Searcharxiv⌕ Search

arXiv subjects

Jeffrey M. McMahon

Publications and source records attributed to Jeffrey M. McMahon.

15 recordsLinked to original sources

Metallic Hydrogen: A Liquid Superconductor?

Metallic hydrogen is expected to exhibit remarkable physics. Of particular interest in this work is the possibility of high-temperature superconductivity. Comparing calculations of the superconducting critical temperatures of the solid phase to melting temperatures over a range of pressures leads to an interesting question: Will the solid, in a superconducting state, melt to a liquid that remains a superconductor? In this work, the possibility of liquid superconductivity in metallic hydrogen is investigated. This is done by first-principles simulations, and using the results of these to solve the Eliashberg equations. These are carried out over the pressure (and temperature) conditions where molecular dissociation is expected to first occur in the solid phase. Over the pressure range $386.8(4)$--$783.7(4)$ GPa, $T_c$ increases from $308(6)$ to $372(2)$ K with a maximum uncertainty of $10$ K; it then decreases to $356(2)$ K at $883.7(3)$ GPa. Comparisons to the solid phase show that the critical temperature is not significantly changed between the two phases, though the physics behind their superconductivity is different. Careful comparisons of these values to recent results in the context of the hydrogen phase diagram show that they are higher than the melting temperatures and that the solid will melt to liquid atomic hydrogen. The results of this work (in this context) therefore suggest that liquid atomic hydrogen will indeed exist in a superconducting state. They also provide the pressure and temperature conditions over which to look for it.

cond-mat.supr-con↗

Temperature-dependent mechanical properties of ZrC and HfC from first principles

In order to gain insight into the effect of elevated temperature on mechanical performance of ZrC and HfC, the temperature-dependent elastic constants of these two carbides have been systematically studied using two different methods (first-principles qusi-harmonic approximation and first-principles qusi-static approximation). Isoentropic C$_{11}$ gradually decrease and the isoentropic C$_{12}$ slightly increases for ZrC and HfC under temperature. While the isoentropic C$_{44}$ of both ZrC and HfC is insensitive to the temperature. In both ZrC and HfC cases, the decline of temperature-dependent C$_{11}$ calculated from QHA is more pronounced than from QSA. Temperature effects on modulus of elasticity, poisson's ratio, elastic anisotropy, hardness and fracture toughness are further explored and discussed. The results indicate that degradation of B, G and E estimated from QHA is more serious than these from QSA at high temperature. From room temperature to 2500 K, the theoretical decreasing slope (from QHA) of B, G, and E is 0.38 GPa$\cdot$K$^{-1}$, 0.30 GPa$\cdot$K$^{-1}$, and 0.32 GPa$\cdot$K$^{-1}$ for ZrC and 0.33 GPa$\cdot$K$^{-1}$, 0.29 GPa$\cdot$K$^{-1}$, and 0.30 GPa$\cdot$K$^{-1}$ for HfC.

cond-mat.mtrl-sci↗

The pseudopotential approach within density-functional theory: the case of atomic metallic hydrogen

Internal energies, enthalpies, phonon dispersion curves, and superconductivity of atomic metallic hydrogen are calculated. The (standard) use pseudopotentials in density-functional theory are compared with full (Coulomb)-potential all-electron linear muffin-tin orbital calculations. Quantitatively similar results are found as far as internal energies are concerned. Larger differences are found for phase-transition pressures; significant enough to affect the phase diagram. Electron--phonon spectral functions $α^2 F(ω)$ also show significant differences. Against expectation, the estimated superconducting critical temperature T$_{c}$ of the first atomic metallic phase I4$_{1}$/amd (Cs-IV) at $500$ GPa is actually higher.

cond-mat.mtrl-sci↗

High-Temperature Superconductivity in the Ti--H System at High Pressures

Search for stable high-pressure compounds in the Ti--H system reveals the existence of titanium hydrides with new stoichiometries, including Ibam-Ti$_2$H$_5$, I4/m-Ti$_5$H$_{13}$, I$\bar{4}$-Ti$_5$H$_{14}$, Fddd-TiH$_4$, Immm-Ti$_2$H$_{13}$, P$\bar{1}$-TiH$_{12}$, and C2/m-TiH$_{22}$. Our calculations predict I4/mmm $\rightarrow$ R$\bar{3}$m and I4/mmm $\rightarrow$ Cmma transitions in TiH and TiH$_2$, respectively. Phonons and the electron--phonon coupling of all searched titanium hydrides are analyzed at high pressure. It is found that Immm-Ti$_2$H$_{13}$ rather than the highest hydrogen content C2/m-TiH$_{22}$, exhibits the highest superconducting critical temperature T$_{c}$. The estimated T$_{c}$ of Immm-Ti$_2$H$_{13}$ and C2/m-TiH$_{22}$ are respectively 127.4--149.4 K ($μ^{*}$=0.1-0.15) at 350 GPa and 91.3--110.2 K at 250 GPa by numerically solving the Eliashberg equations. One of the effects of pressure on T$_{c}$ can be attributed to the softening and hardening of phonons with increasing pressure.

cond-mat.mtrl-sci↗

On the possibility of metastable metallic hydrogen

Metallic hydrogen is expected to exhibit remarkable physics. Examples include high-temperature superconductivity and possible novel types of quantum fluids. These could have revolutionary practical applications. The pressures required to obtain metallic hydrogen, however, are expected to be significant. For practical, and terrestrial applications, a key question is therefore whether this phase is metastable at lower pressures. In this work, this possibility is investigated, using first-principles simulations. The results show that metallic hydrogen is metastable, but strongly suggest that it is not so to ambient conditions. Implications of these results for fundamental physics, and also practical applications of metastable metallic hydrogen are discussed.

cond-mat.mtrl-sci↗

Density functionals from deep learning

Density-functional theory is a formally exact description of a many-body quantum system in terms of its density; in practice, however, approximations to the universal density functional are required. In this work, a model based on deep learning is developed to approximate this functional. Deep learning allows computational models that are capable of naturally discovering intricate structure in large and/or high-dimensional data sets, with multiple levels of abstraction. As no assumptions are made as to the form of this structure, this approach is much more powerful and flexible than traditional approaches. As an example application, the model is shown to perform well on approximating the kinetic-energy density functional for noninteracting electrons. The model is analyzed in detail, and its advantages over conventional machine learning are discussed.

physics.comp-ph↗

The Combined Influence of Nuclear Quantum Effects and van der Waals Interactions on the Structure of Ambient Water

Path-integral molecular dynamics simulations based on density functional theory employing exchange-correlation density functionals capable of treating nonlocal van der Waals (vdW) interactions self-consistently provide a remarkably accurate description of ambient water. Moreover, they suggest that water's structure may be impacted by a combined influence between nuclear quantum effects and vdW interactions. The latter strongly favor the formation of a high-density liquid, whereas the inclusion of the former mitigates this by decreasing the mean hydrogen-bond (H-bond) distance. Examining the structure of water reveals that while the major fraction of molecules do in fact exhibit the traditional picture of near-tetrahedral coordination, the liquid considerably softer than previously simulations have suggested, including a much lower proportion of molecules double-donating H-bonds as well as a much larger distribution of their angles.

physics.chem-ph↗

Benchmark of Exchange-Correlation Functionals for High Pressure Hydrogen using Quantum Monte Carlo

The ab-initio phase diagram of dense hydrogen is very sensitive to errors in the treatment of electronic correlation. Recently, it has been shown that the choice of the density functional has a large effect on the predicted location of both the liquid-liquid phase transition and the solid insulator-to-metal transition in dense hydrogen. To identify the most accurate functional for dense hydrogen applications, we systematically benchmark some of the most commonly used functionals using Quantum Monte Carlo. By considering several measures of functional accuracy, we conclude that the van der Waals and hybrid functionals significantly out perform LDA and PBE. We support these conclusions by analyzing the impact of functional choice on structural optimization in the molecular solid, and on the location of the liquid-liquid phase transition.

cond-mat.mtrl-sci↗

The refraction of surface plasmon polaritons

We show how a complex Snell's law can be used to describe the refraction of surface plasmon polaritons (SPPs) at an interface between two metals, validating its predictions with 3-D electrodynamics simulations. Refraction gives rise to peculiar SPP features including inhomogeneities in the waveform and dispersion relations that depend on the incident wave and associated material. These features make it possible to generate SPPs propagating away from the interface with significant confinement normal to the propagation direction. We also show that it is possible to encode optical properties of the incident material into the refracted SPP. These consequences of metal-metal SPP refraction provide new avenues for the design of plasmonics-based devices.

cond-mat.mes-hall↗

High-Temperature Superconductivity in Atomic Metallic Hydrogen

Superconductivity in the recently proposed ground-state structures of atomic metallic hydrogen is investigated over the pressure range 500 GPa to 3.5 TPa. Near molecular dissociation, the electron--phonon coupling $λ$ and renormalized Coulomb repulsion are similar to the molecular phase. A continuous increase in the critical temperature $T_c$ with pressure is therefore expected, to $\jmmapprox 356$K near 500 GPa. As the atomic phase stabilizes with increasing pressure, $λ$ increases, causing $T_c$ to approach $\jmmapprox 481$K near 700 GPa. At the first atomic--atomic structural phase transformation ($\jmmapprox 1$ -- 1.5 TPa), a discontinuous jump in $λ$ occurs, causing a significant increase in $T_c$ of up to 764K.

cond-mat.supr-con↗

Ground-State Structures of Ice at High-Pressures

\textit{Ab initio} random structure searching based on density functional theory is used to determine the ground-state structures of ice at high pressures. Including estimates of lattice zero-point energies, ice is found to adopt three novel crystal phases. The underlying sub-lattice of O atoms remains similar among them, and the transitions can be characterized by reorganizations of the hydrogen bonds. The symmetric hydrogen bonds of ice X and $Pbcm$ are initially lost as ice transforms to structures with symmetries $Pmc2_1$ (800 - 950 GPa) and $P2_1$ (1.17 TPa), but they are eventually regained at 5.62 TPa in a layered structure $C2/m$. The $P2_1 \rightarrow C2/m$ transformation also marks the insulator-to-metal transition in ice, which occurs at a significantly higher pressure than recently predicted.

cond-mat.other↗

Zero-Temperature Structures of Atomic Metallic Hydrogen

Ab initio random structure searching with density functional theory was used to determine the zero-temperature structures of atomic metallic hydrogen from 500 GPa to 5 TPa. Including zero point motion in the harmonic approximation, we estimate that molecular hydrogen dissociates into a monatomic body-centered tetragonal structure near 500 GPa (r_s = 1.225), which then remains stable to 2.5 TPa (r_s = 0.969). At higher pressures, hydrogen stabilizes in an ...ABCABC... planar structure that is remarkably similar to the ground state of lithium, which compresses to the face-centered cubic lattice beyond 5 TPa (r_s < 0.86). At this level of theory, our results provide a complete ab initio description of the atomic metallic structures of hydrogen, resolving one of the most fundamental and long outstanding issues concerning the structures of the elements.

cond-mat.mtrl-sci↗

Fundamental Behavior of Electric Field Enhancements in the Gaps Between Closely Spaced Nanostructures

We demonstrate that the electric field enhancement that occurs in a gap between two closely spaced nanostructures, such as metallic nanoparticles, is the result of a transverse electromagnetic waveguide mode. We derive an explicit semianalytic equation for the enhancement as a function of gap size, which we show has a universal qualitative behavior in that it applies irrespective of the material or geometry of the nanostructures and even in the presence of surface plasmons. Examples of perfect electrically conducting and Ag thin-wire antennas and a dimer of Ag spheres are presented and discussed.

cond-mat.mes-hall↗

Calculating Nonlocal Optical Properties of Structures with Arbitrary Shape

In a recent Letter [Phys. Rev. Lett. 103, 097403 (2009)], we outlined a computational method to calculate the optical properties of structures with a spatially nonlocal dielectric function. In this Article, we detail the full method, and verify it against analytical results for cylindrical nanowires. Then, as examples of our method, we calculate the optical properties of Au nanostructures in one, two, and three dimensions. We first calculate the transmission, reflection, and absorption spectra of thin films. Because of their simplicity, these systems demonstrate clearly the longitudinal (or volume) plasmons characteristic of nonlocal effects, which result in anomalous absorption and plasmon blueshifting. We then study the optical properties of spherical nanoparticles, which also exhibit such nonlocal effects. Finally, we compare the maximum and average electric field enhancements around nanowires of various shapes to local theory predictions. We demonstrate that when nonlocal effects are included, significant decreases in such properties can occur.

physics.optics↗