arXiv subjects

Jeong-Gyu Kim

Publications and source records attributed to Jeong-Gyu Kim.

At least 19 recordsLinked to original sources

arXiv2026

Cosmic Ray Feedback in Galactic Disks: Star Formation, Cosmic Ray Transport, and Multiphase Outflows in TIGRESS++ Simulations

We present new simulations of local star-forming disks that self-consistently evolve cosmic rays (CRs) and multiphase gas using TIGRESS++. To isolate the role of CRs, we conduct paired simulations under solar-neighborhood conditions: a magnetohydrodynamics (MHD) model following the standard TIGRESS-classic framework with FUV heating and supernova (SN) feedback from star clusters formed via gravitational collapse; and a CRMHD model in which an additional 10% of each SN's energy is injected as CRs. These CRs are transported anisotropically along magnetic field lines via a two-moment solver, with the CR scattering rate set by balancing Alfven-wave growth and damping based on the self-confinement paradigm. The CRMHD model develops a characteristic two-zone vertical CR profile: uniform pressure in the diffusion-dominated, high-density midplane gas, and an exponential atmosphere shaped primarily by advection and streaming in low-density extraplanar gas. The CR pressure is comparable to the total thermal gas pressure in the midplane, but is too uniform to affect gas dynamics, leaving SFRs unchanged. In contrast, the vertical CR pressure gradient at |z| > 1 kpc accelerates warm outflowing gas, resulting in an approximately 4 times higher mass loading factor than in the MHD model. CR-gas interactions increase CR energy near the midplane through compressional work, while CR streaming heats low-density warm-hot gas. TIGRESS++ opens a path toward investigating CR transport and CR-regulated ISM and outflow dynamics at high resolution across diverse galactic environments.

astro-ph.GA↗

arXiv2026

MHD Simulations of Strongly Magnetized HII Region Evolution: Evidence for Ionized Gas Filamentation

Recent JWST observations of HII regions in the Central Molecular Zone have shown a highly filamentary morphology distinct from HII regions in other parts of the galaxy. We present magnetohydrodynamic (MHD) simulations of strongly magnetized (plasma-$β$ << 1) HII region evolution that investigate and describe the formation of these ionized gas filaments. HII region evolution has been simulated in a 30 pc$^3$ box, in distinct models with pre-placed overdensities in the ambient medium and overdensities that have been generated with driven turbulence. We find that when these overdensities are seeded in the ambient medium before the birth of the ionizing source, the photoionized plasma stripped off of these dense blobs is funneled into long filaments along the magnetic field lines. The length and emission measure of these ionized gas filaments are similar to the filaments observed in the Central Molecular Zone. Given that these filaments are effectively magnetically-confined flows of photoionized gas, their density and curvature are influenced by the density of the blob and the geometry of the configuration.

astro-ph.GA↗

arXiv2025

The Co-Evolution of Stellar Wind-blown Bubbles and Photoionized Gas I: Physical Principles and a Semi-Analytic Model

We propose a new framework for the simultaneous feedback of stellar winds and photo-ionizing radiation from massive stars, distinguishing the locations where forces are applied, and consequences for internal spatio-temporal evolution of the whole feedback bubble (FB). We quantify the relative dynamical importance of wind-blown bubbles (WBB) versus the photoionized region (PIR) by the ratio of the radius at which the WBB is in pressure equilibrium with the PIR, $R_{\rm eq}$, to the Strömgren radius, $R_{\rm St}$. $ζ\equiv R_{\rm eq}/R_{\rm St}$ quantifies the dynamical dominance of WBBs ($ζ> 1$) or the PIR ($ζ< 1$). We calculate $ζ$ and find that, for momentum-driven winds, $0.1 \lesssim ζ\lesssim 1$ for the star-forming regions in (i) typical Milky Way-like giant molecular clouds (GMCs), (ii) the most massive of individual OB stars, and (iii) dense, low-metallicity environments, relevant in the early universe. In this regime, both WBBs and the PIR are dynamically important to the expansion of the FB. We develop a semi-analytic Co-Evolution Model (CEM) that takes into account the spatial distribution of forces and the back reactions of both the WBB and PIR. In the $ζ<1$ regime where the CEM is most relevant, the model differs in the total FB momentum by up to 25% compared to naive predictions. In the weak-wind limit of $ζ\ll 1$, applicable to individual OB stars or low-mass clusters, the CEM has factors $\gtrsim 2$ differences in WBB properties. In a companion paper we compare these models to three-dimensional, turbulent hydro-dynamical simulations.

astro-ph.GA↗

arXiv2025

The Co-Evolution of Stellar Wind-blown Bubbles and Photoionized Gas II: 3D RMHD Simulations and Tests of Semi-Analytic Models

In a companion paper (Paper I) we presented a Co-Evolution Model (CEM) in which to consider the evolution of feedback bubbles driven by massive stars through both stellar winds and ionizing radiation, outlining when either of these effects is dominant and providing a model for how they evolve together. Here we present results from three-dimensional radiation magneto-hydrodynamical (RMHD) simulations of this scenario for parameters typical of massive star-forming clouds in the Milky Way: precisely the regime where we expect both feedback mechanisms to matter. While we find that the CEM agrees with the simulations to within 25% for key parameters and modestly outperforms previous idealized models, disagreements remain. We show that these deviations originate mainly from the CEM's lack of (i) background inhomogeneity caused by turbulence and (ii) time-variable momentum enhancements in the wind-blown bubble (WBB). Additionally, we find that photoionized gas acts similarly to magnetic fields ([as in Lancaster et al. 2024a) by decreasing the WBB's surface area. This causes a decrease in the amount of cooling at the WBB's interface, resulting in an enhanced WBB dynamical impact.

astro-ph.GA↗

arXiv2025

A Rotational Disruption Crisis for Zodiacal Dust

A systematic torque from anisotropic radiation can rapidly spin up irregular grains to the point of breakup. We apply the standard theory of rotational disruption from radiative torques to solar system grains, finding that grains with radii $\sim$0.03 --3 $μ$m at 1 a.u. from the Sun are spun to the point of breakup on timescales $\lesssim1$ yr even when assuming them to have an unrealistically high tensile strength of pure meteoritic iron. Such a rapid disruption timescale is incompatible with both the abundance of micron-sized grains detected in the inner solar system and with the low production rate of $β$ meteoroids. We suggest the possibility that zodiacal grains have a strong propensity to attain rotational equilibrium at low angular velocity (a so-called low-$J$ attractor) and that the efficacy of rotational disruption in the Solar System -- and likely elsewhere -- has been greatly overestimated.

astro-ph.EP↗

arXiv2024

Ultraviolet Radiation Fields in Star-Forming Disk Galaxies: Numerical Simulations with TIGRESS-NCR

With numerical simulations that employ adaptive ray-tracing (ART) for radiative transfer at the same time as evolving gas magnetohydrodynamics, thermodynamics, and photochemistry, it is possible to obtain a high resolution view of ultraviolet (UV) fields and their effects in realistic models of the multiphase interstellar medium. Here, we analyze results from TIGRESS-NCR simulations, which follow both far-UV (FUV) wavelengths, important for photoelectric heating and PAH excitation, and the Lyman continuum (LyC), which photoionizes hydrogen. Considering two models, representing solar neighborhood and inner galaxy conditions, we characterize the spatial distribution and time variation of UV radiation fields, and quantify their correlations with gas. We compare four approximate models for the FUV to simulated values to evaluate alternatives when full ART is infeasible. By convolving FUV radiation with density, we produce mock maps of dust emission. We introduce a method to calibrate mid-IR observations, for example from JWST, to obtain high resolution gas surface density maps. We then consider the LyC radiation field, finding most of the gas exposed to this radiation to be in ionization-recombination equilibrium and to have a low neutral fraction. Additionally, we characterize the ionization parameter as a function of environment. Using a simplified model of the LyC radiation field, we produce synthetic maps of emission measure (EM). We show that the simplified model can be used to extract an estimate of the neutral fraction of the photoionized gas and mean free path of ionizing radiation from observed EM maps in galaxies.

astro-ph.GA↗

arXiv2024

Metallicity Dependence of Pressure-Regulated Feedback-Modulated Star Formation in the TIGRESS-NCR Simulation Suite

We present a new simulation suite for the star-forming interstellar medium (ISM) in galactic disks using the TIGRESS-NCR framework. Distinctive aspects of our simulation suite are: (1) sophisticated and comprehensive numerical treatments of essential physical processes including magnetohydrodynamics, self-gravity, and galactic differential rotation, as well as photochemistry, cooling, and heating coupled with ray-tracing UV radiation transfer and resolved supernova feedback and (2) wide parameter coverage including metallicity over $Z'\equiv Z/Z_\odot\sim0.1-3$, gas surface density $Σ_{\rm gas}\sim5-150 M_{\odot}{\rm pc^{-2}}$, and stellar surface density $Σ_{\rm star}\sim 1-50 M_{\odot}{\rm pc^{-2}}$. The range of emergent star formation rate surface density is $Σ_{\rm SFR}\sim 10^{-4}-0.5 M_{\odot}{\rm kpc^{-2}yr^{-1}}$ and ISM total midplane pressure is $P_{\rm tot}/k_B=10^3-10^6{\rm cm^{-3}K}$, with $P_{\rm tot}$ equal to the ISM weight $W$. For given $Σ_{\rm gas}$ and $Σ_{\rm star}$, we find $Σ_{\rm SFR} \propto Z'^{0.3}$. We provide an interpretation based on the pressure-regulated feedback-modulated (PRFM) star formation theory. We characterize feedback modulation in terms of the yield $Υ$, defined as the ratio of each stress to $Σ_{\rm SFR}$. The thermal feedback yield varies sensitively with both weight and metallicity as $Υ_{\rm th}\propto W^{-0.46}Z'^{-0.53}$, while the combined turbulent and magnetic feedback yield shows weaker dependence $Υ_{\rm turb+mag}\propto W^{-0.22}Z'^{-0.18}$. The reduction in $Σ_{\rm SFR}$ at low metallicity is due mainly to enhanced thermal feedback yield, resulting from reduced attenuation of UV radiation. With the metallicity-dependent calibrations we provide, PRFM theory can be used for a new subgrid star formation prescription in cosmological simulations where the ISM is unresolved.

astro-ph.GA↗

arXiv2024

Geometry, Dissipation, Cooling, and the Dynamical Evolution of Wind-Blown Bubbles

Bubbles driven by energy and mass injection from small scales are ubiquitous in astrophysical fluid systems and essential to feedback across multiple scales. In particular, O stars in young clusters produce high velocity winds that create hot bubbles in the surrounding gas. We demonstrate that the dynamical evolution of these bubbles is critically dependent upon the geometry of their interfaces with their surroundings and the nature of heat transport across these interfaces. These factors together determine the amount of energy that can be lost from the interior through cooling at the interface, which in turn determines the ability of the bubble to do work on its surroundings. We further demonstrate that the scales relevant to physical dissipation across this interface are extremely difficult to resolve in global numerical simulations of bubbles for parameter values of interest. This means the dissipation driving evolution of these bubbles in numerical simulations is often of a numerical nature. We describe the physical and numerical principles that determine the level of dissipation in these simulations; we use this, along with a fractal model for the geometry of the interfaces, to explain differences in convergence behavior between hydrodynamical and magneto-hydrodynamical simulations presented here. We additionally derive an expression for momentum as a function of bubble radius expected when the relevant dissipative scales are resolved and show that it still results in efficiently-cooled solutions as postulated in previous work.

astro-ph.GA↗

arXiv2023

Implementation of chemistry in the Athena++ code

Chemistry plays a key role in many aspects of astrophysical fluids. Atoms and molecules are agents for heating and cooling, determine the ionization fraction, serve as observational tracers, and build the molecular foundation of life. We present the implementation of a chemistry module in the publicly available magneto-hydrodynamic code Athena++. We implement several chemical networks and heating and cooling processes suitable for simulating the interstellar medium (ISM). A general chemical network framework in the KIDA format is also included, allowing the user to easily implement their own chemistry. Radiation transfer and cosmic-ray ionization are coupled with chemistry and solved with the simple six-ray approximation. The chemical and thermal processes are evolved as a system of coupled ODEs with an implicit solver from the CVODE library. We perform and present a series of tests to ensure the numerical accuracy and convergence of the code. Many tests combine chemistry with gas dynamics, including comparisons with analytic solutions, 1D problems of the photo-dissociation regions and shocks, and realistic 3D simulations of the turbulent ISM. We release the code with the new public version of Athena++, aiming to provide a robust and flexible code for the astrochemical simulation community.

astro-ph.GA↗

arXiv2023

Introducing TIGRESS-NCR: I. Co-Regulation of the Multiphase Interstellar Medium and Star Formation Rates

Massive, young stars are the main source of energy that maintains multiphase structure and turbulence in the interstellar medium (ISM), and without this "feedback" the star formation rate (SFR) would be much higher than is observed. Rapid energy loss in the ISM and efficient energy recovery by stellar feedback lead to co-regulation of SFRs and the ISM state. Realistic approaches to this problem should solve the dynamical evolution of the ISM, including star formation, and the input of feedback energy self-consistently and accurately. Here, we present the TIGRESS-NCR numerical framework, in which UV radiation, supernovae, cooling and heating processes, and gravitational collapse are modeled explicitly. We use an adaptive ray tracing method for UV radiation transfer from star clusters represented by sink particles, accounting for attenuation by dust and gas. We solve photon-driven chemical equations to determine the abundances of H (time-dependent) and C/O-bearing species (steady-state), which then set cooling and heating rates self-consistently. Applying these methods, we present high-resolution magnetohydrodynamics simulations of differentially rotating local galactic disks representing typical conditions of nearby star-forming galaxies. We analyze ISM properties and phase distributions and show good agreement with existing multiwavelength galactic observations. We measure midplane pressure components (turbulent, thermal, and magnetic) and the weight, demonstrating that vertical dynamical equilibrium holds. We quantify the ratios of pressure components to the SFR surface density, which we call the feedback yields. The TIGRESS-NCR framework will allow for a wide range of parameter exploration, including low metallicity system.

astro-ph.GA↗

arXiv2022

Physical Modeling of Dust Polarization from Magnetically Enhanced Radiative Torque (MRAT) Alignment in Protostellar Cores with POLARIS

Magnetic fields ($\textbf{B}$) are an important factor that controls the star formation process. The leading method to observe $\textbf{B}$ is using polarized thermal emission from dust grains aligned with $\textbf{B}$. However, in dense environments such as protostellar cores, dust grains may have inefficient alignment due to strong gas randomizations, so that using dust polarization to trace $\textbf{B}$ is uncertain. Hoang $\&$ Lazarian (2016) demonstrated that the grain alignment by RAdiative Torques is enhanced if dust grains contain embedded iron inclusions. Here we extend POLARIS code to study the effect of iron inclusions on grain alignment and thermal dust polarization toward a protostellar core, assuming uniform magnetic fields. We found that paramagnetic grains produce a low polarization degree of $p \sim 1\%$ in the envelope and negligible $p \ll 1\%$ in the central region due to the loss of grain alignment. In contrast, grains with a high level of iron inclusions can have perfect alignment and produce high $p \sim 40\%$ in the envelope and low $p \leq 10\%$ in the central region. Grains with a moderate level of iron inclusions induce the polarization flipping from $\textbf{P}$ $\parallel$ $\textbf{B}$ at millimeter to $\textbf{P}$ $\perp$ $\textbf{B}$ at submillimeter due to the change in the internal alignment caused by slow internal relaxation. The weak alignment of very large grains of $a \geq 10μm$ reduces the polarization by dichroic extinction at submillimeter wavelengths. We found a positive correlation between p and the level of iron inclusions, which opens a new window to constrain the abundance of irons locked in dust through dust polarimetry.

astro-ph.GA↗

arXiv2022

Photochemistry and Heating/Cooling of the Multiphase Interstellar Medium with UV Radiative Transfer for Magnetohydrodynamic Simulations

We present an efficient heating/cooling method coupled with chemistry and ultraviolet (UV) radiative transfer, which can be applied to numerical simulations of the interstellar medium (ISM). We follow the time-dependent evolution of hydrogen species (H$_2$, H, H$^+$), assume carbon/oxygen species (C, C$^+$, CO, O, and O$^+$) are in formation-destruction balance given the non-steady hydrogen abundances, and include essential heating/cooling processes needed to capture thermodynamics of all ISM phases. UV radiation from discrete point sources and the diffuse background is followed through adaptive ray tracing and a six-ray approximation, respectively, allowing for H$_2$ self-shielding; cosmic ray (CR) heating and ionization are also included. To validate our methods and demonstrate their application for a range of density, metallicity, and radiation field, we conduct a series of tests, including the equilibrium curves of thermal pressure vs. density, the chemical and thermal structure in photo-dissociation regions, H I-to-H$_2$ transitions, and the expansion of H II regions and radiative supernova remnants. Careful treatment of photochemistry and CR ionization is essential for many aspects of ISM physics, including identifying the thermal pressure at which cold and warm neutral phases co-exist. We caution that many current heating and cooling treatments used in galaxy formation simulations do not reproduce the correct thermal pressure and ionization fraction in the neutral ISM. Our new model is implemented in the MHD code Athena and incorporated in the TIGRESS simulation framework, for use in studying the star-forming ISM in a wide range of environments.

astro-ph.GA↗

arXiv2022

Slow Star Formation in the Milky Way: Theory Meets Observations

The observed star formation rate of the Milky Way can be explained by applying a metallicity-dependent factor to convert CO luminosity to molecular gas mass and a star formation efficiency per free-fall time that depends on the virial parameter of a molecular cloud. These procedures also predict the trend of star formation rate surface density with Galactocentric radius. The efficiency per free-fall time variation with virial parameter plays the major role in bringing theory into agreement with observations for the total star formation rate, while the metallicity dependence of the CO luminosity to mass conversion is most notable in the variation with Galactocentric radius. Application of these changes resolves a factor of over 100 discrepancy between observed and theoretical star formation rates that has been known for nearly 50 years.

astro-ph.GA↗

arXiv2021

Star Formation Regulation and Self-Pollution by Stellar Wind Feedback

Stellar winds contain enough energy to easily disrupt the parent cloud surrounding a nascent star cluster, and for this reason have been considered candidates for regulating star formation. However, direct observations suggest most wind power is lost, and Lancaster21a,b recently proposed that this is due to efficient mixing and cooling processes. Here, we simulate star formation with wind feedback in turbulent, self-gravitating clouds, extending our previous work. Our simulations cover clouds with initial surface density $10^2-10^4$ $M_{\odot} \, {\rm pc}^{-2}$, and show that star formation and residual gas dispersal is complete within 2 - 8 initial cloud free-fall times. The "Efficiently Cooled" model for stellar wind bubble evolution predicts enough energy is lost for the bubbles to become momentum-driven, we find this is satisfied in our simulations. We also find that wind energy losses from turbulent, radiative mixing layers dominate losses by "cloud leakage" over the timescales relevant for star formation. We show that the net star formation efficiency (SFE) in our simulations can be explained by theories that apply wind momentum to disperse cloud gas, allowing for highly inhomogeneous internal cloud structure. For very dense clouds, the SFE is similar to those observed in extreme star-forming environments. Finally, we find that, while self-pollution by wind material is insignificant in cloud conditions with moderate density (only $\lesssim 10^{-4}$ of the stellar mass originated in winds), our simulations with conditions more typical of a super star cluster have star particles that form with as much as 1\% of their mass in wind material.

astro-ph.GA↗

arXiv2021

Direct observation of orbital driven strong interlayer coupling in puckered two-dimensional PdSe2

Interlayer coupling between individual unit layers has played a critical role for layer-dependent properties in two-dimensional (2D) materials. While recent studies have revealed the significant degrees of interlayer interactions, the overall electronic structure of the 2D material has been mostly addressed by the intralayer interactions. Here, we report the direct observation of a highly dispersive single electronic band along the interlayer direction in puckered 2D PdSe2 as an experimental hallmark of strong interlayer couplings. Remarkably large band dispersion along kz-direction near Fermi level, which is even wider than the in-plane one, is observed by the angle-resolved photoemission spectroscopy measurement. Employing the X-ray absorption spectroscopy and density functional theory calculations, we reveal that the strong interlayer coupling in 2D PdSe2 originates from the unique directional bonding of Pd d orbitals associated with unexpected Pd 4d9 configuration, which consequently gives rise to the strong layer-dependency of the band gap.

cond-mat.mtrl-sci↗

arXiv2021

Efficiently Cooled Stellar Wind Bubbles in Turbulent Clouds I. Fractal Theory and Application to Star-Forming Clouds

Winds from massive stars have velocities of 1000 km/s or more, and produce hot, high pressure gas when they shock. We develop a theory for the evolution of bubbles driven by the collective winds from star clusters early in their lifetimes, which involves interaction with the turbulent, dense interstellar medium of the surrounding natal molecular cloud. A key feature is the fractal nature of the hot bubble's surface. The large area of this interface with surrounding denser gas strongly enhances energy losses from the hot interior, enabled by turbulent mixing and subsequent cooling at temperatures T = 10^4-10^5 K where radiation is maximally efficient. Due to the extreme cooling, the bubble radius scales differently (R ~ t^1/2) from the classical Weaver77 solution, and has expansion velocity and momentum lower by factors of 10-10^2 at given R, with pressure lower by factors of 10^2 - 10^3. Our theory explains the weak X-ray emission and low shell expansion velocities of observed sources. We discuss further implications of our theory for observations of the hot bubbles and cooled expanding shells created by stellar winds, and for predictions of feedback-regulated star formation in a range of environments. In a companion paper, we validate our theory with a suite of hydrodynamic simulations.

astro-ph.GA↗

arXiv2021

Efficiently Cooled Stellar Wind Bubbles in Turbulent Clouds II. Validation of Theory with Hydrodynamic Simulations

In a companion paper, we develop a theory for the evolution of stellar wind driven bubbles in dense, turbulent clouds. This theory proposes that turbulent mixing at a fractal bubble-shell interface leads to highly efficient cooling, in which the vast majority of the input wind energy is radiated away. This energy loss renders the majority of the bubble evolution momentum-driven rather than energy-driven, with expansion velocities and pressures orders of magnitude lower than in the classical Weaver77 solution. In this paper, we validate our theory with three-dimensional, hydrodynamic simulations. We show that extreme cooling is not only possible, but is generic to star formation in turbulent clouds over more than three orders of magnitude in density. We quantify the few free parameters in our theory, and show that the momentum exceeds the wind input rate by only a factor ~ 1.2-4. We verify that the bubble/cloud interface is a fractal with dimension ~ 2.5-2.7. The measured turbulent amplitude (v_t ~ 200-400 km/s) in the hot gas near the interface is shown to be consistent with theoretical requirements for turbulent diffusion to efficiently mix and radiate away most of the wind energy. The fraction of energy remaining after cooling is only 1-Θ~ 0.1-0.01, decreasing with time, explaining observations that indicate low hot-gas content and weak dynamical effects of stellar winds.

astro-ph.GA↗

arXiv2021

Star Formation Efficiency and Dispersal of Giant Molecular Clouds with UV Radiation Feedback: Dependence on Gravitational Boundedness and Magnetic Fields

Molecular clouds are supported by turbulence and magnetic fields, but quantifying their influence on cloud lifecycle and star formation efficiency (SFE) remains an open question. We perform radiation MHD simulations of star-forming giant molecular clouds (GMCs) with UV radiation feedback, in which the propagation of UV radiation via ray-tracing is coupled to hydrogen photochemistry. We consider 10 GMC models that vary in either initial virial parameter ($1\leα_{v,0}\le 5$) or dimensionless mass-to-magnetic flux ratio (0.5-8 and $\infty$); the initial mass $10^5M_{\odot}$ and radius 20pc are fixed. Each model is run with five different initial turbulence realizations. In most models, the duration of star formation and the timescale for molecular gas removal (primarily by photoevaporation) are 4-8Myr. Both the final SFE ($ε_*$) and time-averaged SFE per freefall time ($ε_{ff}$) are reduced by strong turbulence and magnetic fields. The median $ε_*$ ranges between 2.1% and 9.5%. The median $ε_{ff}$ ranges between 1.0% and 8.0% and anticorrelates with $α_{v,0}$, in qualitative agreement with previous analytic theory and simulations. However, the time-dependent $α_{v}(t)$ and $ε_{ff,obs}(t)$ based on instantaneous gas properties and cluster luminosity are positively correlated due to rapid evolution, making observational validation of star formation theory difficult. Our median $ε_{ff,obs}(t)\approx$ 2% is similar to observed values. We show that the traditional virial parameter estimates the true gravitational boundedness within a factor of 2 on average, but neglect of magnetic support and velocity anisotropy can sometimes produce large departures. Magnetically subcritical GMCs are unlikely to represent sites of massive star formation given their unrealistic columnar outflows, prolonged lifetime, and low escape fraction of radiation.

astro-ph.GA↗