arXiv subjects

Jeroen van de Wijdeven

Publications and source records attributed to Jeroen van de Wijdeven.

10 recordsLinked to original sources

arXiv2026

Closed-loop Optimal Fault Detection for Uncertain Systems

Faults compromise the reliability and safety of complex engineering systems. The aim of this article is to address the problem of robust fault detection filter design for continuous-time linear time-invariant uncertain systems in open-loop or closed-loop configurations. The developed method offers a unified approach to handle parametric and dynamic uncertainties by solving a single Riccati equation, based on a worst-case disturbance and uncertainty model. This worst-case model is obtained by nonlinear optimization and application of the boundary Nevanlinna-Pick method. The efficacy of the proposed approach is demonstrated using an uncertain model of an experimental reticle stage used in the lithography industry. The results illustrate that an optimal compromise is achieved between sensitivity to faults and rejection of modelling uncertainties and disturbances on the other hand. This capability enables the clear differentiation between faults and undesired effects in residuals, thereby enhancing fault detection reliability, ultimately contributing to improved safety and performance of machines.

eess.SY↗

arXiv2026

Nullspace-based Fault Diagnosis for Closed-Loop Mechatronic Systems with Application to Semiconductor Equipment

Fault detection and isolation (FDI) systems are critical for modern mechatronic production equipment, as their continuous operation is heavily dependent on the ability to detect and isolate faults in a timely and efficient manner. The aim of this paper is to address closed-loop aspects for linear systems and enable the application of well-known nullspace-based FDI synthesis conditions to mechatronic systems subject to actuator and sensor faults. These tailored FDI synthesis conditions are applied to a large-scale prototype wafer stage, showcasing the proposed approach through real experiments, thereby underlining the usefulness of the derived synthesis conditions for a wide range of production machines and scientific instruments.

eess.SY↗

arXiv2026

Structured identification of multivariable modal systems

Physically interpretable models are essential for next-generation industrial systems, as these representations enable effective control, support design validation, and provide a foundation for monitoring strategies. The aim of this paper is to develop a system identification framework for estimating modal models of complex multivariable mechanical systems from frequency response data. To achieve this, a two-step structured identification algorithm is presented, where an additive model is first estimated using a refined instrumental variable method and subsequently projected onto a modal form. The developed identification method provides accurate, physically-relevant, minimal-order models, for both generally-damped and proportionally damped modal systems. The effectiveness of the proposed method is demonstrated through experimental validation on a prototype wafer-stage system, which features a large number of spatially distributed actuators and sensors and exhibits complex flexible dynamics.

eess.SY↗

arXiv2025

Identification of additive multivariable continuous-time systems

Multivariable parametric models are critical for designing, controlling, and optimizing the performance of engineered systems. The main aim of this paper is to develop a parametric identification strategy that delivers accurate and physically relevant models of multivariable systems using time-domain data. The introduced approach adopts an additive model structure, providing a parsimonious and interpretable representation of many physical systems, and applies a refined instrumental variable-based estimation algorithm. The developed identification method enables the estimation of multivariable parametric additive models in continuous time and is applicable to both open- and closed-loop systems. The performance of the estimator is demonstrated through numerical simulations and experimentally validated on a flexible beam system.

eess.SP↗

arXiv2025

A Direct State-Space Realization of Discrete-Time Linear Parameter-Varying Input-Output Models

A minimal state-space (SS) realization of an identified linear parameter-varying (LPV) input-output (IO) model usually introduces dynamic and nonlinear dependency of the state-space coefficient functions, complicating stability analysis and controller synthesis. The aim of this paper is to introduce and analyze a direct SS realization of this IO model that avoids this nonlinear and dynamic dependency, at the cost of introducing a nonminimal state. It is shown that this direct SS realization 1) is reachable under a coprimeness condition on the coefficient functions of the IO model and a well-posedness condition on the model order, and 2) is never observable but that the unobservable directions converge to zero in a finite amount of steps, i.e., that the realization is reconstructible. The derived results are illustrated through numerical examples in both the LPV and LTI case.

eess.SY↗

arXiv2024

Unconstrained Parameterization of Stable LPV Input-Output Models: with Application to System Identification

Ensuring stability of discrete-time (DT) linear parameter-varying (LPV) input-output (IO) models estimated via system identification methods is a challenging problem as known stability constraints can only be numerically verified, e.g., through solving Linear Matrix Inequalities. In this paper, an unconstrained DT-LPV-IO parameterization is developed which gives a stable model for any choice of model parameters. To achieve this, it is shown that all quadratically stable DT-LPV-IO models can be generated by a mapping of transformed coefficient functions that are constrained to the unit ball, i.e., a small-gain condition. The unit ball is then reparameterized through a Cayley transformation, resulting in an unconstrained parameterization of all quadratically stable DT-LPV-IO models. As a special case, an unconstrained parameterization of all stable DT linear time-invariant transfer functions is obtained. Identification using the stable DT-LPV-IO model with neural network coefficient functions is demonstrated on a simulation example of a position-varying mass-damper-spring system.

eess.SY↗

arXiv2023

Direct Learning for Parameter-Varying Feedforward Control: A Neural-Network Approach

The performance of a feedforward controller is primarily determined by the extent to which it can capture the relevant dynamics of a system. The aim of this paper is to develop an input-output linear parameter-varying (LPV) feedforward parameterization and a corresponding data-driven estimation method in which the dependency of the coefficients on the scheduling signal are learned by a neural network. The use of a neural network enables the parameterization to compensate a wide class of constant relative degree LPV systems. Efficient optimization of the neural-network-based controller is achieved through a Levenberg-Marquardt approach with analytic gradients and a pseudolinear approach generalizing Sanathanan-Koerner to the LPV case. The performance of the developed feedforward learning method is validated in a simulation study of an LPV system showing excellent performance.

eess.SY↗

arXiv2023

Learning for Precision Motion of an Interventional X-ray System: Add-on Physics-Guided Neural Network Feedforward Control

Tracking performance of physical-model-based feedforward control for interventional X-ray systems is limited by hard-to-model parasitic nonlinear dynamics, such as cable forces and nonlinear friction. In this paper, these nonlinear dynamics are compensated using a physics-guided neural network (PGNN), consisting of a physical model, embedding prior knowledge of the dynamics, in parallel with a neural network to learn hard-to-model dynamics. To ensure that the neural network learns only unmodelled effects, the neural network output in the subspace spanned by the physical model is regularized via an orthogonal projection-based approach, resulting in complementary physical model and neural network contributions. The PGNN feedforward controller reduces the tracking error of an interventional X-ray system by a factor of 5 compared to an optimally tuned physical model, successfully compensating the unmodeled parasitic dynamics.

eess.SY↗

arXiv2022

Unifying Model-Based and Neural Network Feedforward: Physics-Guided Neural Networks with Linear Autoregressive Dynamics

Unknown nonlinear dynamics often limit the tracking performance of feedforward control. The aim of this paper is to develop a feedforward control framework that can compensate these unknown nonlinear dynamics using universal function approximators. The feedforward controller is parametrized as a parallel combination of a physics-based model and a neural network, where both share the same linear autoregressive (AR) dynamics. This parametrization allows for efficient output-error optimization through Sanathanan-Koerner (SK) iterations. Within each SK-iteration, the output of the neural network is penalized in the subspace of the physics-based model through orthogonal projection-based regularization, such that the neural network captures only the unmodelled dynamics, resulting in interpretable models.

eess.SY↗

arXiv2022

Physics-Guided Neural Networks for Feedforward Control: An Orthogonal Projection-Based Approach

Unknown nonlinear dynamics can limit the performance of model-based feedforward control. The aim of this paper is to develop a feedforward control framework for systems with unknown, typically nonlinear, dynamics. To address the unknown dynamics, a physics-based feedforward model is complemented by a neural network. The neural network output in the subspace of the model is penalized through orthogonal projection. This results in uniquely identifiable model coefficients, enabling both increased performance and good generalization. The feedforward control framework is validated on a representative system with performance limiting nonlinear friction characteristics.

eess.SY↗