arXiv subjects

Jeffrey B. Neaton

Publications and source records attributed to Jeffrey B. Neaton.

At least 91 records · Page 5Linked to original sources

arXiv2017

A new class of half-metallic ferromagnets from first principles

Half-metallic ferromagnetism (HMFM) occurs rarely in materials and yet offers great potential for spintronic devices. Recent experiments suggest a class of compounds with the `ThCr$_{2}$Si$_{2}$' (122) structure -- isostructural and containing elements common with Fe pnictide-based superconductors -- can exhibit HMFM. Here we use $ab$ $initio$ density-functional theory calculations to understand the onset of half-metallicity in this family of materials and explain the appearance of ferromagnetism at a quantum critical point. We also predict new candidate materials with HMFM and high Curie temperatures through A-site alloying.

cond-mat.mtrl-sci↗

arXiv2017

An assessment of the low-lying excitation energies and triplet instabilities of organic molecules with an ab initio Bethe-Salpeter equation approach

The accurate prediction of singlet and triplet excitation energies is of significant fundamental interest and is critical for many applications. An area of intense research, most calculations of singlet and triplet energies use time-dependent density functional theory (TDDFT) in conjunction with an approximate exchange-correlation functional. In this work, we examine and critically assess an alternative method for predicting low-lying neutral excitations with similar computational cost, the ab initio Bethe-Salpeter equation (BSE) approach, and compare results against high-accuracy wavefunction-based methods. We consider singlet and triplet excitations of 27 prototypical organic molecules, including members of Thiel's set, the acene series, and several aromatic hydrocarbons exhibiting charge-transfer-like excitations. Analogous to its impact in TDDFT, we find that the Tamm-Dancoff approximation (TDA) overcomes triplet instabilities in the BSE approach, improving both triplet and singlet energetics relatively to higher level theories. Finally, we find that BSE-TDA calculations built on good DFT starting points, such as those utilizing optimally-tuned range-separated hybrid functionals, can yield accurate singlet and triplet excitation energies for gas-phase organic molecules.

physics.comp-ph↗

arXiv2017

Assessment of two hybrid van der Waals density functionals for covalent and non-covalent binding of molecules

Two hybrid van der Waals density functionals (vdW-DFs) are constructed using 25%, Fock exchange with i) the consistent-exchange vdW-DF-cx functional and ii) with the vdW-DF2 functional. The ability to describe covalent and non-covalent binding properties of molecules are assessed. For properties related to covalent binding, atomization energies (G2-1 set), molecular reaction energies (G2RC set), as well as ionization energies (G21IP set) are benchmarked against experimental reference values. We find that hybrid-vdW-DF-cx yields results that are rather similar to those of the standard non-empirical hybrid PBE0 [JCP 110, 6158 (1996)]. Hybrid vdW-DF2 follows somewhat different trends, showing on average significantly larger deviations from the reference energies, with a MAD of 14.5 kcal/mol for the G2-1 set. Non-covalent binding properties of molecules are assessed using the S22 benchmark set of non-covalently bonded dimers and the X40 set of dimers of small halogenated molecules, using wavefunction-based quantum chemistry results for references. For the S22 set, hybrid-vdW-DF-cx performs better than standard vdW-DF-cx for the mostly hydrogen-bonded systems. Hybrid-vdW-DF2 offers a slight improvement over standard vdW-DF2. Similar trends are found for the X40 set, with hybrid-vdW-DF-cx performing particularly well for binding involving the strongly polar hydrogen halides, but poorly for systems with tiny binding energies. Our study of the X40 set reveals both the potential of mixing Fock exchange with vdW-DF, but also highlights shortcomings of the hybrids constructed here. The solid performance of hybrid-vdW-DF-cx for covalent-bonded systems, as well as the strengths and issues uncovered for non-covalently bonded systems, makes this study a good starting point for developing even more precise hybrid vdW-DFs.

physics.chem-ph↗

arXiv2017

Energy Level Alignment at Molecule-Metal Interfaces from an Optimally-Tuned Range-Separated Hybrid Functional

The alignment of the frontier orbital energies of an adsorbed molecule with the substrate Fermi level at metal-organic interfaces is a fundamental observable of significant practical importance in nanoscience and beyond. Typical density functional theory calculations, especially those using local and semi-local functionals, often underestimate level alignment leading to inaccurate electronic structure and charge transport properties. In this work, we develop a new fully self-consistent predictive scheme to accurately compute level alignment at certain classes of complex heterogeneous molecule-metal interfaces based on optimally-tuned range-separated hybrid functionals. Starting from a highly accurate description of the gas-phase electronic structure, our method by construction captures important nonlocal surface polarization effects via tuning of the long-range screened exchange in a range-separated hybrid in a non-empirical and system-specific manner. We implement this functional in a plane-wave code and apply it to several physisorbed and chemisorbed molecule-metal interface systems. Our results are in quantitative agreement with experiments, both the level alignment and work function changes. Our approach constitutes a new practical scheme for accurate and efficient calculations of the electronic structure of molecule-metal interfaces.

cond-mat.mes-hall↗

arXiv2017

Topological Materials Discovery using Electron Filling Constraints

Nodal semimetals, materials systems with nodal-point or -line Fermi surfaces, are much sought after for their novel transport and topological properties. Identification of experimental materials candidates, however, has mainly relied on exhaustive database searches. Here we show how recent studies on the interplay between electron filling and nonsymmorphic space-group symmetries can guide the search for nodal semimetals which are `filling-enforced'. We recast the previously-derived constraints on the allowed electron fillings for band insulators in the 230 space groups into a new form, which enables effective screening of materials candidates based solely on their (1) space group, (2) electron count in the formula unit, and (3) multiplicity of the formula unit. This criterion greatly reduces the computation load for discovering topological materials in a database of previously-synthesized compounds. Of the more than 30,000 entires listed in a few selected nonsymmorphic space groups, our filling criterion alone eliminates 96% of the entries before they are passed on for further analysis. From this guided search, we discover a handful of candidates, including the monoclinic crystals Ca$_2$Pt$_2$Ga, AgF$_2$, and Ca$_2$InOsO$_6$, and the orthorhombic crystal CsHg$_2$. Based on ab initio calculations, we show that these materials have filling-enforced Dirac nodes near the Fermi energy. In addition, we also identify CaPtGa as a promising filling-enforced Dirac-ring semimetal candidate.

cond-mat.mtrl-sci↗

arXiv2016

Electric field and strain induced Rashba effect in hybrid halide perovskites

Using first principles density functional theory calculations, we show how Rashba-type energy band splitting in the hybrid organic-inorganic halide perovskites APbX$_3$ (A=CH$_3$NH$_3^+$, CH(NH$_2$)$_2^+$, Cs$^+$ and X=I, Br) can be tuned and enhanced with electric fields and anisotropic strain. In particular, we demonstrate that the magnitude of the Rashba splitting of tetragonal (CH$_3$NH$_3$)PbI$_3$ grows with increasing macroscopic alignment of the organic cations and electric polarization, indicating appreciable tunability with experimentally-feasible applied fields, even at room temperature. Further, we quantify the degree to which this effect can be tuned via chemical substitution at the A and X sites, which alters amplitudes of different polar distortion patterns of the inorganic PbX$_3$ cage that directly impact Rashba splitting. In addition, we predict that polar phases of CsPbI$_3$ and (CH$_3$NH$_3$)PbI$_3$ with $R3c$ symmetry possessing considerable Rashba splitting might be accessible at room temperature via anisotropic strain induced by epitaxy, even in the absence of electric fields.

cond-mat.mtrl-sci↗

arXiv2016

Evaluating the GW Approximation with CCSD(T) for Charged Excitations Across the Oligoacenes

Charged excitations of the oligoacene family of molecules, relevant for astrophysics and technological applications, are widely studied and therefore provide an excellent system for benchmarking theoretical methods. In this work, we evaluate the performance of many-body perturbation theory within the GW approximation relative to new high-quality CCSD(T) reference data for charged excitations of the acenes. We compare GW calculations with a number of hybrid density functional theory starting points and with eigenvalue self-consistency. Special focus is given to elucidating the trend of GW-predicted excitations with molecule length increasing from benzene to hexacene. We find that GW calculations with starting points based on an optimally tuned range-separated hybrid (OTRSH) density functional and eigenvalue self-consistency can yield quantitative ionization potentials for the acenes. However, for larger acenes, the predicted electron affinities can deviate considerably from reference values. Our work paves the way for predictive and cost-effective GW calculations of charged excitations of molecules and identifies certain limitations of current GW methods used in practice for larger molecules.

physics.chem-ph↗

arXiv2016

Interplay of bias-driven charging and the vibrational Stark effect in molecular junctions

We observe large, reversible, bias driven changes in the vibrational energies of PCBM, based on simultaneous transport and surface-enhanced Raman spectroscopy (SERS) measurements on PCBM-gold junctions. A combination of linear and quadratic shifts in vibrational energies with voltage is analyzed and compared with similar measurements involving C60-gold junctions. A theoretical model based on density functional theory (DFT) calculations suggests that both a vibrational Stark effect and bias-induced charging of the junction contribute to the shifts in vibrational energies. In the PCBM case, a linear vibrational Stark effect is observed due to the permanent electric dipole moment of PCBM. The vibrational Stark shifts shown here for PCBM junctions are comparable to or larger than the charging effects that dominate in C60 junctions.

cond-mat.mes-hall↗

arXiv2016

Effects of quantum confinement on excited state properties of SrTiO$_3$ from ab initio many-body perturbation theory

The Ruddlesden-Popper (RP) homologous series Sr$_{n+1}$Ti$_{n}$O$_{3n+1}$ provides a useful template for the study and control of the effects of dimensionality and quantum confinement on the excited state properties of the complex oxide SrTiO$_3$. We use ab initio many-body perturbation theory within the $GW$ approximation and the Bethe-Salpeter equation approach to calculate quasiparticle energies and absorption spectrum of Sr$_{n+1}$Ti$_{n}$O$_{3n+1}$ for $n=1-5$ and $\infty$. Our computed direct and indirect optical gaps are in excellent agreement with spectroscopic measurements. The calculated optical spectra reproduce the main experimental features and reveal excitonic structure near the gap edge. We find that electron-hole interactions are important across the series, leading to significant exciton binding energies that increase for small $n$ and reach a value of 330~meV for $n=1$, a trend attributed to increased quantum confinement. We find that the lowest-energy singlet exciton of Sr$_2$TiO$_4$ ($n=1$) localizes in the 2D plane defined by the TiO$_2$ layer, and explain the origin of its localization.

cond-mat.mtrl-sci↗

arXiv2016

Structural and excited-state properties of oligoacene crystals from first principles

Molecular crystals are a prototypical class of van der Waals (vdW) bound organic materials with excited state properties relevant for optoelectronics applications. Predicting the structure and excited state properties of molecular crystals presents a challenge for electronic structure theory, as standard approximations to density functional theory (DFT) do not capture long range vdW dispersion interactions and do not yield excited state properties. In this work, we use a combination of DFT including vdW forces) using both non local correlation functionals and pair wise correction methods (together with many body perturbation theory (MBPT) to study the geometry and excited states, respectively, of the entire series of oligoacene crystals, from benzene to hexacene. We find that vdW methods can predict lattice constants within 1 percent of the experimental measurements, on par with the previously reported accuracy of pairwise approximations for the same systems. We further find that excitation energies are sensitive to geometry, but if optimized geometries are used MBPT can yield excited state properties within a few tenths of an eV from experiment. We elucidate trends in MBPT computed charged and neutral excitation energies across the acene series and discuss the role of common approximations used in MBPT.

cond-mat.mtrl-sci↗

arXiv2016

Observation of charge density wave order in 1D mirror twin boundaries of single-layer MoSe2

Properties of two-dimensional transition metal dichalcogenides are highly sensitive to the presence of defects in the crystal structure. A detailed understanding of defect structure may lead to control of material properties through defect engineering. Here we provide direct evidence for the existence of isolated, one-dimensional charge density waves at mirror twin boundaries in single-layer MoSe2. Our low-temperature scanning tunneling microscopy/spectroscopy measurements reveal a substantial bandgap of 60 - 140 meV opening at the Fermi level in the otherwise one dimensional metallic structure. We find an energy-dependent periodic modulation in the density of states along the mirror twin boundary, with a wavelength of approximately three lattice constants. The modulations in the density of states above and below the Fermi level are spatially out of phase, consistent with charge density wave order. In addition to the electronic characterization, we determine the atomic structure and bonding configuration of the one-dimensional mirror twin boundary by means of high-resolution non-contact atomic force microscopy. Density functional theory calculations reproduce both the gap opening and the modulations of the density of states.

cond-mat.mes-hall↗

arXiv2015

Solid-state optical absorption from optimally-tuned time-dependent range-separated hybrid density functional theory

We present a framework for obtaining reliable solid-state charge and optical excitations and spectra from optimally-tuned range-separated hybrid density functional theory. The approach, which is fully couched within the formal framework of generalized Kohn-Sham theory, allows for accurate prediction of exciton binding energies. We demonstrate our approach through first principles calculations of one- and two-particle excitations in pentacene, a molecular semiconducting crystal, where our work is in excellent agreement with experiments and prior computations. We further show that with one adjustable parameter, set to produce an accurate bandgap, this method accurately predicts band structures and optical spectra of silicon and lithium flouride, prototypical covalent and ionic solids. Our findings indicate that for a broad range of extended bulk systems, this method may provide a computationally inexpensive alternative to many-body perturbation theory, opening the door to studies of materials of increasing size and complexity.

cond-mat.mtrl-sci↗

arXiv2015

A systematic benchmark of the ab initio Bethe-Salpeter equation approach for low-lying optical excitations of small organic molecules

The predictive power of the ab initio Bethe-Salpeter equation (BSE) approach, rigorously based on many-body Green's function theory but incorporating information from density functional theory, has already been demonstrated for the optical gaps and spectra of solid-state systems. Interest in photoactive hybrid organic/inorganic systems has recently increased, and so has the use of the BSE for computing neutral excitations of organic molecules. However, no systematic benchmarks of the BSE for neutral electronic excitations of organic molecules exist. Here, we study the performance of the BSE for the 28 small molecules in Thiel's widely-used time-dependent density functional theory benchmark set [M. Schreiber et al. J. Chem. Phys. 128, 134110 (2008)]. We observe that the BSE produces results that depend critically on the mean-field starting point employed in the perturbative approach. We find that this starting point dependence is mainly introduced through the quasiparticle energies obtained at the intermediate GW step, and that with a judicious choice of starting mean-field, singlet excitation energies obtained from BSE are in excellent quantitative agreement with higher-level wavefunction methods. The quality of the triplet excitations is slightly less satisfactory.

cond-mat.mtrl-sci↗

arXiv2014

Z$_2$ topology and superconductivity from symmetry lowering of a 3D Dirac Metal Au$_2$Pb

3D Dirac semi-metals (DSMs) are materials that have massless Dirac electrons and exhibit exotic physical properties It has been suggested that structurally distorting a DSM can create a Topological Insulator (TI), but this has not yet been experimentally verified. Furthermore, quasiparticle excitations known as Majorana Fermions have been theoretically proposed to exist in materials that exhibit superconductivity and topological surface states. Here we show that the cubic Laves phase Au$_2$Pb has a bulk Dirac cone above 100 K that gaps out upon cooling at a structural phase transition to create a topologically non trivial phase that superconducts below 1.2 K. The nontrivial Z$_2$ = -1 invariant in the low temperature phase indicates that Au$_2$Pb in its superconducting state must have topological surface states. These characteristics make Au$_2$Pb a unique platform for studying the transition between bulk Dirac electrons and topological surface states as well as studying the interaction of superconductivity with topological surface states.

cond-mat.supr-con↗

arXiv2014

Adsorption-Induced Solvent-Based Electrostatic Gating of Charge Transport through Molecular Junctions

Recent experiments have shown that transport properties of molecular-scale devices can be reversibly altered by the surrounding solvent. Here, we use a combination of first-principles calculations and experiment to explain this change in transport properties through a shift in the local electrostatic potential at the junction caused by nearby conducting and solvent molecules chemically bound to the electrodes. This effect is found to alter the conductance of bipyridine - gold junctions by more than 50%. Moreover, we develop a general electrostatic model that quantitatively predicts the relationship between conductance and the binding energies and dipoles of the solvent and conducting molecules. Our work shows that solvent induced effects are a viable route for controlling charge and energy transport at molecular-scale interfaces.

cond-mat.mes-hall↗

arXiv2014

Effects of self-consistency and plasmon-pole models on GW calculations for closed-shell molecules

We present theoretical calculations of quasiparticle energies in closed-shell molecules using the GW method. We compare three different approaches: a full-frequency $G_0W_0$ (FF-$G_0W_0$) method with density functional theory (DFT-PBE) used as a starting mean field; a full-frequency $GW_0$ (FF-$GW_0$) method where the interacting Green's function is approximated by replacing the DFT energies with self-consistent quasiparticle energies or Hartree-Fock energies; and a $G_0W_0$ method with a Hybertsen-Louie generalized plasmon-pole model (HL GPP-$G_0W_0$). While the latter two methods lead to good agreement with experimental ionization potentials and electron affinities for methane, ozone, and beryllium oxide molecules, FF-$G_0W_0$ results can differ by more than one electron volt from experiment. We trace this failure of the FF-$G_0W_0$ method to the occurrence of incorrect self-energy poles describing shake-up processes in the vicinity of the quasiparticle energies.

cond-mat.mtrl-sci↗

arXiv2014

Energy-dependent resonance broadening in symmetric and asymmetric molecular junctions from an ab initio non-equilibrium Green's function approach

The electronic structure of organic-inorganic interfaces often feature resonances originating from discrete molecular orbitals coupled to continuum lead states. An example are molecular junctions, individual molecules bridging electrodes, where the shape and peak energy of such resonances dictate junction conductance, thermopower, I-V characteristics and related transport properties. In molecular junctions where off-resonance coherent tunneling dominates transport, resonance peaks in the transmission function are often assumed to be Lorentzian functions with an energy-independent broadening parameter $Γ$. Here we define a new energy-dependent resonance broadening function, $Γ(E)$, based on diagonalization of non-Hermitian matrices, which can describe resonances of a more complex, non-Lorentzian nature and can be decomposed into components associated with the left and right lead, respectively. We compute this quantity via an \emph{ab initio} non-equilibrium Green's function approach based on density functional theory for both symmetric and asymmetric molecular junctions, and show that our definition of $Γ(E)$, when combined with Breit-Wigner formula, reproduces the transmission calculated from DFT-NEGF. Through a series of examples, we illustrate how this approach can shed new light on experiments and understanding of junction transport properties in terms of molecular orbitals.

cond-mat.mes-hall↗

arXiv2014

Elastic Properties of Chemical-Vapor-Deposited Monolayer MoS2, WS2, and Their Bilayer Heterostructures

Elastic properties of materials are an important factor in their integration in applications. Chemical vapor deposited (CVD) monolayer semiconductors are proposed as key components in industrial-scale flexible devices and building blocks of 2D van der Waals heterostructures. However, their mechanical and elastic properties have not been fully characterized. Here we report high 2D elastic moduli of CVD monolayer MoS2 and WS2 (~ 170 N/m), which is very close to the value of exfoliated MoS2 monolayers and almost half the value of the strongest material, graphene. The 2D moduli of their bilayer heterostructures are lower than the sum of 2D modulus of each layer, but comparable to the corresponding bilayer homostructure, implying similar interactions between the hetero monolayers as between homo monolayers. These results not only provide deep insight to understanding interlayer interactions in 2D van der Waals structures, but also potentially allow engineering of their elastic properties as desired.

cond-mat.mtrl-sci↗