Searcharxiv⌕ Search

arXiv subjects

Jens Osterhoff

Publications and source records attributed to Jens Osterhoff.

18 recordsLinked to original sources
arXiv2026

Multi-kilohertz laser plasma acceleration driven by an industrial-grade Yb:YAG laser

Laser plasma accelerators (LPAs) are a promising platform for compact radiation sources. For a wide range of applications, including radiotherapy, ultrafast electron diffraction and time-resolved imaging, stable operation at high repetition rates is essential in order to deliver competitive average particle flux. Here we demonstrate the first LPA driven by an industrial-grade ytterbium-doped yttrium aluminium garnet (Yb:YAG) laser, designed for high-average-power operation. The picosecond laser pulses are post-compressed in a multi-pass cell to 50 fs duration and used to drive the interaction. The electron accelerator is operated in burst mode, at repetition rates tuneable from 0.625 to 6.25 kHz, representing a substantial increase compared to the state-of-the-art. Across this range, the electron beam properties remain unchanged, with average charges of 10-12 pC per shot, divergences of 50-70 mrad, and Maxwellian-like spectra extending to a few MeV. Numerical simulations capture the key features of the experimental observations and indicate acceleration in the self-modulated regime, enabled by relativistic self-focusing in near-critical-density plasma. Combining industrial high-average-power laser technology with plasma-based acceleration, these results represent a key step toward scalable, compact high-repetition-rate electron sources for medical, imaging and industrial applications.

physics.plasm-ph↗
arXiv2025

Design Initiative for a 10 TeV pCM Wakefield Collider

This document outlines a community-driven Design Study for a 10 TeV pCM Wakefield Accelerator Collider. The 2020 ESPP Report emphasized the need for Advanced Accelerator R\&D, and the 2023 P5 Report calls for the ``delivery of an end-to-end design concept, including cost scales, with self-consistent parameters throughout." This Design Study leverages recent experimental and theoretical progress resulting from a global R\&D program in order to deliver a unified, 10 TeV Wakefield Collider concept. Wakefield Accelerators provide ultra-high accelerating gradients which enables an upgrade path that will extend the reach of Linear Colliders beyond the electroweak scale. Here, we describe the organization of the Design Study including timeline and deliverables, and we detail the requirements and challenges on the path to a 10 TeV Wakefield Collider.

physics.acc-ph↗
arXiv2025

HALHF: a hybrid, asymmetric, linear Higgs factory using plasma- and RF-based acceleration

HALHF is a hybrid linear collider that uses electron-driven plasma-wakefield acceleration to accelerate electrons to high energy while using radio-frequency cavity technology to accelerate positrons. The most cost-effective solution collides low-energy positrons with high-energy electrons, producing a boost to the final state in the electron direction with $γ= 1.67$. The current HALHF baseline design produces a luminosity comparable to that of the baseline ILC but with a greatly reduced construction and carbon footprint and hence much lower cost than the mature linear-collider designs ILC and CLIC. Costs for HALHF are evaluated, together with that for the approximate 15-year R\&D programme necessary to realise HALHF. Time scales and cost for the R\&D are estimated. Upgrade paths for HALHF technology from a 250~GeV Higgs factory, through 380 and 550~GeV, up to 10~TeV are sketched.

physics.acc-ph↗
arXiv2024

Resonant emittance mixing of flat beams in plasma accelerators

Linear colliders rely on high-quality flat beams to achieve the desired event rate, while avoiding potentially deleterious beamstrahlung effects. Here, we show that flat beams in plasma accelerators can be subject to quality degradation due to emittance mixing. This effect occurs when the beam particles' betatron oscillations in a nonlinearly coupled wakefield become resonant in the horizontal and vertical planes. Emittance mixing can lead to a substantial decrease of the luminosity, the main quantity determining the event rate. In some cases, the use of laser drivers or flat particle beam drivers may decrease the fraction of resonant particles and, hence, mitigate emittance deterioration.

physics.acc-ph↗
arXiv2024

Application of a plasma-based energy booster in operational free-electron lasers

Plasma-based accelerators are a promising approach for reducing the size and cost of future particle accelerators, making them a viable technology for constructing and upgrading X-ray free-electron lasers (FELs). Adding an energy booster stage to the linear accelerator of an operational X-ray FEL is recognised as a realistic near-term application of plasma accelerators, with a significant impact on the scientific reach of these facilities. Here, we discuss potential use cases of such a plasma-based energy booster and apply particle-in-cell simulations to estimate its ability to enhance the performance of existing X-ray FEL facilities.

physics.acc-ph↗
arXiv2024

Noninvasive cavity-based charge diagnostic for plasma accelerators

The charge contained in an electron bunch is one of the most important parameters in accelerator physics. Several techniques to measure the electron bunch charge exist. However, many conventional charge diagnostics face serious drawbacks when applied to plasma accelerators. For example, integrating current transformers (ICTs or toroids) have been shown to be sensitive to the electromagnetic pulses (EMP) originating from the plasma, whereas scintillating screens are sensitive to background radiation such as betatron radiation or bremsstrahlung and only allow for a destructive measurement of the bunch charge. We show measurements with a noninvasive, cavity-based charge diagnostic (the DaMon), which demonstrate its high sensitivity, high dynamic range and resistance towards EMP. The measurements are compared to both an ICT and an absolutely calibrated scintillating screen.

physics.acc-ph↗
arXiv2023

Emittance-preserving acceleration of high-quality positron beams using warm plasma filaments

Preserving the quality of positron beams in plasma-based accelerators, where wakefields are generated in electron filaments, is challenging. These wakefields are characterized by transversely non-linear focusing fields and non-uniform accelerating fields. However, a nonzero plasma temperature linearizes the transverse wakefield within the central region of the electron filament. In this study, we employ 3D particle-in-cell simulations with mesh refinement to demonstrate that beams with emittances on the order of tens of nanometers are contained within the linearized region of the transverse wakefield. This enables emittance preservation to one percent, while positron beams with the same charge and micrometer emittances, which sample the non-linear part of the transverse wakefield, experience a relative emittance growth of ten percent. Additionally, we observe a significant reduction in the growth rate of the slice energy spread for the tens of nanometers emittance beams in comparison to the micrometer emittance beams. The utilization of warm plasmas in conjunction with low-emittance beams opens up new avenues for enhancing the beam quality across various plasma-based positron acceleration approaches.

physics.acc-ph↗
arXiv2023

Plasma Lens Prototype Progress: Plasma Diagnostics And Particle Tracking For ILC e+ Source

In recent years, the concept of high-gradient, symmetric focusing using active plasma lenses has regained notable attention owing to its potential benefits in terms of compactness and beam dynamics when juxtaposed with traditional focusing elements. An enticing application lies in the optical matching of extensively divergent positrons originating from the undulator-based ILC positron source, thereby enhancing the positron yield in subsequent accelerating structures. Through a collaboration between the University of Hamburg and DESY Hamburg, a scaled-down prototype for this purpose has been conceptualized and fabricated. In this presentation, we provide an overview of the ongoing progress in the development of this prototype. Furthermore, first insights into the development of a particle tracking code especially designed for plasma lenses with implemented Bayes optimization, are given.

physics.acc-ph↗
arXiv2023

Post-compression of multi-mJ picosecond pulses to few-cycles approaching the terawatt regime

Advancing ultrafast high-repetition-rate lasers to shortest pulse durations comprising only a few optical cycles while pushing their energy into the multi-millijoule regime opens a route towards terawatt-class peak powers at unprecedented average power. We explore this route via efficient post-compression of high-energy 1.2 ps pulses from an Ytterbium InnoSlab laser to 9.6 fs duration using gas-filled multi-pass cells (MPCs) at a repetition rate of 1 kHz. Employing dual-stage compression with a second MPC stage supporting a close-to-octave-spanning bandwidth enabled by dispersion-matched dielectric mirrors, a record compression factor of 125 is reached at 70% overall efficiency, delivering 6.7 mJ pulses with a peak power of about 0.3 TW. Moreover, we show that post-compression can improve the temporal contrast at picosecond delay by at least one order of magnitude. Our results demonstrate efficient conversion of multi-millijoule picosecond lasers to high-peak-power few-cycle sources, opening up new parameter regimes for laser plasma physics, high energy physics, biomedicine and attosecond science.

physics.optics↗
arXiv2022

Polarized Electron Beams from Laser Plasma Acceleration and Their Polarimetry

In recent years, Laser Plasma Acceleration (LPA) has become a promising alternative to conventional RF accelerators. However, so far, it has only been theoretically shown that generating polarized LPA beams is possible. The LEAP (Laser Electron Acceleration with Polarization) project at DESY aims to demonstrate this experimentally for the first time, using a pre-polarized plasma target. The electron polarization will be measured with photon transmission polarimetry, which makes use of the production of circularly polarized bremsstrahlung during the passage of the electron beams through a suitable converter target. The photon polarization is then measured with the aid of transmission asymmetry arising from reversing the magnetization direction of an iron absorber. In this contribution an overview of the LEAP project is presented, detailing the generation of the polarized electron beams along with the design and simulation studies of the polarimeter.

physics.acc-ph↗
arXiv2022

Stability of ionisation-injection-based laser-plasma accelerators

Laser-plasma acceleration (LPA) is a compact technique to accelerate electron bunches to highly relativistic energies, making it a promising candidate to power radiation sources for industrial or medical applications. We report on the generation of electron beams from an 80 MeV-level LPA setup based on ionisation injection (II) over a duration of 8 hours at a repetition rate of 2.5 Hz, resulting in 72,000 consecutive shots with charge injection and acceleration. Over the full operation time the moving averages of the total beam charge of 14.5 pC and the charge between 70-80 MeV did not drift on a detectable level. The largest source of shot-to-shot jitter was in the beam charge (26% standard deviation), which was most strongly correlated with fluctuations in the plasma density (3.6% standard deviation). Particle-in-cell simulations demonstrate that this was chiefly caused by stronger laser self-focusing in higher density plasmas, which significantly increased the ionised charge along with the emittance of the beam. The nonlinearity of this process imposes tight constraints on the reproducibility of the laser-plasma conditions required for a low jitter II-LPA output if self-focusing plays a role in the laser evolution.

physics.acc-ph↗
arXiv2020

Ponderomotive Injection in Plasma Wakefield Accelerators

A new electron injection scheme is proposed in sub-relativistic plasma wakefield accelerators. A transverse laser ionizes a dopant gas and ponderomotively accelerates the released electrons in the direction of wake propagation. This process enables electron trapping in the wakefield even for a wakefield potential below the trapping threshold. We study the scheme theoretically and by means of particle-in-cell simulations to demonstrate high-quality beam formation and acceleration with sub-micrometer normalized emittances and sub-percent uncorrelated energy spreads.

physics.plasm-ph↗
arXiv2020

Controlled density-downramp injection in a beam-driven plasma wakefield accelerator

This paper describes the utilization of beam-driven plasma wakefield acceleration to implement a high-quality plasma cathode via density-downramp injection in a short injector stage at the FLASHForward facility at DESY. Electron beams with charge of up to 105 pC and energy spread of a few percent were accelerated by a tunable effective accelerating field of up to 2.7 GV/m. The plasma cathode was operated drift-free with very high injection efficiency. Sources of jitter, the emittance and divergence of the resulting beam were investigated and modeled, as were strategies for performance improvements that would further increase the wide-ranging applications for a plasma cathode with the demonstrated operational stability

physics.acc-ph↗
arXiv2019

A note on the experiment parameters for the non-resonant streaming instability: competition between left and right circularly polarized modes

A non-resonant streaming instability driven by cosmic-ray currents, also called Bell's instability, is proposed as a candidate for providing the required magnetic turbulence of efficient diffusive shock accelerations. To demonstrate the saturation level and mechanism of the non-resonant streaming instability in a laboratory environment, we attempt to develop an experiment at the Photo Injector Test Facility at DESY, Zeuthen site (PITZ). As an electron beam is used to replace the proton beam to carry the cosmic-ray current in our experiment, the polarization of the non-resonant streaming instability will be modified from the left-handed (LH) mode to the right-handed (RH) mode. The theoretical instability analysis shows that the growth rate of this RH non-resonant mode may be smaller than it of the LH resonant mode. However the LH resonant mode can be ignored in our experiment while the expected wavelength is longer than the used plasma cell. The results of PIC simulations will also support this contention and the occurrence of non-resonant streaming instability in our experiment.

physics.plasm-ph↗
arXiv2019

Plasma Lenses for Relativistic Laser Beams in Laser Wakefield Accelerators

Focusing petawatt-level laser beams to a variety of spot sizes for different applications is expensive in cost, labor and space. In this paper, we propose a plasma lens to flexibly resize the laser beam by utilizing the laser self-focusing effect. Using a fixed conventional focusing system to focus the laser a short distance in front of the plasma, we can adjust the effective laser beam waist within a certain range, as if a variety of focusing systems were used with the plasma lens acting as an adjustable eyepiece in a telescope. Such a setup is a powerful tool for laser wakefield accelerator experiments in state-of-art petawatt laser projects and allows for scanning focal spot parameters.

physics.plasm-ph↗
arXiv2018

Generation of quasi continuous-wave electron beams in an L-band normal conducting pulsed RF injector for laboratory astrophysics experiments

We report on an approach to produce quasi continuous-wave (cw) electron beams with an average beam current of milliamperes and a mean beam energy of a few MeV in a pulsed RF injector. Potential applications are in the planned laboratory astrophysics programs at DESY. The beam generation is based on field emission from a specially designed metallic field emitter. A quasi cw beam profile is formed over subsequent RF cycles at the resonance frequency of the gun cavity. This is realized by debunching in a cut disk structure accelerating cavity (booster) downstream of the gun. The peak and average beam currents can be tuned in beam dynamics simulations by adjusting operation conditions of the booster cavity. Optimization of the transverse beam size at specific positions (e.g., entrance of the plasma experiment) is performed by applying magnetic focusing fields provided by solenoids along the beam line. In this paper, the design of a microtip field emitter is introduced and characterized in electromagnetic field simulations in the gun cavity. A series of particle tracking simulations are conducted for multi-parametric optimization of the parameters of the produced quasi cw electron beams. The obtained results will be presented and discussed. In addition, measurements of the parasitic field emission (PFE) current (dark current) in the PITZ gun will be exemplarily shown to distinguish its order of magnitude from the produced beam current by the designed field emitter.

physics.acc-ph↗
arXiv2018

Analytical model for the uncorrelated emittance evolution of externally injected beams in plasma-based accelerators

This article introduces an analytical formalism for the calculation of the evolution of beam moments and the transverse emittance for beams which are externally injected into plasma wakefield accelerators. This formalism is then applied to two scenarios with increasing complexity - a single beam slice without energy gain and a single beam slice with energy gain, both propagating at a fixed co-moving position behind the driver. The obtained results are then compared to particle-in-cell (PIC) simulations as well as results obtained using an semi-analytic numerical approach (SANA). We find excellent agreement between results from the analytical model and from SANA and PIC.

physics.acc-ph↗