Searcharxiv⌕ Search

arXiv subjects

Jesús Carrete

Publications and source records attributed to Jesús Carrete.

53 records · Page 3Linked to original sources

Materials Screening for the Discovery of New Half-Heuslers: Machine Learning versus Ab Initio Methods

Machine learning (ML) is increasingly becoming a helpful tool in the search for novel functional compounds. Here we use classification via random forests to predict the stability of half-Heusler (HH) compounds, using only experimentally reported compounds as a training set. Cross-validation yields an excellent agreement between the fraction of compounds classified as stable and the actual fraction of truly stable compounds in the ICSD. The ML model is then employed to screen 71,178 different 1:1:1 compositions, yielding 481 likely stable candidates. The predicted stability of HH compounds from three previous high throughput ab initio studies is critically analyzed from the perspective of the alternative ML approach. The incomplete consistency among the three separate ab initio studies and between them and the ML predictions suggests that additional factors beyond those considered by ab initio phase stability calculations might be determinant to the stability of the compounds. Such factors can include configurational entropies and quasiharmonic contributions.

cond-mat.mtrl-sci↗

Phonon thermal transport in 2H, 4H and 6H silicon carbide from first principles

Silicon carbide (SiC) is a wide band gap semiconductor with a variety of industrial applications. Among its many useful properties is its high thermal conductivity, which makes it advantageous for thermal management applications. In this paper we present \textit{ab initio} calculations of the in-plane and cross-plane thermal conductivities, $κ_{\text{in}}$ and $κ_{\text{out}}$, of three common hexagonal polytypes of SiC: 2H, 4H and 6H. The phonon Boltzmann transport equation is solved iteratively using as input interatomic force constants determined from density functional theory. Both $κ_{\text{in}}$ and $κ_{\text{out}}$ decrease with increasing $n$ in $n$H SiC because of additional low-lying optic phonon branches. These optic branches are characterized by low phonon group velocities, and they increase the phase space for phonon-phonon scattering of acoustic modes. Also, for all $n$, $κ_{\text{in}}$ is found to be larger than $κ_{\text{out}}$ in the temperature range considered. At electron concentrations present in experimental samples, scattering of phonons by electrons is shown to be negligible except well below room temperature where it can lead to a significant reduction of the lattice thermal conductivity. This work highlights the power of \textit{ab initio} approaches in giving quantitative, predictive descriptions of thermal transport in materials. It helps explain the qualitative disagreement that exists among different sets of measured thermal conductivity data and provides information of the relative quality of samples from which measured data was obtained.

cond-mat.mtrl-sci↗

almaBTE: a solver of the space-time dependent Boltzmann transport equation for phonons in structured materials

almaBTE is a software package that solves the space- and time-dependent Boltzmann transport equation for phonons, using only ab-initio calculated quantities as inputs. The program can predictively tackle phonon transport in bulk crystals and alloys, thin films, superlattices, and multiscale structures with size features in the nm-$μ$m range. Among many other quantities, the program can output thermal conductances and effective thermal conductivities, space-resolved average temperature profiles, and heat-current distributions resolved in frequency and space. Its first-principles character makes almaBTE especially well suited to investigate novel materials and structures. This article gives an overview of the program structure and presents illustrative examples for some of its uses.

physics.comp-ph↗

Exceptionally strong phonon scattering by B substitution in cubic SiC

We use ab-initio calculations to predict the thermal conductivity of cubic SiC with different types of defects. An excellent quantitative agreement with previous experimental measurements is found. The results unveil that B$_\mathrm{C}$ substitution has a much stronger effect than any of the other defect types in 3C-SiC, including vacancies. This finding contradicts the prediction of the classical mass-difference model of impurity scattering, according to which the effects of B$_\mathrm{C}$ and N$_\mathrm{C}$ would be similar and much smaller than that of the C vacancy. The strikingly different behavior of the B$_\mathrm{C}$ defect arises from a unique pattern of resonant phonon scattering caused by the broken structural symmetry around the B impurity.

cond-mat.mtrl-sci↗

Structural Complexity and Phonon Physics in 2D Arsenenes

In the quest for stable 2D arsenic phases, four different structures have been recently claimed to be stable. We show that, due to phonon contributions, the relative stability of those structures differs from previous reports and depends crucially on temperature. We also show that one of those four phases is in fact mechanically unstable. Furthermore, our results challenge the common assumption of an inverse correlation between structural complexity and thermal conductivity. Instead, a richer picture emerges from our results, showing how harmonic interactions, anharmonicity and symmetries all play a role in modulating thermal conduction in arsenenes. More generally, our conclusions highlight how vibrational properties are an essential element to be carefully taken into account in theoretical searches for new 2D materials.

cond-mat.mtrl-sci↗

How the Chemical Composition Alone Can Predict Vibrational Free Energies and Entropies of Solids

Computing vibrational free energies ($F_{vib}$) and entropies ($S_{vib}$) has posed a long standing challenge to the high-throughput ab initio investigation of finite temperature properties of solids. Here we use machine-learning techniques to efficiently predict $F_{vib}$ and $S_{vib}$ of crystalline compounds in the Inorganic Crystal Structure Database. By employing descriptors based simply on the chemical formula and using a training set of only 300 compounds, mean absolute errors of less than 0.04 meV/K/atom (15 meV/atom) are achieved for $S_{vib}$ ($F_{vib}$), whose values are distributed within a range of 0.9 meV/K/atom (300 meV/atom.) In addition, for training sets containing fewer than 2,000 compounds the chemical formula alone is shown to perform as well as, if not better than, four other more complex descriptors previously used in the literature. The accuracy and simplicity of the approach mean that it can be advantageously used for the fast screening of phase diagrams or chemical reactions at finite temperatures.

cond-mat.mtrl-sci↗

Role of force-constant difference in phonon scattering by nano-precipitates in PbTe

We study the effect of nanoscale precipitates on lattice thermal conduction in thermoelectric PbTe using a combination of ab-initio phonon calculations and molecular dynamics. We take into account the effects of mass difference and change in force constants, and find an enhanced influence of the latter with increased precipitate concentration. As a consequence, our inclusion of the change in force constants in the calculation affords a smaller predicted optimal nano-precipitate size that minimizes the thermal conductivity. These results suggest that the phonon scattering by nanoprecipitates in thermoelectric composites could be stronger than previously thought.

cond-mat.mtrl-sci↗

Optimizing phonon scattering by nanoprecipitates in lead chalcogenides

We calculate the thermal conductivity of PbTe and PbS with seven different types of nanoprecipitates using an ab-initio-based Boltzmann transport approach. We find that precipitates with realistic size distributions can reduce the thermal conductivity well below the predictions of theoretical models assuming a single precipitate size.We explore the question of how to tune this distribution to reduce the thermal conductivity even further. The predicted minimum value is strongly correlated with the phonon spectrum of the host material and with the mass density difference between the host and the inclusions.

cond-mat.mtrl-sci↗

Unraveling the dominant phonon scattering mechanism in thermoelectric compound ZrNiSn

Determining defect types and concentrations remains a big challenge of semiconductor materials science. By using ab-initio thermal conductivity calculations we reveal that Ni/vacancy antisites, and not the previously claimed Sn/Zr antisites, are the dominant defects affecting thermal transport in half-Heusler compound ZrNiSn. Our calculations correctly predict the thermal conductivity dependence with temperature and concentration, in quantitative agreement with published experimental results. Furthermore, we find a characteristic proportionality between phonon-antisite scattering rates and the sixth power of phonon frequency, for which we provide an analytic derivation. These results suggest that thermal conductivity measurements in combination with ab-initio calculations can be used to quantitatively assess defect types and concentrations in semiconductors.

cond-mat.mtrl-sci↗

Anomalous thermal conductivity and suppression of negative thermal expansion in ScF3

The empty perovskite ScF3 exhibits negative thermal expansion up to 1100 K. We demonstrate that ab-initio calculations of temperature-dependent effective phonon spectra allow to quantitatively describe the behavior of this compound and the suppression of negative thermal expansion. Based on this result, we predict an anomalous temperature dependence of the thermal conductivity and interpret it as a general feature of the perovskite class. Finally, we comment on the fact that the suppression of negative thermal expansion at such a high temperature is beyond the reach of the quasi-harmonic approximation and we discuss this suppression based on the temperature-dependence of the mode Grüneisen parameters.

cond-mat.mtrl-sci↗

High throughput thermal conductivity of high temperature solid phases: The case of oxide and fluoride perovskites

Using finite-temperature phonon calculations and machine-learning methods, we calculate the mechanical stability of about 400 semiconducting oxides and fluorides with cubic perovskite structures at 0 K, 300 K and 1000 K. We find 92 mechanically stable compounds at high temperatures -- including 36 not mentioned in the literature so far -- for which we calculate the thermal conductivity. We demonstrate that the thermal conductivity is generally smaller in fluorides than in oxides, largely due to a lower ionic charge, and describe simple structural descriptors that are correlated with its magnitude. Furthermore, we show that the thermal conductivities of most cubic perovskites decrease more slowly than the usual $T^{-1}$ behavior. Within this set, we also screen for materials exhibiting negative thermal expansion. Finally, we describe a strategy to accelerate the discovery of mechanically stable compounds at high temperatures.

cond-mat.mtrl-sci↗

Physically founded phonon dispersions of few-layer materials, and the case of borophene

An increasing number of theoretical calculations on few-layer materials have been reporting a non-zero sound velocity for all three acoustic phonon modes. In contrast with these reports, here we show that the lowest phonon dispersion branch of atomistically described few-layer materials should be quadratic, and this can have dramatic consequencies on calculated properties, such as the thermal conductivity. By reformulating the interatomic force constants (IFC) in terms of internal coordinates, we find that a delicate balance between the IFCs is responsible for this quadraticity. This balance is hard to obtain in ab-initio calculations even if all the symmetries are numerically enforced a posteriori, but it arises naturally in our approach. We demonstrate the phenomenon in the case of borophene, where a very subtle correction to the ab-initio IFCs yields the physically correct quadratic dispersion, while leaving the rest of the spectrum virtually unmodified. Such quadraticity nevertheless has a major effect on the computed lattice thermal conductivity, which in the case of borophene changes by more than a factor 2, and reverses its anisotropy, when the subtle IFC correction is put in place.

cond-mat.mtrl-sci↗

Nanograined half-Heusler semiconductors as advanced thermoelectrics: an ab-initio high-throughput statistical study

Nanostructuring has spurred a revival in the field of direct thermoelectric energy conversion. Nanograined materials can now be synthesized with higher figures of merit (ZT) than the bulk counterparts. This leads to increased conversion efficiencies. Despite considerable effort in optimizing the known and discovering the unknown, technology still relies upon a few limited solutions. Here we perform ab-initio modeling of ZT for 75 nanograined compounds obtained by filtering down the 79,057 half-Heusler entries available in the AFLOWLIB.org repository according to electronic and thermodynamic criteria. For many of the compounds the $ZT$s are markedly above those attainable with nanograined IV and III-V semiconductors. About 15% of them may even outperform ZT~2 at high temperatures. Our analysis elucidates the origin of the advantageous thermoelectric properties found within this broad material class. We use machine learning techniques to unveil simple rules determining if a nanograined half-Heusler compound is likely to be a good thermoelectric given its chemical composition.

cond-mat.mtrl-sci↗

Low thermal conductivity and triaxial phononic anisotropy of SnSe

In this theoretical study, we investigate the origins of the very low thermal conductivity of tin selenide (SnSe) using ab-initio calculations. We obtained high-temperature lattice thermal conductivity values that are close to those of amorphous compounds. We also found a strong anisotropy between the three crystallographic axes: one of the in-plane directions conducts heat much more easily than the other. Our results are compatible with most of the experimental literature on SnSe, and differ markedly from the more isotropic values reported by a recent study.

cond-mat.mtrl-sci↗

Finding unprecedentedly low-thermal-conductivity half-Heusler semiconductors via high-throughput materials modeling

The lattice thermal conductivity (κω) is a key property for many potential applications of compounds. Discovery of materials with very low or high κω remains an experimental challenge due to high costs and time-consuming synthesis procedures. High-throughput computational pre-screening is a valuable approach for significantly reducing the set of candidate compounds. In this article, we introduce efficient methods for reliably estimating the bulk κω for a large number of compounds. The algorithms are based on a combination of machine-learning algorithms, physical insights, and automatic ab-initio calculations. We scanned approximately 79,000 half-Heusler entries in the AFLOWLIB.org database. Among the 450 mechanically stable ordered semiconductors identified, we find that κω spans more than two orders of magnitude- a much larger range than that previously thought. κω is lowest for compounds whose elements in equivalent positions have large atomic radii. We then perform a thorough screening of thermodynamical stability that allows to reduce the list to 77 systems. We can then provide a quantitative estimate of κω for this selected range of systems. Three semiconductors having κω < 5 W /(m K) are proposed for further experimental study.

cond-mat.mtrl-sci↗

Surface roughness and thermal conductivity of semiconductor nanowires: going below the Casimir limit

By explicitly considering surface roughness at the atomic level, we quantitatively show that the thermal conductivity of Si nanowires can be lower than Casimir's classical limit. However, this violation only occurs for deep surface degradation. For shallow surface roughness, the Casimir formula is shown to yield a good approximation to the phonon mean free paths and conductivity, even for nanowire diameters as thin as 2.22 nm. Our exact treatment of roughness scattering is in stark contrast with a previously proposed perturbative approach, which is found to overpredict scattering rates by an order of magnitude. The obtained results suggest that a complete theoretical understanding of some previously published experimental results is still lacking.

cond-mat.mes-hall↗

Reentrant phase behaviour for systems with competition between phase separation and self-assembly

In patchy particle systems where there is competition between the self-assembly of finite clusters and liquid-vapour phase separation, reentrant phase behaviour is observed, with the system passing from a monomeric vapour phase to a region of liquid-vapour phase coexistence and then to a vapour phase of clusters as the temperature is decreased at constant density. Here, we present a classical statistical mechanical approach to the determination of the complete phase diagram of such a system. We model the system as a van der Waals fluid, but one where the monomers can assemble into monodisperse clusters that have no attractive interactions with any of the other species. The resulting phase diagrams show a clear region of reentrance. However, for the most physically reasonable parameter values of the model, this behaviour is restricted to a certain range of density, with phase separation still persisting at high densities.

cond-mat.soft↗