Searcharxiv⌕ Search

arXiv subjects

Jesper Schou

Publications and source records attributed to Jesper Schou.

30 records · Page 2Linked to original sources

The radial gradient of the near-surface shear layer of the Sun

Helioseismology has provided unprecedented information about the internal rotation of the Sun. One of the important achievements was the discovery of two radial shear layers: one near the bottom of the convection zone (the tachocline) and one near the surface. These shear layers may be important ingredients for explaining the magnetic cycle of the Sun. We measure the logarithmic radial gradient of the rotation rate ($\rm d\lnΩ/\rm d\ln r$) near the surface of the Sun using 15 years of f mode rotational frequency splittings from the Michelson Doppler Imager (MDI) and four years of data from the Helioseismic and Magnetic Imager (HMI). We model the angular velocity of the Sun in the upper $\sim 10$ Mm as changing linearly with depth and use a multiplicative optimally localized averaging inversion to infer the gradient of the rotation rate as a function of latitude. Both the MDI and HMI data show that $\rm d\lnΩ/\rm d\ln r$ is close to $-1$ from the equator to 60$^{\circ}$ latitude and stays negative up to 75$^{\circ}$ latitude. However, the value of the gradient is different for MDI and HMI for latitudes above $60^{\circ}$. Additionally, there is a significant difference between the value of $d\lnΩ/d\ln r$ using an older and recently reprocessed MDI data for latitudes above $30^\circ$. We could reliably infer the value of $\rm d\lnΩ/\rm d\ln r$ up to 60$^{\circ}$, but not above this latitude, which will hopefully constrain theories of the near-surface shear layer and dynamo. Furthermore, the recently reprocessed MDI splitting data are more reliable than the older versions which contained clear systematic errors in the high degree f modes.

astro-ph.SR↗

Helioseismology with Solar Orbiter

The Solar Orbiter mission, to be launched in July 2017, will carry a suite of remote sensing and in-situ instruments, including the Polarimetric and Helioseismic Imager (PHI). PHI will deliver high-cadence images of the Sun in intensity and Doppler velocity suitable for carrying out novel helioseismic studies. The orbit of the Solar Orbiter spacecraft will reach a solar latitude of up to 21 deg (up to 34 deg by the end of the extended mission) and thus will enable the first local helioseismology studies of the polar regions. Here we consider an array of science objectives to be addressed by helioseismology within the baseline telemetry allocation (51 Gbit per orbit, current baseline) and within the science observing windows (baseline 3 x 10 days per orbit). A particularly important objective is the measurement of large-scale flows at high latitudes (rotation and meridional flow), which are largely unknown but play an important role in flux transport dynamos. The full range of Earth-Sun-spacecraft angles provided by the orbit will enable helioseismology from two vantage points by combining PHI with another instrument: stereoscopic helioseismology will allow the study of the deep solar interior and a better understanding of the physics of solar oscillations in both quiet Sun and sunspots. We have used a model of the PHI instrument to study its performance for helioseismology applications. As input we used a 6 hr time-series of realistic solar magneto-convection simulation (Stagger code) and the SPINOR radiative transfer code to synthesize the observables. The simulated power spectra of solar oscillations show that the instrument is suitable for helioseismology. In particular, the specified point spread function, image jitter, and photon noise are no obstacle to a successful mission.

astro-ph.SR↗

The Helioseismic and Magnetic Imager (HMI) Vector Magnetic Field Pipeline: Overview and Performance

The Helioseismic and Magnetic Imager (HMI) began near-continuous full-disk solar measurements on 1 May 2010 from the Solar Dynamics Observatory (SDO). An automated processing pipeline keeps pace with observations to produce observable quantities, including the photospheric vector magnetic field, from sequences of filtergrams. The primary 720s observables were released in mid 2010, including Stokes polarization parameters measured at six wavelengths as well as intensity, Doppler velocity, and the line-of-sight magnetic field. More advanced products, including the full vector magnetic field, are now available. Automatically identified HMI Active Region Patches (HARPs) track the location and shape of magnetic regions throughout their lifetime. The vector field is computed using the Very Fast Inversion of the Stokes Vector (VFISV) code optimized for the HMI pipeline; the remaining 180 degree azimuth ambiguity is resolved with the Minimum Energy (ME0) code. The Milne-Eddington inversion is performed on all full-disk HMI observations. The disambiguation, until recently run only on HARP regions, is now implemented for the full disk. Vector and scalar quantities in the patches are used to derive active region indices potentially useful for forecasting; the data maps and indices are collected in the SHARP data series, hmi.sharp_720s. Patches are provided in both CCD and heliographic coordinates. HMI provides continuous coverage of the vector field, but has modest spatial, spectral, and temporal resolution. Coupled with limitations of the analysis and interpretation techniques, effects of the orbital velocity, and instrument performance, the resulting measurements have a certain dynamic range and sensitivity and are subject to systematic errors and uncertainties that are characterized in this report.

astro-ph.SR↗

Helioseismic and Magnetic Imager observations of linear polarization from a loop prominence system

White-light observations by the Solar Dynamics Observatory's Helioseismic and Magnetic Imager of a loop-prominence system occurring in the aftermath of an X-class flare on 2013 May 13 near the eastern solar limb show a linearly polarized component, reaching up to $\sim$20% at an altitude of $\sim$33 Mm, about the maximal amount expected if the emission were due solely to Thomson scattering of photospheric light by the coronal material. The mass associated with the polarized component was 8.2$\times$10$^{14}$ g. At 15 Mm altitude, the brightest part of the loop was 3(+/-0.5)% linearly polarized, only about 20% of that expected from pure Thomson scattering, indicating the presence of an additional unpolarized component at wavelengths near Fe I (617.33 nm), probably thermal emission. We estimated the free electron density of the white-light loop system to possibly be as high as 1.8$\times$10$^{12}$ cm$^{-3}$.

astro-ph.SR↗

Chromospheric and Coronal Observations of Solar Flares with the Helioseismic and Magnetic Imager

We report observations of white-light ejecta in the low corona, for two X-class flares on the 2013 May 13, using data from the Helioseismic and Magnetic Imager (HMI) of the Solar Dynamics Observatory. At least two distinct kinds of sources appeared (chromospheric and coronal), in the early and later phases of flare development, in addition to the white-light footpoint sources commonly observed in the lower atmosphere. The gradual emissions have a clear identification with the classical loop-prominence system, but are brighter than expected and possibly seen here in the continuum rather than line emission. We find the HMI flux exceeds the radio/X-ray interpolation of the bremsstrahlung produced in the flare soft X-ray sources by at least one order of magnitude. This implies the participation of cooler sources that can produce free-bound continua and possibly line emission detectable by HMI. One of the early sources dynamically resembles "coronal rain", appearing at a maximum apparent height and moving toward the photosphere at an apparent constant projected speed of 134 $\pm$ 8 $\mathrm{km s^{-1}}$. Not much literature exists on the detection of optical continuum sources above the limb of the Sun by non-coronagraphic instruments, and these observations have potential implications for our basic understanding of flare development, since visible observations can in principle provide high spatial and temporal resolution.

astro-ph.SR↗

Observing Open Clusters with a Sequence of Ages with Kepler

We propose to observe with Kepler an age sequence of nearby uncrowded open clusters. The current Kepler field contains very few (only 4) somewhat distant and/or old clusters. Nearby open clusters are already well characterized from ground- and many space-based observations. Our proposal focuses on mid and upper main-sequence variables (main sequence and pre-main sequence gamma Dor or delta Scuti stars, SPB/beta Cep stars, Cepheids, or yellow supergiants), having periods of hours to days accessible by longer cadence observations. Asteroseismology for these objects to date is limited by the number of modes observable from the ground, difficulty in obtaining spectroscopic or photometric mode ID for the fainter targets that have been observed by Kepler, uncertainties in interior and initial abundances, especially for stars with abundance anomalies, uncertainties in distance/luminosity, and lack of knowledge of prior evolution history. The additional constraints of common age, distance and initial abundances in clusters will place these variables in their evolutionary context, and help unlock some of the science and reduce uncertainties for understanding star formation and stellar evolution.

astro-ph.SR↗

On the Information Content of Stellar Spectra

With the increasing quality of asteroseismic observations it is important to minimize the random and systematic errors in mode parameter estimates. To this end it is important to understand how the oscillations relate to the directly observed quantities, such as intensities and spectra, and to derived quantities, such as Doppler velocity. Here I list some of the effects we need to take into account and show an example of the impact of some of them.

astro-ph.SR↗

Precise and accurate interpolated stellar oscillation frequencies on the main sequence

High-quality data from space-based observatories present an opportunity to fit stellar models to observations of individually-identified oscillation frequencies, not just the large and small frequency separations. But such fits require the evaluation of a large number of accurate stellar models, which remains expensive. Here, we show that global-mode oscillation frequencies interpolated in a grid of stellar models are precise and accurate, at least in the neighbourhood of a solar model.

astro-ph.SR↗

Effects of Asymmetric Flows in Solar Convection on Oscillation Modes

Many helioseismic measurements suffer from substantial systematic errors. A particularly frustrating one is that time-distance measurements suffer from a large center to limb effect which looks very similar to the finite light travel time, except that the magnitude depends on the observable used and can have the opposite sign Zhao et al. (2012). This has frustrated attempts to determine the deep meridional flow in the solar convection zone, with Zhao et al. (2012) applying an ad hoc correction with little physical basis to correct the data. In this letter we propose that part of this effect can be explained by the highly asymmetrical nature of the solar granulation which results in what appears to the oscillation modes as a net radial flow, thereby imparting a phase shift on the modes as a function of observing height and thus heliocentric angle.

astro-ph.SR↗

The height of a white-light flare and its hard X-ray sources

We describe observations of a white-light flare (SOL2011-02-24T07:35:00, M3.5) close to the limb of the Sun, from which we obtain estimates of the heights of the optical continuum sources and those of the associated hard X-ray sources.For this purpose we use hard X-ray images from the Reuven Ramaty High Energy Spectroscopic Imager (RHESSI), and optical images at 6173 Åfrom the Solar Dynamics Observatory (SDO). We find that the centroids of the impulsive-phase emissions in white light and hard X-rays (30-80 keV) match closely in central distance (angular displacement from Sun center), within uncertainties of order 0.2". This directly implies a common source height for these radiations, strengthening the connection between visible flare continuum formation and the accelerated electrons. We also estimate the absolute heights of these emissions, as vertical distances from Sun center. Such a direct estimation has not been done previously, to our knowledge. Using a simultaneous 195 Åimage from the Solar-Terrestrial RElations Observatory (STEREO-B) spacecraft to identify the heliographic coordinates of the flare footpoints, we determine mean heights above the photosphere (as normally defined; τ= 1 at 5000 Å) of 305 \pm 170 km and 195 \pm 70 km, respectively, for the centroids of the hard X-ray (HXR) and white light (WL) footpoint sources of the flare. These heights are unexpectedly low in the atmosphere, and are consistent with the expected locations of τ= 1 for the 6173 Åand the ~40 keV photons observed, respectively.

astro-ph.SR↗

Earth-Affecting Solar Causes Observatory (EASCO): A mission at the Sun-Earth L5

Coronal mass ejections (CMEs) and corotating interaction regions (CIRs) as well as their source regions are important because of their space weather consequences. The current understanding of CMEs primarily comes from the Solar and Heliospheric Observatory (SOHO) and the Solar Terrestrial Relations Observatory (STEREO) missions, but these missions lacked some key measurements: STEREO did not have a magnetograph; SOHO did not have in-situ magnetometer. SOHO and other imagers such as the Solar Mass Ejection Imager (SMEI) located on the Sun-Earth line are also not well-suited to measure Earth-directed CMEs. The Earth-Affecting Solar Causes Observatory (EASCO) is a proposed mission to be located at the Sun-Earth L5 that overcomes these deficiencies. The mission concept was recently studied at the Mission Design Laboratory (MDL), NASA Goddard Space Flight Center, to see how the mission can be implemented. The study found that the scientific payload (seven remote-sensing and three in-situ instruments) can be readily accommodated and can be launched using an intermediate size vehicle; a hybrid propulsion system consisting of a Xenon ion thruster and hydrazine has been found to be adequate to place the payload at L5. Following a 2-year transfer time, a 4-year operation is considered around the next solar maximum in 2025.

astro-ph.SR↗

HMI: First results

The Helioseismic and Magnetic Imager (HMI) has just started producing data that will help determine what the sources and mechanisms of variability in the Sun's interior are. The instrument measures the Doppler shift and the polarization of the Fe I 6173 A line, on the entire solar disk at a relatively-high cadence, in order to study the oscillations and the evolution of the full vector magnetic field of the solar Photosphere. After the data are properly calibrated, they are given to a Milne-Eddington inversion code (VFISV, Borrero et al. 2010) whose purpose is to infer certain aspects of the physical conditions in the Sun's Photosphere, such as the full 3-D topology of the magnetic field and the line-of-sight velocity at the solar surface. We will briefly describe the characteristics of the inversion code, its advantages and limitations --both in the context of the model atmosphere and the actual nature of the data--, and other aspects of its performance on such a remarkable data load. Also, a cross-comparison with near-simultaneous maps from the Spectro-Polarimeter (SP) onboard Hinode will be made.

astro-ph.SR↗