arXiv subjects

Jia Meng

Publications and source records attributed to Jia Meng.

13 recordsLinked to original sources

arXiv2026

Anti-symmetric Multimode Waveguide Grating-Assisted Narrowband MZI for Programmable Spectral Shaping Units

We present a narrowband integrated Mach-Zehnder interferometer (MZI) capable of precise transmission control within a targeted wavelength band while maintaining out-of-band transparency. This functionality enables its use as a fundamental building block for fully programmable on-chip spectral shaping. The device is implemented on a novel dual-mode (TE0/ TE1) transmission platform, where anti-symmetric multimode waveguide Bragg gratings (AM-WBGs) and asymmetric Y-branches are combined to function as an equivalent narrowband 1*2 or 2*2 coupler. Experimentally, the MZI achieves wide extinction ratio tuning 0 dB to 30 dB across a 2.5 nm bandwidth, with independent and simultaneous control of both wavelength and extinction ratio. Cascaded multiple narrowband MZIs are experimentally characterized, demonstrating independent intensity control at individual wavelengths without cross-interference. Furthermore, the device's application as a tunable, channel-selective optical blocker/passer in high-speed communication systems is experimentally validated. Compared to prior approaches relying on dual-grating-assisted contra-directional couplers, the AM-WBG-based design overcomes fundamental bandwidth limitations caused by unintended intra-waveguide coupling bands. In addition, their single-waveguide-grating structures enhance the reliability of both fabrication and spectral control, while enabling compact spiral configurations for significant miniaturization. These advantages position the proposed MZI a promising, scalable candidate for advanced spectral shaping applications.

physics.optics↗

arXiv2023

A Robust Framework of Chromosome Straightening with ViT-Patch GAN

Chromosomes carry the genetic information of humans. They exhibit non-rigid and non-articulated nature with varying degrees of curvature. Chromosome straightening is an important step for subsequent karyotype construction, pathological diagnosis and cytogenetic map development. However, robust chromosome straightening remains challenging, due to the unavailability of training images, distorted chromosome details and shapes after straightening, as well as poor generalization capability. In this paper, we propose a novel architecture, ViT-Patch GAN, consisting of a self-learned motion transformation generator and a Vision Transformer-based patch (ViT-Patch) discriminator. The generator learns the motion representation of chromosomes for straightening. With the help of the ViT-Patch discriminator, the straightened chromosomes retain more shape and banding pattern details. The experimental results show that the proposed method achieves better performance on Fréchet Inception Distance (FID), Learned Perceptual Image Patch Similarity (LPIPS) and downstream chromosome classification accuracy, and shows excellent generalization capability on a large dataset.

cs.CV↗

arXiv2022

Review of microscale dynamics of dilution-induced asphaltene precipitation under controlled mixing conditions

As the most complex and heaviest component in bitumen, asphaltene precipitation induced by solvent dilution is important in oil sands extraction to remove solids and water from bitumen froth through dilution by paraffinic solvents. This review will compare asphaltene precipitation to dilution-induced solvent shifting in aqueous systems via the ouzo effect. We attempt to highlight similarities and differences in the evolution of nanodroplets and effects from solvent mixing conditions and point out mutual experimental techniques and modeling approaches for the research of both asphaltene precipitation and nanodroplet formation. The review will start from basic concepts in both asphaltene precipitation and the ouzo effect, then move on to the effects of solvent mixing on asphaltene precipitation in bulk. After that, we will introduce advances in microfluidic systems combined with cutting-edge experimental and simulation tools for asphaltene precipitation induced under controlled mixing with solvents and a droplet formation. Such comparison will inspire more in-depth understanding and control of asphaltene precipitation and the ouzo effect in aqueous systems.

physics.flu-dyn↗

arXiv2022

Asphaltene precipitation under controlled mixing conditions in a microchamber

Solvent exchange is a controlled process for dilution-induced phase separation. This work utilizes the solvent exchange method to reveal the effect of the mixing dynamics on the asphaltene precipitation process under 20 different mixing conditions using a model system of n-heptane and asphaltene in toluene. The external mixing between the asphaltene solution and the paraffinic solvent is strictly controlled. We employed a high-spatial-resolution total internal reflection fluorescence microscope to detect asphaltene precipitates with a resolution up to 200 nm. A multiphysics model is used to simulate the evolution of the oversaturation pulse in the solvent exchange process. Based on the simulation results, we predicted the effect of the flow rate, dimension, the orientation of the microfluidic chamber, and temperature on the surface coverage and size distribution of asphaltene precipitates. The model predictions of all factors corroborate with the experimental observations. Local concentration of the solvent and shear forces are found to be the two main reasons for the change of asphaltene precipitation caused by mixing dynamics. However, the influence of thermodynamics is more critical than the mixing dynamics as temperature changes. Through a combination of experimental and simulation studies, this work illuminates the significance of the transportation process for the final morphology of asphaltene precipitates and provides an in-depth insight into the mechanism of mixing dynamics on the asphaltene precipitation. A smart mixing may be to boost new phase formation without excessive solvent consumption.

physics.flu-dyn↗

arXiv2022

Stepwise Feature Fusion: Local Guides Global

Colonoscopy, currently the most efficient and recognized colon polyp detection technology, is necessary for early screening and prevention of colorectal cancer. However, due to the varying size and complex morphological features of colonic polyps as well as the indistinct boundary between polyps and mucosa, accurate segmentation of polyps is still challenging. Deep learning has become popular for accurate polyp segmentation tasks with excellent results. However, due to the structure of polyps image and the varying shapes of polyps, it easy for existing deep learning models to overfitting the current dataset. As a result, the model may not process unseen colonoscopy data. To address this, we propose a new State-Of-The-Art model for medical image segmentation, the SSFormer, which uses a pyramid Transformer encoder to improve the generalization ability of models. Specifically, our proposed Progressive Locality Decoder can be adapted to the pyramid Transformer backbone to emphasize local features and restrict attention dispersion. The SSFormer achieves statet-of-the-art performance in both learning and generalization assessment.

eess.IV↗

arXiv2022

Size distribution of primary submicron particles and larger aggregates in solvent induced asphaltene precipitation

Asphaltene precipitation is a crucial phase separation phenomenon in the oil industry, especially in paraffinic froth treatment to extract bitumen from oil sands ores. This work reveals the formation of particles at 0.2 to 0.4 um in radius, defined as a primary sub-micron particle (PSMP), which is ubiquitous from diffusive mixing between asphaltene solution and any of 23 types of precipitants examined in our experiments. The yield and quantity of asphaltene particles are affected not only by the Hildebrand solubility parameter of the precipitants but also by the diffusion coefficients of the asphaltene solution and the precipitant. The Population Balance Model (PBM) with the Hildebrand solubility parameter has been used to model particle size distribution. Good agreement has been achieved between numerical predictions and the experimental data. It indicates that the colloid theory can describe the size distribution of PSMP and larger aggregates. Therefore, this study provides new insight into the mechanism for the dependence of yield and size distribution of the precipitated asphaltene particles on the composition of precipitants and adding inhibitors. Controlling of asphaltene yield and size distribution may be applied to the process of hydrocarbon separation or asphaltene precipitation prevention.

cond-mat.soft↗

arXiv2022

Surface microlenses for much more efficient photodegradation in water treatment

The global need for clean water requires sustainable technology for purifying contaminated water. Highly efficient solar-driven photodegradation is a sustainable strategy for wastewater treatment. In this work, we demonstrate that the photodegradation efficiency of micropollutants in water can be improved by ~2-24 times by leveraging polymeric microlenses (MLs). These microlenses (MLs) are fabricated from the in-situ polymerization of surface nanodroplets. We found that photodegradation efficiency (η) in water correlates approximately linearly with the sum of the intensity from all focal points of MLs, although no difference in the photodegradation pathway is detected from the chemical analysis of the byproducts. With the same overall power over a given surface area, η is doubled by using ordered arrays, compared to heterogeneous MLs on an unpatterned substrate. Higher η from ML arrays may be attributed to a coupled effect from the focal points on the same plane that creates high local concentrations of active species to further speed up the rate of photodegradation. As a proof-of-concept for ML-enhanced water treatment, MLs were formed on the inner wall of glass bottles that were used as containers for water to be treated. Three representative micropollutants (norfloxacin, sulfadiazine, and sulfamethoxazole) in the bottles functionalized by MLs were photodegraded by 30% to 170% faster than in normal bottles. Our findings suggest that the ML-enhanced photodegradation may lead to a highly efficient solar water purification approach without a large solar collector size. Such an approach may be particularly suitable for portable transparent bottles in remote regions.

physics.chem-ph↗

arXiv2021

A Novel Application of Image-to-Image Translation: Chromosome Straightening Framework by Learning from a Single Image

In medical imaging, chromosome straightening plays a significant role in the pathological study of chromosomes and in the development of cytogenetic maps. Whereas different approaches exist for the straightening task, typically geometric algorithms are used whose outputs are characterized by jagged edges or fragments with discontinued banding patterns. To address the flaws in the geometric algorithms, we propose a novel framework based on image-to-image translation to learn a pertinent mapping dependence for synthesizing straightened chromosomes with uninterrupted banding patterns and preserved details. In addition, to avoid the pitfall of deficient input chromosomes, we construct an augmented dataset using only one single curved chromosome image for training models. Based on this framework, we apply two popular image-to-image translation architectures, U-shape networks and conditional generative adversarial networks, to assess its efficacy. Experiments on a dataset comprised of 642 real-world chromosomes demonstrate the superiority of our framework, as compared to the geometric method in straightening performance, by rendering realistic and continued chromosome details. Furthermore, our straightened results improve the chromosome classification by 0.98%-1.39% mean accuracy.

cs.CV↗

arXiv2021

Aurora Guard: Reliable Face Anti-Spoofing via Mobile Lighting System

Face authentication on mobile end has been widely applied in various scenarios. Despite the increasing reliability of cutting-edge face authentication/verification systems to variations like blinking eye and subtle facial expression, anti-spoofing against high-resolution rendering replay of paper photos or digital videos retains as an open problem. In this paper, we propose a simple yet effective face anti-spoofing system, termed Aurora Guard (AG). Our system firstly extracts the normal cues via light reflection analysis, and then adopts an end-to-end trainable multi-task Convolutional Neural Network (CNN) to accurately recover subjects' intrinsic depth and material map to assist liveness classification, along with the light CAPTCHA checking mechanism in the regression branch to further improve the system reliability. Experiments on public Replay-Attack and CASIA datasets demonstrate the merits of our proposed method over the state-of-the-arts. We also conduct extensive experiments on a large-scale dataset containing 12,000 live and diverse spoofing samples, which further validates the generalization ability of our method in the wild.

cs.CV↗

arXiv2020

Microfluidic device coupled with total internal reflection microscopy for in situ observation of precipitation

In situ observation of precipitation or phase separation induced by solvent addition is important in studying its dynamics. Combined with optical and fluorescence microscopy, microfluidic devices have been leveraged in studying the phase separation in various materials including biominerals, nanoparticles, and inorganic crystals. However, strong scattering from the subphases in the mixture is problematic for in situ study of phase separation with high temporal and spatial resolution. In this work, we present a quasi-2D microfluidic device combined with total internal reflection microscopy as an approach for in situ observation of phase separation. The quasi-2D microfluidic device comprises of a shallow main channel and a deep side channel. Mixing between a solution in the main channel (solution A) and another solution (solution B) in the side channel is predominantly driven by diffusion due to high fluid resistance from the shallow height of the main channel, which is confirmed using fluorescence microscopy. Moreover, relying on diffusive mixing, we can control the composition of the mixture in the main channel by tuning the composition of solution B. We demonstrate the application of our method for in situ observation of asphaltene precipitation and beta-alanine crystallization.

cond-mat.soft↗

arXiv2020

Viscosity-Mediated Growth and Coalescence of Surface Nanodroplets

Solvent exchange is a simple method to produce surface nanodroplets on a substrate for a wide range of applications by displacing a solution of good solvent, poor solvent and oil (Solution A) by a poor solvent (Solution B). In this work, we show that the growth and coalescence of nanodroplets on a homogeneous surface is mediated by the viscosity of the solvent. We show that at high flow rates of viscous Solution B, the final droplet volume deviates from the scaling law that correlates final droplet volume to the flow rate of non-viscous Solution B, reported in previous work. We attribute this deviation to a two-regime growth in viscous Solution B, where transition from an initial, fast regime to a final slow regime influenced by the flow rate. Moreover, viscous solution B hinders the coalescence of growing droplets, leading to a distinct bimodal distribution of droplet size with stable nanodroplets, in contrast to a continuous size distribution of droplets in non-viscous case. We demonstrate that the group of small droplets produced in high viscosity environment may be applied for enhanced fluorescence detection with higher sensitivity and shorter response time. The finding of this work can potentially be applied for mediating the size distribution of surface nanodroplets on homogeneous surface without templates.

cond-mat.soft↗

arXiv2018

Research of migration behavior of space charge packet in polyethylene by electron beam irradiation method under the applied electric field

For accurately obtaining the relationship between the carrier mobility and the applied electric field, a new multi-layer sample has been designed. Polyvinyl fluoride (PVF) films were hot pressed on both sides of linear low density polyethylene( LLDPE) to block the charge injection from the electrode, so as to better observe the migration of irradiated electrons. The new multi-layer sample was firstly charged to form a charge packet in the electron beam (e-beam) irradiation setup. And then it was transferred to the Laser Induced Pressure Propagation (LIPP) setup to have the space charge evolution monitored under DC voltages on the order 10-70 kV/mm. The migration of the charge packet has been successfully obtained in this new multi-layer sample. By using the packet front as the reference point, the range of the average mobility of packets at a range from 0.06*10-14 to 1.02*10-14 m2/(V*s) under calibration local field. The experimental results coincide well with the curve relating charge mobility and the electric field predicted from the Gunn effect-like model.

physics.app-ph↗

arXiv2010

Collaborative Spectrum Sensing from Sparse Observations in Cognitive Radio Networks

Spectrum sensing, which aims at detecting spectrum holes, is the precondition for the implementation of cognitive radio (CR). Collaborative spectrum sensing among the cognitive radio nodes is expected to improve the ability of checking complete spectrum usage. Due to hardware limitations, each cognitive radio node can only sense a relatively narrow band of radio spectrum. Consequently, the available channel sensing information is far from being sufficient for precisely recognizing the wide range of unoccupied channels. Aiming at breaking this bottleneck, we propose to apply matrix completion and joint sparsity recovery to reduce sensing and transmitting requirements and improve sensing results. Specifically, equipped with a frequency selective filter, each cognitive radio node senses linear combinations of multiple channel information and reports them to the fusion center, where occupied channels are then decoded from the reports by using novel matrix completion and joint sparsity recovery algorithms. As a result, the number of reports sent from the CRs to the fusion center is significantly reduced. We propose two decoding approaches, one based on matrix completion and the other based on joint sparsity recovery, both of which allow exact recovery from incomplete reports. The numerical results validate the effectiveness and robustness of our approaches. In particular, in small-scale networks, the matrix completion approach achieves exact channel detection with a number of samples no more than 50% of the number of channels in the network, while joint sparsity recovery achieves similar performance in large-scale networks.

cs.IT↗