arXiv subjects

Jiahao Shen

Publications and source records attributed to Jiahao Shen.

9 recordsLinked to original sources

arXiv2026

Prespecified-Performance Kinematic Tracking Control for Aerial Manipulation

This paper studies the kinematic tracking control problem for aerial manipulators. Existing kinematic tracking control methods, which typically employ proportional-derivative feedback or tracking-error-based feedback strategies, may fail to achieve tracking objectives within specified time constraints. To address this limitation, we propose a novel control framework comprising two key components: end-effector tracking control based on a user-defined preset trajectory and quadratic programming-based reference allocation. Compared with state-of-the-art approaches, the proposed method has several attractive features. First, it ensures that the end-effector reaches the desired position within a preset time while keeping the tracking error within a performance envelope that reflects task requirements. Second, quadratic programming is employed to allocate the references of the quadcopter base and the Delta arm, while considering the physical constraints of the aerial manipulator, thus preventing solutions that may violate physical limitations. The proposed approach is validated through three experiments. Experimental results demonstrate the effectiveness of the proposed algorithm and its capability to guarantee that the target position is reached within the preset time.

cs.RO↗

arXiv2025

PreGME: Prescribed Performance Control of Aerial Manipulators based on Variable-Gain ESO

An aerial manipulator, comprising a multirotor base and a robotic arm, is subject to significant dynamic coupling between these two components. Therefore, achieving precise and robust motion control is a challenging yet important objective. Here, we propose a novel prescribed performance motion control framework based on variable-gain extended state observers (ESOs), referred to as PreGME. The method includes variable-gain ESOs for real-time estimation of dynamic coupling and a prescribed performance flight control that incorporates error trajectory constraints. Compared with existing methods, the proposed approach exhibits the following two characteristics. First, the adopted variable-gain ESOs can accurately estimate rapidly varying dynamic coupling. This enables the proposed method to handle manipulation tasks that require aggressive motion of the robotic arm. Second, by prescribing the performance, a preset error trajectory is generated to guide the system evolution along this trajectory. This strategy allows the proposed method to ensure the tracking error remains within the prescribed performance envelope, thereby achieving high-precision control. Experiments on a real platform, including aerial staff twirling, aerial mixology, and aerial cart-pulling experiments, are conducted to validate the effectiveness of the proposed method. Experimental results demonstrate that even under the dynamic coupling caused by rapid robotic arm motion (end-effector velocity: 1.02 m/s, acceleration: 5.10 m/s$^2$), the proposed method achieves high tracking performance.

cs.RO↗

arXiv2025

Predictive Kinematic Coordinate Control for Aerial Manipulators based on Modified Kinematics Learning

High-precision manipulation has always been a developmental goal for aerial manipulators. This paper investigates the kinematic coordinate control issue in aerial manipulators. We propose a predictive kinematic coordinate control method, which includes a learning-based modified kinematic model and a model predictive control (MPC) scheme based on weight allocation. Compared to existing methods, our proposed approach offers several attractive features. First, the kinematic model incorporates closed-loop dynamics characteristics and online residual learning. Compared to methods that do not consider closed-loop dynamics and residuals, our proposed method has improved accuracy by 59.6$\%$. Second, a MPC scheme that considers weight allocation has been proposed, which can coordinate the motion strategies of quadcopters and manipulators. Compared to methods that do not consider weight allocation, the proposed method can meet the requirements of more tasks. The proposed approach is verified through complex trajectory tracking and moving target tracking experiments. The results validate the effectiveness of the proposed method.

cs.RO↗

arXiv2024

Avian-Inspired High-Precision Tracking Control for Aerial Manipulators

Aerial manipulators, composed of multirotors and robotic arms, have a structure and function highly reminiscent of avian species. This paper studies the tracking control problem for aerial manipulators. This paper studies the tracking control problem for aerial manipulators. We propose an avian-inspired aerial manipulation system, which includes an avian-inspired robotic arm design, a Recursive Newton-Euler (RNE) method-based nonlinear flight controller, and a coordinated controller with two modes. Compared to existing methods, our proposed approach offers several attractive features. First, the morphological characteristics of avian species are used to determine the size proportion of the multirotor and the robotic arm in the aerial manipulator. Second, the dynamic coupling of the aerial manipulator is addressed by the RNE-based flight controller and a dual-mode coordinated controller. Specifically, under our proposed algorithm, the aerial manipulator can stabilize the end-effector's pose, similar to avian head stabilization. The proposed approach is verified through three numerical experiments. The results show that even when the quadcopter is disturbed by different forces, the position error of the end-effector achieves millimeter-level accuracy, and the attitude error remains within 1 degree. The limitation of this work is not considering aggressive manipulation like that seen in birds. Addressing this through future studies that explore real-world experiments will be a key direction for research.

cs.RO↗

arXiv2024

Evaluation of Pedestrian Safety in a High-Fidelity Simulation Environment Framework

Pedestrians' safety is a crucial factor in assessing autonomous driving scenarios. However, pedestrian safety evaluation is rarely considered by existing autonomous driving simulation platforms. This paper proposes a pedestrian safety evaluation method for autonomous driving, in which not only the collision events but also the conflict events together with the characteristics of pedestrians are fully considered. Moreover, to apply the pedestrian safety evaluation system, we construct a high-fidelity simulation framework embedded with pedestrian safety-critical characteristics. We demonstrate our simulation framework and pedestrian safety evaluation with a comparative experiment with two kinds of autonomous driving perception algorithms -- single-vehicle perception and vehicle-to-infrastructure (V2I) cooperative perception. The results show that our framework can evaluate different autonomous driving algorithms with detailed and quantitative pedestrian safety indexes. To this end, the proposed simulation method and framework can be used to access different autonomous driving algorithms and evaluate pedestrians' safety performance in future autonomous driving simulations, which can inspire more pedestrian-friendly autonomous driving algorithms.

cs.AI↗

arXiv2023

An optimized quantum minimum searching algorithm with sure-success probability and its experiment simulation with Cirq

Finding a minimum is an essential part of mathematical models, and it plays an important role in some optimization problems. Durr and Hoyer proposed a quantum searching algorithm (DHA), with a certain probability of success, to achieve quadratic speed than classical ones. In this paper, we propose an optimized quantum minimum searching algorithm with sure-success probability, which utilizes Grover-Long searching to implement the optimal exact searching, and the dynamic strategy to reduce the iterations of our algorithm. Besides, we optimize the oracle circuit to reduce the number of gates by the simplified rules. The performance evaluation including the theoretical success rate and computational complexity shows that our algorithm has higher accuracy and efficiency than DHA algorithm. Finally, a simulation experiment based on Cirq is performed to verify its feasibility.

cs.ET↗

arXiv2023

Motion Planning for Aerial Pick-and-Place based on Geometric Feasibility Constraints

This paper studies the motion planning problem of the pick-and-place of an aerial manipulator that consists of a quadcopter flying base and a Delta arm. We propose a novel partially decoupled motion planning framework to solve this problem. Compared to the state-of-the-art approaches, the proposed one has two novel features. First, it does not suffer from increased computation in high-dimensional configuration spaces. That is because it calculates the trajectories of the quadcopter base and the end-effector separately in the Cartesian space based on proposed geometric feasibility constraints. The geometric feasibility constraints can ensure the resulting trajectories satisfy the aerial manipulator's geometry. Second, collision avoidance for the Delta arm is achieved through an iterative approach based on a pinhole mapping method, so that the feasible trajectory can be found in an efficient manner. The proposed approach is verified by three experiments on a real aerial manipulation platform. The experimental results show the effectiveness of the proposed method for the aerial pick-and-place task.

cs.RO↗

arXiv2022

Efficient Cavity Searching for Gene Network of Influenza A Virus

High order structures (cavities and cliques) of the gene network of influenza A virus reveal tight associations among viruses during evolution and are key signals that indicate viral cross-species infection and cause pandemics. As indicators for sensing the dynamic changes of viral genes, these higher order structures have been the focus of attention in the field of virology. However, the size of the viral gene network is usually huge, and searching these structures in the networks introduces unacceptable delay. To mitigate this issue, in this paper, we propose a simple-yet-effective model named HyperSearch based on deep learning to search cavities in a computable complex network for influenza virus genetics. Extensive experiments conducted on a public influenza virus dataset demonstrate the effectiveness of HyperSearch over other advanced deep-learning methods without any elaborated model crafting. Moreover, HyperSearch can finish the search works in minutes while 0-1 programming takes days. Since the proposed method is simple and easy to be transferred to other complex networks, HyperSearch has the potential to facilitate the monitoring of dynamic changes in viral genes and help humans keep up with the pace of virus mutations.

q-bio.GN↗

arXiv2020

Polar state of 0.67BiFeO3-0.33BaTiO3 near the morphotropic phase boundary

The symmetric studies on the structure-property relationship of the unpoled and poled states of 0.67BiFeO3-0.33BaTiO3 (0.67BF-0.33BT) were conducted to understand the origin of the morphotropic phase boundary (MPB) in BF-BT. A typical relaxor-type dielectric anomaly was observed (Tf, ~627 K). The remnant polarization (Pr) and maximum value of electro-strain (Sm) increase clearly during heating (Pr, ~40 uC/cm2; Sm, 0.191 % under 40 kV/cm at 453 K). The first-cycle electro-strain loops indicate the difference in the polar state between 0.67BF-0.33BT and 0.94BiNaTiO3-0.06BaTiO3. Both the unpoled and poled samples have the similar frequency dispersion behaviors. Even in the poled samples, the transition between the ergodic relaxor state and ferroelectric-like state does not involve a clear dielectric anomaly. Analyses based on the Rietveld refinement of XRD patterns, bright-field images and selected-area electron diffractions (SAED) demonstrated that the formation of the long-range ferroelectric domains was difficult under the poling field.

cond-mat.mtrl-sci↗