arXiv subjects

Jennifer E. Hoffman

Publications and source records attributed to Jennifer E. Hoffman.

49 records · Page 3Linked to original sources

arXiv2015

Revealing the Empty-State Electronic Structure of Single-Unit-Cell FeSe/SrTiO$_{3}$

We use scanning tunneling spectroscopy to investigate the filled and empty electronic states of superconducting single-unit-cell FeSe deposited on SrTiO$_3$(001). We map the momentum-space band structure by combining quasiparticle interference imaging with decay length spectroscopy. In addition to quantifying the filled-state bands, we discover a $Γ$-centered electron pocket 75 meV above the Fermi energy. Our density functional theory calculations show the orbital nature of empty states at $Γ$ and suggest that the Se height is a key tuning parameter of their energies, with broad implications for electronic properties.

cond-mat.supr-con↗

arXiv2015

Single Vortex Pinning and Penetration Depth in Superconducting NdFeAsO$_{1-x}$F$_x$

We use a magnetic force microscope (MFM) to investigate single vortex pinning and penetration depth in NdFeAsO$_{1-x}$F$_x$, one of the highest-$T_c$ iron-based superconductors. In fields up to 20 Gauss, we observe a disordered vortex arrangement, implying that the pinning forces are stronger than the vortex-vortex interactions. We measure the typical force to depin a single vortex, $F_{\mathrm{depin}} \simeq 4.5$ pN, corresponding to a critical current up to $J_c \simeq 7 \times 10^5$ A/cm$^2$. Furthermore, our MFM measurements allow the first local and absolute determination of the superconducting in-plane penetration depth in NdFeAsO$_{1-x}$F$_x$, $λ_{ab}=320 \pm 60$ nm, which is larger than previous bulk measurements.

cond-mat.supr-con↗

arXiv2015

Spin-Polarized Quantum Well States on Bi$_{2-x}$Fe$_x$Se$_3$

Low temperature scanning tunneling microscopy is used to image the doped topological insulator Bi$_{2-x}$Fe$_x$Se$_3$. Interstitial Fe defects allow the detection of quasiparticle interference (QPI), and the reconstruction of the empty state band structure. Quantitative comparison between measured data and density functional theory calculations reveals the unexpected coexistence of quantum well states (QWS) with topological surface states (TSS) on the atomically clean surface of Bi$_{2-x}$Fe$_x$Se$_3$. Spectroscopic measurements quantify the breakdown of linear dispersion due to hexagonal warping. Nonetheless, both QWS and TSS remain spin-polarized and protected from backscattering to almost 1 eV above the Dirac point, suggesting their utility for spin-based applications.

cond-mat.mtrl-sci↗

arXiv2014

Nanoscale interplay of strain and doping in a high-temperature superconductor

The highest temperature superconductors are electronically inhomogeneous at the nanoscale, suggesting the existence of a local variable which could be harnessed to enhance the superconducting pairing. Here we report the relationship between local doping and local strain in the cuprate superconductor Bi$_2$Sr$_2$CaCu$_2$O$_{8+x}$. We use scanning tunneling microscopy to discover that the crucial oxygen dopants are periodically distributed, in correlation with local strain. Our picoscale investigation of the intra-unit-cell positions of all oxygen dopants provides essential structural input for a complete microscopic theory.

cond-mat.str-el↗

arXiv2013

Imaging the Nanoscale Band Structure of Topological Sb

Many promising building blocks of future electronic technology - including non-stoichiometric compounds, strongly correlated oxides, and strained or patterned films - are inhomogeneous on the nanometer length scale. Exploiting the inhomogeneity of such materials to design next-generation nanodevices requires a band structure probe with nanoscale spatial resolution. To address this demand, we report the first simultaneous observation and quantitative reconciliation of two candidate probes - Landau level spectroscopy and quasiparticle interference imaging - which we employ here to reconstruct the multi-component surface state band structure of the topological semimetal antimony(Sb). We thus establish the technique of band structure tunneling microscopy (BSTM), whose unique advantages include nanoscale access to non-rigid band structure deformation, empty state dispersion, and magnetic field dependent states. We use BSTM to elucidate the relationship between bulk conductivity and surface state robustness in topological materials, and to quantify essential metrics for spintronics applications.

cond-mat.mes-hall↗

arXiv2013

Imaging the Kondo Insulating Gap on SmB6

Topological insulators host spin-polarized surface states which robustly span the band gap and hold promise for novel applications. Recent theoretical predictions have suggested that topologically protected surface states may similarly span the hybridization gap in some strongly correlated heavy fermion materials, particularly SmB6. However, the process by which the Sm 4f electrons hybridize with the 5d electrons on the surface of SmB6, and the expected Fermi-level gap in the density of states out of which the predicted topological surface states must arise, have not been directly measured. We use scanning tunneling microscopy to conduct the first atomic resolution spectroscopic study of the cleaved surface of SmB6, and to reveal a robust hybridization gap which universally spans the Fermi level on four distinct surface morphologies despite shifts in the f band energy. Using a cotunneling model, we separate the density of states of the hybridized bands from which the predicted topological surface states must be disentangled. On all surfaces we observe residual spectral weight spanning the hybridization gap down to the lowest T, which is consistent with a topological surface state.

cond-mat.str-el↗

arXiv2013

Nanoscale Surface Element Identification and Dopant Homogeneity in the High-$T_c$ Superconductor Pr$_x$Ca$_{1-x}$Fe$_2$As$_2$

We use scanning tunneling microscopy to determine the surface structure and dopant distribution in Pr$_x$Ca$_{1-x}$Fe$_2$As$_2$, the highest-$T_c$ member of the 122 family of iron-based superconductors. We identify the cleaved surface termination by mapping the local tunneling barrier height, related to the work function. We image the individual Pr dopants responsible for superconductivity, and show that they do not cluster, but in fact repel each other at short length scales. We therefore suggest that the low volume fraction high-$T_c$ superconducting phase is unlikely to originate from Pr inhomogeneity.

cond-mat.supr-con↗

arXiv2013

Pairing insights in iron-based superconductors from scanning tunneling microscopy

Scanning tunneling microscopy (STM) has made tremendous progress in the study and understanding of both classical and unconventional superconductors. This has motivated a rapidly growing effort to apply the same techniques to the iron-based high-Tc superconductors since their discovery in 2008. Five years have brought exciting advances in imaging and spectroscopic investigation of this new class of materials. In this review, we focus on several recent STM contributions to the identification of the gap symmetry and pairing glue. We highlight the unique capabilities and challenges still ahead for STM studies of iron-based superconductors.

cond-mat.supr-con↗

arXiv2012

A quantum phase transition from triangular to stripe charge order in NbSe$_{2}$

The competition between proximate electronic phases produces a complex phenomenology in strongly correlated systems. In particular, fluctuations associated with periodic charge or spin modulations, known as density waves, may lead to exotic superconductivity in several correlated materials. However, density waves have been difficult to isolate in the presence of chemical disorder, and the suspected causal link between competing density wave orders and high temperature superconductivity is not understood. Here we use scanning tunneling microscopy to image a previously unknown unidirectional (stripe) charge density wave (CDW) smoothly interfacing with the familiar tri-directional (triangular) CDW on the surface of the stoichiometric superconductor NbSe$_2$. Our low temperature measurements rule out thermal fluctuations, and point to local strain as the tuning parameter for this quantum phase transition. We use this discovery to resolve two longstanding debates about the anomalous spectroscopic gap and the role of Fermi surface nesting in the CDW phase of NbSe$_2$. Our results highlight the importance of local strain in governing phase transitions and competing phenomena, and suggest a new direction of inquiry for resolving similarly longstanding debates in cuprate superconductors and other strongly correlated materials.

cond-mat.str-el↗

arXiv2012

Suppression of Superconductivity by Twin Boundaries in FeSe

Low-temperature scanning tunneling microscopy and spectroscopy are employed to investigate twin boundaries in stoichiometric FeSe films grown by molecular beam epitaxy. Twin boundaries can be unambiguously identified by imaging the 90° change in the orientation of local electronic dimers from Fe site impurities on either side. Twin boundaries run at approximately 45° to the Fe-Fe bond directions, and noticeably suppress the superconducting gap, in contrast with the recent experimental and theoretical findings in other iron pnictides. Furthermore, vortices appear to accumulate on twin boundaries, consistent with the degraded superconductivity there. The variation in superconductivity is likely caused by the increased Se height in the vicinity of twin boundaries, providing the first local evidence for the importance of this height to the mechanism of superconductivity.

cond-mat.supr-con↗

arXiv2012

STM imaging of symmetry-breaking structural distortion in the Bi-based cuprate superconductors

A complicating factor in unraveling the theory of high-temperature (high-Tc) superconductivity is the presence of a "pseudogap" in the density of states, whose origin has been debated since its discovery [1]. Some believe the pseudogap is a broken symmetry state distinct from superconductivity [2-4], while others believe it arises from short-range correlations without symmetry breaking [5,6]. A number of broken symmetries have been imaged and identified with the pseudogap state [7,8], but it remains crucial to disentangle any electronic symmetry breaking from pre-existing structural symmetry of the crystal. We use scanning tunneling microscopy (STM) to observe an orthorhombic structural distortion across the cuprate superconducting Bi2Sr2Can-1CunO2n+4+x (BSCCO) family tree, which breaks two-dimensional inversion symmetry in the surface BiO layer. Although this inversion symmetry breaking structure can impact electronic measurements, we show from its insensitivity to temperature, magnetic field, and doping, that it cannot be the long-sought pseudogap state. To detect this picometer-scale variation in lattice structure, we have implemented a new algorithm which will serve as a powerful tool in the search for broken symmetry electronic states in cuprates, as well as in other materials.

cond-mat.supr-con↗

arXiv2012

Spectroscopic scanning tunneling microscopy insights into Fe-based superconductors

In the first three years since the discovery of Fe-based high Tc superconductors, scanning tunneling microscopy (STM) and spectroscopy have shed light on three important questions. First, STM has demonstrated the complexity of the pairing symmetry in Fe-based materials. Phase-sensitive quasiparticle interference (QPI) imaging and low temperature spectroscopy have shown that the pairing order parameter varies from nodal to nodeless s\pm within a single family, FeTe1-xSex. Second, STM has imaged C4 -> C2 symmetry breaking in the electronic states of both parent and superconducting materials. As a local probe, STM is in a strong position to understand the interactions between these broken symmetry states and superconductivity. Finally, STM has been used to image the vortex state, giving insights into the technical problem of vortex pinning, and the fundamental problem of the competing states introduced when superconductivity is locally quenched by a magnetic field. Here we give a pedagogical introduction to STM and QPI imaging, discuss the specific challenges associated with extracting bulk properties from the study of surfaces, and report on progress made in understanding Fe-based superconductors using STM techniques.

cond-mat.supr-con↗

arXiv2008

Mechanics of Individual, Isolated Vortices in a Cuprate Superconductor

Superconductors often contain quantized microscopic whirlpools of electrons, called vortices, that can be modeled as one-dimensional elastic objects. Vortices are a diverse playground for condensed matter because of the interplay between thermal fluctuations, vortex-vortex interactions, and the interaction of the vortex core with the three-dimensional disorder landscape. While vortex matter has been studied extensively, the static and dynamic properties of an individual vortex have not. Here we employ magnetic force microscopy (MFM) to image and manipulate individual vortices in detwinned, single crystal YBa2Cu3O6.991 (YBCO), directly measuring the interaction of a moving vortex with the local disorder potential. We find an unexpected and dramatic enhancement of the response of a vortex to pulling when we wiggle it transversely. In addition, we find enhanced vortex pinning anisotropy that suggests clustering of oxygen vacancies in our sample and demonstrates the power of MFM to probe vortex structure and microscopic defects that cause pinning.

cond-mat.supr-con↗