Searcharxiv⌕ Search

arXiv subjects

Jelmer J. Renema

Publications and source records attributed to Jelmer J. Renema.

30 records · Page 2Linked to original sources

Classically simulating near-term partially-distinguishable and lossy boson sampling

Boson Sampling is the problem of sampling from the same distribution as indistinguishable single photons at the output of a linear optical interferometer. It is an example of a non-universal quantum computation which is believed to be feasible in the near term and cannot be simulated on a classical machine. Like all purported demonstrations of "quantum supremacy", this motivates optimizing classical simulation schemes for a realistic model of the problem, in this case Boson Sampling when the implementations experience lost or distinguishable photons. Although current simulation schemes for sufficiently imperfect boson sampling are classically efficient, in principle the polynomial runtime can be infeasibly large. In this work, we develop a scheme for classical simulation of Boson Sampling under uniform distinguishability and loss, based on the idea of sampling from distributions where at most k photons are indistinguishable. We show that asymptotically this scheme can provide a polynomial improvement in the runtime compared to classically simulating idealised Boson Sampling. More significantly, we show that in the regime considered experimentally relevant, our approach gives an substantial improvement in runtime over other classical simulation approaches.

quant-ph↗

Tensor network states in time-bin quantum optics

The current shift in the quantum optics community towards large-size experiments -- with many modes and photons -- necessitates new classical simulation techniques that go beyond the usual phase space formulation of quantum mechanics. To address this pressing demand we formulate linear quantum optics in the language of tensor network states. As a toy model, we extensively analyze the quantum and classical correlations of time-bin interference in a single fiber loop. We then generalize our results to more complex time-bin quantum setups and identify different classes of architectures for high-complexity and low-overhead boson sampling experiments.

quant-ph↗

Modular Linear Optical Circuits

We propose and demonstrate a modular architecture for reconfigurable on-chip linear-optical circuits. Each module contains 10 independent phase-controlled Mach-Zehnder interferometers; several such modules can be connected to each other to build large reconfigurable interferometers. With this architecture, large interferometers are easier to build and characterize than with traditional, bespoke, monolithic designs. We demonstrate our approach by fabricating three modules in the form of UV-written silica-on-silicon chips. We characterize these chips, connect them to each other, and implement a wide range of linear optical transformations. We envisage that this architecture will enable many future experiments in quantum optics.

quant-ph↗

Approximating Vibronic Spectroscopy with Imperfect Quantum Optics

We study the impact of experimental imperfections on a recently proposed protocol for performing quantum simulations of vibronic spectroscopy. Specifically, we propose a method for quantifying the impact of these imperfections, optimizing an experiment to account for them, and benchmarking the results against a classical simulation method. We illustrate our findings using a proof of principle experimental simulation of part of the vibronic spectrum of tropolone. Our findings will inform the design of future experiments aiming to simulate the spectra of large molecules beyond the reach of current classical computers.

quant-ph↗

Efficient algorithm for boson sampling with partially distinguishable photons

We demonstrate how boson sampling with photons of partial distinguishability can be expressed in terms of interference of fewer photons. We use this observation to propose a classical algorithm to simulate the output of a boson sampler fed with photons of partial distinguishability. We find conditions for which this algorithm is efficient, which gives a lower limit on the required indistinguishability to demonstrate a quantum advantage. Under these conditions, adding more photons only polynomially increases the computational cost to simulate a boson sampling experiment.

quant-ph↗

Gaussian Optical Ising Machines

It has recently been shown that optical parametric oscillator (OPO) Ising machines, consisting of coupled optical pulses circulating in a cavity with parametric gain, can be used to probabilistically find low-energy states of Ising spin systems. In this work, we study optical Ising machines that operate under simplified Gaussian dynamics. We show that these dynamics are sufficient for reaching probabilities of success comparable to previous work. Based on this result, we propose modified optical Ising machines with simpler designs that do not use parametric gain yet achieve similar performance, thus suggesting a route to building much larger systems.

quant-ph↗

Design of NbN superconducting nanowire single photon detectors with enhanced infrared photon detection efficiency

We propose an optimized design for nanowire superconducting single photon detectors, using the recently discovered position dependent detection efficiency in these devices. This knowledge allows an optimized the design of meandering wire NbN detectors by altering the field distribution across the wire. In order to calculate the response of the detectors with different geometries, we use a monotonic local detection efficiency from a nanowire and optical absorption distribution via finite-different-time-domain simulations. The calculations predict a trade-off between average absorption and the edge effect leading to a predicted optimal wire width close to 100 nm for 1550 nm wavelength, which drops to 50 nm wire width for 600 nm wavelength. The absorption at the edges can be enhanced by depositing a silicon nanowire on top of the superconducting nanowire, which improves both the total absorption efficiency as well as the internal detection efficiency of meandering wire structures.

physics.ins-det↗

Implementing random unitaries in an imperfect photonic network

We numerically investigate the implementation of Haar-random unitarity transformations and Fourier transformations in photonic devices consisting of beam splitters and phase shifters, which are used for integrated photonics implementations of boson sampling. The distribution of reflectivities required to implement an arbitrary unitary transformation is skewed towards low values, and this skew becomes stronger the larger the number of modes. A realistic implementation using Mach-Zehnder interferometers is incapable of doing this perfectly and thus has limited fidelity. We show that numerical optimisation and adding extra beam splitters to the network can help to restore fidelity.

quant-ph↗

Experimental investigation of the detection mechanism in WSi nanowire superconducting single photon detectors

We use quantum detector tomography to investigate the detection mechanism in WSi nanowire superconducting single photon detectors (SSPDs). To this purpose, we fabricated a 250nm wide and 250nm long WSi nanowire and measured its response to impinging photons with wavelengths ranging from $λ$ = 900 nm to $λ$ = 1650 nm. Tomographic measurements show that the detector response depends on the total excitation energy only. Moreover, for energies Et > 0.8eV the current energy relation is linear, similar to what was observed in NbN nanowires, whereas the current-energy relation deviates from linear behaviour for total energies below 0.8eV.

cond-mat.mes-hall↗

Position-Dependent Local Detection Efficiency in a Nanowire Superconducting Single-Photon Detector

We probe the local detection efficiency in a nanowire superconducting single-photon detector along the cross-section of the wire with a spatial resolution of 10 nm. We experimentally find a strong variation in the local detection efficiency of the device. We demonstrate that this effect explains previously observed variations in NbN detector efficiency as function of device geometry.

cond-mat.supr-con↗

Tomography and state reconstruction with superconducting single-photon detectors

We perform quantum state reconstruction of coherent and thermal states with a detector which has an enhanced multiphoton response. The detector is based on superconducting nanowires, where the bias current sets the dependence of the click probability on the photon number; this bias current is used as tuning parameter in the state reconstruction. The nonlinear response makes our nanowire-based detector superior to the linear detectors that are conventionally used for quantum state reconstruction.

quant-ph↗

Entanglement-assisted atomic clock beyond the projection noise limit

We use a quantum non-demolition measurement to generate a spin squeezed state and to create entanglement in a cloud of 10^5 cold cesium atoms, and for the first time operate an atomic clock improved by spin squeezing beyond the projection noise limit in a proof-of-principle experiment. For a clock-interrogation time of 10 μ\s the experiments show an improvement of 1.1 dB in the signal-to-noise ratio, compared to the atomic projection noise limit.

quant-ph↗