arXiv subjects

Jian Gou

Publications and source records attributed to Jian Gou.

9 recordsLinked to original sources

arXiv2024

1D flat bands in phosphorene nanoribbons with pentagonal nature

Materials with flat bands can serve as a promising platform to investigate strongly interacting phenomena. However, experimental realization of ideal flat bands is mostly limited to artificial lattices or moir\'e systems. Here we report a general way to construct one-dimensional (1D) flat bands in phosphorene nanoribbons (PNRs) with pentagonal nature: penta-hexa-PNRs and penta-dodeca-PNRs, wherein the corresponding 1D flat bands are directly verified by using angle-resolved photoemission spectroscopy. We confirm that the observed 1D flat bands originate from the electronic 1D zigzag and Lieb lattices, respectively, as revealed by the combination of bond-resolved scanning tunneling microscopy, scanning tunneling spectroscopy, tight-binding models, and first-principles calculations. Our study demonstrates a general way to construct 1D flat bands in 1D solid materials system, which provides a robust platform to explore strongly interacting phases of matter.

cond-mat.mtrl-sci↗

arXiv2023

Controlled alignment of supermoir\'e lattice in double-aligned graphene heterostructures

The supermoir\'e lattice, built by stacking two moir\'e patterns, provides a platform for creating flat mini-bands and studying electron correlations. An ultimate challenge in assembling a graphene supermoir\'e lattice is in the deterministic control of its rotational alignment, which is made highly aleatory due to the random nature of the edge chirality and crystal symmetry of each component layer. Employing the so-called golden rule of three, here we present an experimental strategy to overcome this challenge and realize the controlled alignment of double-aligned hBN/graphene/hBN supermoir\'e lattice, where graphene is precisely aligned with both top hBN and bottom hBN. Remarkably, we find that the crystallographic edge of neighboring graphite can be used to better guide the stacking alignment, as demonstrated by the controlled production of 20 moir\'e samples with an accuracy better than 0.2 degree. Finally, we extend our technique to other strongly correlated electron systems, such as low-angle twisted bilayer graphene and ABC-stacked trilayer graphene, providing a strategy for flat-band engineering in these moir\'e materials.

cond-mat.mes-hall↗

arXiv2022

Orbital hybridization-driven charge density wave transition in CsV3Sb5 kagome superconductor

Owing to its inherent non-trivial geometry, the unique structural motif of the recently discovered Kagome topological superconductor AV3Sb5 is an ideal host of diverse topologically non-trivial phenomena, including giant anomalous Hall conductivity, topological charge order, charge density wave, and unconventional superconductivity. Despite possessing a normal-state CDW order in the form of topological chiral charge order and diverse superconducting gaps structures, it remains unclear how fundamental atomic-level properties and many-body effects including Fermi surface nesting, electron-phonon coupling, and orbital hybridization contribute to these symmetry-breaking phenomena. Here, we report the direct participation of the V3d-Sb5p orbital hybridization in mediating the CDW phase transition in CsV3Sb5. The combination of temperature-dependent X-ray absorption and first principles studies clearly indicate the Inverse Star of David structure as the preferred reconstruction in the low-temperature CDW phase. Our results highlight the critical role that Sb orbitals plays and establish orbital hybridization as the direct mediator of the CDW states and structural transition dynamics in Kagome unconventional superconductors. This is a significant step towards the fundamental understanding and control of the emerging correlated phases from the Kagome lattice through the orbital interactions and provide promising approaches to novel regimes in unconventional orders and topology.

cond-mat.supr-con↗

arXiv2021

Coexisting charge-ordered states with distinct driving mechanisms in monolayer VSe$_2$

Thinning crystalline materials to two dimensions (2D) creates a rich playground for electronic phases, including charge, spin, superconducting, and topological order. Bulk materials hosting charge density waves (CDWs), when reduced to ultrathin films, have shown CDW enhancement and tunability. However, charge order confined to only 2D remains elusive. Here we report a distinct charge ordered state emerging in the monolayer limit of $1T$-VSe$_2$. Systematic scanning tunneling microscopy experiments reveal that bilayer VSe$_2$ largely retains the bulk electronic structure, hosting a tri-directional CDW. However, monolayer VSe$_2$ -- consistently across distinct substrates -- exhibits a dimensional crossover, hosting two CDWs with distinct wavelengths and transition temperatures. Electronic structure calculations reveal that while one CDW is bulk-like and arises from the well-known Peierls mechanism, the other is decidedly unconventional. The observed CDW-lattice decoupling and the emergence of a flat band suggest that the new CDW could arise from enhanced electron-electron interactions in the 2D limit. These findings establish monolayer-VSe$_2$ as a host of coexisting charge orders with distinct origins, and enable the tailoring of electronic phenomena via emergent interactions in 2D materials.

cond-mat.str-el↗

arXiv2021

Epitaxial Growth of Ultraflat Bismuthene with Large Topological Band Inversion Enabled by Substrate-Orbital-Filtering Effect

Quantum spin Hall (QSH) systems hold promises of low-power-consuming spintronic devices, yet their practical applications are extremely impeded by the small energy gaps. Fabricating QSH materials with large gaps, especially under the guidance of design principles, is essential for both scientific research and practical applications. Here, we demonstrate that large on-site atomic spin-orbit coupling can be directly exploited via the intriguing substrate-orbital-filtering effect to generate large-gap QSH systems and experimentally realized on the epitaxially synthesized ultraflat bismuthene on Ag(111). Theoretical calculations reveal that the underlying substrate selectively filters Bi pz orbitals away from the Fermi level, leading pxy orbitals with nonzero magnetic quantum numbers, resulting in large topological gap of ~1 eV at the K point. The corresponding topological edge states are identified through scanning tunneling spectroscopy combined with density functional theory calculations. Our findings provide general strategies to design large-gap QSH systems and further explore their topology-related physics.

cond-mat.mes-hall↗

arXiv2021

Room temperature ferromagnetism of monolayer chromium telluride with perpendicular magnetic anisotropy

The realization of long-range magnetic ordering in two-dimensional (2D) systems can potentially revolutionize next-generation information technology. Here, we report the successful fabrication of crystalline Cr3Te4 monolayers with room temperature ferromagnetism. Using molecular beam epitaxy, the growth of 2D Cr3Te4 films with monolayer thickness is demonstrated at low substrate temperatures (~100C), compatible with Si CMOS technology. X-ray magnetic circular dichroism measurements reveal a Curie temperature (Tc) of ~344 K for the Cr3Te4 monolayer with an out-of-plane magnetic easy axis, which decreases to ~240 K for the thicker film (~ 7 nm) with an in-plane easy axis. The enhancement of ferromagnetic coupling and the magnetic anisotropy transition is ascribed to interfacial effects, in particular the orbital overlap at the monolayer Cr3Te4/graphite interface, supported by density-functional theory calculations. This work sheds light on the low-temperature scalable growth of 2D nonlayered materials with room temperature ferromagnetism for new magnetic and spintronic devices.

cond-mat.mtrl-sci↗

arXiv2017

Experimental realization of graphene-like borophene

We report a successful preparation of a purely honeycomb, graphene-like borophene, by using an Al(111) surface as the substrate and molecular beam epitaxy (MBE) growth in ultrahigh vacuum. Our scanning tunneling microscopy (STM) reveals perfect monolayer borophene with planar, non-buckled honeycomb lattice similar as graphene. Theoretical calculations show that the honeycomb borophene on Al(111) is energetically stable. Remarkably, nearly one electron charge is transferred to each boron atom from the Al(111) substrate and stabilizes the honeycomb borophene structure, in contrast to the little charge transfer in borophene/Ag(111) case. This work demonstrates that the borophene lattice can be manipulated by controlling the charge transfer between the substrate and the borophene film.

cond-mat.mes-hall↗

arXiv2017

Strain-Induced Band Engineering in Monolayer Stanene on Sb(111)

Two-dimensional (2D) allotrope of tin with low buckled honeycomb structure, named as stanene, is proposed to be an ideal 2D topological insulator with a nontrivial gap larger than 0.1 eV. Theoretical works also pointed out the topological property of stanene occurs by strain tuning. In this letter, we report the successful realization of high quality, monolayer stanene film as well as monolayer stanene nanoribbons on Sb(111) surface by molecular beam epitaxy, providing an ideal platform to the study of stanene. More importantly, we observed a continuous evolution of the electronic bands of stanene across a nanoribbon, which are related to the strain field gradient in stanene. Our work experimentally confirmed that strain is an effective method for band engineering in stanene, which is important for fundamental research and application of stanene.

cond-mat.mtrl-sci↗

arXiv2017

Synthesis of Borophene Nanoribbons on Ag(110) Surface

We present the successful synthesis of single-atom-thick borophene nanoribbons (BNRs) by self-assembly of boron on Ag(110) surface. The scanning tunneling microscopy (STM) studies reveal high quality BNRs: all the ribbons are along the [-110] direction of Ag(110), and can run across the steps on the surface. The width of ribbons is distributed in a narrow range around 10.3 nm. High resolution STM images revealed four ordered surface structures in BNRs. Combined with DFT calculations, we found that all the four structures of boron nanoribbons consist of the boron chains with different width, separated by hexagonal hole arrays. The successful synthesis of BNRs enriches the low dimensional allotrope of boron and may promote further applications of borophene

cond-mat.mtrl-sci↗