SearcharxivSearch

arXiv subjects

Jessica Healey

Publications and source records attributed to Jessica Healey.

3 recordsLinked to original sources

Pneumatic Units for Logic-based Sequential Excitation (PULSE) in Wearable Haptic Devices

Soft, wearable robotic devices can deliver haptic feedback to support a wide range of tasks, such as extended reality, training various skills, and rehabilitation. Pneumatic actuation can deliver complex haptic feedback, is lightweight and compliant, and can be incorporated into textiles, making it promising for wearable applications. These soft pneumatic devices, however, typically require a valve and input for each pneumatic actuator, making it challenging to develop fully portable devices for at-home use. In this work we present a pneumatic unit for logic-based sequential excitation (PULSE). The PULSE is a flat, textile-based pneumatic actuator with embedded fluidic logic. By combining these actuators into a fluidic ring oscillator, we decreased the typical amount of required pneumatic inputs for a haptic forearm sleeve by 60%, with the ability to scale. We built the ring oscillator by optimizing design variables to reach desired periods of oscillation. We demonstrated a set of tactile stroking cues with periods ranging from 1.16 to 1.56 s and forces ranging from 1.07 to 2.04 N. We assessed the sleeve's ability to render differentiable, pleasant, and continuous haptic cues in a user study. The forearm sleeve containing PULSEs successfully delivered four directional cues and guided users to target wrist angles with fast reaction times, low overshoot amounts, and a 93.3% average accuracy of correct initial directions.

cs.HC

CASAband: Easy-to-Wear Textile Wristband using Shape Memory Alloy Actuators for Spatial and Temporal Haptic Feedback

Haptic interfaces for the wrist and forearm offer an attractive alternative to hand-worn devices as they are simple to wear, leave the hands free for interaction with the real world, and interfere minimally with natural arm motions. To be useful in real-world settings, however, such devices must balance functionality, wearability and comfort, all while being fully untethered with minimal mass and volume. In this work, we present CASAband, a haptic wristband that integrates compliant amplified shape memory alloy actuators (CASA) into a multi-layered textile wristband to deliver spatial and temporal haptic feedback. CASAband operates completely untethered, generates no noise, and has a total mass of 63 g. The device incorporates four actuators that can generate up to 1.7 N of blocked force and 3.2 mm of free displacement with an operating bandwidth ranging from 1.34-6.59 Hz depending on the applied voltage. We conducted a perceptual study and determined that users could identify the location of a single haptic cue around their wrist and discriminate among several patterned cues with over 90% accuracy on average, highlighting that CASAband can be a suitable wearable interface to deliver information for real-world guidance and navigation tasks. To highlight the potential use cases for CASAband, we conducted two demonstrations: a pick and place task where the user relied only on haptic communication from a moderator, and an outdoor pedestrian navigation task where the user relied only on directional cues on the wrist. CASAband is one of the first haptic interfaces that balances the tradeoff between form and function and presents new opportunities for haptic feedback in the real world

cs.HC

Hold 'em and Fold 'em: Towards Human-scale, Feedback-Controlled Soft Origami Robots

An underdeveloped capability in soft robotics is proprioceptive feedback control, where soft actuators can be sensed and controlled using only sensors on the robot's body. Additionally, soft actuators are often unable to support human-scale loads due to the extremely compliant materials in use. Developing both feedback control and the ability to actuate under large loads (e.g. 500 N) are key capacities required to move soft robotics into everyday applications. In this work, we independently demonstrate these key factors towards controlling and actuating human-scale loads: proprioceptive (embodied) feedback control of a soft, pneumatically-actuated origami robot; and actuation of these origami origami robots under a person's weight in an open-loop configuration. In both demonstrations, the actuators are controlled by internal fluidic pressure. Capacitive sensors patterned onto the robot provide position estimation and serve as input to a feedback controller. We demonstrate position control of a single actuator during stepped setpoints and sinusoidal trajectory following, with root mean square error (RMSE) below 4 mm. We also showcase the actuator's potential towards human-scale robotics as an "origami balance board" by joining three actuators into an open-loop controlled system with a platform that varies its height, roll, and pitch. This work contributes to the field of soft robotics by demonstrating closed-loop feedback position control without visual tracking as an input and lightweight, soft actuators that can support a person's weight. The project repository, including videos, CAD files, and ROS code, is available at https://parses-lab.github.io/kresling_control.

cs.RO