arXiv subjects

Jiachang Bi

Publications and source records attributed to Jiachang Bi.

17 recordsLinked to original sources

arXiv2026

Interface-Enhanced Superconductivity in Ultrathin TiN Proximitized by Topological Insulators

High-quality topological insulator-superconductor (TI-SC) heterostructure with an atomically sharp and well-controlled interface is crucial for realizing topological superconductivity and topological quantum qubit. In particular, many studies of TI-SC heterostructures have focused on inducing superconducting gap in the TI layer via proximity effect, while the active manipulation of superconductivity in the SC layer remains largely unexplored. In this work, we fabricated TI/TiN heterostructures using highly air-stable, ultrathin TiN films as the SC layer, and observed an interface-enhanced superconductivity that contrasts with the conventional proximity effect in superconductor-normal metal interface. Band structure measurements reveal a consistent shift of Dirac point with Tc enhancement. Interfacial charge transfer provides a plausible explanation for this shift based on the systematic analysis and is therefore a likely contributor to the observed Tc enhancement. First principles calculations elucidate the charge transfer pathways, highlighting the critical role of the interfacial BiTe (BiSe)bilayer. Our results not only provide a tunable TI-SC hybrid system with robust superconductivity at ultrathin thickness, but also offer a potential route for manipulating superconductivity in TI-SC heterostructures via interface engineering.

cond-mat.mtrl-sci↗

arXiv2025

The Rise of Refractory Transition-Metal Nitride Films for Advanced Electronics and Plasmonics

The advancement of semiconductor materials has played a crucial role in the development of electronic and optical devices. However, scaling down semiconductor devices to the nanoscale has imposed limitations on device properties due to quantum effects. Hence, the search for successor materials has become a central focus in the fields of materials science and physics. Transition-metal nitrides (TMNs) are extraordinary materials known for their outstanding stability, biocompatibility, and ability to integrate with semiconductors. Over the past few decades, TMNs have been extensively employed in various fields. However, the synthesis of single-crystal TMNs has long been challenging, hindering the advancement of their high-performance electronics and plasmonics. Fortunately, progress in film deposition techniques has enabled the successful epitaxial growth of high-quality TMN films. In comparison to reported reviews, there is a scarcity of reviews on epitaxial TMN films from the perspective of materials physics and condensed matter physics, particularly at the atomic level. Therefore, this review aims to provide a brief summary of recent progress in epitaxial growth at atomic precision, emergent physical properties (superconductivity, magnetism, ferroelectricity, and plasmon), and advanced electronic and plasmonic devices associated with epitaxial TMN films.

cond-mat.mtrl-sci↗

arXiv2024

High resistance of superconducting TiN thin films against environmental attacks

Superconductors, an essential class of functional materials, hold a vital position in both fundamental science and practical applications. However, most superconductors, including MgB$_2$, Bi$_2$Sr$_2$CaCu$_2$O$_{8+\delta}$, and FeSe, are highly sensitive to environmental attacks (such as water and moist air), hindering their wide applications. More importantly, the surface physical and chemical processes of most superconductors in various environments remain poorly understood. Here, we comprehensively investigate the high resistance of superconducting titanium nitride (TiN) epitaxial films against acid and alkali attacks. Unexpectedly, despite immersion in acid and alkaline solutions for over 7 days, the crystal structure and superconducting properties of TiN films remain stable, as demonstrated by high-resolution X-ray diffraction, electrical transport, atomic force microscopy, and scanning electron microscope. Furthermore, combining scanning transmission electron microscopy analysis with density functional theory calculations revealed the corrosion mechanisms: acid corrosions lead to the creation of numerous defects due to the substitution of Cl ions for N anions, whereas alkaline environments significantly reduce the film thickness through the stabilization of OH$^\ast$ adsorbates. Our results uncover the unexpected stability and durability of superconducting materials against environmental attacks, highlighting their potential for enhanced reliability and longevity in diverse applications.

cond-mat.supr-con↗

arXiv2024

Resilient Growth of Highly Crystalline Topological Insulator-Superconductor Heterostructure Enabled by Ex-situ Nitride Film

Highly crystalline and easily feasible topological insulator-superconductor (TI-SC) heterostructures are crucial for the development of practical topological qubit devices. The optimal superconducting layer for TI-SC heterostructures should be highly resilient against external contaminations and structurally compatible with TIs. In this study, we provide a solution to this challenge by showcasing the growth of a highly crystalline TI-SC heterostructure using refractory TiN (111) as the superconducting layer. This approach can eliminate the need for in-situ cleaving or growth. More importantly, the TiN surface shows high resilience against contaminations during air exposure, as demonstrated by the successful recyclable growth of Bi2Se3. Our findings indicate that TI-SC heterostructures based on nitride films are compatible with device fabrication techniques, paving a path to the realization of practical topological qubit devices in the future.

cond-mat.mes-hall↗

arXiv2024

Momentum-resolved electronic structures and strong electronic correlations in graphene-like nitride superconductors

Although transition-metal nitrides have been widely applied for several decades, experimental investigations of their high-resolution electronic band structures are rare due to the lack of high-quality single-crystalline samples. Here, we report on the first momentum-resolved electronic band structures of titanium nitride (TiN) films, a remarkable nitride superconductor. The measurements of crystal structures and electrical transport properties confirmed the high quality of these films. More importantly, with a combination of high-resolution angle-resolved photoelectron spectroscopy and the first-principles calculations, the extracted Coulomb interaction strength of TiN films can be as large as 8.5 eV, whereas resonant photoemission spectroscopy yields a value of 6.26 eV. These large values of Coulomb interaction strength indicate that superconducting TiN is a strongly correlated system. Our results uncover the unexpected electronic correlations in transition-metal nitrides, potentially providing a perspective not only to understand their emergent quantum states but also to develop their applications in quantum devices.

cond-mat.mtrl-sci↗

arXiv2023

Magnetism and berry phase manipulation in an emergent structure of perovskite ruthenate by (111) strain engineering

The interplay among symmetry of lattices, electronic correlations, and Berry phase of the Bloch states in solids has led to fascinating quantum phases of matter. A prototypical system is the magnetic Weyl candidate SrRuO3, where designing and creating electronic and topological properties on artificial lattice geometry is highly demanded yet remains elusive. Here, we establish an emergent trigonal structure of SrRuO3 by means of heteroepitaxial strain engineering along the [111] crystallographic axis. Distinctive from bulk, the trigonal SrRuO3 exhibits a peculiar XY-type ferromagnetic ground state, with the coexistence of high-mobility holes likely from linear Weyl bands and low-mobility electrons from normal quadratic bands as carriers. The presence of Weyl nodes are further corroborated by capturing intrinsic anomalous Hall effect, acting as momentum-space sources of Berry curvatures. The experimental observations are consistent with our first-principles calculations, shedding light on the detailed band topology of trigonal SrRuO3 with multiple pairs of Weyl nodes near the Fermi level. Our findings signify the essence of magnetism and Berry phase manipulation via lattice design and pave the way towards unveiling nontrivial correlated topological phenomena.

cond-mat.str-el↗

arXiv2023

Transformation of hexagonal Lu to cubic LuH$_{2+x}$ single-crystalline films

With the recent report of near ambient superconductivity at room temperature in the N-doped lutetium hydride (Lu-H-N) system, the understanding of cubic Lu-H compounds has attracted worldwide attention. Generally, compared to polycrystal structures with non-negligible impurities, the single-crystalline form of materials with high purity can provide an opportunity to show their hidden properties. However, the experimental synthesis of single-crystalline cubic Lu-H compounds has not been reported thus far. Here, we developed an easy way to synthesize highly pure LuH$_{2+x}$ single-crystalline films by the post-annealing of Lu single-crystalline films (purity of 99.99%) in the H$_2$ atmosphere. The crystal and electronic structures of films were characterized by X-ray diffraction, Raman spectroscopy, and electrical transport. Interestingly, Lu films are silver-white and metallic, whereas their transformed LuH$_{2+x}$ films become purple-red and insulating, indicating the formation of an unreported electronic state of Lu-H compounds possibly. Our work provides a novel route to synthesize and explore more single-crystalline Lu-H compounds.

cond-mat.mtrl-sci↗

arXiv2023

Synthesis of single-crystalline LuN films

In the nitrogen-doped lutetium hydride (Lu-H-N) system, the presence of Lu-N chemical bonds plays a key role in the emergence of possible room-temperature superconductivity at near ambient pressure. However, due to the synthesis of single-crystalline LuN being a big challenge, the understanding of LuN is insufficient thus far. Here, we report on the epitaxial growth of single-crystalline LuN films. The crystal structures of LuN films were characterized by high-resolution X-ray diffraction. The measurement of low-temperature electrical transport indicates the LuN film is semiconducting from 300 to 2 K, yielding an activation gap of $\sim$ 0.02 eV. Interestingly, negative magnetoresistances can be observed below 12 K, which can result from the defects and magnetic impurities in LuN films. Our results uncover the electronic and magnetic properties of single-crystalline LuN films.

cond-mat.mtrl-sci↗

arXiv2023

Electronic and magnetic properties of Lu and LuH$_2$

Clarifying the electronic and magnetic properties of lutetium, lutetium dihydride, and lutetium oxide is very helpful to understand the emergent phenomena in lutetium-based compounds (such as room-temperature superconductivity). However, this kind of study is still scarce at present. Here, we report on the electronic and magnetic properties of lutetium metals, lutetium dihydride powders, and lutetium oxide powders. Crystal structures and chemical compositions of these samples were characterized by X-ray diffraction and X-ray photoemission spectroscopy, respectively. Electrical transport measurements show that the resistance of lutetium has a linear behavior depending on temperature, whereas the resistance of lutetium dihydride powders is independent of temperature. More interestingly, paramagnetism-ferromagnetism-spin glass transitions were observed at near 240 and 200 K, respectively, in lutetium metals. Our work uncovered the complex magnetic properties of Lu-based compounds.

cond-mat.mtrl-sci↗

arXiv2023

Flexible but Refractory Single-Crystalline Hyperbolic Metamaterials

The fabrication of flexible single-crystalline plasmonic or photonic components in a scalable way is fundamentally important to flexible electronic and photonic devices with high speed, high energy efficiency, and high reliability. However, it remains to be a big challenge so far. Here, we have successfully synthesized flexible single-crystalline optical hyperbolic metamaterials by directly depositing refractory nitride superlattices on flexible fluoro phlogopite-mica substrates with magnetron sputtering. Interestingly, these flexible hyperbolic metamaterials show dual-band hyperbolic dispersion of dielectric constants with low dielectric losses and high figure-of-merit in the visible to near-infrared ranges. More importantly, the optical properties of these nitride-based flexible hyperbolic metamaterials show remarkable stability under either heating or bending. Therefore, the strategy developed in this work offers an easy and scalable route to fabricate flexible, high-performance, and refractory plasmonic or photonic components, which can significantly expand the applications of current electronic and photonic devices.

physics.optics↗

arXiv2021

Wafer-Scale Epitaxy of Flexible Nitride Films with Superior Plasmonic and Superconducting Performance

Transition-metal nitrides (e.g., TiN, ZrN, TaN) are incredible materials with excellent complementary-metal-oxide-semiconductor compatibility and remarkable performance in refractory plasmonics and superconducting quantum electronics. Epitaxial growth of flexible transition-metal nitride films, especially at wafer-scale, is fundamentally important for developing high-performance flexible photonics and superconducting electronics, but the study is rare thus far. This work reports the high-quality epitaxy of 2-inch titanium nitride (TiN) films on flexible fluorophlogopite-mica (F-mica) substrates via reactive magnetron sputtering. Combined measurements of spectroscopic ellipsometer and electrical transport reveal the superior plasmonic and superconducting performance of TiN/F-mica films owing to the high single crystallinity. More interestingly, the superconductivity of these flexible TiN films can be manipulated by the bending states, and enhanced superconducting critical temperature TC is observed in convex TiN films with in-plane tensile strain. Density-functional-theory calculations uncover that the strain can tune the electron-phonon interaction strength and resultant superconductivity of TiN films. This study provides a promising route towards integrating scalable single-crystalline conductive transition-metal nitride films with flexible electronics for high-performance plasmonics and superconducting electronics.

cond-mat.supr-con↗

arXiv2021

Coherent epitaxy of trilayer nickelate (Nd0.8Sr0.2)4Ni3O10 films by high-pressure magnetron sputtering

Rare-earth (R) nickelates (such as perovskite RNiO3, trilayer R4Ni3O10, and infinite layer RNiO2) have attracted tremendous interest very recently. However, unlike widely studied RNiO3 and RNiO2 films, the synthesis of trilayer nickelate R4Ni3O10 films is rarely reported. Here, single-crystalline (Nd0.8Sr0.2)4Ni3O10 epitaxial films were coherently grown on SrTiO3 substrates by high-pressure magnetron sputtering. The crystal and electronic structures of (Nd0.8Sr0.2)4Ni3O10 films were characterized by high-resolution X-ray diffraction and X-ray photoemission spectroscopy, respectively. The electrical transport measurements reveal a metal-insulator transition near 82 K and negative magnetoresistance in (Nd0.8Sr0.2)4Ni3O10 films. Our work provides a novel route to synthesize high-quality trilayer nickelate R4Ni3O10 films.

cond-mat.mtrl-sci↗

arXiv2021

One-step epitaxy of high-mobility La-doped BaSnO3 films by high-pressure magnetron sputtering

As a unique perovskite transparent oxide semiconductor, high-mobility La-doped BaSnO3 films have been successfully synthesized by molecular beam epitaxy and pulsed laser deposition. However, it remains a big challenge for magnetron sputtering, a widely applied technique suitable for large-scale fabrication, to grow high-mobility La-doped BaSnO3 films. Here, we developed a method to synthesize high-mobility epitaxial La-doped BaSnO3 films (mobility up to 121 cm2V-1s-1 at the carrier density ~ 4.0 x 10^20 cm-3 at room temperature) directly on SrTiO3 single crystal substrates using high-pressure magnetron sputtering. The structural and electrical properties of the La-doped BaSnO3 films were characterized by combined high-resolution X-ray diffraction, X-ray photoemission spectroscopy, and temperature-dependent electrical transport measurements. The room temperature electron mobility of La-doped BaSnO3 films in this work is 2 to 4 times higher than the reported values of the films grown by magnetron sputtering. Moreover, in the high carrier density range (n > 3 x 10^20 cm-3), the electron mobility value of 121 cm2V-1s-1 in our work is among the highest values for all reported doped BaSnO3 films. It is revealed that high argon pressure during sputtering plays a vital role in stabilizing the fully relaxed films and inducing oxygen vacancies, which benefit the high mobility at room temperature. Our work provides an easy and economical way to massively synthesize high-mobility transparent conducting films for transparent electronics.

cond-mat.mtrl-sci↗

arXiv2021

Crystal orientation-dependent oxidation of epitaxial TiN films with tunable plasmonics

Titanium nitride (TiN) is a paradigm of refractory transition metal nitrides with great potential in vast applications. Generally, the plasmonic performance of TiN can be tuned by oxidation, which was thought to be only temperature-, oxygen partial pressure-, and time-dependent. Regarding the role of crystallographic orientation in the oxidation and resultant optical properties of TiN films, little is known thus far. Here we reveal that both the oxidation resistance behavior and the plasmonic performance of epitaxial TiN films follow the order of (001) < (110) < (111). The effects of crystallographic orientation on the lattice constants, optical properties, and oxidation levels of epitaxial TiN films have been systematically studied by combined high-resolution X-ray diffraction, spectroscopic ellipsometry, X-ray absorption spectroscopy, and X-ray photoemission spectroscopy. To further understand the role of crystallographic orientation in the initial oxidation process of TiN films, density-functional-theory calculations are carried out, indicating the energy cost of oxidation is (001) < (110) < (111), consistent with the experiments. The superior endurance of the (111) orientation against mild oxidation can largely alleviate the previously stringent technical requirements for the growth of TiN films with high plasmonic performance. The crystallographic orientation can also offer an effective controlling parameter to design TiN-based plasmonic devices with desired peculiarity, e.g., superior chemical stability against mild oxidation or large optical tunability upon oxidation.

cond-mat.mtrl-sci↗

arXiv2020

Creating and manipulating interfacial spin with giant magnetic response in 4$f$ antiferromagnets

Creating and manipulating spin polarization in low-dimensional electron systems (such as two-dimensional electron gases) is fundamentally essential for spintronic applications, which is yet a challenge to date. In this work, we establish the metamagnetic phase diagram of 4$f$ antiferromagnetic TbScO$_3$ and reveal its giant magnetic response to sub-tesla magnetic field, which has not been reported thus far. Utilizing this giant magnetic response, we demonstrate that the spin polarization of two-dimensional electron gas in SrTiO$_3$/LaTiO$_3$/TbScO$_3$ heterostructure can be manipulated successfully in aid of interfacial 3\textit{d}-4\textit{f} exchange interaction. Remarkably, the hysteretic magnetoresistances of two-dimensional electron gas at the SrTiO$_3$/LaTiO$_3$ interface are entirely determined by the metamagnetic phase transitions of the underlying TbScO$_3$ substrate. Our results pave a novel route to engineer the spin polarization of low-dimensional electron systems in 4$f$ antiferromagnet-based heterostructures.

cond-mat.str-el↗

arXiv2019

Unconventional crystal field splitting in non-centrosymmetric BaTiO$_3$ thin films

Understanding the crystal field splitting and orbital polarization in non-centrosymmetric systems such as ferroelectric materials is fundamentally important. In this study, taking BaTiO$_3$ (BTO) as a representative material we investigate titanium crystal field splitting and orbital polarization in non-centrosymmetric TiO$_6$ octahedra with resonant X-ray linear dichroism at Ti $L_{2,3}$-edge. The high-quality BaTiO$_3$ thin films were deposited on DyScO$_3$ (110) single crystal substrates in a layer-by-layer way by pulsed laser deposition. The reflection high-energy electron diffraction (RHEED) and element specific X-ray absorption spectroscopy (XAS) were performed to characterize the structural and electronic properties of the films. In sharp contrast to conventional crystal field splitting and orbital configuration ($d_{xz}$/$d_{yz}$ $<$ $d_{xy}$ $<$ $d_{3z^2-r^2}$ $<$ $d_{x^2-y^2}$ or $d_{xy}$ $<$ $d_{xz}$/$d_{yz}$ $<$ $d_{x^2-y^2}$ $<$ $d_{3z^2-r^2}$) according to Jahn-Teller effect, it is revealed that $d_{xz}$, $d_{yz}$, and $d_{xy}$ orbitals are nearly degenerate, whereas $d_{3z^2-r^2}$ and $d_{x^2-y^2}$ orbitals are split with an energy gap $\sim$ 100 meV in the epitaxial BTO films. The unexpected degenerate states $d_{xz}$/$d_{yz}$/$d_{xy}$ are coupled to Ti-O displacements resulting from competition between polar and Jahn-Teller distortions in non-centrosymmetric TiO$_6$ octhedra of BTO films. Our results provide a route to manipulate orbital degree of freedom by switching electric polarization in ferroelectric materials.

cond-mat.str-el↗

arXiv2018

Metallic interfaces in a CaTiO$_3$/LaTiO$_3$ heterostructure

Almost all oxide two-dimensional electron gases are formed in SrTiO$_3$-based heterostructures and the study of non-SrTiO$_3$ systems is extremely rare. Here, we report the realization of a two-dimensional electron gas in a CaTiO$_3$-based heterostructure, CaTiO$_3$/LaTiO$_3$, grown epitaxially layer-by-layer on a NdGaO$_3$ (110) substrate via pulsed laser deposition. The high quality of the crystal and electronic structures are characterized by in-situ reflection high-energy electron diffraction, X-ray diffraction, and X-ray photoemission spectroscopy. Measurement of electrical transport validates the formation of a two-dimensional electron gas in the CaTiO$_3$/LaTiO$_3$ superlattice. It is revealed the room-temperature carrier mobility in CaTiO$_3$/LaTiO$_3$ is nearly 3 times higher than in CaTiO$_3$/YTiO$_3$, demonstrating the effect of TiO$_6$ octahedral tilts and rotations on carrier mobility of two-dimensional electron gases. Due to doped CaTiO$_3$ being an A-site polar metal, our results provide a new route to design novel A-site two-dimensional polar metals.

cond-mat.mtrl-sci↗