. Our work illustrates that even simple designs consisting of realistic materials (i.e., silicon and glass) permit capable spaceplates for monochromatic applications.

physics.optics↗

arXiv2021

An optic to replace space and its application towards ultra-thin imaging systems

Centuries of effort to improve imaging has focused on perfecting and combining lenses to obtain better optical performance and new functionalities. The arrival of nanotechnology has brought to this effort engineered surfaces called metalenses, which promise to make imaging devices more compact. However, unaddressed by this promise is the space between the lenses, which is crucial for image formation but takes up by far the most room in imaging systems. Here, we address this issue by presenting the concept of and experimentally demonstrating an optical 'spaceplate', an optic that effectively propagates light for a distance that can be considerably longer than the plate thickness. Such an optic would shrink future imaging systems, opening the possibility for ultra-thin monolithic cameras. More broadly, a spaceplate can be applied to miniaturize important devices that implicitly manipulate the spatial profile of light, for example, solar concentrators, collimators for light sources, integrated optical components, and spectrometers.

physics.optics↗

arXiv2020

Approaching quantum-limited metrology with imperfect detectors by using weak-value amplification

Weak value amplification (WVA) is a metrological protocol that amplifies ultra-small physical effects. However, the amplified outcomes necessarily occur with highly suppressed probabilities, leading to the extensive debate on whether the overall measurement precision is improved in comparison to that of conventional measurement (CM). Here, we experimentally demonstrate the unambiguous advantages of WVA that overcome practical limitations including noise and saturation of photo-detection and maintain a shot-noise-scaling precision for a large range of input light intensity well beyond the dynamic range of the photodetector. The precision achieved by WVA is six times higher than that of CM in our setup. Our results clear the way for the widespread use of WVA in applications involving the measurement of small signals including precision metrology and commercial sensors.

quant-ph↗

arXiv2020

Pump depletion in parametric down-conversion with low pump energies

We report the efficient generation of high-gain parametric down-conversion, including pump depletion, with pump powers as low as 100 $μ$W (energies $0.1$~$μ$J/pulse) and conversion efficiencies up to 33\%. In our simple configuration, the pump beam is tightly focused into a bulk periodically poled lithium niobate crystal placed in free space. We also observe a change in the photon number statistics for both the pump and down-converted beams as the pump power increases to reach the depleted pump regime. The experimental results are a clear signature of the interplay between the pump and the down-converted beams in highly efficient parametric down-conversion sources.

quant-ph↗

arXiv2019

Theory of Four-Wave Mixing of Cylindrical Vector Beams in Optical Fibers

Cylindrical vector (CV) beams are a set of transverse spatial modes that exhibit a cylindrically symmetric intensity profile and a variable polarization about the beam axis. They are composed of a non-separable superposition of orbital and spin angular momentum. Critically, CV beams are also the eigenmodes of optical fiber and, as such, are of wide-spread practical importance in photonics and have the potential to increase communications bandwidth through spatial multiplexing. Here, we derive the coupled amplitude equations that describe the four-wave mixing (FWM) of CV beams in optical fibers. These equations allow us to determine the selection rules that govern the interconversion of CV modes in FWM processes. With these selection rules, we show that FWM conserves the total angular momentum, the sum of orbital and spin angular momentum, in the conversion of two input photons to two output photons. When applied to spontaneous four-wave mixing, the selection rules show that photon pairs can be generated in CV modes directly and can be entangled in those modes. Such quantum states of light in CV modes could benefit technologies such as quantum key distribution with satellites.

physics.optics↗

arXiv2019

Arbitrary optical wave evolution with Fourier transforms and phase masks

A large number of applications in classical and quantum photonics require the capability of implementing arbitrary linear unitary transformations on a set of optical modes. In a seminal work by Reck et al. it was shown how to build such multiport universal interferometers with a mesh of beam splitters and phase shifters, and this design became the basis for most experimental implementations in the last decades. However, the design of Reck et al. is difficult to scale up to a large number of modes, which would be required for many applications. Here we present a constructive proof that it is possible to realize a multiport universal interferometer on N modes with a succession of 6N Fourier transforms and 6N+1 phase masks, for any even integer N. Furthermore, we provide an algorithm to find the correct succesion of Fourier transforms and phase masks to realize a given arbitrary unitary transformation. Since Fourier transforms and phase masks are routinely implemented in several optical setups and they do not suffer from the scalability issues associated with building extensive meshes of beam splitters, we believe that our design can be useful for many applications in photonics.

quant-ph↗

arXiv2019

High-dimension experimental tomography of a path-encoded photon quantum-state

Quantum information protocols often rely on tomographic techniques to determine the state of the system. A popular method of encoding information is on the different paths a photon may take, for example, parallel waveguides in integrated optics. However, reconstruction of states encoded onto a large number of paths is often prohibitively resource intensive and requires complicated experimental setups. Addressing this, we present a simple method for determining the state of a photon in a superposition of d paths using a rotating one-dimensional optical Fourier Transform. We establish the theory and experimentally demonstrate the technique by measuring a wide variety of six-dimensional density matrices. The average fidelity of these with the expected state is as high as 0.9852 +/- 0.0008. This performance is comparable or exceeds established tomographic methods for other types of systems.

quant-ph↗

arXiv2018

The phase sensitivity of a fully quantum three-mode nonlinear interferometer

We study a nonlinear interferometer consisting of two consecutive parametric amplifiers, where all three optical fields (pump, signal and idler) are treated quantum mechanically, allowing for pump depletion and other quantum phenomena. The interaction of all three fields in the final amplifier leads to an interference pattern from which we extract the phase uncertainty. We find that the phase uncertainty oscillates around a saturation level that decreases as the mean number $N$ of input pump photons increases. For optimal interaction strengths, we also find a phase uncertainty below the shot-noise level and obtain a Heisenberg scaling $1/N$. This is in contrast to the conventional treatment within the parametric approximation, where the Heisenberg scaling is observed as a function of the number of down-converted photons inside the interferometer.

quant-ph↗

arXiv2018

A variable partially-polarizing beam splitter

We present designs for variably polarizing beam splitters. These are beam splitters allowing the complete and independent control of the horizontal and vertical polarization splitting ratios. They have quantum optics and quantum information applications, such as quantum logic gates for quantum computing and non-local measurements for quantum state estimation. At the heart of each design is an interferometer. We experimentally demonstrate one particular implementation, a displaced Sagnac interferometer configuration, that provides an inherent instability to air currents and vibrations. Furthermore, this design does not require any custom-made optics but only common components which can be easily found in an optics laboratory.

physics.ins-det↗

arXiv2018

An experimental investigation of measurement-induced disturbance and time symmetry in quantum physics

Unlike regular time evolution governed by the Schrödinger equation, standard quantum measurement appears to violate time-reversal symmetry. Measurement creates random disturbances (e.g., collapse) that prevents back-tracing the quantum state of the system. The effect of these disturbances is explicit in the results of subsequent measurements. In this way, the joint result of sequences of measurements depends on the order in time in which those measurements are performed. One might expect that if the disturbance could be eliminated this time-ordering dependence would vanish. Following a recent theoretical proposal [A. Bednorz et al 2013 New J. Phys. 15 023043], we experimentally investigate this dependence for a kind of measurement that creates an arbitrarily small disturbance, weak measurement. We perform various sequences of a set of polarization weak measurements on photons. We experimentally demonstrate that, although the weak measurements are minimally disturbing, their time-ordering affects the outcome of the measurement sequence for quantum systems.

quant-ph↗

arXiv2017

General Lossless Spatial Polarization Transformations

Liquid crystals allow for the real-time control of the polarization of light. We describe and provide some experimental examples of the types of general polarization transformations, including universal polarization transformations, that can be accomplished with liquid crystals in tandem with fixed waveplates. Implementing these transformations with an array of liquid crystals, e.g., a spatial light modulator, allows for the manipulation of the polarization across a beam's transverse plane. We outline applications of such general spatial polarization transformations in the generation of exotic types of vector polarized beams, a polarization magnifier, and the correction of polarization aberrations in light fields.

physics.optics↗

arXiv2016

Weak Value Amplification Can Outperform Conventional Measurement in the Presence of Detector Saturation

Weak value amplification (WVA) is a technique in which one can magnify the apparent strength of a measurement signal. Some have claimed that WVA can outperform more conventional measurement schemes in parameter estimation. Nonetheless, a significant body of theoretical work has challenged this perspective, suggesting WVA to be fundamentally sub-optimal. Optimal measurements may not be practical, however. Two practical considerations that have been conjectured to afford a benefit to WVA over conventional measurement are certain types of noise and detector saturation. Here, we report a theoretical study of the role of saturation and pixel noise in WVA-based measurement, in which we carry out a Bayesian analysis of the Fisher information available using a saturable, pixelated, digitized, and/or noisy detector. We draw two conclusions: first, that saturation alone does not confer an advantage to the WVA approach over conventional measurement, and second, that WVA can outperform conventional measurement when saturation is combined with intrinsic pixel noise and/or digitization.

quant-ph↗

arXiv2016

Super-critical phasematching for photon pair generation in structured light modes

We propose a method for directly producing radially and azimuthally polarized photon pairs through spontaneous parametric downconversion (SPDC). This method constitutes a novel geometry for SPDC, in which a radially polarized Bessel-Gauss pump beam is directed into a nonlinear crystal, with the central propagation direction parallel to the crystal axis. The phasematching conditions are controlled by changing the opening angle of the pump beam; as the crystal axis cannot be tuned, we refer to this process as super-critical phasematching. We model and plot the spatial and polarization output distributions for Type-I and Type-II super-critical phasematching.

quant-ph↗

arXiv2013

Observing Dirac's classical phase space analog to the quantum state

In 1945, Dirac attempted to develop a "formal probability" distribution to describe quantum operators in terms of two non-commuting variables, such as position x and momentum p [Rev. Mod. Phys. 17, 195 (1945)]. The resulting quasi-probability distribution is a complete representation of the quantum state and can be observed directly in experiments. We measure Dirac's distribution for the quantum state of the transverse degree of freedom of a photon by weakly measuring transverse x so as to not randomize the subsequent p measurement. Further, we show that the distribution has the classical-like feature that it transforms (e.g., propagates) according to Bayes' law.

quant-ph↗

arXiv2012

Mapping coherence in measurement via full quantum tomography of a hybrid optical detector

Quantum states and measurements exhibit wave-like --- continuous, or particle-like --- discrete, character. Hybrid discrete-continuous photonic systems are key to investigating fundamental quantum phenomena, generating superpositions of macroscopic states, and form essential resources for quantum-enhanced applications, e.g. entanglement distillation and quantum computation, as well as highly efficient optical telecommunications. Realizing the full potential of these hybrid systems requires quantum-optical measurements sensitive to complementary observables such as field quadrature amplitude and photon number. However, a thorough understanding of the practical performance of an optical detector interpolating between these two regions is absent. Here, we report the implementation of full quantum detector tomography, enabling the characterization of the simultaneous wave and photon-number sensitivities of quantum-optical detectors. This yields the largest parametrization to-date in quantum tomography experiments, requiring the development of novel theoretical tools. Our results reveal the role of coherence in quantum measurements and demonstrate the tunability of hybrid quantum-optical detectors.

quant-ph↗

arXiv2011

Weak measurement of the Dirac distribution

Recent work [J.S. Lundeen et al. Nature, 474, 188 (2011)] directly measured the wavefunction by weakly measuring a variable followed by a normal (i.e. `strong') measurement of the complementary variable. We generalize this method to mixed states by considering the weak measurement of the product of the two observables, which, as a non-Hermitian operator, is normally unobservable. This generalized method provides mixed states an operational definition related to the operator representation proposed by Dirac. Uniquely, it can be performed `in situ', determing the quantum state without destroying it.

quant-ph↗

arXiv2011

Direct measurement of general quantum states using weak measurement

Recent work [J.S. Lundeen et al. Nature, 474, 188 (2011)] directly measured the wavefunction by weakly measuring a variable followed by a normal (i.e. `strong') measurement of the complementary variable. We generalize this method to mixed states by considering the weak measurement of various products of these observables, thereby providing the density matrix an operational definition in terms of a procedure for its direct measurement. The method only requires measurements in two bases and can be performed `in situ', determining the quantum state without destroying it.

quant-ph↗

arXiv2011

Direct Measurement of the Quantum Wavefunction

Central to quantum theory, the wavefunction is the complex distribution used to completely describe a quantum system. Despite its fundamental role, it is typically introduced as an abstract element of the theory with no explicit definition. Rather, physicists come to a working understanding of the wavefunction through its use to calculate measurement outcome probabilities via the Born Rule. Presently, scientists determine the wavefunction through tomographic methods, which estimate the wavefunction that is most consistent with a diverse collection of measurements. The indirectness of these methods compounds the problem of defining the wavefunction. Here we show that the wavefunction can be measured directly by the sequential measurement of two complementary variables of the system. The crux of our method is that the first measurement is performed in a gentle way (i.e. weak measurement) so as not to invalidate the second. The result is that the real and imaginary components of the wavefunction appear directly on our measurement apparatus. We give an experimental example by directly measuring the transverse spatial wavefunction of a single photon, a task not previously realized by any method. We show that the concept is universal, being applicable both to other degrees of freedom of the photon (e.g. polarization, frequency, etc.) and to other quantum systems (e.g. electron spin-z quantum state, SQUIDs, trapped ions, etc.). Consequently, this method gives the wavefunction a straightforward and general definition in terms of a specific set of experimental operations. We expect it to expand the range of quantum systems scientists are able to characterize and initiate new avenues to understand fundamental quantum theory.

quant-ph↗