arXiv subjects

Jiajun Qin

Publications and source records attributed to Jiajun Qin.

12 recordsLinked to original sources

arXiv2026

New energy conversion system based on charge-exchange and inner-shell electron transitions

The rapidly growing demand for compact, high-energy power sources has outpaced the capabilities of conventional electrochemical systems that rely on outer-shell redox reactions. In this work, we present a new energy platform that utilizes inner-shell electron transitions that are previously inaccessible due to their high energy thresholds. By leveraging charge exchange processes between bare argon ions (Ar^18+) and neutral helium atoms, we provide clear evidence for the emission of soft X-ray and extreme-ultraviolet photons across a broad spectra range, resulting from inner-shell electron capture and cascade de-excitation. This strategy overcomes the limitations of radiative recombination by enhancing photon energy utilization through broader emission profiles more compatible with practical energy converters. Our design of a helium-filled chamber design enables precise control of output via pressure tuning, achieving a remarkable radiation power density of 6.29*10^8 W L^-1 and an unprecedented energy density of 2.64*10^6 Wh kg^-1. These results may provide a new and effective paradigm for energy conversion systems with ultra-high power and energy densities based on inner-shell electrons.

physics.atom-ph↗

arXiv2025

Simulation of MAPS and a MAPS-based Inner Tracker for the Super Tau-Charm Facility

Monolithic Active Pixel Sensors (MAPS) are a promising detector candidate for the inner tracker of the Super Tau-Charm Facility (STCF). To evaluate the performance of MAPS and the MAPS-based inner tracker, a dedicated simulation workflow has been developed, offering essential insights for detector design and optimization. The intrinsic characteristics of MAPS, designed using several fabrication processes and pixel geometries, were investigated through a combination of Technology Computer Aided Design (TCAD) and Monte Carlo simulations. Simulations were conducted with both minimum ionizing particles and $^{55}$Fe X-rays to assess critical parameters such as detection efficiency, cluster size, spatial resolution, and charge collection efficiency. Based on these evaluations, a MAPS sensor featuring a strip-like pixel and a high-resistivity epitaxial layer is selected as the baseline sensor design for the STCF inner tracker due to its excellent performance. Using this optimized MAPS design, a three-layer MAPS-based inner tracker was modeled and simulated. The simulation demonstrated an average detection efficiency exceeding 99%, spatial resolutions of 44.8$\rm{\mu m}$ in the $z$ direction and 8.2$\rm{\mu m}$ in the $r-\phi$ direction, and an intrinsic sensor time resolution of 5.9ns for 1GeV/c $\mu^-$ particles originating from the interaction point. These promising results suggest that the MAPS-based inner tracker fulfills the performance requirements of the STCF experiment.

physics.ins-det↗

arXiv2025

A Low Power Monolithic Active Pixel Sensor Prototype for the STCF Inner Tracker

The Super Tau-Charm Facility (STCF) is a proposed $e^+e^-$ collider with a peak luminosity 100 times higher than that of the present tau-charm factory. The inner tracker (ITK) of STCF should feature a low material budget and high readout speed. Under these requirements, the monolithic active pixel sensor (MAPS) is considered as a promising candidate for the ITK. To minimize the power consumption of MAPS (for low material budget), larger-size sensors are proposed to reduce the scale of the readout circuitry while preserving the required position resolution. Multiple sensors with varying dimensions and structures were designed and integrated in several prototype chips for performance comparison, fabricated in a 180~nm CIS process. The in-pixel readout circuit can also provide time of arrival (ToA) and time-over-threshold (ToT) of the hit signal, with a least significant bit (LSB) of 50 ns. The peripheral readout circuit performs operations including timestamp correction, data aggregation, caching, framing, 8b/10b encoding, and serialization. According to simulation, the power consumption for a full-scale chip is about 55.7 mW/cm2. Preliminary measurements have been conducted on the prototype chips.

physics.ins-det↗

arXiv2025

UniMoCo: Unified Modality Completion for Robust Multi-Modal Embeddings

Current vision-language models have been explored for multi-modal embedding tasks like information retrieval. However, they face significant challenges in real-world queries and targets involving diverse modality combinations, as existing approaches often fail to align all modality combinations within a unified embedding space during training, leading to degraded performance on rare modality patterns during inference. To address this fundamental limitation, we propose UniMoCo, a novel architecture featuring a modality-completion module that generates visual features from text, thereby ensuring modality completeness for both queries and targets. Additionally, UniMoCo incorporates a specialized training strategy that aligns embeddings from both original and modality-completed inputs, thus ensuring consistent and robust embeddings for diverse modality combinations. Comprehensive experiments demonstrate that UniMoCo outperforms previous methods while exhibiting consistent robustness across diverse settings. Furthermore, we identify and quantify the inherent bias in conventional approaches caused by imbalanced modality combinations in training data, showing that our modality-completion paradigm effectively mitigates this limitation. The code is available at https://github.com/HobbitQia/UniMoCo.

cs.CV↗

arXiv2025

HAAN: A Holistic Approach for Accelerating Normalization Operations in Large Language Models

Large language models (LLMs) have revolutionized natural language processing (NLP) tasks by achieving state-of-the-art performance across a range of benchmarks. Central to the success of these models is the integration of sophisticated architectural components aimed at improving training stability, convergence speed, and generalization capabilities. Among these components, normalization operation, such as layer normalization (LayerNorm), emerges as a pivotal technique, offering substantial benefits to the overall model performance. However, previous studies have indicated that normalization operations can substantially elevate processing latency and energy usage. In this work, we adopt the principles of algorithm and hardware co-design, introducing a holistic normalization accelerating method named HAAN. The evaluation results demonstrate that HAAN can achieve significantly better hardware performance compared to state-of-the-art solutions.

cs.AR↗

arXiv2019

A multichannel front end ASIC for PMT readout in LHAASO WCDA

Time and charge measurements over a large dynamic range from 1 Photo Electron (P.E.) to 4000 P.E. are required for the Water Cherenkov Detector Array (WCDA), which is one of the key components in the Large High Altitude Air Shower Observatory (LHAASO). To simplify the circuit structure of the readout electronics, a front end ASIC was designed. Based on the charge-to-time conversion method, the output pulse width of the ASIC corresponds to the input signal charge information while time information of the input signal is picked off through a discriminator, and thus the time and charge information can be digitized simultaneously using this ASIC and a following Time-to-Digital Converter (TDC). To address the challenge of mismatch among the channels observed in the previous prototype version, this work presents approaches for analyzing the problem and optimizing the circuits. A new version of the ASIC was designed and fabricated in the GLOBALFOUNDRIES 0.35 um CMOS technology, which integrates 6 channels (corresponding to the readout of the 3 PMTs) in each chip. The test results indicate that the mismatch between the channels is significantly reduced to less than 20% using the proposed approach. The time measurement resolution better than 300 ps is achieved, and the charge measurement resolution is better than 10% at 1 P.E., and 1% at 4000 P.E., which meets the application requirements.

physics.ins-det↗

arXiv2019

Prototype of a front-end readout ASIC designed for the Water Cherenkov Detector Array in LHAASO

The Large High Altitude Air Shower Observatory is in the R&D phase, in which the Water Cherenkov Detector Array is an important part. The signals of Photo-Multiplier Tubes would vary from single photo electron to 4000 photo electrons, and both high precision charge and time measurement is required. To simplify the signal processing chain, the charge-to-time conversion method is employed. A prototype of the front-end readout ASIC is designed and fabricated in Chartered 0.35 μm CMOS technology, which integrates time disctrimination and converts the input charge information to pulse widths. With Time-to-Digital Converters, both time and charge can be digitized at the same time. We have conducted initial tests on this chip, and the results indicate that a time resolution better than 0.5 ns is achieved over the full dynamic range (1~ 4000 photo electrons, corresponding to 0.75 ~ 3000 pC with the threshold of 0.188 pC); the charge resolution is better than 1% with large input amplitudes (500 ~ 4000 photo electrons), and remains better than 15% with a 1 photo electron input amplitude, which is beyond the application requirement.

physics.ins-det↗

arXiv2019

Prototype of a transient waveform recording ASIC

The paper presents the design and measurement results of a transient waveform recording ASIC based on the Switched Capacitor Array (SCA) architecture. This 0.18 μm CMOS prototype device contains two channels and each channel employs a SCA of 128 samples deep, a 12-bit Wilkinson ADC and a serial data readout. A series of tests have been conducted and the results indicate that: a full 1 V signal voltage range is available, the input analog bandwidth is approximately 450 MHz and the sampling speed is adjustable from 0.076 to 3.2 Gsps (Gigabit Samples Per Second). For precision waveform timing extraction, careful calibration of timing intervals between samples is conducted to improve the timing resolution of such chips, and the timing precision of this ASIC is proved to be better than 15 ps RMS.

physics.ins-det↗

arXiv2019

An overdetermined linear equations-based time calibration method for fast sampling ASICs

A novel time calibration method for waveform sampling application specific integrated circuits (ASICs) based on switched capacitor arrays (SCAs) is proposed in this paper. Precision timing extraction using SCA ASICs has been proved to be a promising technique in many high energy physics experiments. However, such ASICs suffer from irregular sampling intervals caused by process variations. Therefore, careful calibration is required to improve the time resolution of such systems. We evaluated the limitation of a popular method using the proportionality between voltage amplitude and sampling interval of adjacent switched-capacitor cells responding to either a sawtooth wave or a sine wave. The new time calibration method presented here utilizes the relationship between sampling intervals and the known input signal period to establish overdetermined linear equations, and the roots of these equations correspond to the actual sampling intervals. We applied this new method to a pulse timing test with an ASIC designed by our team, and the test results indicate that the new time calibration method is effective.

physics.ins-det↗

arXiv2018

Testing of Front-End Readout Prototype ASICs Designed for WCDA in LHAASO

The water Cherenkov detector array (WCDA) is one of the key detectors in the large high altitude air shower observatory (LHAASO), which is proposed for very high gamma ray source survey. In WCDA, there are more than 3000 photomultiplier tubes (PMTs) scattered under water in an area of 80000 m2. As for the WCDA readout electronics, both high precision time and charge measurement is required over a large dynamic range from 1 photon electron (P.E.) to 4000 P.E. To reduce the electronics complexity and improve the system reliability, a readout scheme based on application specific integrated circuits (ASICs) is proposed. Two prototype ASICs were designed and tested. The first ASIC integrates amplification and shaping circuits for charge measurement and discrimination circuits used for time measurement. The shaped signal is further fed to the second ADC ASIC, while the output signal from the discriminator is digitized by the FPGA-based time-to-digital converter (TDC). Test results indicate that time resolution is better than 250 ps RMS, and the charge resolution is better than 10% at 1 P.E., and 1% at 4000 P.E. which meets the requirements of the LHAASO WCDA.

physics.ins-det↗

arXiv2018

Mapping fast evolution of transient surface photovoltage dynamics using G-Mode Kelvin probe force microscopy

Optoelectronic phenomena in materials such as organic/inorganic hybrid perovskites depend on a complex interplay between light induced carrier generation and fast (electronic) and slower (ionic) processes, all of which are known to be strongly affected by structural inhomogeneities such as interfaces and grain boundaries. Here, we develop a time resolved Kelvin probe force microscopy (KPFM) approach, based on the G-Mode SPM platform, allowing quantification of surface photovoltage (SPV) with microsecond temporal and nanoscale spatial resolution. We demonstrate the approach on methylammonium lead bromide (MAPbBr3) thin films and further highlight the usefulness of unsupervised clustering methods to quickly discern spatial variability in the information rich SPV dataset. Using this technique, we observe concurrent spatial and ultra-fast temporal variations in the SPV generated across the thin film, indicating that structure is likely responsible for the heterogenous behavior.

physics.app-ph↗

arXiv2015

An Analogue Front-End ASIC Prototype Designed For PMT Signal Readout

The Large High Altitude Air Shower Observatory (LHAASO) is designed for high energy gamma ray and cosmic ray detection. A Water Cherenkov Detector Array which is sensitive to gamma ray showers above a few hundred GeV is proposed to survey gamma ray sources. The WCDA consists of 3600 PhotoMultiplier Tubes (PMT) which collect the Cherenkov light produced by the shower particles in water. Both high precision time and charge measurement are required over a large dynamic range from 1 photo electron (P.E.) to 4000 P.E. Prototype of an analogue front-end Application Specific Integrated Circuit (ASIC) fabricated in Chartered 0.35 μm CMOS technology is designed to read out PMT signal in the WCDA. This ASIC employs leading edge discrimination and RC4 shaping structure; combined with the following Time-to-Digital Converter (TDC) and Analog-to-Digital Converter (ADC), both the arrival time and charge of the PMT signal can be measured. Initial test results indicate that time resolution is better than 350 ps and charge resolution is better than 10% at 1 P.E. and better than 1% with large input signals (300 P.E. to 4000 P.E.). Besides, this ASIC has a small channel-to-channel crosstalk and low ambient temperature dependency.

physics.ins-det↗