arXiv subjects

Jeremy S. Perkins

Publications and source records attributed to Jeremy S. Perkins.

At least 19 recordsLinked to original sources

arXiv2026

Foundations for Discovery: A Coordinated Fleet Approach to NASA Astrophysics

This white paper presents an analysis of Astro2020 science priorities and NASA's future astrophysics mission architecture, advocating for a coordinated fleet of \$1--2B missions, smaller than typical Flagship observatories, but strategically designed to complement them, i.e. a ``Next Generation Great Observatories" program. The study addresses opportunities in current mission planning, design, and implementation and proposes a strategic approach to maximize scientific return on investment while strengthening partnerships across NASA divisions, other government organizations, universities, and industry.

astro-ph.IM↗

arXiv2025

AstroPix: A Pixelated HVCMOS Sensor for Space-Based Gamma-Ray Measurement

A next-generation medium-energy gamma-ray telescope targeting the MeV range would address open questions in astrophysics regarding how extreme conditions accelerate cosmic-ray particles, produce relativistic jet outflows, and more. One concept, AMEGO-X, relies upon the mission-enabling CMOS Monolithic Active Pixel Sensor silicon chip AstroPix. AstroPix is designed for space-based use, featuring low noise, low power consumption, and high scalability. Desired performance of the device include an energy resolution of 5 keV (or 10% FWHM) at 122 keV and a dynamic range per-pixel of 25-700 keV, enabled by the addition of a high-voltage bias to each pixel which supports a depletion depth of 500 um. This work reports on the status of the AstroPix development process with emphasis on the current version under test, version three (v3), and highlights of version two (v2). Version 3 achieves energy resolution of 10.4 +/- 3.2% at 59.5 keV and 94 +/- 6 um depletion in a low-resistivity test silicon substrate.

astro-ph.IM↗

arXiv2025

Calibration of the ComPair Balloon Instrument

ComPair, the prototype of the All-sky Medium Energy Gamma-ray Observatory (AMEGO) mission concept, is a combined Compton imager and pair production telescope. It consists of four subsystems: a double-sided silicon strip detector (DSSD) Tracker, a virtual Frisch-grid cadmium zinc telluride (CZT) Low Energy Calorimeter, a cesium iodide (CsI) High Energy Calorimeter, and a plastic scintillator Anti-Coincidence Detector (ACD) to reject the charged particle background. These subsystems work together to reconstruct events, by tracking the locations and energies of gamma-ray scatters and pair production events. To quantify ComPair's scientific capabilities prior to a balloon launch in 2023, calibrations were performed to benchmark the instrument's performance in terms of angular resolution, energy resolution, and effective area. In this paper we provide an overview of the ComPair instrument and detail the calibration campaign. Finally, we compare our results to the expected performance based on simulations.

astro-ph.IM↗

arXiv2025

Evaluation of gamma-ray response of the AstroPix4 HV-CMOS active pixel sensor

AstroPix is a novel high-voltage CMOS active pixel sensor being developed for a next generation gamma-ray space telescope, AMEGO-X. To meet AMEGO-X instrument requirements, AstroPix must achieve full depletion of its $500~\rm{μm}$ thick, $500~\rm{μm}$-pitch pixels. It must be sensitive to gamma rays in the range of $25-700$ keV, with the energy resolution at 122 keV of $<10$%. Furthermore, given the space-based nature of AMEGO-X, the power consumption of AstroPix needs to be lower than $1.5~\rm{mW/{cm}^2}$. We report the gamma-ray response of the latest version of AstroPix, AstroPix4. The chip contains $16\times 13$ array of $500~\rm{μm}$-pitch pixels. The power consumption is estimated to be about $2~\rm{mW/{cm}^2}$, which is approximately half the power of the previous AstroPix version. The input capacitance is reduced, allowing for the detection of the 14 keV photopeak from $\rm{^{57}Co}$ and a moderate energy resolution of 14% at 122 keV. The dynamic range is estimated to be in the range from 14 keV to $\sim250$ keV. We found that the sensor depletion layer expands as expected and the measured depletion depth is approximately $90~\rm{μm}$ when biased at $-240$ V.

astro-ph.IM↗

arXiv2024

Performance evaluation of the high-voltage CMOS active pixel sensor AstroPix for gamma-ray space telescopes

AstroPix is a novel monolithic high-voltage CMOS active pixel sensor proposed for next generation medium-energy gamma-ray observatories like the All-sky Medium Energy Gamma-ray Observatory eXplorer (AMEGO-X). For AMEGO-X AstroPix must maintain a power consumption of less than $1.5~\rm{mW/{cm}^2}$ while having a pixel pitch of up to $500~\rm{μm}$. We developed the second and third versions of AstroPix, namely AstroPix2 and AstroPix3. AstroPix2 and AstroPix3 exhibit power consumptions of $3.4~\rm{mW/{cm}^2}$ and $4.1~\rm{mW/{cm}^2}$, respectively. While AstroPix2 has a pixel pitch of $250~\rm{μm}$, AstroPix3 achieves the desired size for AMEGO-X with a pixel pitch of $500~\rm{μm}$. Performance evaluation of a single pixel in an AstroPix2 chip revealed a dynamic range from 13.9 keV to 59.5 keV, with the energy resolution meeting the AMEGO-X target value ($<10\%$ (FWHM) at 60 keV). We performed energy calibration on most of the pixels in an AstroPix3 chip, yielding a mean energy resolution of 6.2 keV (FWHM) at 59.5 keV, with 44.4% of the pixels satisfying the target value. The dynamic range of AstroPix3 was assessed to span from 22.2 keV to 122.1 keV. The expansion of the depletion layer aligns with expectations in both AstroPix2 and AstroPix3. Furthermore, radiation tolerance testing was conducted on AstroPix. An AstroPix2 chip was subjected to an equivalent exposure of approximately 10 Gy from a high-intensity $\rm{^{60}Co}$ source. The chip was fully operational after irradiation although a decrease in gain by approximately 4% was observed.

astro-ph.IM↗

arXiv2024

The Double-Sided Silicon Strip Detector Tracker onboard the ComPair Balloon Flight

The ComPair balloon instrument is a prototype of the All-sky Medium Energy Gamma-ray Observatory (AMEGO) mission concept. AMEGO aims to bridge the spectral gap in sensitivity that currently exists from $\sim$100 keV to $\sim$100 MeV by being sensitive to both Compton and pair-production events. This is made possible through the use of four subsystems working together to reconstruct events: a double-sided silicon strip detector (DSSD) Tracker, a virtual Frisch grid cadmium zinc telluride (CZT) Low Energy Calorimeter, a ceasium iodide (CsI) High Energy Calorimeter, and an anti-coincidence detector (ACD) to reject charged particle backgrounds. Composed of 10 layers of DSSDs, ComPair's Tracker is designed to measure the position of photons that Compton scatter in the silicon, as well as reconstruct the tracks of electrons and positrons from pair-production as they propagate through the detector. By using these positions, as well as the absorbed energies in the Tracker and 2 Calorimeters, the energy and direction of the incident photon can be determined. This proceeding will present the development, testing, and calibration of the ComPair DSSD Tracker and early results from its balloon flight in August 2023.

astro-ph.IM↗

arXiv2024

Results from the CsI Calorimeter onboard the 2023 ComPair Balloon Flight

The ComPair gamma-ray telescope is a technology demonstrator for a future gamma-ray telescope called the All-sky Medium Energy Gamma-ray Observatory (AMEGO). The instrument is composed of four subsystems, a double-sided silicon strip detector, a virtual Frisch grid CdZnTe calorimeter, a CsI:Tl based calorimeter, and an anti-coincidence detector (ACD). The CsI calorimeter's goal is to measure the position and energy deposited from high-energy events. To demonstrate the technological readiness, the calorimeter has flown onboard a NASA scientific balloon as part of the GRAPE-ComPair mission and accumulated around 3 hours of float time at an altitude of 40 km. During the flight, the CsI calorimeter observed background radiation, Regener-Pfotzer Maximum, and several gamma-ray activation lines originating from aluminum.

astro-ph.IM↗

arXiv2023

The Compton-Pair telescope: A prototype for a next-generation MeV $γ$-ray observatory

The Compton Pair (ComPair) telescope is a prototype that aims to develop the necessary technologies for future medium energy gamma-ray missions and to design, build, and test the prototype in a gamma-ray beam and balloon flight. The ComPair team has built an instrument that consists of 4 detector subsystems: a double-sided silicon strip detector Tracker, a novel high-resolution virtual Frisch-grid cadmium zinc telluride Calorimeter, and a high-energy hodoscopic cesium iodide Calorimeter, all of which are surrounded by a plastic scintillator anti-coincidence detector. These subsystems together detect and characterize photons via Compton scattering and pair production, enable a veto of cosmic rays, and are a proof-of-concept for a space telescope with the same architecture. A future medium-energy gamma-ray mission enabled through ComPair will address many questions posed in the Astro2020 Decadal survey in both the New Messengers and New Physics and the Cosmic Ecosystems themes. In this contribution, we will give an overview of the ComPair project and steps forward to the balloon flight.

astro-ph.IM↗

arXiv2023

AstroPix: CMOS pixels in space

Space-based gamma-ray telescopes such as the Fermi Large Area Telescope have used single sided silicon strip detectors to measure the position of charged particles produced by incident gamma rays with high resolution. At energies in the Compton regime and below, two dimensional position information within a single detector is required. Double sided silicon strip detectors are one option; however, this technology is difficult to fabricate and large arrays are susceptible to noise. This work outlines the development and implementation of monolithic CMOS active pixel silicon sensors, AstroPix, for use in future gamma-ray telescopes. Based upon detectors designed using the HVCMOS process at the Karlsruhe Institute of Technology, AstroPix has the potential to maintain the high energy and angular resolution required of a medium-energy gamma-ray telescope while reducing noise with the dual detection-and-readout capabilities of a CMOS chip. The status of AstroPix development and testing as well as outlook for application in future telescopes is presented.

astro-ph.IM↗

arXiv2022

Development of the ComPair gamma-ray telescope prototype

There is a growing interest in the science uniquely enabled by observations in the MeV range, particularly in light of multi-messenger astrophysics. The Compton Pair (ComPair) telescope, a prototype of the AMEGO Probe-class concept, consists of four subsystems that together detect and characterize gamma rays in the MeV regime. A double-sided strip silicon Tracker gives a precise measure of the first Compton scatter interaction and tracks pair-conversion products. A novel cadmium zinc telluride (CZT) detector with excellent position and energy resolution beneath the Tracker detects the Compton-scattered photons. A thick cesium iodide (CsI) calorimeter contains the high-energy Compton and pair events. The instrument is surrounded by a plastic anti-coincidence (ACD) detector to veto the cosmic-ray background. In this work, we will give an overview of the science motivation and a description of the prototype development and performance.

astro-ph.IM↗

arXiv2022

AstroPix: Novel monolithic active pixel silicon sensors for future gamma-ray telescopes

Space-based gamma-ray telescopes such as the Fermi Large Area Telescope have used single sided silicon strip detectors to track secondary charged particles produced by primary gamma-rays with high resolution. At the lower energies targeted by keV-MeV telescopes, two dimensional position information within a single detector is required for event reconstruction - especially in the Compton regime. This work describes the development of monolithic CMOS active pixel silicon sensors - AstroPix - as a novel technology for use in future gamma-ray telescopes. Based upon sensors (ATLASPix) designed for use in the ATLAS detector at the Large Hadron Collider, AstroPix has the potential to maintain high performance while reducing noise with low power consumption. This is achieved with the dual detection and readout capabilities in each CMOS pixel. The status of AstroPix development and testing, as well as outlook for future testing and application, will be presented.

astro-ph.IM↗

arXiv2022

Improving the low-energy transient sensitivity of AMEGO-X using single-site events

AMEGO-X, the All-sky Medium Energy Gamma-Ray Observatory eXplorer, is a proposed instrument designed to bridge the so-called "MeV gap" by surveying the sky with unprecedented sensitivity from ~100 keV to about one GeV. This energy band is of key importance for multi-messenger and multi-wavelength studies but it is nevertheless currently under-explored. AMEGO-X addresses this situation by proposing a design capable of detecting and imaging gamma rays via both Compton interactions and pair production processes. However, some of the objects that AMEGO-X will study, such as gamma-ray bursts and magnetars, extend to energies below ~100 keV where the dominant interaction becomes photoelectric absorption. These events deposit their energy in a single pixel of the detector. In this work we show how the ~3500 cm^2 effective area of the AMEGO-X tracker to events between ~25 keV to ~100 keV will be utilized to significantly improve its sensitivity and expand the energy range for transient phenomena. Although imaging is not possible for single-site events, we show how we will localize a transient source in the sky using their aggregate signal to within a few degrees. This technique will more than double the number of cosmological gamma-ray bursts seen by AMEGO-X, allow us to detect and resolve the pulsating tails of extragalactic magnetar giant flares, and increase the number of detected less-energetic magnetar bursts -- some possibly associated with fast radio bursts. Overall, single-site events will increase the sensitive energy range, expand the science program, and promptly alert the community of fainter transient events.

astro-ph.HE↗

arXiv2022

The Future of Gamma-Ray Experiments in the MeV-EeV Range

Gamma-rays, the most energetic photons, carry information from the far reaches of extragalactic space with minimal interaction or loss of information. They bring messages about particle acceleration in environments so extreme they cannot be reproduced on earth for a closer look. Gamma-ray astrophysics is so complementary with collider work that particle physicists and astroparticle physicists are often one in the same. Gamma-ray instruments, especially the Fermi Gamma-ray Space Telescope, have been pivotal in major multi-messenger discoveries over the past decade. There is presently a great deal of interest and scientific expertise available to push forward new technologies, to plan and build space- and ground-based gamma-ray facilities, and to build multi-messenger networks with gamma rays at their core. It is therefore concerning that before the community comes together for planning exercises again, much of that infrastructure could be lost to a lack of long-term planning for support of gamma-ray astrophysics. Gamma-rays with energies from the MeV to the EeV band are therefore central to multiwavelength and multi-messenger studies to everything from astroparticle physics with compact objects, to dark matter studies with diffuse large scale structure. These goals and new discoveries have generated a wave of new gamma-ray facility proposals and programs. This paper highlights new and proposed gamma-ray technologies and facilities that have each been designed to address specific needs in the measurement of extreme astrophysical sources that probe some of the most pressing questions in fundamental physics for the next decade. The proposed instrumentation would also address the priorities laid out in the recent Astro2020 Decadal Survey, a complementary study by the astrophysics community that provides opportunities also relevant to Snowmass.

astro-ph.HE↗

arXiv2021

Multi-Resolution HEALPix Maps for Multi-Wavelength and Multi-Messenger Astronomy

HEALPix -- the Hierarchical Equal Area isoLatitude Pixelization -- has become a standard in high-energy and gravitational wave astronomy. Originally developed to improve the efficiency of all-sky Fourier analyses, it is now also utilized to share sky localization information. When used for this purpose the need for a homogeneous all-sky grid represents a limitation that hinders a broader community adoption. This work presents mhealpy, a Python library able to create, handle and analyze multi-resolution maps, a solution to this problem. It supports efficient pixel querying, arithmetic operations between maps, adaptive mesh refinement, plotting and serialization into FITS -- Flexible Image Transport System -- files. This HEALPix extension makes it suitable to represent highly resolved regions, resulting in a convenient common format to share spatial information for joint multi-wavelength and multi-messenger analyses.

astro-ph.IM↗

arXiv2019

BurstCube: Concept, Performance, and Status

The first simultaneous detection of a short gamma-ray burst (SGRB) with a gravitational-wave (GW) signal ushered in a new era of multi-messenger astronomy. In order to increase the number of SGRB-GW simultaneous detections, we need full sky coverage in the gamma-ray regime. BurstCube, a CubeSat for Gravitational Wave Counterparts, aims to expand sky coverage in order to detect and localize gamma-ray bursts (GRBs). BurstCube will be comprised of 4 Cesium Iodide scintillators coupled to arrays of Silicon photo-multipliers on a 6U CubeSat bus (a single U corresponds to cubic unit $\sim$10 cm $\times$ 10 cm $\times$ 10 cm) and will be sensitive to gamma-rays between 50 keV and 1 MeV, the ideal energy range for GRB prompt emission. BurstCube will assist current observatories, such as $Swift$ and $Fermi$, in the detection of GRBs as well as provide astronomical context to gravitational wave events detected by Advanced LIGO, Advanced Virgo, and KAGRA. BurstCube is currently in its development and testing phase to prepare for launch readiness in the fall of 2021. We present the mission concept, preliminary performance, and status.

astro-ph.IM↗

arXiv2019

Supermassive black holes at high redshifts

MeV blazars are the most luminous persistent sources in the Universe and emit most of their energy in the MeV band. These objects display very large jet powers and accretion luminosities and are known to host black holes with a mass often exceeding $10^9 M_{\odot}$. An MeV survey, performed by a new generation MeV telescope which will bridge the entire energy and sensitivity gap between the current generation of hard X-ray and gamma-ray instruments, will detect $>$1000 MeV blazars up to a redshift of $z=5-6$. Here we show that this would allow us: 1) to probe the formation and growth mechanisms of supermassive black holes at high redshifts, 2) to pinpoint the location of the emission region in powerful blazars, 3) to determine how accretion and black hole spin interplay to power the jet.

astro-ph.HE↗

arXiv2017

BurstCube: A CubeSat for Gravitational Wave Counterparts

BurstCube will detect long GRBs, attributed to the collapse of massive stars, short GRBs (sGRBs), resulting from binary neutron star mergers, as well as other gamma-ray transients in the energy range 10-1000 keV. sGRBs are of particular interest because they are predicted to be the counterparts of gravitational wave (GW) sources soon to be detectable by LIGO/Virgo. BurstCube contains 4 CsI scintillators coupled with arrays of compact low-power Silicon photomultipliers (SiPMs) on a 6U Dellingr bus, a flagship modular platform that is easily modifiable for a variety of 6U CubeSat architectures. BurstCube will complement existing facilities such as Swift and Fermi in the short term, and provide a means for GRB detection, localization, and characterization in the interim time before the next generation future gamma-ray mission flies, as well as space-qualify SiPMs and test technologies for future use on larger gamma-ray missions. The ultimate configuration of BurstCube is to have a set of $\sim10$ BurstCubes to provide all-sky coverage to GRBs for substantially lower cost than a full-scale mission.

astro-ph.IM↗

arXiv2013

A Study of the Long-term Spectral Variations of 3C 66A Observed with the Fermi and Kanata Telescopes

3C 66A is an intermediate-frequency-peaked BL Lac object detected by the Large Area Telescope onboard the Fermi Gamma-ray Space Telescope. We present a study of the long-term variations of this blazar seen over 2 years at GeV energies with Fermi and in the optical (flux and polarization) and near infrared with the Kanata telescope. In 2008, the first year of the study, we find a correlation between the gamma-ray flux and the measurements taken with the Kanata telescope. This is in contrast to the later measurements performed during 2009--2010 which show only a weak correlation along with a gradual increase of the optical flux. We calculate an external seed photon energy density assuming that the gamma-ray emission is due to external Compton scattering. The energy density of the external photons is found to be higher by a factor of two in 2008 compared to 2009--2010. We conclude that the different behaviors observed between the first year and the later years might be explained by postulating two different emission components.

astro-ph.HE↗