SearcharxivSearch

arXiv subjects

Jian Dong

Publications and source records attributed to Jian Dong.

At least 19 recordsLinked to original sources

Robust Betatron-Tune Measurement from Schottky Spectra: Complementary Classical and Deep-Learning Paradigms

Schottky spectra provide key beam diagnostics, with betatron sidebands encoding the fractional tune. Reliable tune measurement is particularly important for third-order resonance slow extraction in compact medical proton synchrotrons, where low signal-to-noise ratios and limited frequency resolution can compromise conventional peak-detection and curve-fitting methods. This work develops two complementary tune estimators with a shared spectral front-end but different temporal representations. The classical estimator coherently pools motion-compensated spectra, detects the sideband using a multi-width matched-filter bank, and performs sub-bin estimation through local argmax and an adaptive MAD-gated centroid. The deep-learning estimator converts each spectrum into a tune-likelihood map using a convolutional neural network with FFT-based global convolutions, then propagates the posterior with a discrete two-dimensional (q,v) Bayesian tracker under a Gaussian motion model while also reporting posterior uncertainty. On a synthetic dynamic-tune benchmark, the deep-learning estimator outperforms published baselines across the operating range, while the classical estimator exceeds the latency-compensated baseline and requires neither training data nor GPU acceleration. On near-stationary SAPT beam data, both methods operate end-to-end, with the deep-learning model requiring no retraining. Median per-frame latency remains below 1 ms on commodity hardware, supporting real-time-capable tune measurement in compact medical synchrotrons.

physics.acc-ph

UniRec: Bridging the Expressive Gap between Generative and Discriminative Recommendation via Chain-of-Attribute

Generative Recommendation (GR) reframes retrieval and ranking as autoregressive decoding over Semantic IDs (SIDs), unifying the multi-stage pipeline into a single model. Yet a fundamental expressive gap persists: discriminative models score items with direct feature access enabling explicit user-item crossing, whereas GR decodes over compact SID tokens without item-side signal. We formalize this via Bayes' theorem: ranking by p(y|f,u) is equivalent to ranking by p(f|y,u), which factorizes autoregressively over item features, showing that a generative model with full feature access matches its discriminative counterpart, with any practical gap stemming solely from incomplete feature coverage. We propose UniRec with Chain-of-Attribute (CoA) as its core mechanism. CoA prefixes each SID sequence with structured attribute tokens:category, seller, brand, before decoding the SID, recovering the item-side feature crossing that discriminative models exploit. Since items sharing identical attributes cluster in adjacent SID regions, attribute conditioning yields a measurable per-step entropy reduction H(s_k|s<k,a) < H(s_k|s<k), narrowing the search space and stabilizing beam search. We further address two deployment challenges: Capacity-constrained SID introduces exposure-weighted capacity penalties into residual quantization to suppress token collapse and the Matthew effect; Conditional Decoding Context (CDC) combines Task-Conditioned BOS with hash-based Content Summaries to inject scenario signals at each decoding step. A joint RFT and DPO framework aligns the model with business objectives beyond distribution matching. Experiments show UniRec outperforms the strongest baseline by +22.6% HR@50 overall and +15.5% on high-value orders. Deployed on Shopee's e-commerce platform, online A/B tests confirm significant gains in PVCTR (+5.37%), orders (+4.76%), and GMV (+5.60%).

cs.IR

Deep Situation-Aware Interaction Network for Click-Through Rate Prediction

User behavior sequence modeling plays a significant role in Click-Through Rate (CTR) prediction on e-commerce platforms. Except for the interacted items, user behaviors contain rich interaction information, such as the behavior type, time, location, etc. However, so far, the information related to user behaviors has not yet been fully exploited. In the paper, we propose the concept of a situation and situational features for distinguishing interaction behaviors and then design a CTR model named Deep Situation-Aware Interaction Network (DSAIN). DSAIN first adopts the reparameterization trick to reduce noise in the original user behavior sequences. Then it learns the embeddings of situational features by feature embedding parameterization and tri-directional correlation fusion. Finally, it obtains the embedding of behavior sequence via heterogeneous situation aggregation. We conduct extensive offline experiments on three real-world datasets. Experimental results demonstrate the superiority of the proposed DSAIN model. More importantly, DSAIN has increased the CTR by 2.70\%, the CPM by 2.62\%, and the GMV by 2.16\% in the online A/B test. Now, DSAIN has been deployed on the Meituan food delivery platform and serves the main traffic of the Meituan takeout app.

cs.IR

Let the Agent Steer: Closed-Loop Ranking Optimization via Influence Exchange

Recommendation ranking is fundamentally an influence allocation problem: a sorting formula distributes ranking influence among competing factors, and the business outcome depends on finding the optimal "exchange rates" among them. However, offline proxy metrics systematically misjudge how influence reallocation translates to online impact, with asymmetric bias across metrics that a single calibration factor cannot correct. We present Sortify, the first fully autonomous LLM-driven ranking optimization agent deployed in a large-scale production recommendation system. The agent reframes ranking optimization as continuous influence exchange, closing the full loop from diagnosis to parameter deployment without human intervention. It addresses structural problems through three mechanisms: (1) a dual-channel framework grounded in Savage's Subjective Expected Utility (SEU) that decouples offline-online transfer correction (Belief channel) from constraint penalty adjustment (Preference channel); (2) an LLM meta-controller operating on framework-level parameters rather than low-level search variables; (3) a persistent Memory DB with 7 relational tables for cross-round learning. Its core metric, Influence Share, provides a decomposable measure where all factor contributions sum to exactly 100%. Sortify has been deployed across two markets. In Country A, the agent pushed GMV from -3.6% to +9.2% within 7 rounds with peak orders reaching +12.5%. In Country B, a cold-start deployment achieved +4.15% GMV/UU and +3.58% Ads Revenue in a 7-day A/B test, leading to full production rollout.

cs.AI

Yet Even Less Is Even Better For Agentic, Reasoning, and Coding LLMs

Training effective software engineering agents requires large volumes of task-specific trajectories, incurring substantial data construction costs. Inspired by the "Less-Is-More" hypothesis in mathematical reasoning, we investigate its extension to agentic scenarios and propose an end-to-end training framework that achieves superior agentic capabilities with fewer but higher-quality training trajectories. This is achieved via STITCH (Sliding-memory Trajectory Inference and Task Chunking Heuristic), a coarse-to-fine mechanism that filters low-value noise and retains decision-critical tokens to maximize training signal quality. We conduct experiments across multiple agent frameworks (e.g., mini-SWE-agent, MSWE-agent), model scales (30B to 355B), and multilingual settings (Python, Java, and ArkTS). On SWE-bench Verified, models trained with STITCH achieve up to 63.16% relative improvement over base models. On Multi-SWE-bench (Java), MiniMax-M2.5-STITCH achieves 43.75% with our CodeArts Agent scaffold (+16.67%). On HarmonyOS (ArkTS), GLM-4.7-STITCH improves the compilation pass rate to 61.31% (+43.34%) with less than 1K training trajectories. Our results confirm that the "Less-Is-More" paradigm generalizes effectively to complex agentic tasks across diverse languages and model scales.

cs.SE

Superballistic transport of thermal photons in confined many-body systems

Ballistic transport, realized when the system size is smaller than the mean free path of energy carriers, is traditionally regarded as the ultimate limit for energy transfer. Here, we predict a superballistic radiative heat transport regime that surpasses this limit in dilute chains of plasmonic nanoparticles confined within cavities. This anomalous regime exhibits superlinear scaling of the effective thermal conductivity (k ~L^1.5) and originates from the amplification of long-range interactions mediated by cavity-guided modes. Our results establish a framework for ultrafast photonic heat transport and open pathways for thermal management, information processing and energy transfer in quantum and nanoscale systems.

physics.optics

Unleashing the Potential of Sparse Attention on Long-term Behaviors for CTR Prediction

In recent years, the success of large language models (LLMs) has driven the exploration of scaling laws in recommender systems. However, models that demonstrate scaling laws are actually challenging to deploy in industrial settings for modeling long sequences of user behaviors, due to the high computational complexity of the standard self-attention mechanism. Despite various sparse self-attention mechanisms proposed in other fields, they are not fully suited for recommendation scenarios. This is because user behaviors exhibit personalization and temporal characteristics: different users have distinct behavior patterns, and these patterns change over time, with data from these users differing significantly from data in other fields in terms of distribution. To address these challenges, we propose SparseCTR, an efficient and effective model specifically designed for long-term behaviors of users. To be precise, we first segment behavior sequences into chunks in a personalized manner to avoid separating continuous behaviors and enable parallel processing of sequences. Based on these chunks, we propose a three-branch sparse self-attention mechanism to jointly identify users' global interests, interest transitions, and short-term interests. Furthermore, we design a composite relative temporal encoding via learnable, head-specific bias coefficients, better capturing sequential and periodic relationships among user behaviors. Extensive experimental results show that SparseCTR not only improves efficiency but also outperforms state-of-the-art methods. More importantly, it exhibits an obvious scaling law phenomenon, maintaining performance improvements across three orders of magnitude in FLOPs. In online A/B testing, SparseCTR increased CTR by 1.72\% and CPM by 1.41\%. Our source code is available at https://github.com/laiweijiang/SparseCTR.

cs.IR

Lost in Benchmarks? Rethinking Large Language Model Benchmarking with Item Response Theory

The evaluation of large language models (LLMs) via benchmarks is widespread, yet inconsistencies between different leaderboards and poor separability among top models raise concerns about their ability to accurately reflect authentic model capabilities. This paper provides a critical analysis of benchmark effectiveness, examining mainstream prominent LLM benchmarks using results from diverse models. We first propose Pseudo-Siamese Network for Item Response Theory (PSN-IRT), an enhanced Item Response Theory framework that incorporates a rich set of item parameters within an IRT-grounded architecture. PSN-IRT can be utilized for accurate and reliable estimations of item characteristics and model abilities. Based on PSN-IRT, we conduct extensive analysis on 11 LLM benchmarks comprising 41,871 items, revealing significant and varied shortcomings in their measurement quality. Furthermore, we demonstrate that leveraging PSN-IRT is able to construct smaller benchmarks while maintaining stronger alignment with human preference.

cs.CL

TIM-PRM: Verifying multimodal reasoning with Tool-Integrated PRM

Multimodal Large Language Models (MLLMs) have achieved impressive performances in mathematical reasoning, yet they remain vulnerable to visual hallucinations and logical inconsistencies that standard outcome-based supervision fails to mitigate. While Process Reward Models (PRMs) promise step-by-step verification, current approaches typically operate as scalar scorers or generative critics that suffer from sycophancy, blindly validating the flawed hypotheses rather than grounding them in visual reality. To bridge this gap, we introduce TIM-PRM (Tool-Integrated Multimodal PRM), a novel agentic framework that transforms verification from a passive classification task into an active, tool-augmented investigation. TIM-PRM is trained to explicitly plan verification strategies and utilizes a mechanism of Independent Question Asking to query evidence via external tools, effectively decoupling verification from the reasoning context to eliminate confirmation bias. We instantiate this method by curating a high-quality dataset of tool-integrated verification trajectories. Extensive experiments on VisualProcessBench demonstrate that our 8B parameter model surpasses existing open-source multimodal PRMs, significantly outperforming much larger models like Qwen2.5-72B and InternVL-78B, while offering interpretable insights into the verification process.

cs.AI

Real-Time-Capable Betatron Tune Measurement from Schottky Spectra Using Deep Learning and Uncertainty-Aware Kalman Filtering

Betatron tune measurement is essential for beam control in compact proton-therapy synchrotrons, yet conventional peak-detection techniques are not robust under the low signal-to-noise ratio (SNR) conditions typical of these machines. This work presents a lightweight convolutional neural network that performs real-time tune extraction from Schottky spectra with sub-millisecond inference latency and calibrated uncertainty estimates. The model uses attention-based pooling for reliable peak localization and a dual-branch architecture that jointly predicts the tune and its associated uncertainty. Trained with a Laplace negative log-likelihood loss, it produces uncertainty estimates whose magnitude tracks the instantaneous prediction error, which enables uncertainty-aware Kalman filtering for temporal smoothing. Experiments on a large synthetic dataset spanning SNR levels from 0 to $-20$\,dB demonstrate substantial performance gains over traditional peak-detection baselines, while the Kalman filter further suppresses transient outliers in time-series operation. Preliminary validation on operational beam data confirms stable tune tracking without retraining. With only about $2.0\times 10^{4}$ trainable parameters and real-time inference on commodity GPU hardware, the proposed diagnostic offers a practical solution for rapid and accurate betatron tune monitoring in compact medical synchrotrons and similar accelerators.

physics.acc-ph

Modeling Long-term User Behaviors with Diffusion-driven Multi-interest Network for CTR Prediction

CTR (Click-Through Rate) prediction, crucial for recommender systems and online advertising, etc., has been confirmed to benefit from modeling long-term user behaviors. Nonetheless, the vast number of behaviors and complexity of noise interference pose challenges to prediction efficiency and effectiveness. Recent solutions have evolved from single-stage models to two-stage models. However, current two-stage models often filter out significant information, resulting in an inability to capture diverse user interests and build the complete latent space of user interests. Inspired by multi-interest and generative modeling, we propose DiffuMIN (Diffusion-driven Multi-Interest Network) to model long-term user behaviors and thoroughly explore the user interest space. Specifically, we propose a target-oriented multi-interest extraction method that begins by orthogonally decomposing the target to obtain interest channels. This is followed by modeling the relationships between interest channels and user behaviors to disentangle and extract multiple user interests. We then adopt a diffusion module guided by contextual interests and interest channels, which anchor users' personalized and target-oriented interest types, enabling the generation of augmented interests that align with the latent spaces of user interests, thereby further exploring restricted interest space. Finally, we leverage contrastive learning to ensure that the generated augmented interests align with users' genuine preferences. Extensive offline experiments are conducted on two public datasets and one industrial dataset, yielding results that demonstrate the superiority of DiffuMIN. Moreover, DiffuMIN increased CTR by 1.52% and CPM by 1.10% in online A/B testing. Our source code is available at https://github.com/laiweijiang/DiffuMIN.

cs.IR

Exploring Scaling Laws of CTR Model for Online Performance Improvement

CTR models play a vital role in improving user experience and boosting business revenue in many online personalized services. However, current CTR models generally encounter bottlenecks in performance improvement. Inspired by the scaling law phenomenon of LLMs, we propose a new paradigm for improving CTR predictions: first, constructing a CTR model with accuracy scalable to the model grade and data size, and then distilling the knowledge implied in this model into its lightweight model that can serve online users. To put it into practice, we construct a CTR model named SUAN (Stacked Unified Attention Network). In SUAN, we propose the UAB as a behavior sequence encoder. A single UAB unifies the modeling of the sequential and non-sequential features and also measures the importance of each user behavior feature from multiple perspectives. Stacked UABs elevate the configuration to a high grade, paving the way for performance improvement. In order to benefit from the high performance of the high-grade SUAN and avoid the disadvantage of its long inference time, we modify the SUAN with sparse self-attention and parallel inference strategies to form LightSUAN, and then adopt online distillation to train the low-grade LightSUAN, taking a high-grade SUAN as a teacher. The distilled LightSUAN has superior performance but the same inference time as the LightSUAN, making it well-suited for online deployment. Experimental results show that SUAN performs exceptionally well and holds the scaling laws spanning three orders of magnitude in model grade and data size, and the distilled LightSUAN outperforms the SUAN configured with one grade higher. More importantly, the distilled LightSUAN has been integrated into an online service, increasing the CTR by 2.81% and CPM by 1.69% while keeping the average inference time acceptable. Our source code is available at https://github.com/laiweijiang/SUAN.

cs.IR

DTN: Deep Multiple Task-specific Feature Interactions Network for Multi-Task Recommendation

Neural-based multi-task learning (MTL) has been successfully applied to many recommendation applications. However, these MTL models (e.g., MMoE, PLE) did not consider feature interaction during the optimization, which is crucial for capturing complex high-order features and has been widely used in ranking models for real-world recommender systems. Moreover, through feature importance analysis across various tasks in MTL, we have observed an interesting divergence phenomenon that the same feature can have significantly different importance across different tasks in MTL. To address these issues, we propose Deep Multiple Task-specific Feature Interactions Network (DTN) with a novel model structure design. DTN introduces multiple diversified task-specific feature interaction methods and task-sensitive network in MTL networks, enabling the model to learn task-specific diversified feature interaction representations, which improves the efficiency of joint representation learning in a general setup. We applied DTN to our company's real-world E-commerce recommendation dataset, which consisted of over 6.3 billion samples, the results demonstrated that DTN significantly outperformed state-of-the-art MTL models. Moreover, during online evaluation of DTN in a large-scale E-commerce recommender system, we observed a 3.28% in clicks, a 3.10% increase in orders and a 2.70% increase in GMV (Gross Merchandise Value) compared to the state-of-the-art MTL models. Finally, extensive offline experiments conducted on public benchmark datasets demonstrate that DTN can be applied to various scenarios beyond recommendations, enhancing the performance of ranking models.

cs.IR

High-Accuracy Schottky Diagnostics for Low-SNR Betatron Tune Measurement in Ramping Synchrotrons

This study introduces a novel real-time betatron tune measurement algorithm, utilizing Schottky signals and an FPGA-based backend architecture, specifically designed for rapidly ramping synchrotrons, with particular application to the Shanghai Advanced Proton Therapy (SAPT) facility. The developed algorithm demonstrates improved measurement accuracy under challenging operational conditions, especially in scenarios with limited sampling time and signal-to-noise ratios (SNR) as low as \(-20\) dB. By applying Short-Time Fourier Transform (STFT) analysis, the algorithm effectively accommodates the rapid increase in revolution frequency from 4 MHz to 7.5 MHz over 0.35 seconds, along with tune shifts. A macro-particle simulation methodology is employed to generate Schottky signals, which are then combined with real noise collected from an analog-to-digital converter (ADC) to simulate practical conditions. The proposed betatron tune measurement algorithm integrates advanced spectral processing techniques and an enhanced peak detection algorithm specifically tailored for low SNR conditions. Experimental validation confirms the superior performance of the proposed algorithm over conventional approaches in terms of measurement accuracy, stability, and system robustness, while meeting the stringent operational requirements of proton therapy applications. This innovative approach effectively addresses critical limitations associated with Schottky diagnostics for betatron tune measurement in rapidly ramping synchrotrons operating under low SNR conditions, laying a robust foundation and providing a viable solution for advanced applications in proton therapy and related accelerator physics fields.

physics.acc-ph

Enhancing, Refining, and Fusing: Towards Robust Multi-Scale and Dense Ship Detection

Synthetic aperture radar (SAR) imaging, celebrated for its high resolution, all-weather capability, and day-night operability, is indispensable for maritime applications. However, ship detection in SAR imagery faces significant challenges, including complex backgrounds, densely arranged targets, and large scale variations. To address these issues, we propose a novel framework, Center-Aware SAR Ship Detector (CASS-Det), designed for robust multi-scale and densely packed ship detection. CASS-Det integrates three key innovations: (1) a center enhancement module (CEM) that employs rotational convolution to emphasize ship centers, improving localization while suppressing background interference; (2) a neighbor attention module (NAM) that leverages cross-layer dependencies to refine ship boundaries in densely populated scenes; and (3) a cross-connected feature pyramid network (CC-FPN) that enhances multi-scale feature fusion by integrating shallow and deep features. Extensive experiments on the SSDD, HRSID, and LS-SSDD-v1.0 datasets demonstrate the state-of-the-art performance of CASS-Det, excelling at detecting multi-scale and densely arranged ships.

cs.CV

RepGhost: A Hardware-Efficient Ghost Module via Re-parameterization

Feature reuse has been a key technique in light-weight convolutional neural networks (CNNs) architecture design. Current methods usually utilize a concatenation operator to keep large channel numbers cheaply (thus large network capacity) by reusing feature maps from other layers. Although concatenation is parameters- and FLOPs-free, its computational cost on hardware devices is non-negligible. To address this, this paper provides a new perspective to realize feature reuse implicitly and more efficiently instead of concatenation. A novel hardware-efficient RepGhost module is proposed for implicit feature reuse via reparameterization, instead of using concatenation operator. Based on the RepGhost module, we develop our efficient RepGhost bottleneck and RepGhostNet. Experiments on ImageNet and COCO benchmarks demonstrate that our RepGhostNet is much more effective and efficient than GhostNet and MobileNetV3 on mobile devices. Specially, our RepGhostNet surpasses GhostNet 0.5x by 2.5% Top-1 accuracy on ImageNet dataset with less parameters and comparable latency on an ARM-based mobile device. Code and model weights are available at https://github.com/ChengpengChen/RepGhost.

cs.CV

Dishonest Approximate Computing: A Coming Crisis for Cloud Clients

Approximate Computing (AC) has emerged as a promising technique for achieving energy-efficient architectures and is expected to become an effective technique for reducing the electricity cost for cloud service providers (CSP). However, the potential misuse of AC has not received adequate attention, which is a coming crisis behind the blueprint of AC. Driven by the pursuit of illegal financial profits, untrusted CSPs may deploy low-cost AC devices and deceive clients by presenting AC services as promised accurate computing products, while falsely claiming AC outputs as accurate results. This misuse of AC will cause both financial loss and computing degradation to cloud clients. In this paper, we define this malicious attack as DisHonest Approximate Computing (DHAC) and analyze the technical challenges faced by clients in detecting such attacks. To address this issue, we propose two golden model free detection methods: Residual Class Check (RCC) and Forward-Backward Check (FBC). RCC provides clients a low-cost approach to infer the residual class to which a legitimate accurate output should belong. By comparing the residual class of the returned result, clients can determine whether a computing service contains any AC elements. FBC detects potential DHAC by computing an invertible check branch using the intermediate values of the program. It compares the values before entering and after returning from the check branch to identify any discrepancies. Both RCC and FBC can be executed concurrently with real computing tasks, enabling real-time DHAC detection with current inputs. Our experimental results show that both RCC and FBC can detect over 96%-99% of DHAC cases without misjudging any legitimate accurate results.

cs.CR

TBIN: Modeling Long Textual Behavior Data for CTR Prediction

Click-through rate (CTR) prediction plays a pivotal role in the success of recommendations. Inspired by the recent thriving of language models (LMs), a surge of works improve prediction by organizing user behavior data in a \textbf{textual} format and using LMs to understand user interest at a semantic level. While promising, these works have to truncate the textual data to reduce the quadratic computational overhead of self-attention in LMs. However, it has been studied that long user behavior data can significantly benefit CTR prediction. In addition, these works typically condense user diverse interests into a single feature vector, which hinders the expressive capability of the model. In this paper, we propose a \textbf{T}extual \textbf{B}ehavior-based \textbf{I}nterest Chunking \textbf{N}etwork (TBIN), which tackles the above limitations by combining an efficient locality-sensitive hashing algorithm and a shifted chunk-based self-attention. The resulting user diverse interests are dynamically activated, producing user interest representation towards the target item. Finally, the results of both offline and online experiments on real-world food recommendation platform demonstrate the effectiveness of TBIN.

cs.IR