Searcharxiv⌕ Search

arXiv subjects

Jens H. Schmid

Publications and source records attributed to Jens H. Schmid.

15 recordsLinked to original sources
arXiv2026

Topological photonic cavities based on dissimilar Bragg gratings

Topological photonic cavities offer a powerful route to robust optical confinement and enhanced light-matter interactions. Interface states that emerge at the boundary between one-dimensional periodic structures with distinct topological phases, enable cavities with ultra-small mode volumes and intrinsic protection against disorder. Existing implementations typically create the trivial and topological phases by redefining the unit cell on either side of the cavity, so that both periodic structures share the same band structure. This constraint limits design flexibility and the range of accessible devices. Here we introduce a fundamentally different strategy for realizing topological cavities based on combining periodic waveguides with distinct band structures. By exploiting bandgap closing and band inversion in Bragg gratings, we independently control the topological phase and bandgap width of each structure. We experimentally realize silicon topological cavities formed by two different Bragg gratings without period shifting, and observe topological modes despite significant differences between the two gratings. Our results establish a new route to topological photonic cavity design, demonstrating that band inversion between dissimilar Bragg gratings enables cavity formation beyond symmetric constraints and provides a mechanism to engineer optical confinement via mirror asymmetry.

physics.optics↗
arXiv2026

Directional and contra-directional coupling in Huygens' metawaveguide microring resonators

Huygens' metawaveguides represent a transformative concept in photonic device engineering, enabling unprecedented control over light propagation. This study presents, for the first time, integrated Huygens'-based microring resonators and directional and contra-directional couplers, specifically designed for operation at the S- and C-band telecommunication wavelengths. By leveraging the unique properties of resonant Huygens' waveguides, we demonstrate efficient evanescent directional coupling with high-Q resonators, characterized by negative group index and near-zero dispersion, which are critical for enhancing performance in compact, high-performance add-drop filters. The research further explores the implications of these novel structures on group index and group velocity dispersion, providing insights into their potential applications in nonlinear optics and quantum information technologies. Notably, the introduction of a hybrid subwavelength grating-Huygens' contra-directional coupler facilitates backward coupling between resonant and non-resonant metawaveguides, achieving a broad spectral rejection bandwidth. Our findings advance the integration of resonant metamaterials into scalable photonic platforms, laying the groundwork for innovative applications in optical communications, quantum photonics and sensing systems.

physics.optics↗
arXiv2024

Perfectly vertical silicon metamaterial grating couplers with large segmentation periods up to 650 nm

Perfectly vertical grating couplers leveraging metamaterials can achieve both high coupling efficiency and minimal back reflection. The fabricability of these designs, with segmentations in both the longitudinal and transverse dimensions, hinges on the minimum feature size offered by cutting-edge fabrication technologies. In this work we present both numerical and experimental evidence that high performance devices can be obtained while using large transverse segmentation periods of up to 650 nm, thereby increasing the critical feature sizes. For single-step etched couplers produced on the 220 nm silicon-on-insulator platform, we demonstrate coupling efficiencies of nearly 50% in the C-band and remarkably low back reflections of -22 dB at zero-degree incidence angle. Notably, the duty cycles used in our optimized designs deviate significantly from those predicted by traditional effective medium models, even for small periods. Our findings promise to expand the range of optical properties achievable in metamaterials and offer fresh insights into the fine-tuning of nanophotonic devices.

physics.optics↗
arXiv2024

Experimental demonstration of photonic phase correctors based on grating coupler arrays and thermo-optic shifters

In ground-based astronomy, the ability to couple light into single-mode fibers (SMFs) is limited by atmospheric turbulence, which prohibits the use of many astrophotonic instruments. We propose a silicon-on-insulator photonic chip capable of coherently coupling the out-of-phase beamlets from the subapertures of a telescope pupil into an SMF. The photonic integrated circuit (PIC) consists of an array of grating couplers that are used to inject light from free space into single-mode waveguides on the chip. Metallic heaters modulate the refractive index of a coiled section of the waveguides, facilitating the co-phasing of the propagating modes. The phased beamlets can then be coherently combined to efficiently deliver the light to an output SMF. In an adaptive optics (AO) system, the phase corrector acts as a deformable mirror (DM) commanded by a controller that takes phase measurements from a wavefront sensor (WFS). We present experimental results for the PIC tested on an AO testbed and compare the performance to simulations.

astro-ph.IM↗
arXiv2024

End-to-end simulations of photonic phase correctors for adaptive optics systems

Optical beams and starlight distorted by atmospheric turbulence can be corrected with adaptive optics systems to enable efficient coupling into single-mode fibers. Deformable mirrors, used to flatten the wavefront in astronomical telescopes, are costly, sensitive, and complex mechanical components that require careful calibration to enable high-quality imaging in astronomy, microscopy, and vision science. They are also impractical to deploy in large numbers for non-imaging applications like free-space optical communication. Here, we propose a photonic integrated c rcuit capable of spatially sampling the wavefront collected by the telescope and co-phasing the subapertures to maximize the flux delivered to an output single-mode fiber as the integrated photonic implementation of a deformable mirror. We present the results of end-to-end simulations to quantify the performance of the proposed photonic solution under varying atmospheric conditions toward realizing an adaptive optics system without a deformable mirror for free-space optical receivers.

physics.optics↗
arXiv2023

Optical wavefront phase-tilt measurement using Si-photonic waveguide grating couplers

Silicon photonic wavefront phase-tilt sensors for wavefront monitoring using surface coupling grating arrays are demonstrated. The first design employs the intrinsic angle dependence of the grating coupling efficiency to determine local wavefront tilt, with a measured sensitivity of 7 dB/degree. A second design connects four gratings in an interferometric waveguide circuit to determine incident wavefront phase variation across the sensor area. In this device, one fringe spacing corresponds to approximately 2 degree wavefront tilt change. These sensor elements can sample a wavefront incident on the chip surface without the use of bulk optic elements, fiber arrays, or imaging arrays. Both sensor elements are less than 60 um across, and can be combined into larger arrays to monitor wavefront tilt and distortion across an image or pupil plane in adaptive optics systems for free space optical communications, astronomy and beam pointing applications.

physics.optics↗
arXiv2022

Subwavelength grating metamaterial waveguides and ring resonators on a silicon nitride platform

We propose and demonstrate subwavelength grating (SWG) metamaterial waveguides and ring resonators on a silicon nitride platform for the first time. The SWG waveguide is engineered such that a large overlap of 53% of the Bloch mode with the top cladding material is achieved, demonstrating excellent potential for applications in evanescent field sensing and light amplification. The devices, which have critical dimensions greater than 100 nm, are fabricated using a commercial rapid turn-around silicon nitride prototyping foundry process using electron beam lithography. Experimental characterization of the fabricated device reveals excellent ring resonator internal quality factor (2.11x10^5) and low propagation loss (~1.5 dB/cm) in the C-band, a significant improvement of both parameters compared to silicon based SWG ring resonators. These results demonstrate the promising prospects of SWG metamaterial structures for silicon nitride based photonic integrated circuits.

physics.optics↗
arXiv2022

Highly efficient ultra-broad beam silicon nanophotonic antenna based on near-field phase engineering

Optical antennas are a fundamental element in optical phased arrays (OPA) and free-space optical interconnects. An outstanding challenge in optical antenna design lies in achieving high radiation efficiency, ultra-compact footprint and broad radiation angle simultaneously, as required for dense 2D OPAs with a broad steering range. Here we demonstrate a fundamentally new concept of a nanophotonic antenna based on near-field phase-engineering. By introducing a specific near-field phase factor in the Fraunhofer transformation, the far-field beam is widened beyond the diffraction limit for a given aperture size. We use transversally interleaved subwavelength grating nanostructures to control the near-field phase. The antenna reaches a radiation efficiency of 82%, a compact footprint of 3.1 um * 1.75 um and an ultra-broad far-field beam width of 52° and 62° in the longitudinal and transversal direction, respectively. This unprecedented design performance is achieved with a single-etch grating nanostructure in a 300-nm SOI platform.

physics.optics↗
arXiv2022

PCA-Boosted Autoencoders for Nonlinear Dimensionality Reduction in Low Data Regimes

Autoencoders (AE) provide a useful method for nonlinear dimensionality reduction but are ill-suited for low data regimes. Conversely, Principal Component Analysis (PCA) is data-efficient but is limited to linear dimensionality reduction, posing a problem when data exhibits inherent nonlinearity. This presents a challenge in various scientific and engineering domains such as the nanophotonic component design, where data exhibits nonlinear features while being expensive to obtain due to costly real measurements or resource-consuming solutions of partial differential equations. To address this difficulty, we propose a technique that harnesses the best of both worlds: an autoencoder that leverages PCA to perform well on scarce nonlinear data. Specifically, we outline a numerically robust PCA-based initialization of AE, which, together with the parameterized ReLU activation function, allows the training process to start from an exact PCA solution and improve upon it. A synthetic example is presented first to study the effects of data nonlinearity and size on the performance of the proposed method. We then evaluate our method on several nanophotonic component design problems where obtaining useful data is expensive. To demonstrate universality, we also apply it to tasks in other scientific domains: a benchmark breast cancer dataset and a gene expression dataset. We show that our proposed approach is substantially better than both PCA and randomly initialized AE in the majority of low-data regime cases we consider, or at least is comparable to the best of either of the other two methods.

cs.LG↗
arXiv2022

Athermal and tunable echelle grating wavelength demultiplexers using a Mach-Zehnder interferometer launch structure

We present a comparative experimental study of three silicon photonic echelle grating demultiplexers that are integrated with a Mach-Zehnder interferometer (MZI) launch structure. By appropriate choice of the MZI configuration, the temperature induced shift of the demultiplexer channel wavelengths can be suppressed (athermal) or enhanced (super-thermal), or be controlled by an on-chip micro-heater. The latter two configurations allow the channel wavelengths to be actively tuned using lower power than possible by temperature tuning a conventional echelle demultiplexer. In the athermal configuration, the measured channel spectral shift is reduced to less than 10 pm/C, compared to the 83 pm/C shift for an unmodified echelle device. In super-thermal operation an enhanced channel temperature tuning rate of 170 pm/C is achieved. Finally, by modulating the MZI phase with an on-chip heater, the demultiplexer channels can be actively tuned to correct for ambient temperature fluctuations up to 20 C, using a drive current of less than 20 mA.

physics.optics↗
arXiv2021

Fibre Fabry-Pérot Astrophotonic Correlation Spectroscopy for Remote Gas Identification and Radial Velocity Measurements

We present a novel remote gas detection and identification technique based on correlation spectroscopy with a piezoelectric tunable fibre-optic Fabry-Pérot filter. We show that the spectral correlation amplitude between the filter transmission window and gas absorption features is related to the gas absorption optical depth, and that different gases can be distinguished from one another using their correlation signal phase. Using an observed telluric-corrected, high-resolution near-infrared spectrum of Venus, we show via simulation that the Doppler shift of gases lines can be extracted from the phase of the lock-in signal using low-cost, compact, and lightweight fibre-optic components with lock-in amplification to improve the signal-to-noise ratio. This correlation spectroscopy technique has applications in the detection and radial velocity determination of faint spectral features in astronomy and remote sensing. We experimentally demonstrate remote CO2 detection system using a lock-in amplifier, fibre-optic Fabry-Pérot filter, and single channel photodiode.

astro-ph.IM↗
arXiv2020

Spectrum-free integrated photonic remote molecular identification and sensing

Absorption spectroscopy is widely used in sensing and astronomy to understand molecular compositions on microscopic to cosmological scales. However, typical dispersive spectroscopic techniques require multichannel detection, fundamentally limiting the ability to detect extremely weak signals when compared to direct photometric methods. We report the realization of direct spectral molecular detection using a silicon nanophotonic waveguide resonator, obviating dispersive spectral acquisition. We use a thermally tunable silicon ring resonator with a transmission spectrum matched and cross-correlated to the quasi-periodic vibronic absorption lines of hydrogen cyanide. We show that the correlation peak amplitude is proportional to the number of overlapping ring resonances and gas lines, and that molecular specificity is obtained from the phase of the correlation signal in a single detection channel. Our results demonstrate on-chip correlation spectroscopy that is less restricted by the signal-to-noise penalty of other spectroscopic approaches, enabling the detection of faint spectral signatures.

physics.ins-det↗
arXiv2020

Design of Compact and Efficient Silicon Photonic Micro Antennas with Perfectly Vertical Emission

Compact and efficient optical antennas are fundamental components for many applications, including high-density fiber-chip coupling and optical phased arrays. Here we present the design of grating-based micro-antennas with perfectly vertical emission in the 300-nm silicon-on-insulator platform. We leverage a methodology combining adjoint optimization and machine learning dimensionality reduction to efficiently map the multiparameter design space of the antennas, analyse a large number of relevant performance metrics, carry out the required multi-objective optimization, and discover high performance designs. Using a one-step apodized grating we achieve a vertical upward diffraction efficiency of almost 92% with a 3.6 μm-long antenna. When coupled with an ultra-high numerical aperture fiber, the antenna exhibits a coupling efficiency of more than 81% (-0.9 dB) and a 1-dB bandwidth of almost 158 nm. The reflection generated by the perfectly vertical antenna is smaller than -20 dB on a 200-nm bandwidth centered at λ = 1550 nm.

physics.optics↗
arXiv2019

Mapping the global design space of nanophotonic components using machine learning pattern recognition

Nanophotonics finds ever broadening applications requiring complex component designs with a large number of parameters to be simultaneously optimized. Recent methodologies employing optimization algorithms commonly focus on a single design objective, provide isolated designs, and do not describe how the design parameters influence the device behaviour. Here we propose and demonstrate a machine-learning-based approach to map and characterize the multi-parameter design space of nanophotonic components. Pattern recognition is used to reveal the relationship between an initial sparse set of optimized designs through a significant reduction in the number of characterizing parameters. This defines a design sub-space of lower dimensionality that can be mapped faster by orders of magnitude than the original design space. As a result, multiple performance criteria are clearly visualized, revealing the interplay of the design parameters, highlighting performance and structural limitations, and inspiring new design ideas. This global perspective on high-dimensional design problems represents a major shift in how modern nanophotonic design is approached and provides a powerful tool to explore complexity in next-generation devices.

physics.app-ph↗