arXiv subjects

Jelena Vučković

Publications and source records attributed to Jelena Vučković.

At least 37 records · Page 2Linked to original sources

arXiv2023

Titanium:Sapphire-on-insulator for broadband tunable lasers and high-power amplifiers on chip

Titanium:Sapphire (Ti:Sa) lasers have been essential for advancing fundamental research and technological applications. Ti:Sa lasers are unmatched in bandwidth and tuning range, yet their use is severely restricted due to their large size, cost, and need for high optical pump powers. Here, we demonstrate a monocrystalline Ti:Sa-on-insulator (Ti:SaOI) photonics platform which enables dramatic miniaturization, cost-reduction, and scalability of Ti:Sa technology. First, through fabrication of low-loss whispering gallery mode resonators, we realize a Ti:Sa laser operating with an ultra-low lasing threshold of 290 $μ$W. Then, through orders-of-magnitude improvement in mode confinement in Ti:SaOI waveguides, we realize the first integrated solid-state (i.e., non-semiconductor) optical amplifier operating below 1 $μ$m, with an ultra-wide bandwidth of 700 - 950 nm and peak gain of 64 dB/cm. We demonstrate unprecedented 17 dB distortion-free amplification of picosecond pulses to up to 2.3 nJ pulse energy, corresponding to a peak power of 1.0 kW. Finally, we demonstrate the first tunable integrated Ti:Sa laser, featuring narrow linewidths and a 24.7 THz tuning range, which, for the first time, can be pumped with low-cost, miniature, off-the-shelf green laser diodes. This opens doors to new modalities of Ti:Sa lasers (now occupying a footprint less than 0.15 mm$^2$), such as massively-scalable Ti:Sa laser array systems for a variety of applications. As a proof-of-concept demonstration, we employ a Ti:SaOI laser array as the sole optical control for a cavity quantum electrodynamics experiment with artificial atoms in silicon carbide. This work is a key step towards the democratization of Ti:Sa technology through a three orders-of-magnitude reduction in cost and footprint, as well as the introduction of solid-state broadband amplification of sub-micron wavelength light.

physics.optics↗

arXiv2023

Quantum Photonic Circuits Integrated with Color Centers in Designer Nanodiamonds

Diamond has emerged as a leading host material for solid-state quantum emitters, quantum memories, and quantum sensors. However, the challenges in fabricating photonic devices in diamond have limited its potential for use in quantum technologies. While various hybrid integration approaches have been developed for coupling diamond color centers with photonic devices defined in a heterogeneous material, these methods suffer from either large insertion loss at the material interface or evanescent light-matter coupling. Here, we present a new technique that enables deterministic assembly of diamond color centers in a silicon nitride photonic circuit. Using this technique, we observe Purcell enhancement of silicon vacancy centers coupled to a silicon nitride ring resonator. Our hybrid integration approach has the potential for achieving the maximum possible light-matter interaction strength while maintaining low insertion loss, and paves the way towards scalable manufacturing of large-scale quantum photonic circuits integrated with high-quality quantum emitters and spins.

quant-ph↗

arXiv2023

An inverse-designed nanophotonic interface for excitons in atomically thin materials

Efficient nanophotonic devices are essential for applications in quantum networking, optical information processing, sensing, and nonlinear optics. Extensive research efforts have focused on integrating two-dimensional (2D) materials into photonic structures, but this integration is often limited by size and material quality. Here, we use hexagonal boron nitride (hBN), a benchmark choice for encapsulating atomically thin materials, as a waveguiding layer while simultaneously improving the optical quality of the embedded films. When combined with photonic inverse design, it becomes a complete nanophotonic platform to interface with optically active 2D materials. Grating couplers and low-loss waveguides provide optical interfacing and routing, tunable cavities provide a large exciton-photon coupling to transition metal dichalcogenides (TMD) monolayers through Purcell enhancement, and metasurfaces enable the efficient detection of TMD dark excitons. This work paves the way for advanced 2D-material nanophotonic structures for classical and quantum nonlinear optics.

physics.optics↗

arXiv2023

Bounds on Efficiency Metrics in Photonics

In this paper, we present a method for computing bounds for a variety of efficiency metrics in photonics, such as the focusing efficiency or the mode purity. We focus on the special case where the objective function can be written as the ratio of two quadratic functions of the field and show that there exists a simple semidefinite programming relaxation for this problem. We provide a numerical example of bounding the maximal mode conversion purity for a device of given size. This paper is accompanied by an open source Julia package for basic simulations and bounds.

math.OC↗

arXiv2023

Efficient Photonic Integration of Diamond Color Centers and Thin-Film Lithium Niobate

On-chip photonic quantum circuits with integrated quantum memories have the potential to radically progress hardware for quantum information processing. In particular, negatively charged group-IV color centers in diamond are promising candidates for quantum memories, as they combine long storage times with excellent optical emission properties and an optically-addressable spin state. However, as a material, diamond lacks many functionalities needed to realize scalable quantum systems. Thin-film lithium niobate (TFLN), in contrast, offers a number of useful photonic nonlinearities, including the electro-optic effect, piezoelectricity, and capabilities for periodically-poled quasi-phase matching. Here, we present highly efficient heterogeneous integration of diamond nanobeams containing negatively charged silicon-vacancy (SiV) centers with TFLN waveguides. We observe greater than 90\% transmission efficiency between the diamond nanobeam and TFLN waveguide on average across multiple measurements. By comparing saturation signal levels between confocal and integrated collection, we determine a $10$-fold increase in photon counts channeled into TFLN waveguides versus that into out-of-plane collection channels. Our results constitute a key step for creating scalable integrated quantum photonic circuits that leverage the advantages of both diamond and TFLN materials.

physics.optics↗

arXiv2023

Tunable vector beam decoder by inverse design for high-dimensional quantum key distribution with 3D polarized spatial modes

Spatial modes of light have become highly attractive to increase the dimension and, thereby, security and information capacity in quantum key distribution (QKD). So far, only transverse electric field components have been considered, while longitudinal polarization components have remained neglected. Here, we present an approach to include all three spatial dimensions of electric field oscillation in QKD by implementing our tunable, on-a-chip vector beam decoder (VBD). This inversely designed device pioneers the "preparation" and "measurement" of three-dimensionally polarized mutually unbiased basis states for high-dimensional (HD) QKD and paves the way for the integration of HD QKD with spatial modes in multifunctional on-a-chip photonics platforms.

physics.optics↗

arXiv2023

Inverse-designed Silicon Carbide Quantum and Nonlinear Photonics

Inverse design has revolutionized the field of photonics, enabling automated development of complex structures and geometries with unique functionalities unmatched by classical design. However, the use of inverse design in nonlinear photonics has been limited. In this work, we demonstrate quantum and classical nonlinear light generation in silicon carbide nanophotonic inverse-designed Fabry-Pérot cavities. We achieve ultra-low reflector losses while targeting a pre-specified anomalous dispersion to reach optical parametric oscillation. By controlling dispersion through inverse design, we target a second-order phase-matching condition to realize second- and third-order nonlinear light generation in our devices, thereby extending stimulated parametric processes into the visible spectrum. This first realization of computational optimization for nonlinear light generation highlights the power of inverse design for nonlinear optics, in particular when combined with highly nonlinear materials such as silicon carbide.

physics.optics↗

arXiv2022

Platform-agnostic waveguide integration of high-speed photodetectors with evaporated tellurium thin films

Many attractive photonics platforms still lack integrated photodetectors due to inherent material incompatibilities and lack of process scalability, preventing their widespread deployment. Here we address the problem of scalably integrating photodetectors in a photonic platform-independent manner. Using a thermal evaporation and deposition technique developed for nanoelectronics, we show that tellurium (Te), a quasi-2D semi-conductive element, can be evaporated at low temperature directly onto photonic chips to form air-stable, high-responsivity, high-speed, ultrawide-band photodetectors. We demonstrate detection at visible, telecom, and mid-infrared wavelengths, a bandwidth of more than 40 GHz, and platform-independent scalable integration with photonic structures in silicon, silicon nitride and lithium niobate.

physics.optics↗

arXiv2022

Universal visible emitters in nanoscale integrated photonics

Visible wavelengths of light control the quantum matter of atoms and molecules and are foundational for quantum technologies, including computers, sensors, and clocks. The development of visible integrated photonics opens the possibility for scalable circuits with complex functionalities, advancing both the scientific and technological frontiers. We experimentally demonstrate an inverse design approach based on superposition of guided-mode sources, allowing the generation and full control of free-space radiation directly from within a single 150 nm layer Ta2O5, showing low loss across visible and near-infrared spectra. We generate diverging circularly-polarized beams at the challenging 461 nm wavelength that can be directly used for magneto-optical traps of strontium atoms, constituting a fundamental building block for a range of atomic-physics-based quantum technologies. Our generated topological vortex beams and spatially-varying polarization emitters could open unexplored light-matter interaction pathways, enabling a broad new photonic-atomic paradigm. Our platform highlights the generalizability of nanoscale devices for visible-laser emission and will be critical for scaling quantum technologies.

physics.optics↗

arXiv2022

Integrated Passive Nonlinear Optical Isolators

Fiber and bulk-optical isolators are widely used to stabilize laser cavities by preventing unwanted feedback. However, their integrated counterparts have been slow to be adopted. While several strategies for on-chip optical isolation have been realized, these rely on either integration of magneto-optic materials or high frequency modulation with acousto-optic or electro-optic modulators. Here, we demonstrate an integrated approach for passively isolating a continuous wave laser using the intrinsically non-reciprocal Kerr nonlinearity in ring resonators. Using silicon nitride as a model platform, we achieve single ring isolation of 17-23dB with 1.8-5.5dB insertion loss, and a cascaded ring isolation of 35dB with 5dB insertion loss. Employing these devices, we demonstrate hybrid integration and isolation with a semi-conductor laser chip.

physics.optics↗

arXiv2022

A Quantum Optical Microphone in the Audio Band

The ability to perform high-precision optical measurements is paramount to science and engineering. Laser interferometry enables interaction-free sensing with a precision ultimately limited by shot noise. Quantum optical sensors can surpass this limit, but single- or multi-photon schemes are challenged by low experimental sampling rates, while squeezed-light approaches require complex optical setups and sophisticated time gating. Here, we introduce a simple method that infers optical phase shifts through standard intensity measurements while still maintaining the quantum advantage in the measurement precision. Capitalising on the robustness and high sampling rates of our device, we implement a quantum optical microphone in the audio band. Its performance is benchmarked against a classical laser microphone in a standardised medically-approved speech recognition test on 45 subjects. We find that quantum-recorded words improve the speech recognition threshold by $-0.57\, \text{dB}_{\text{SPL}}$, thus making the quantum advantage audible. Not only do these results open the door towards applications in quantum nonlinear interferometry, but they also show that quantum phenomena can be experienced by humans.

quant-ph↗

arXiv2022

Creating boundaries along a synthetic frequency dimension

Synthetic dimensions have garnered widespread interest for implementing high dimensional classical and quantum dynamics on lower dimensional geometries. Synthetic frequency dimensions, in particular, have been used to experimentally realize a plethora of bulk physics effects, such as effective gauge potentials, nontrivial Hermitian as well as non-Hermitian topology, spin-momentum locking, complex long-range coupling, unidirectional frequency conversion, and four-dimensional lattices. However, in synthetic frequency dimensions there has not been any demonstration of boundary effects which are of paramount importance in topological physics due to the bulk edge correspondence, since systems exhibiting synthetic frequency dimensions do not support well-defined sharp boundaries. Here we theoretically elucidate a method to construct boundaries in the synthetic frequency dimension of dynamically modulated ring resonators by strongly coupling it to an auxiliary ring, and provide an experimental demonstration of this method. We experimentally explore various physics effects associated with the creation of such boundaries in the synthetic frequency dimension, including confinement of the spectrum of light, the discretization of the band structure, and the interaction of such boundaries with the topologically protected one-way chiral modes in a quantum Hall ladder. The incorporation of boundaries allows us to observe topologically robust transport of light along the frequency axis, which shows that the frequency of light can be controlled through topological concepts. Our demonstration of such sharp boundaries fundamentally expands the capability of exploring topological physics, and is also of importance for other applications such as classical and quantum information processing in synthetic frequency dimensions.

quant-ph↗

arXiv2022

Simulation of large-area metasurfaces with a distributed transition matrix method

Inverse design of large-area metasurfaces can potentially exploit the full parameter space that such devices offer and achieve highly efficient multifunctional flat optical elements. However, since practically useful flat optics elements are large in the linear dimension, an accurate simulation of their scattering properties is challenging. Here, we demonstrate a method to compute accurate simulations and gradients of large-area metasurfaces. Our approach relies on two key ingredients - a simulation distribution strategy that allows a linear reduction in the simulation time with number of compute (GPU) nodes and an efficient single-node computation using the Transition-matrix (T-matrix) method. We demonstrate ability to perform a distributed simulation of large-area, while accurately accounting for scatterer-scatterer interactions significantly beyond the locally periodic approximation, and efficiently compute gradients with respect to the metasurface design parameters. This scalable and accurate metasurface simulation method opens the door to gradient-based optimization of full large-area metasurfaces.

physics.optics↗

arXiv2022

Gradient-Based Optimization of Optical Vortex Beam Emitters

Vortex beams are stable solutions of Maxwell's equations that carry phase singularities and orbital angular momentum, unique properties that give rise to many applications in the basic sciences, optical communications, and quantum technologies. Scalable integration and fabrication of vortex beam emitters will allow these applications to flourish and enable new applications not possible with traditional optics. Here we present a general framework to generate integrated vortex beam emitters using photonic inverse design. We experimentally demonstrate generation of vortex beams with angular momentum spanning -3$\hbar$ to 3$\hbar$. We show the generality of this design procedure by designing a vortex beam multiplexer capable of exciting a custom vortex beam fiber. Finally, we produce foundry-fabricated beam emitters with wide-bandwidths and high-efficiencies that take advantage of a multi-layer heterogeneous integration.

physics.optics↗

arXiv2022

Optical superradiance of a pair of color centers in an integrated silicon-carbide-on-insulator microresonator

An outstanding challenge for color center-based quantum information processing technologies is the integration of optically-coherent emitters into scalable thin-film photonics. Here, we report on the integration of near-transform-limited silicon vacancy (V$_{\text{Si}}$) defects into microdisk resonators fabricated in a CMOS-compatible 4H-Silicon Carbide-on-Insulator platform. We demonstrate a single-emitter cooperativity of up to 0.8 as well as optical superradiance from a pair of color centers coupled to the same cavity mode. We investigate the effect of multimode interference on the photon scattering dynamics from this multi-emitter cavity quantum electrodynamics system. These results are crucial for the development of quantum networks in silicon carbide and bridge the classical-quantum photonics gap by uniting optically-coherent spin defects with wafer-scalable, state-of-the-art photonics.

quant-ph↗

arXiv2022

Superradiance in dynamically modulated Tavis-Cumming model with spectral disorder

Superradiance is the enhanced emission of photons from quantum emitters collectively coupling to the same optical mode. However, disorder in the resonant frequencies of the quantum emitters can perturb this effect. In this paper, we study the interplay between superradiance and spectral disorder in a dynamically modulated Tavis-Cummings model. Through numerical simulations and analytical calculations, we show that the effective cooperativity of the superradiant mode, which is always formed over an extensive number of emitters, can be multiplicatively enhanced with a quantum control protocol modulating the resonant frequency of the optical mode. Our results are relevant to experimental demonstration of superradiant effects in solid-state quantum optical systems, wherein the spectral disorder is a significant technological impediment towards achieving photon-mediated emitter-emitter couplings.

quant-ph↗

arXiv2021

Inverse-designed multi-dimensional silicon photonic transmitters

Modern microelectronic processors have migrated towards parallel computing architectures with many-core processors. However, such expansion comes with diminishing returns exacted by the high cost of data movement between individual processors. The use of optical interconnects has burgeoned as a promising technology that can address the limits of this data transfer. While recent pushes to enhance optical communication have focused on developing wavelength-division multiplexing technology, this approach will eventually saturate the usable bandwidth, and new dimensions of data transfer will be paramount to fulfill the ever-growing need for speed. Here we demonstrate an integrated intra- and inter-chip multi-dimensional communication scheme enabled by photonic inverse design. Using inverse-designed mode-division multiplexers, we combine wavelength- and mode- multiplexing and send massively parallel data through nano-photonic waveguides and optical fibres. Crucially, as we take advantage of an orthogonal optical basis, our approach is inherently scalable to a multiplicative enhancement over the current state of the art.

physics.app-ph↗

arXiv2021

Augmenting On-Chip Microresonator through Photonic Inverse Design

Recent advances in the design and fabrication of on-chip optical microresonators has greatly expanded their applications in photonics, enabling metrology, communications, and on-chip lasers. Designs for these applications require fine control of dispersion, bandwidth and high optical quality factors. Co-engineering these figures of merit remains a significant technological challenge due to design strategies being largely limited to analytical tuning of cross-sectional geometry. Here, we show that photonic inverse-design facilitates and expands the functionality of on-chip microresonators; theoretically and experimentally demonstrating flexible dispersion engineering, quality factor beyond 2 million on the silicon-on-insulator platform with single mode operation, and selective wavelength-band operation.

physics.optics↗