SearcharxivSearch

arXiv subjects

Jenny List

Publications and source records attributed to Jenny List.

At least 19 recordsLinked to original sources

The SUSY reach of Higgs Factories in the most challenging scenario: scalar $\tau$-leptons with lowest cross section and small mass differences

The direct pair-production of the $\tilde{\tau}$, is one of the most interesting channels to search for SUSY in: the $\tilde{\tau}$ is likely to be the lightest of the scalar leptons, and the signature of $\tilde{\tau}$ pair production is one of the experimentally most difficult ones, making it the ``worst'' possible scenario for SUSY searches. The current limit on $\tilde{\tau}$ production in the general MSSM comes from LEP. Limits obtained at LHC do extend to higher masses, but they are only valid under strong assumptions. Future $e^+e^-$ colliders will be powerful for SUSY searches, offering advantages with respect to previous $e^+e^-$ colliders as well as to hadron machines. In order to quantify their capabilities, the ``worst-case'' scenario for $\tilde{\tau}$ searches has been studied, taking into account the effect of the $\tilde{\tau}$ mixing on both $\tilde{\tau}$ production cross section and on detection efficiency. To evaluate the latter, the ILD detector concept, originally developed for the International Linear Collider (ILC), and the ILC beam conditions at a centre-of-mass energy of $500$\,GeV have been used for detailed simulations, including for the first time the effect of bunch-crossings containing no hard $e^+e^-$ interaction, but only low-$\it{P_{T}}$ hadrons from $\gamma\gamma$ interactions and $e^+e^-$ pairs from beamstrahlung. Still, the obtained exclusion and discovery reaches extend nearly up to the kinematic limit even in the worst-case scenario. This remains true also when the $\tilde{\tau}$ and the lightest SUSY particle are quite close in mass. The results of the detailed study are extrapolated to centre-of-mass energies, integrated luminosities and beam polarisations of other proposed Higgs factory projects and discussed in view of their respective experimental environments, in particular addressing the case of FCCee.

hep-ph

Higgs Self-Coupling Measurement at a Linear Collider at 550 GeV

The Higgs mechanism is essential for the success of the Standard Model (SM) and can be experimentally verified with the determination of the Higgs self-coupling. As the simplest model of a Higgs potential, the SM provides a clear prediction of the Higgs self-coupling in terms of the Higgs boson mass and the vacuum expectation value. Any deviations would indicate physics beyond the SM and help guide extended Higgs models. At large enough centre-of-mass energies, double-Higgs production provides tree-level sensitivity to the trilinear Higgs self-coupling. At 550 GeV the leading production mode in $e^+e^-$ comes from di-Higgs strahlung with a small contribution from $WW$-fusion. The most up-to-date ILD projections are extrapolated based on a full simulation analysis from 2014 by incorporating expected improvements in flavour tagging and kinematic reconstruction for event selection, and are presented in this contribution together with the ongoing re-analysis using fast SGV (Simulation a Grande Vitesse) simulations of the ILD detector concept on a full SM background including the aforementioned state-of-the-art reconstruction and analysis tools.

hep-ex

Assessing uncertainties in the determination of the trilinear Higgs self-coupling from single-Higgs observables

Circular $e^{+}e^{-}$ colliders operating at energies below the di-Higgs production threshold can provide information on the trilinear Higgs self-coupling $\lambda_{hhh}$ via its loop contributions to single Higgs production processes and electroweak precision observables. We investigate how well a non-SM value of $\lambda_{hhh}$ can be determined indirectly via its loop contributions within a global EFT fit. Using an inert doublet extension of the SM Higgs sector as an example for a scenario of physics beyond the SM that could be realised in nature, we find that theoretical uncertainties related to the treatment of loop contributions and the truncation of the EFT expansion, which are usually neglected, play an important role in determining the sensitivity to $\lambda_{hhh}$ in a global fit. The results obtained from such an indirect determination of $\lambda_{hhh}$ without taking these additional uncertainties into account would be too optimistic, leading to an artificially high resulting precision for $\lambda_{hhh}$. They could therefore be misleading in the quest to precisely identify the underlying physics of electroweak symmetry breaking.

hep-ph

Update of the Higgs Self-coupling Projections from Di-Higgs Production in Detailed Simulation of the ILD Concept

This contribution summarizes the update of the projections for the determination of the tri-linear Higgs self-coupling from di-Higgs production at future $e^+e^-$ colliders. In particular, we will present an update of the analysis of $ZHH$ production at 500 GeV in detailed simulations of the ILD concept, covering the $HH\rightarrow b\bar{b}b\bar{b}$ and $Z\rightarrow q\bar{q} / e^+e^- / \mu^+\mu^- /\nu\bar{\nu}$ channels. Based on the experience of previous analyses, we will extrapolate these to contain some of the remaining decay modes, e.g. $HH\rightarrow b\bar{b} WW^*$ or $Z\rightarrow \tau^+\tau^-$, as well as the contribution from the $WW$ fusion production mode. We will study the dependency of the results on the centre-of-mass energy (in particular discussing 550 GeV and 1 TeV) as well as on the value of the trilinear coupling realised in nature.

hep-ex

A dump leakage calorimeter to measure the flux of high-energy electrons and photons

We developed a novel apparatus based on a lead-glass calorimeter that can measure the flux of high-energy electrons or photons. Our detector uses the electromagnetic shower leakage from the beam dump, where the particles are disposed of at the beamline's end. A prototype of such a calorimeter was set up at the FLASHForward experiment at DESY. We show that it can measure the electron bunch charge with a typical precision on the order of 10% and an accuracy at the few-percent level. Additionally, it is capable of determining the beam's position with a precision on the order of tens of micrometers. Finally, we demonstrate applicability to high-energy photons.

hep-ex

A High-Flux Electron Detector System to Measure Non-linear Compton Scattering at LUXE

Recently, advancements in high-intensity laser technology have enabled the exploration of non-perturbative Quantum Electrodynamics (QED) in strong-field regimes. Notable aspects include non-linear Compton scattering and Breit-Wheeler pair production, observable when colliding high-intensity laser pulses and relativistic electron beams. The LUXE experiment at DESY and the E-320 experiment at SLAC aim to study these phenomena by measuring the created high-flux Compton electrons and photons. We propose a novel detector system featuring a segmented gas-filled Cherenkov detector with a scintillator screen and camera setup, designed to efficiently detect high-flux Compton electrons. Preliminary results from E-320 measurement campaigns demonstrate methods for reconstructing electron energy spectra, aiming to reveal crucial features of non-perturbative QED.

physics.ins-det

Design Initiative for a 10 TeV pCM Wakefield Collider

This document outlines a community-driven Design Study for a 10 TeV pCM Wakefield Accelerator Collider. The 2020 ESPP Report emphasized the need for Advanced Accelerator R\&D, and the 2023 P5 Report calls for the ``delivery of an end-to-end design concept, including cost scales, with self-consistent parameters throughout." This Design Study leverages recent experimental and theoretical progress resulting from a global R\&D program in order to deliver a unified, 10 TeV Wakefield Collider concept. Wakefield Accelerators provide ultra-high accelerating gradients which enables an upgrade path that will extend the reach of Linear Colliders beyond the electroweak scale. Here, we describe the organization of the Design Study including timeline and deliverables, and we detail the requirements and challenges on the path to a 10 TeV Wakefield Collider.

physics.acc-ph

HALHF: a hybrid, asymmetric, linear Higgs factory using plasma- and RF-based acceleration

HALHF is a hybrid linear collider that uses electron-driven plasma-wakefield acceleration to accelerate electrons to high energy while using radio-frequency cavity technology to accelerate positrons. The most cost-effective solution collides low-energy positrons with high-energy electrons, producing a boost to the final state in the electron direction with $\gamma= 1.67$. The current HALHF baseline design produces a luminosity comparable to that of the baseline ILC but with a greatly reduced construction and carbon footprint and hence much lower cost than the mature linear-collider designs ILC and CLIC. Costs for HALHF are evaluated, together with that for the approximate 15-year R\&D programme necessary to realise HALHF. Time scales and cost for the R\&D are estimated. Upgrade paths for HALHF technology from a 250~GeV Higgs factory, through 380 and 550~GeV, up to 10~TeV are sketched.

physics.acc-ph

Proceedings of the Erice Workshop: A new baseline for the hybrid, asymmetric, linear Higgs factory HALHF

The HALHF collaboration has discussed a new baseline for the project, taking into account comments from the accelerator community on various aspects of the original design. In particular, these concerned the practicality of the dual-purpose linac to accelerate both colliding positron bunches and the drive beams required for the plasma linac. In addition, many other aspects of the project were also considered; the discussion and conclusions are documented in this paper. Finally, a new baseline is outlined that has been optimised and addresses several weaknesses in the original design, has higher luminosity, reduced centre-of-mass energy boost and additional features such as positron polarization as well as electron polarization. Although HALHF has become longer and more expensive, it remains significantly smaller and cheaper than other mature Higgs factory designs currently under discussion.

physics.acc-ph

Physics Performance and Detector Requirements at an Asymmetric Higgs Factory

The Hybrid Asymmetric Linear Higgs Factory (HALHF) proposes a shorter and cheaper design for a future Higgs factory. It reaches a $\sqrt{s} = 250$ GeV using a 500 GeV electron beam accelerated by an electron-driven plasma wake-field, and a conventionally-accelerated 31 GeV positron beam. Assuming plasma acceleration R&D challenges are solved in a timely manner, the asymmetry of the collisions brings additional challenges regarding the detector and the physics analyses, from forward boosted topologies and beam backgrounds. This contribution will detail the impact of beam parameters on beam-induced backgrounds, and provide a first look at what modification compared to e.g. the ILD can improve the physics performance at such a facility. The studies will be benchmarked against some flagship Higgs Factory analyses for comparison.

hep-ex

Higgs Self-coupling Strategy at Linear e$^+$e$^-$ Colliders

The determination of the Higgs self-coupling is a key target for future colliders, in particular through di-Higgs production at $e^+e^-$ Linear Colliders with $\sqrt{s} > 450$\,GeV, e.g.\ ILC, C3 or CLIC. This contribution will discuss the roles and the interplay of di-Higgs production processes at various collider energies, including the case of non-SM values of the self-coupling. Previous studies, already based on Geant4-based detector simulation, established that the Higgs self-coupling can be extracted with $10-27\%$ precision and provided a solid understanding of the limiting factors. This provides a robust starting point to explore the potential of more modern and sophisticated reconstruction and analysis techniques. We summarize the impact of advanced, often machine-learning-based algorithms, including e.g.\ jet clustering, kinematic fitting and matrix element-inferred likelihoods on the reconstruction of $ZHH$ events and before discussing the dependence of the projected precision on the center-of-mass energy and on the actual value of the self-coupling.

hep-ex

Physics case for an $e^+e^-$ collider at 500 GeV and above

Some highlights of the physics case for running an $e^+e^-$ collider at 500 GeV and above are discussed with a particular emphasis on the experimental access to the Higgs potential via di-Higgs and (at sufficiently high energy) triple Higgs production. The information obtainable from Higgs pair production at about 500 GeV is compared with the prospects for the HL-LHC and with the indirect information that can be obtained from a Higgs factory running at lower energies.

hep-ph

Towards an update of the ILD ZHH analysis

The double Higgs-strahlungs process $e^+e^- \rightarrow ZHH$ allows to access the Higgs self-coupling at center-of-mass energies above $450$ GeV. Its cross-section exhibits a very different behavior as a function of the value of the self-coupling than fusion-type processes like gluon-gluon fusion at LHC (and future hadron colliders) and $WW$ / $ZZ$ fusion at higher energy lepton colliders. Therefore it adds unique information to the picture, in particular should the value of the Higgs self-coupling differ from its Standard Model prediction. The last full evaluation of the potential of the ILC to measure this process is more than ten years old, and since then many of the reconstruction tools have received very significant improvements. This contribution presents the ongoing work in the ILD collaboration to update the ZHH projections for the next European Particle Physics Strategy Update.

hep-ex

Searching for new physics in WW and single-W events

Pair-production and single-production of $W$ bosons provide many opportunities to look for new physics via precision measurements, for instance via scrutinising the involved triple-gauge vertices or by measuring CKM matrix elements in an environment very complementary to $B$ hadron decays. This contribution presents the ongoing work based on full simulation of the ILD concept, exploiting the O($10^8$) $W$ bosons produced during the $250$\,GeV stage of the ILC, as well as the CLD concept proposed for the FCC-ee. The projections, which also contribute to two focus topics of the current ECFA study on future Higgs/Top/Electroweak factories, promise improvements of the measurement precision of TGCs and the CKM matrix, respectively, of one to two orders of magnitude with respects to LEP.

hep-ex

$\widetilde{\tau}$ searches at future e$^+$e$^-$ colliders

The direct pair-production of the superpartner of the $\tau$-lepton, the $\widetilde{\tau}$, is one of the most interesting channels to search for SUSY in: the $\widetilde{\tau}$ is likely to be the lightest of the scalar leptons, and is one of the most experimentally chalanging ones. The current model-independent $\widetilde{\tau}$ limits come from LEP, while limits obtained at the LHC do extend to higher masses, but are model-dependent. The future Higgs factories will be powerful facilities for SUSY searches, offering advantages with respect to previous electron-positron colliders as well as to hadron machines. In order to quantify the capabilities of these future $e^+e^-$ colliders, the "worst-case" scenario for $\widetilde{\tau}$ exclusion/discovery has been studied, taking into account the effect of the $\widetilde{\tau}$ mixing on $\widetilde{\tau}$ production cross-section and detection efficiency. To evaluate the latter, the ILD concept, originally developed for the International Linear Collider (ILC), and the ILC beam conditions at a centre-of-mass energy of 500 GeV have been used for detailed simulations. The obtained exclusion and discovery reaches extend to only a few GeV below the kinematic limit even in the worst-case scenario. The results of the detailed simulation study are then discussed in view of the experimental environment of other proposed Higgs factory projects.

hep-ph

Focus topics for the ECFA study on Higgs / Top / EW factories

In order to stimulate new engagement and trigger some concrete studies in areas where further work would be beneficial towards fully understanding the physics potential of an $e^+e^-$ Higgs / Top / Electroweak factory, we propose to define a set of focus topics. The general reasoning and the proposed topics are described in this document.

hep-ph

High-rate electron detectors to study Compton scattering in non-perturbative QED

Research in non-perturbative QED in strong-field backgrounds has gained interest in recent years, due to advances in high-intensity laser technologies that make extreme fields accessible in the laboratory. One key signature of strong-field QED is non-linear Compton scattering in collisions between a relativistic electron beam and a high-intensity laser pulse. In the vicinity of strong fields, the electron gains a larger effective mass, which leads to a laser-intensity-dependent shift of the kinematic Compton edge and the appearance of higher-order harmonics in the energy spectrum. One of the challenges of measuring the Compton energy spectrum in laser-electron-beam collisions is the enormous flux of outgoing Compton-scattered electrons and photons, ranging from $10^3$ to $10^9$ particles per collision. We present a combined detector system for high-rate Compton electron detection in the context of the planned LUXE experiment, consisting of a spatially segmented gas-filled Cherenkov detector and a scintillator screen imaged by an optical camera system. The detectors are placed in a forward dipole spectrometer to resolve the electron energy spectrum. Finally, we discuss techniques to reconstruct the non-linear Compton electron energy spectrum from the high-rate electron detection system and to extract the features of non-perturbative QED from the spectrum.

hep-ex