arXiv subjects
Publications and source records attributed to Jian Chen.
Dispersion studies demonstrate that waveguide layout can be used to enhance the bandwidth performance of multimode polymer waveguides for use in board-level optical interconnects, providing >40 GHzxm without the need for any launch conditioning.
Bandwidth measurements are conducted on a 1.4 m long spiral polymer multimode waveguide for a SMF and 50/125 um MMF launch and for different input offsets. The waveguide exhibits a bandwidth of at least 30 GHz for all input types, yielding a bandwidth-length product of at least 42 GHzxm, while no impact is observed on the waveguide performance due to the different spatial input offsets. The results indicate that data transmission at data rates even higher than 25 Gb/s can be achieved over such structures, thereby demonstrating the potential of multimode polymer waveguide technologies in short-reach board-level datacommunication links.
Optical interconnects play a key role in the implementation of high-speed short-reach communication links within high-performance electronic systems. Multimode polymer waveguides in particular are strong candidates for use in passive optical backplanes as they can be cost-effectively integrated onto standard PCBs. Various optical backplanes using this technology and featuring a large number of multimode polymer waveguide components have been recently demonstrated. The optimisation of the loss performance of these complex waveguide layouts becomes particularly important at high data rates (>=25 Gb/s) due to the associated stringent power budget requirements. Moreover, launch conditions have to be carefully considered in such systems due to the highly-multimoded nature of this waveguide technology. In this paper therefore, we present thorough loss and bandwidth studies on siloxane-based multimode waveguides and waveguide components (i.e. bends and crossings) that enable the implementation of passive optical backplanes. The performance of these components is experimentally investigated under different launch conditions for different waveguide profiles that can be readily achieved through fabrication. Useful design rules on the use of waveguide bends and crossings are derived for each waveguide type. It is shown that the choice of waveguide parameters depends on the particular waveguide layout, assumed launch conditions and desired link bandwidth. As an application of these studies, the obtained results are employed to optimise the loss performance of a 10-card shuffle router and enable >=40 Gb/s data transmission.
A new ternary platinum phosphide CePt$_{3}$P was synthesized and characterized by means of magnetic, thermodynamic and transport measurements. The compound crystallizes in an antiperovskite tetragonal structure similar to that in the canonical family of platinum-based superconductors $A$Pt$_{3}$P ($A$ = Sr, Ca, La) and closely related to the noncentrosymmetric heavy fermion superconductor CePt$_{3}$Si. In contrast to all the superconducting counterparts, however, no superconductivity is observed in CePt$_{3}$P down to 0.5 K. Instead, CePt$_{3}$P displays a coexistence of antiferromagnetic ordering, Kondo effect and crystalline electric field effect. A field-induced spin-flop transition is observed below the magnetic ordering temperature $T_{N1}$ of 3.0 K while the Kondo temperature is of similar magnitude as $T_{N1}$. The obtained Sommerfeld coefficient of electronic specific heat is $γ_{Ce}$ = 86 mJ/molK$^{2}$ indicating that CePt$_{3}$P is a moderately correlated antiferromagnetic Kondo lattice compound.
The temporary resistance triggered by phase slip will result in the switching of superconductor nanowire to a permanent normal state, decreasing the switching current. In this letter, we propose an improved impedance matching circuit that releases the transition triggered by phase slips to the load resistor through the RF port of a bias tee. The transportation properties with different load resistors indicate that the switching current decreases due to the reflection caused by impedance mismatching, and is maximized by optimized impedance matching. Compared to the same setup without impedance matching circuit, the switching current was increased from 8.0 micro A to 12.2 micro A in a niobium nitride nanowire after releasing the temporary transition triggered by phase slips. The leakage process with impedance matching outputs a voltage pulse which enables the user to directly register the transition triggered by phase slips. The technique for maximizing the switching current has potential practical application in superconductor devices, and the technique for counting phase slips may be applied to explore the quantum behavior of phase slips.
Optical interconnects have attracted significant research interest for use in short-reach board-level optical communication links in supercomputers and data centres. Multimode polymer waveguides in particular constitute an attractive technology for on-board optical interconnects as they provide high bandwidth, offer relaxed alignment tolerances, and can be cost-effectively integrated onto standard printed circuit boards (PCBs). However, the continuing improvements in bandwidth performance of optical sources make it important to investigate approaches to develop high bandwidth polymer waveguides. In this paper, we present dispersion studies on a graded-index (GI) waveguide in siloxane materials designed to deliver high bandwidth over a range of launch conditions. Bandwidth-length products of >70 GHzxm and ~65 GHzxm are observed using a 50/125 um multimode fibre (MMF) launch for input offsets of +/- 10 um without and with the use of a mode mixer respectively; and enhanced values of >100 GHzxm are found under a 10x microscope objective launch for input offsets of ~18 x 20 um^2. The large range of offsets is within the -1 dB alignment tolerances. A theoretical model is developed using the measured refractive index profile of the waveguide, and general agreement is found with experimental bandwidth measurements. The reported results clearly demonstrate the potential of this technology for use in high-speed board-level optical links, and indicate that data transmission of 100 Gb/s over a multimode polymer waveguide is feasible with appropriate refractive index engineering.
Aiming at high precision beam position measurement of micron or sub-micron for Shanghai Soft X-ray free electron laser (SXFEL) facility which is being built in site of the Shanghai Synchrotron Radiation Facility (SSRF), Shanghai Institute of Applied Physics has developed a high Q cavity beam position monitor (CBPM) that the resonant frequency is 4.7 GHz and relevant BPM electronics include dedicated RF front-end and home-made digital BPM (DBPM) also has been done. The cavity design, cold test, system architecture and the beam test with three adjacent pickups has been performed in Shanghai Deep ultraviolet free electron laser(SDUV-FEL) facility are included. The beam experiment results show that the physical design of our CBPM is consistent with the expectations basically and the beam position resolution can fulfill the resolution requirements for the SXFEL project if we optimize the beam conditions.
We synthesized a series of Nb$_{2}$Pd$_{1-x}$Ru$_{x}$S$_{5}$ polycrystalline samples by a solid-state reaction method and systematically investigated the Ru-doping effect on superconductivity by transport and magnetic measurements. It is found that superconductivity is enhanced with Ru doping and is quite robust upon disorder. Hall coefficient measurements indicate that the charge transport is dominated by hole-type charge carriers similar to the case of Ir doping, suggesting multi-band superconductivity. Upon Ru or Ir doping, \emph H$_{c2}$/$\emph T_c$ exhibits a significant enhancement, exceeding the Pauli paramagnetic limit value by a factor of approximately 4. A comparison of $T_c$ and the upper critical field ($H_{c2}$) amongst the different doping elements on Pd site, reveals a significant role of spin--orbit coupling.
The Device-to-Device (D2D) communication principle is a key enabler of direct localized communication between mobile nodes and is expected to propel a plethora of novel multimedia services. However, even though it offers a wide set of capabilities mainly due to the proximity and resource reuse gains, interference must be carefully controlled to maximize the achievable rate for coexisting cellular and D2D users. The scope of this work is to provide an interference-aware real-time resource allocation (RA) framework for relay-aided D2D communications that underlay cellular networks. The main objective is to maximize the overall network throughput by guaranteeing a minimum rate threshold for cellular and D2D links. To this direction, genetic algorithms (GAs) are proven to be powerful and versatile methodologies that account for not only enhanced performance but also reduced computational complexity in emerging wireless networks. Numerical investigations highlight the performance gains compared to baseline RA methods and especially in highly dense scenarios which will be the case in future 5G networks.
We synthesized nonmagnetic PtBi$_2$ single crystals and observed a giant linear magneto-resistance (MR) up to 684\% under a magnetic field $μ_0H$ = 15 T at $T$ = 2 K. The linear MR decreases with increasing temperature, but it is still as large as 61\% under $μ_0H$ of 15 T at room temperature. Such a giant linear MR is unlikely to be described by the quantum model as the quantum condition is not satisfied. Instead, we found that the slope of MR scales with the Hall mobility, and it can be well explained by a classical disorder model.
By driving a 3D transmon with microwave fields, we generate an effective avoided energy-level crossing. Then we chirp microwave frequency, which is equivalent to driving the system through the avoided energy-level crossing by sweeping the avoided crossing. A double-passage chirp produces Landau-Zener-Stückelberg-Majorana interference that agree well with the numerical results. Our method is fully applicable to other quantum systems that contain no intrinsic avoided level crossing, providing an alternative approach for quantum control and quantum simulation.
Silicene, a counterpart of graphene, has achieved rapid development due to its exotic electronic properties and excellent compatibility with the mature silicon-based semiconductor technology. Its low room-temperature mobility of about 100 cm2V-1s-1, however, inhibits device applications such as in field-effect transistors. Generally, defects and grain boundaries would act as scattering centers and thus reduce the carrier mobility. In this paper, the morphologies of various point defects in epitaxial silicene on Ag(111) surfaces have been systematically investigated using first-principles calculations combined with experimental scanning tunneling microscope (STM) observations. The STM signatures for various defects in epitaxial silicene on Ag(111) surface are identified. In particular, the formation energies of point defects in Ag(111)-supported silicene sheets show an interesting dependence on the superstructures, which, in turn, may have implications for controlling the defect density during the synthesis of silicene. Through estimating the concentrations of various point defects in different silicene superstructures, the mystery of the defective appearance of v13*v13 silicene in experiments is revealed, and 4*4 silicene sheet is thought to be the most suitable structure for future device applications.
In this paper, we address the problem of optimal power allocation at the relay in two-hop secure communications under practical conditions. To guarantee secure communication during the long-distance transmission, the massive MIMO (M-MIMO) relaying techniques are explored to significantly enhance wireless security. The focus of this paper is on the analysis and design of optimal power assignment for a decode-and-forward (DF) M-MIMO relay, so as to maximize the secrecy outage capacity and minimize the interception probability, respectively. Our study reveals the condition for a nonnegative the secrecy outage capacity, obtains closed-form expressions for optimal power, and presents the asymptotic characteristics of secrecy performance. Finally, simulation results validate the effectiveness of the proposed schemes.
We present LDAExplore, a tool to visualize topic distributions in a given document corpus that are generated using Topic Modeling methods. Latent Dirichlet Allocation (LDA) is one of the basic methods that is predominantly used to generate topics. One of the problems with methods like LDA is that users who apply them may not understand the topics that are generated. Also, users may find it difficult to search correlated topics and correlated documents. LDAExplore, tries to alleviate these problems by visualizing topic and word distributions generated from the document corpus and allowing the user to interact with them. The system is designed for users, who have minimal knowledge of LDA or Topic Modelling methods. To evaluate our design, we run a pilot study which uses the abstracts of 322 Information Visualization papers, where every abstract is considered a document. The topics generated are then explored by users. The results show that users are able to find correlated documents and group them based on topics that are similar.
We propose and experimentally demonstrate detecting small single-cycle and few-cycle signals by using the symmetric double-well potential of a radio frequency superconducting quantum interference device (rf-SQUID). We show that the response of this bistable system to single- and few-cycle signals has a non-monotonic dependence on the noise strength. The response, measured by the probability of transition from initial potential well to the opposite one, becomes maximum when the noise-induced transition rate between the two stable states of the rf-SQUID is comparable to the signal frequency. Comparison to numerical simulations shows that the phenomenon is a manifestation of stochastic resonance.
X-ray scattering is a weak linear probe of matter. It is primarily sensitive to the position of electrons and their momentum distribution. Elastic X-ray scattering forms the basis of atomic structural determination while inelastic Compton scattering is often used as a spectroscopic probe of both single-particle excitations and collective modes. X-ray free-electron lasers (XFELs) are unique tools for studying matter on its natural time and length scales due to their bright and coherent ultrashort pulses. However, in the focus of an XFEL the assumption of a weak linear probe breaks down, and nonlinear light-matter interactions can become ubiquitous. The field can be sufficiently high that even non-resonant multiphoton interactions at hard X-rays wavelengths become relevant. Here we report the observation of one of the most fundamental nonlinear X-ray-matter interactions, the simultaneous Compton scattering of two identical photons producing a single photon at nearly twice the photon energy. We measure scattered photons with an energy near 18 keV generated from solid beryllium irradiated by 8.8-9.75 keV XFEL pulses. The intensity in the X-ray focus reaches up to 4x20 W/cm2, which corresponds to a peak electric field two orders of magnitude higher than the atomic unit of field-strength and within four orders of magnitude of the quantum electrodynamic critical field. The observed signal scales quadratically in intensity and is emitted into a non-dipolar pattern, consistent with the simultaneous two-photon scattering from free electrons. However, the energy of the generated photons shows an anomalously large redshift only present at high intensities. This indicates that the instantaneous high-intensity scattering effectively interacts with a different electron momentum distribution than linear Compton scattering, with implications for the study of atomic-scale structure and dynamics of matter
Landau-Zener transition (LZT) has been explored in a variety of physical systems for coherent population transfer between different quantum states. In recent years, there have been various proposals for applying LZT to quantum information processing because when compared to the methods using ac pulse for coherent population transfer, protocols based on LZT are less sensitive to timing errors. However, the effect of finite range of qubit energy available to LZT based state control operations has not been thoroughly examined. In this work, we show that using the well-known Landau-Zener formula in the vicinity of an avoided energy-level crossing will cause considerable errors due to coherent oscillation of the transition probability in a single-passage LZT experiment. The data agree well with the numerical simulations which take the transient dynamics of LZT into account. These results not only provide a closer view on the issue of finite-time LZT but also shed light on its effects on the quantum state manipulation.
In this paper, we address the problem of optimal power allocation at the relay in two-hop secure communications. In order to solve the challenging issue of short-distance interception in secure communications, the benefit of large-scale MIMO (LS-MIMO) relaying techniques is exploited to improve the secrecy performance significantly, even in the case without eavesdropper channel state information (CSI). The focus of this paper is on the analysis and design of optimal power allocation for the relay, so as to maximize the secrecy outage capacity. We reveal the condition that the secrecy outage capacity is positive, prove that there is one and only one optimal power, and present an optimal power allocation scheme. Moreover, the asymptotic characteristics of the secrecy outage capacity is carried out to provide some clear insights for secrecy performance optimization. Finally, simulation results validate the effectiveness of the proposed scheme.