arXiv subjects

Jeremy Allington-Smith

Publications and source records attributed to Jeremy Allington-Smith.

12 recordsLinked to original sources

arXiv2013

End effects in optical fibres

The performance of highly-multiplexed spectrographs is limited by focal degradation (FRD) in the optical fibres. It has already been shown that this is caused mainly by processes concentrated around the mounting points at the ends of the fibres. We use the thickness of rings produced in the farfield when a fibre is illuminated by a collimated beam, to estimate the size of the region where the FRD is generated. This requires the development of a new model, using features of existing ray-tracing and wave-based models, which fits existing data very well. The results suggest that the amount of FRD is primarily determined by the length of fibre bonded into the supporting ferrule. We point out the implications for the production of future fibre systems.

astro-ph.IM↗

arXiv2012

Applications of Integrated Photonic Spectrographs in Astronomy

One of the problems of producing instruments for Extremely Large Telescopes is that their size (and hence cost) scales rapidly with telescope aperture. To try to break this relation alternative new technologies have been proposed, such as the use of the Integrated Photonic Spectrograph (IPS). Due to their diffraction-limited nature the IPS is claimed to defeat the harsh scaling law applying to conventional instruments. In contrast to photonic applications, devices for astronomy are not usually used at the diffraction limit. Therefore to retain throughput and spatial information, the IPS requires a photonic lantern (PL) to decompose the input multimode light into single modes. This is then fed into either numerous Arrayed Waveguide Gratings (AWGs) or a conventional spectrograph. We investigate the potential advantage of using an IPS instead of conventional monolithic optics for a variety of capabilities represented by existing instruments and others planned for Extremely Large Telescopes. We show that a full IPS instrument is equivalent to an image-slicer. However, the requirement to decompose the input light into individual modes imposes a redundancy in terms of the numbers of components and detector pixels in many cases which acts to cancel out the advantage of the small size of the photonic components. However, there are specific applications where an IPS gives a potential advantage which we describe. Furthermore, the IPS approach has the potential advantage of minimising or eliminating bulk optics. We show that AWGs fed with multiple single-mode inputs from a PL require relatively bulky auxiliary optics and a 2-D detector array. A more attractive option is to combine the outputs of many AWGs so that a 1-D detector can be used to greatly reduce the number of detector pixels required and provide efficient adaptation to the curved output focal surface.

astro-ph.IM↗

arXiv2012

Simulation of complex phenomena in optical fibres

Optical fibres are essential for many types of highly-multiplexed and precision spectroscopy. The success of the new generation of multifibre instruments under construction to investigate fundamental problems in cosmology, such as the nature of dark energy, requires accurate modellisation of the fibre system to achieve their signal-to-noise goals. Despite their simple construction, fibres exhibit unexpected behaviour including non-conservation of Etendue (Focal Ratio Degradation; FRD) and modal noise. Furthermore, new fibre geometries (non-circular or tapered) have become available to improve the scrambling properties that, together with modal noise, limit the achievable SNR in precision spectroscopy. These issues have often been addressed by extensive tests on candidate fibres and their terminations but these are difficult and time-consuming. Modelling by ray-tracing and wave analysis is possible with commercial software packages but these do not address the more complex features, in particular FRD. We use a phase-tracking ray-tracing method to provide a practical description of FRD derived from our previous experimental work on circular fibres and apply it to non-standard fibres. This allows the relationship between scrambling and FRD to be quantified for the first time. We find that scrambling primarily affects the shape of the near-field pattern but has negligible effect on the barycentre. FRD helps to homogenise the nearfield pattern but does not make it completely uniform. Fibres with polygonal cross-section improve scrambling without amplifying the FRD. Elliptical fibres, in conjunction with tapering, may offer an efficient means of image slicing to improve the product of resolving power and throughput but the result is sensitive to the details of illumination.

astro-ph.IM↗

arXiv2009

Astrophotonic spectroscopy: defining the potential advantage

A photonic spectrograph can be much smaller than a conventional spectrograph with the same resolving power. Individual devices can be integrated with optical fibres to improve the multiplex gain in astronomical spectroscopy. Although experimental devices have been tested, the parameter space where integrated photonic spectrographs give a significant advantage over traditional methods has not been defined. This paper gives an overview of the theory with verification by direct simulation using Fresnel propagation and quantifies the benefit for representative spectroscopic capabilities. We thereby confirm the advantage of photonic spectrographs, especially to the next generation of Extremely Large Telescopes, and therefore conclude that these devices may be important for the future development of astronomical instrumentation.

astro-ph.IM↗

arXiv2009

Ultrafast laser inscription: an enabling technology for astrophotonics

The application of photonics to astronomy offers major advantages in the area of highly-multiplexed spectroscopy, especially when applied to extremely large telescopes. These include the suppression of the near-infrared night-sky spectrum [J. Bland-Hawthorn et al, Opt. Express 12, 5902 (2004), S. G. Leon-Saval et al, Opt. Lett. 30, 2545 (2005)] and the miniaturisation of spectrographs so that they may integrated into the light-path of individual spatial samples [J. Bland-Hawthorn et al, Proc SPIE 6269, 62690N (2006)]. Efficient collection of light from the telescope requires multimode optical fibres and three-dimensional photonic devices. We propose ultrafast laser inscription (ULI) [R. R. Thomson et al, Opt. Express 15, 11691 (2007)] as the best technology to fabricate 3D photonic devices for astrophotonic applications.

astro-ph.IM↗

arXiv2006

A multi-object, multi-field spectrometer and imager for a European ELT

One of the highlights of the European ELT Science Case book is the study of resolved stellar populations, potentially out to the Virgo Cluster of galaxies. A European ELT would enable such studies in a wide range of unexplored distant environments, in terms of both galaxy morphology and metallicity. As part of a small study, a revised science case has been used to shape the conceptual design of a multi-object, multi-field spectrometer and imager (MOMSI). Here we present an overview of some key science drivers, and how to achieve these with elements such as multiplex, AO-correction, pick-off technology and spectral resolution.

astro-ph↗

arXiv2005

GMOS IFU observations of the stellar and gaseous kinematics in the centre of NGC 1068

We present a datacube covering the central 10 arcsec of the archetypal active galaxy NGC 1068 over a wavelength range 4200 to 5400 Angstrom. obtained during the commissioning of the integral field unit (IFU) of the Gemini Multiobject Spectrograph (GMOS) installed on the Gemini-North telescope. The datacube shows a complex emission line morphology in the [OIII] doublet and Hbeta line. To describe this structure phenomenologically we construct an atlas of velocity components derived from multiple Gaussian component fits to the emission lines. The atlas contains many features which cannot be readily associated with distinct physical structures. While some components are likely to be associated with the expected biconical outflow, others are suggestive of high velocity flows or disk-like structures. As a first step towards interpretation, we seek to identify the stellar disk using kinematical maps derived from the Mgb absorption line feature at 5170 Angstrom and make associations between this and gaseous components in the atlas of emission line components.

astro-ph↗

arXiv2004

GMOS Integral Field Spectroscopy of a Merging System with Enhanced Balmer Absorption

In this paper we present the three dimensional dynamics of the galaxy SDSS J101345.39+011613.66, selected for its unusually strong Balmer absorption lines (Wo(H-delta)=7.5A). Using the GMOS-South IFU in Nod & Shuffle mode we have mapped the continuum and optical absorption lines of this z=0.1055 field galaxy. This galaxy has a disturbed morphology, with a halo of diffuse material distributed asymmetrically toward the north. Using the [OII] emission line (Wo([OII])=4.1A) we find that the gas and hot OB stars are offset from the older stars in the system. The gas also has a spatially extended and elongated morphology with a velocity gradient of 100+/-20km/s across 6kpc in projection. Using the strong H-gamma and H-delta absorption lines we find that the A- stars are widely distributed across the system and are not centrally concentrated arguing that the A-star population has formed in molecular clouds outside the nucleus. By cross correlating the spectra from the datacube with an A-star template we find evidence that the A-star population has a 40km/s shear in the same direction as the gas. The disturbed morphology, strong colour gradients and strong H-delta and H-gamma absorption lines in SDSS J101345.39 argue that this is a recent tidal interaction/merger between a passive elliptical and star-forming galaxy. Although based on a single object, these results show that we can spatially resolve and constrain the dynamics of this short lived (yet important) phase of galaxy formation in which the evolutionary process take galaxies from star-forming to their quiescent end products.

astro-ph↗

arXiv2002

The origin of [Fe II] emission in NGC 4151

The centre of NGC 4151 has been observed in the J-band with the SMIRFS integral field unit (IFU) on the UK Infrared Telescope. A map of [Fe II] emission is derived, and compared with the distributions of the optical narrow line region and radio jet. We conclude that, because the [Fe II] emission is associated more closely with the visible narrow-line region than with the radio jet, it arises mainly through photoionization of gas by collimated X-rays from the Seyfert nucleus. The velocity field and strength with respect to [Pa B] are found to be consistent with this argument. The performance of the IFU is considered briefly, and techniques for observation and data analysis are discussed.

astro-ph↗

arXiv2002

The GMOS integral field unit: first integral field spectroscopy with an 8m telescope

The Gemini Multiobject Spectrograph (GMOS) installed on the Gemini-North telescope has a facility for integral field spectroscopy over the wavelength range 0.4-1.0um. GMOS is converted to this mode by the remote insertion of an integral field unit (IFU) into the beam in place of the masks used for multiobject spectroscopy. With the IFU deployed, integral field spectroscopy is available over a fully-filled contiguous field of 5 x 7 arcsec with a sampling of 0.2 arcsec. A separate field of half the area, but otherwise identical, is also provided to aid background subtraction. The IFU contains 1500 lenslet-coupled fibres and is the largest-format fibre-based IFU yet tested on the sky and the first facility of any type for integral field spectroscopy employed on an 8/10m telescope. We describe the IFU and present results from commissioning.

astro-ph↗

arXiv2002

Multiple Integral Field Spectroscopy

Integral-field spectroscopy is the most effective method of exploiting the superb image quality of the ESO-VLT, allowing complex astrophysical processes to be probed on the angular scales currently accessible only for imaging data, but with the addition of information in the spectral dimension. We discuss science drivers and requirements for multiple deployable integral fields for spectroscopy in the near-infrared. We then describe a fully modular instrument concept which can achieve such a capability over a 5-10' field with up to 32 deployable integral fields, each fully cryogenic with 1-2.5 micron coverage at a spectral resolution of ~3000, each with a 4" x 4" field of view sampled at 0.2"/pixel to take advantage of the best K-band seeing.

astro-ph↗

arXiv1999

Multiple object and integral field near-infrared spectroscopy using fibers

We describe a new system for multiple object spectroscopy and integral field spectroscopy at near-infrared wavelengths using optical fibers. Both modes of the SMIRFS instrument have been tested at the UK Infrared Telescope with the CGS4 infrared spectrograph. The modular system includes a common optical system to image the fiber slit onto the cold slit inside the CGS4 cryostat. The multiobject mode consists of 14 interchangeable fused silica or zirconium fluoride fibers each with a field of 4 arcsec. The integral field mode consists of 72 fused silica fibers coupled with a lenslet array to give a contiguous field of 6x4 arcsec with 0.6 arcsec sampling. We describe the performance of both modes. For the multiobject mode, the feasibility and desirability of using fluoride fibers to extend the wavelength range into the K-band is discussed. For the integral field mode, the performance is compared with theoretical expectation with particular attention to the effect of Focal Ratio Degradation in the fibers. These results demonstrate the feasibility of multiobject and integral field spectroscopy in the near-infrared using lenslet-coupled fiber systems. Although SMIRFS in an experimental system working with a spectrograph not designed for this purpose, the throughput and uniformity of response are good. SMIRFS points the way forward to systems with much larger numbers of elements.

astro-ph↗