SearcharxivSearch

arXiv subjects

Jens Knobloch

Publications and source records attributed to Jens Knobloch.

9 recordsLinked to original sources

Stable Multi-Step Rollouts via Uncertainty-Guided Hybrid Dynamics

Multi-step rollouts are essential for model-based reinforcement learning (RL) and predictive control, yet learned dynamics models often become unstable when recursively applied, leading to divergence and unreliable policy updates. This paper proposes a model-agnostic hybrid dynamics framework that blends a provably contracting nominal model with a flexible excursion model through an uncertainty-guided switching law. The switching signal is derived from calibrated epistemic uncertainty and activates only when the system leaves the nominal region, ensuring that each model operates within its reliability regime. Under clearly stated smoothness and boundedness assumptions, we show that the resulting hybrid predictor yields globally bounded recursive multi-step rollouts: trajectories remain Lyapunov-stable in the nominal region and exhibit at most affine growth during excursions. To illustrate the theory in practice, we instantiate the hybrid dynamics framework within a model-based RL scheme that uses real one-step transitions for value learning and hybrid rollouts for policy improvement. Experiments on a nonlinear Duffing oscillator demonstrate stable long-horizon prediction and improved cost-effort trade-offs relative to a stabilizing baseline.

eess.SY

KIND: A Kalman-Inspired Adaptive Estimator for SRF Cavity Detuning

Superconducting radio frequency cavities with a high quality factor enable energy-efficient accelerator operation but are very sensitive to mechanical disturbances that detune their resonance. Accurate detuning estimation is therefore essential for efficient resonance control and stable beam conditions. This paper introduces Kalman-Inspired Neural Decomposition (KIND), a data-driven estimator that fuses a Dynamic Mode Decomposition model for stationary modal behavior with a Transformer-based predictor for transient dynamics. KIND further outputs learned uncertainty signals that indicate regime changes, enabling anomaly detection. Using operational cavity data, we compare KIND with a classical Kalman filtering baseline and discuss its potential as a foundation for future uncertainty-aware, forecast-based control.

eess.SY

Impact of metallographic polishing on the RF properties of Niobium for SRF applications

The performance of superconducting radio-frequency (SRF) cavities made of Niobium is tied to the quality of their inner surfaces exposed to the radio frequency (RF) waves. Future superconducting particle accelerators, because of their dimensions or the unprecedented stringent technical requirements, require the development of innovative surface processing techniques to improve processing reliability and if possible ecological footprint and cost, compared to conventional chemical processes. Metallographic polishing (MP) has emerged as a promising polishing technology to address these challenges. Previous studies focused on the characterization of the processed material surface at room temperature in the absence of RF waves. However, the evaluation of material properties, such as surface resistance under RF, at cryogenic temperature has failed, primarily due to the unavailability of devices capable of achieving the necessary resolution in the nanohm range. To overcome this limitation, a quadrupole resonator (QPR) has been utilized. The RF results demonstrate that the MP polishing, developed to preserve a high-quality niobium surface with very low surface resistance, is highly effective compared to conventional polishing. This conclusion is further supported by topography and microstructural analysis of the QPR top-hat samples, which revealed the clear superiority of the metallographic approach.

physics.acc-ph

Preparation of the First Cu-based Nb$_3$Sn Sample via Bronze Route for Quadrupole Resonator Testing

We report the first successful production of a Cu-based Nb$_3$Sn sample specifically designed for Quadrupole Resonator (QPR) testing, representing a significant step toward scalable RF superconducting coatings of Nb$_3$Sn on copper substrates. The sample was fabricated using an optimized electrochemical thermal synthesis (ETS) via the bronze route, incorporating several key advancements: electropolishing of the Cu substrate, electroplating of the bronze precursor layer, a tailored heat treatment at approximately 700 $^\circ$C to promote grain growth and suppress tin-rich impurity phases, and a newly developed chemical etching procedure for effective removal of surface bronze residues and contaminants. These improvements address longstanding challenges in the fabrication of high-quality Cu-based Nb$_3$Sn thin films. Subsequent QPR measurements yielded the peak magnetic field and temperature dependent surface resistance $R_s$, as well as the superconducting transition temperature and quench field. Although the achieved RF performance -- characterized by a minimum $R_s$ of 43.4 n$Ω$ at 4.5 K and 15 mT -- is not yet optimal, the results clearly demonstrate the feasibility of this approach and its potential for further enhancement through process refinement.

physics.app-ph

Improved RF Performance of Niobium Cavities via In-situ Vacuum Heat Treatment Technique

Vacuum thermal treatments (baking) are known to improve the superconducting properties of the RF surface layer of niobium cavities, and are employed as a last processing step to increase their efficiency determined by intrinsic quality factor Q0. A new method to perform the baking has been demonstrated. It consists in annealing of an evacuated cavity with the local heaters installed on its outer surface in a cryostat which ensures an exterior vacuum and protects the outer cavity surface from oxidation. Such a set-up has a number of advantages as it does not require to cool the cavity flanges during baking, and allows to perform the "cold" RF characterization of the cavity in situ, immediately after the thermal treatment without disassembly of heating elements. Moreover, the air exposure that causes partial degradation of Q0 by surface reoxidation is avoided. The heat treatment of a single-cell 1.3 GHz niobium cavity at 230 °C for 24 h demonstrated the doubling of Q0 at Eacc=10 MV/m (from 1.20e10 to 2.4e10) and retained the maximal accelerating field of 35 MV/m without quenching. The selection of treatment parameters is based on our previous XPS studies. This treatment ensures incomplete dissolution of the native oxide by oxygen diffusion, thereby preventing interaction of niobium surface with external contaminants. We propose to bake the cavities directly in a cryomodule, which would allow to use the treatment to improve their performance. The potential impact of material parameters on the components of surface resistance has been briefly examined.

physics.acc-ph

In-situ Synchrotron X-Ray Photoelectron Spectroscopy Study of Medium-Temperature Baking of Niobium for SRF Application

In the present work the chemical composition of niobium surface upon 200-400 °C baking similar to "medium-temperature baking" and "furnace baking" of cavities is explored in-situ by synchrotron X-ray photoelectron spectroscopy (XPS). Our findings imply that below the critical thickness of $Nb_2O_5$ layer (about 1 nm) niobium starts to interact actively with surface impurities, such as carbon and phosphorus. By studying the kinetics of the native oxide reduction, the activation energy and the rate-constant relation have been determined and used for the calculation of the oxygen-concentration depth profiles. It has been established that the controlled diffusion of oxygen when the native-oxide layer represents an oxygen source is realized at temperatures 200-300 °C, while at 400 °C the pentoxide is completely reduced and the doping level is determined by an ambient oxygen partial pressure. Fluorine (F to Nb atomic ratio is about 0.2) after the buffered chemical polishing was found to be incorporated into the surface layer probed by XPS (about 4.6 nm), and its concentration increased during the low-temperature baking (F/Nb up to 0.35 at 230 °C) and depleted at higher temperatures (F/Nb=0.11 at 400 °C). Thus, the influence of fluorine on the performance of mid-T baked, mild-baked (120 °C/48 h) and nitrogen-doped cavities must be considered. The possible role of fluorine in the educed $Nb^{+5}$ to $Nb^{+4}$ reaction under the impact of an X-ray beam at room temperature and during the thermal treatment is also discussed. The range of temperature and duration parameters of the thermal treatment at which the niobium surface would not be contaminated with impurities is determined for industrial applications.

physics.acc-ph

A model to explain the Q-increase by moderate-temperature treatment in Nb SRF cavities

It is well known that moderate temperature baking of niobium cavities can improve the surface resistance. Presently, it is believed that the diffusion of oxygen into the bulk, resulting in interstitial defects, is responsible for the change. In this note we propose that the damaged surface layer remaining after dissolution of the thin niobium pentoxide may in fact be the dominant contributor to the improved the cavity quality factor by strongly pinning trapped flux lines. We propose some of experiments to test this theory.

physics.acc-ph

The Development of Energy-Recovery Linacs

Energy-recovery linacs (ERLs) have been emphasised by the recent (2020) update of the European Strategy for Particle Physics as one of the most promising technologies for the accelerator base of future high-energy physics. The current paper has been written as a base document to support and specify details of the recently published European roadmap for the development of energy-recovery linacs. The paper summarises the previous achievements on ERLs and the status of the field and its basic technology items. The main possible future contributions and applications of ERLs to particle and nuclear physics as well as industrial developments are presented. The paper includes a vision for the further future, beyond 2030, as well as a comparative data base for the main existing and forthcoming ERL facilities. A series of continuous innovations, such as on intense electron sources or high-quality superconducting cavity technology, will massively contribute to the development of accelerator physics at large. Industrial applications are potentially revolutionary and may carry the development of ERLs much further, establishing another shining example of the impact of particle physics on society and its technical foundation with a special view on sustaining nature.

physics.acc-ph

Scientific opportunies for bERLinPro 2020+, report with ideas and conclusions from bERLinProCamp 2019

The Energy Recovery Linac (ERL) paradigm offers the promise to generate intense electron beams of superior quality with extremely small six-dimensional phase space for many applications in the physical sciences, materials science, chemistry, health, information technology and security. Helmholtz-Zentrum Berlin started in 2010 an intensive R\&D programme to address the challenges related to the ERL as driver for future light sources by setting up the bERLinPro (Berlin ERL Project) ERL with 50 MeV beam energy and high average current. The project is close to reach its major milestone in 2020, acceleration and recovery of a high brightness electron beam. The goal of bERLinProCamp 2019 was to discuss scientific opportunities for bERLinPro 2020+. bERLinProCamp 2019 was held on Tue, 17.09.2019 at Helmholtz-Zentrum Berlin, Berlin, Germany. This paper summarizes the main themes and output of the workshop.

physics.acc-ph