Searcharxiv⌕ Search

arXiv subjects

Jian Liu

Publications and source records attributed to Jian Liu.

At least 343 records · Page 19Linked to original sources

Demonstration of Parametric Instability suppression through optical feedback

We demonstrate the suppression of parametric instability using through optical actuation in an electro-optical feedback loop, stabilising the high order optical mode content in an 80 metre long Fabry-Perot cavity. The loop suppression of the high order mode is achieved by injecting a high order mode with the same frequency and opposite phase. Frequency matching is achieved by measuring the beat note signal between the fundamental and high order mode in transmission of the cavity and applying that signal to an electro-optical modulator to create the required frequency sideband. Spatial mode matching of the sideband to the high order mode is accomplished through the inherent mode overlap between the input injected beam and the high order mode of the cavity. The paper presents the theoretical analysis and experimental demonstration of parametric instability suppression, for an instability which would normally ring up with a parametric gain of approximately 2.5.

physics.optics↗

Radiation hardness study on a CMOS pixel sensor for charged particle tracking

A CMOS pixel sensor, named Supix-1, is developed for a pixelated silicon tracker for the Circular Electron-Positron Collider (CEPC) project. The sensor, consisted of nine sectors varying in pixel sizes, diode sizes and geometries, is fabricated with a 180 nm CMOS Image Sensor (CIS) process to study the particle detection performance of enlarged pixels. In this work, the radiation-induced effects on the charge collection of the sensor under the fluence of 1 $\times$ 10^13 1 MeV neq/cm^2 are studied by the measurements with the radioactive source of Fe-55 and the Technology Computer Aided Design (TCAD) simulations, since the radiation hardness of 6.8 $\times$ 10^12 1 MeV neq/cm^2 per year for Non-Ionizing Energy Loss (NIEL) effects is required. In measurements, the sensor gain has been calibrated using the k-$α$ peak of Fe-55 before and after irradiation. The pixel-wise equivalent noise charge (ENC), charge collection efficiency (CCE) and signal-to-noise ratio (SNR) were evaluated. The radiation-induced effects on cluster properties are studied through a self-developed reconstruction algorithm. In TCAD simulations, charge collections in 5 $\times$ 5 pixel matrixes for two typical impinging cases of incident particles were simulated with and without irradiation. Both measurements and simulations indicate that enlarged pixels with area of 21 $μ$m $\times$ 84 $μ$m, though suffering greater loss on sensor performance than small pixels do, still have satisfactory noise and charge collection performance after irradiation for particle tracking in the upcoming collider detectors.

physics.ins-det↗

On-chip integrated Yb3+-doped waveguide amplifiers on thin film lithium niobate

We report the fabrication and optical characterization of Yb3+-doped waveguide amplifiers (YDWA) on the thin film lithium niobate fabricated by photolithography assisted chemo-mechanical etching. The fabricated Yb3+-doped lithium niobate waveguides demonstrates low propagation loss of 0.13 dB/cm at 1030 nm and 0.1 dB/cm at 1060 nm. The internal net gain of 5 dB at 1030 nm and 8 dB at 1060 nm are measured on a 4.0 cm long waveguide pumped by 976nm laser diodes, indicating the gain per unit length of 1.25 dB/cm at 1030 nm and 2 dB/cm at 1060 nm, respectively. The integrated Yb3+-doped lithium niobate waveguide amplifiers will benefit the development of a powerful gain platform and are expected to contribute to the high-density integration of thin film lithium niobate based photonic chip.

physics.optics↗

Annihilators and dimensions of the singularity category

Let R be a commutative noetherian ring. We prove that if R is either an equidimensional finitely generated algebra over a perfect field, or an equidimensional equicharacteristic complete local ring with a perfect residue field, then the annihilator of the singularity category of R coincides with the Jacobian ideal of R up to radical. We establish a relation between the annihilator of the singularity category of R and the cohomological annihilator of R under some mild assumptions. Finally, we give an upper bound for the dimension of the singularity category of an equicharacteristic excellent local ring with isolated singularity. This extends a result of Dao and Takahashi to non Cohen-Macaulay rings.

math.AC↗

Monolithically integrated waveguide-coupled single-frequency microlaser on erbium-doped thin film lithium niobate

We overcome the difficulty in realizing a monolithic waveguide-coupled microring laser integrated on erbium-doped thin film lithium niobate (Er: TFLN) using photolithography assisted chemo-mechanical etching (PLACE) technique. We demonstrate an integrated single-frequency microring laser operating around 1531 nm wavelength. The PLACE technique, enabling integrated Er: TFLN photonics with low propagation loss, can thus be used to realize low cost mass production of monolithic on-chip microlasers with applications ranging from optical communication and photonic integrated circuit (PIC) to precision metrology and large-scale sensing.

physics.optics↗

Label Relation Graphs Enhanced Hierarchical Residual Network for Hierarchical Multi-Granularity Classification

Hierarchical multi-granularity classification (HMC) assigns hierarchical multi-granularity labels to each object and focuses on encoding the label hierarchy, e.g., ["Albatross", "Laysan Albatross"] from coarse-to-fine levels. However, the definition of what is fine-grained is subjective, and the image quality may affect the identification. Thus, samples could be observed at any level of the hierarchy, e.g., ["Albatross"] or ["Albatross", "Laysan Albatross"], and examples discerned at coarse categories are often neglected in the conventional setting of HMC. In this paper, we study the HMC problem in which objects are labeled at any level of the hierarchy. The essential designs of the proposed method are derived from two motivations: (1) learning with objects labeled at various levels should transfer hierarchical knowledge between levels; (2) lower-level classes should inherit attributes related to upper-level superclasses. The proposed combinatorial loss maximizes the marginal probability of the observed ground truth label by aggregating information from related labels defined in the tree hierarchy. If the observed label is at the leaf level, the combinatorial loss further imposes the multi-class cross-entropy loss to increase the weight of fine-grained classification loss. Considering the hierarchical feature interaction, we propose a hierarchical residual network (HRN), in which granularity-specific features from parent levels acting as residual connections are added to features of children levels. Experiments on three commonly used datasets demonstrate the effectiveness of our approach compared to the state-of-the-art HMC approaches and fine-grained visual classification (FGVC) methods exploiting the label hierarchy.

cs.CV↗

Spatiotemporal 2-D Channel Coding for Very Low Latency Reliable MIMO Transmission

To fully support vertical industries, 5G and its corresponding channel coding are expected to meet requirements of different applications. However, for applications of 5G and beyond 5G (B5G) such as URLLC, the transmission latency is required to be much shorter than that in eMBB. Therefore, the resulting channel code length reduces drastically. In this case, the traditional 1-D channel coding suffers a lot from the performance degradation and fails to deliver strong reliability with very low latency. To remove this bottleneck, new channel coding scheme beyond the existing 1-D one is in urgent need. By making full use of the spacial freedom of massive MIMO systems, this paper devotes itself in proposing a spatiotemporal 2-D channel coding for very low latency reliable transmission. For a very short time-domain code length $N^{\text{time}}=16$, $64 \times 128$ MIMO system employing the proposed spatiotemporal 2-D coding scheme successfully shows more than $3$\,dB performance gain at $\text{FER}=10^{-3}$, compared to the 1-D time-domain channel coding. It is noted that the proposed coding scheme is suitable for different channel codes and enjoys high flexibility to adapt to difference scenarios. By appropriately selecting the code rate, code length, and the number of codewords in the time and space domains, the proposed coding scheme can achieve a good trade-off between the transmission latency and reliability.

cs.IT↗

Extraction of the second and fourth radial moments of nuclear charge density from the elastic electron-nucleus scattering

The expression for the radial moments $\left\langle r^{n}\right\rangle_{c}$ of the nuclear charge density has been discussed under the plane wave Born approximation (PWBA) method recently, which is significant to investigate the nuclear surface thickness and neutron distribution radius. In this paper, we extend the studies of extracting second-order moment $\left\langle r^{2}\right\rangle_{c}$ and fourth-order moment $\left\langle r^{4}\right\rangle_{c}$ from the Coulomb form factors $|F_{C}(q)|^2$ by the distorted wave Born approximation (DWBA) at the small momentum transfer $ q $ region. Based on the relativistic mean-field (RMF) calculations, the DWBA form factors $F_{C}^{DW}(q)$ are expanded into $ q^4 $, where the corresponding charge distributions are corrected by the contributions of neutron and spin-orbit densities. In the small $ q $ region, it is found that the experimental $|F_{C}(q)|^2$ can be well reproduced by considering the contributions of the $\left\langle r^{4}\right\rangle_{c}$ at the small $ q $ region. Through further analyzing the second-order and fourth-order expansion coefficients of the $F_{C}^{DW}(q)$, the relationship between the expansion coefficients and proton number $ Z $ is obtained. By the relationship, we extract the $\left\langle r^{2}\right\rangle_{c}$ and $\left\langle r^{4}\right\rangle_{c}$ from the limited experimental data of form factors at the small $ q $ region. Within the permissible range of error, the extracted $\left\langle r^{n}\right\rangle_{c}$ are consistent with the experimental data in this paper.

nucl-th↗

Accurate force field of two-dimensional ferroelectrics from deep learning

The discovery of two-dimensional (2D) ferroelectrics with switchable out-of-plane polarization such as monolayer $α$-In$_2$Se$_3$ offers a new avenue for ultrathin high-density ferroelectric-based nanoelectronics such as ferroelectric field effect transistors and memristors. The functionality of ferroelectrics depends critically on the dynamics of polarization switching in response to an external electric/stress field. Unlike the switching dynamics in bulk ferroelectrics that have been extensively studied, the mechanisms and dynamics of polarization switching in 2D remain largely unexplored. Molecular dynamics (MD) using classical force fields is a reliable and efficient method for large-scale simulations of dynamical processes with atomic resolution. Here we developed a deep neural network-based force field of monolayer In$_2$Se$_3$ using a concurrent learning procedure that efficiently updates the first-principles-based training database. The model potential has accuracy comparable with density functional theory (DFT), capable of predicting a range of thermodynamic properties of In$_2$Se$_3$ polymorphs and lattice dynamics of ferroelectric In$_2$Se$_3$. Pertinent to the switching dynamics, the model potential also reproduces the DFT kinetic pathways of polarization reversal and 180$^\circ$ domain wall motions. Moreover, isobaric-isothermal ensemble MD simulations predict a temperature-driven $α\rightarrow β$ phase transition at the single-layer limit, as revealed by both local atomic displacement and Steinhardt's bond orientational order parameter $Q_4$. Our work paves the way for further research on the dynamics of ferroelectric $α$-In$_2$Se$_3$ and related systems.

cond-mat.mtrl-sci↗

MAAC: Novel Alert Correlation Method To Detect Multi-step Attack

With the continuous improvement of attack methods, there are more and more distributed, complex, targeted attacks in which the attackers use combined attack methods to achieve the purpose. Advanced cyber attacks include multiple stages to achieve the ultimate goal. Traditional intrusion detection systems such as endpoint security management tools, firewalls, and other monitoring tools generate a large number of alerts during the attack. These alerts include attack clues, as well as many false positives unrelated to attacks. Security analysts need to analyze a large number of alerts and find useful clues from them and reconstruct attack scenarios. However, most traditional security monitoring tools cannot correlate alerts from different sources, so many multi-step attacks are still completely unnoticed, requiring manual analysis by security analysts like finding a needle in a haystack. We propose MAAC, a multi-step attack alert correlation system, which reduces repeated alerts and combines multi-step attack paths based on alert semantics and attack stages. The evaluation results of the real-world datasets show that MAAC can effectively reduce the alerts by 90\% and find attack paths from a large number of alerts.

cs.CR↗

The Accurate Particle Tracer Code

The Accurate Particle Tracer (APT) code is designed for large-scale particle simulations on dynamical systems. Based on a large variety of advanced geometric algorithms, APT possesses long-term numerical accuracy and stability, which are critical for solving multi-scale and non-linear problems. Under the well-designed integrated and modularized framework, APT serves as a universal platform for researchers from different fields, such as plasma physics, accelerator physics, space science, fusion energy research, computational mathematics, software engineering, and high-performance computation. The APT code consists of seven main modules, including the I/O module, the initialization module, the particle pusher module, the parallelization module, the field configuration module, the external force-field module, and the extendible module. The I/O module, supported by Lua and Hdf5 projects, provides a user-friendly interface for both numerical simulation and data analysis. A series of new geometric numerical methods and key physical problems, such as runaway electrons in tokamaks and energetic particles in Van Allen belt, have been studied using APT. As an important realization, the APT-SW version has been successfully distributed on the world's fastest computer, the Sunway TaihuLight supercomputer, by supporting master-slave architecture of Sunway many-core processors.

physics.plasm-ph↗

Solving Aspect Category Sentiment Analysis as a Text Generation Task

Aspect category sentiment analysis has attracted increasing research attention. The dominant methods make use of pre-trained language models by learning effective aspect category-specific representations, and adding specific output layers to its pre-trained representation. We consider a more direct way of making use of pre-trained language models, by casting the ACSA tasks into natural language generation tasks, using natural language sentences to represent the output. Our method allows more direct use of pre-trained knowledge in seq2seq language models by directly following the task setting during pre-training. Experiments on several benchmarks show that our method gives the best reported results, having large advantages in few-shot and zero-shot settings.

cs.CL↗

Byzantine-robust Federated Learning through Spatial-temporal Analysis of Local Model Updates

Federated Learning (FL) enables multiple distributed clients (e.g., mobile devices) to collaboratively train a centralized model while keeping the training data locally on the client. Compared to traditional centralized machine learning, FL offers many favorable features such as offloading operations which would usually be performed by a central server and reducing risks of serious privacy leakage. However, Byzantine clients that send incorrect or disruptive updates due to system failures or adversarial attacks may disturb the joint learning process, consequently degrading the performance of the resulting model. In this paper, we propose to mitigate these failures and attacks from a spatial-temporal perspective. Specifically, we use a clustering-based method to detect and exclude incorrect updates by leveraging their geometric properties in the parameter space. Moreover, to further handle malicious clients with time-varying behaviors, we propose to adaptively adjust the learning rate according to momentum-based update speculation. Extensive experiments on 4 public datasets demonstrate that our algorithm achieves enhanced robustness comparing to existing methods under both cross-silo and cross-device FL settings with faulty/malicious clients.

cs.LG↗

Triangulated categories of periodic complexes and orbit categories

We investigate the triangulated hull of the orbit categories of the perfect derived category and the bounded derived category of a ring concerning the power of the suspension functor. It turns out that the triangulated hull will correspond to the full subcategory of compact objects of certain triangulated categories of periodic complexes. This specializes to Stai and Zhao's result when the ring is a finite dimensional algebra with finite global dimension over a field. As the first application, if $A,B$ are flat algebras over a commutative ring and they are derived equivalent, then the corresponding derived categories of $n$-periodic complexes are triangle equivalent. As the second application, we get the periodic version of the Koszul duality.

math.CT↗

Spatio-temporal-spectral-angular observation model that integrates observations from UAV and mobile mapping vehicle for better urban mapping

In a complex urban scene, observation from a single sensor unavoidably leads to voids in observations, failing to describe urban objects in a comprehensive manner. In this paper, we propose a spatio-temporal-spectral-angular observation model to integrate observations from UAV and mobile mapping vehicle platform, realizing a joint, coordinated observation operation from both air and ground. We develop a multi-source remote sensing data acquisition system to effectively acquire multi-angle data of complex urban scenes. Multi-source data fusion solves the missing data problem caused by occlusion and achieves accurate, rapid, and complete collection of holographic spatial and temporal information in complex urban scenes. We carried out an experiment on Baisha Town, Chongqing, China and obtained multi-sensor, multi-angle data from UAV and mobile mapping vehicle. We first extracted the point cloud from UAV and then integrated the UAV and mobile mapping vehicle point cloud. The integrated results combined both the characteristic of UAV and mobile mapping vehicle point cloud, confirming the practicability of the proposed joint data acquisition platform and the effectiveness of spatio-temporal-spectral-angular observation model. Compared with the observation from UAV or mobile mapping vehicle alone, the integrated system provides an effective data acquisition solution towards comprehensive urban monitoring.

cs.CV↗

Nucleon momentum distribution of $^{56}\text{Fe}$ from the axially deformed relativistic mean-field model with nucleon--nucleon correlations

Nucleon momentum distribution (NMD), particularly its high-momentum components, is essential for understanding the nucleon--nucleon ($ NN $) correlations in nuclei. Herein, we develop the studies of NMD of $^{56}\text{Fe}$ from the axially deformed relativistic mean-field (RMF) model. Moreover, we introduce the effects of $ NN $ correlation into the RMF model from phenomenological models based on deuteron and nuclear matter. For the region $ k k_{\text{F}} $, the high-momentum components of the RMF model are modified by the effects of $ NN $ correlation, which agree with the experimental data. Comparing the NMD of relativistic and non-relativistic mean-field models, the relativistic effects on nuclear structures in momentum space are analyzed. Finally, by analogizing the tensor correlations in deuteron and Jastrow-type correlations in nuclear matter, the behaviors and contributions of $ NN $ correlations in $^{56}\text{Fe}$ are further analyzed, which helps clarify the effects of the tensor force on the NMD of heavy nuclei.

nucl-th↗

The Effect of Dust and Sand on the 5G Terrestrial Links

Wireless connections are a communication channel used to support different applications in our life such as microwave connections, mobile cellular networks, and intelligent transportation systems. The wireless communication channels are affected by different weather factors such as rain, snow, fog, dust, and sand. This effect is more evident in the high frequencies of the millimeter-wave (mm-wave) band. Recently, the 5G opened the door to support different applications with high speed and good quality. A recent study investigates the effect of rain and snow on the 5G communication channel to reduce the challenge of using high millimeter-wave frequencies. This research investigates the impact of dust and sand on the communication channel of 5G mini links using Mie scattering model to estimate the propagating wave's attenuation by computing the free space loss of a dusty region. Also, the cross-polarization of the propagating wave with dust and sand is taken into account at different distances of the propagating length. Two kinds of mini links, ML-6363, and ML-6352, are considered to demonstrate the effect of dust and sand in these specific operating frequency bands. The 73.5 GHz (V-band) and (21.5GHz (K-band) are the ML-6352 and ML-6363 radio frequency, respectively. Also, signal depolarization is another important radio frequency transmission parameter that is considered heroin. The numerical and simulation results show that the 5G ML-6352 is more effect by dust and sand than ML6363. The 5G toolbox is used to build the communication system and simulate the effect of the dust and sand on the different frequency bands.

eess.SP↗

Impact of Weather Conditions on 5G Communication Channel under Connected Vehicles Framework

Recent research focused on improving the vehicle-to-vehicle communication (V2V) based on the 5G technology. The V2V application is important because it will reduce the risk of accidents up to 70%-80%, improve traffic management, reduce congestion, and improve fuel consumption. Autonomous vehicles applications require a high bandwidth transmission channel where the 5G communication channel would be a reliable solution to support this disruptive technology. The dedicated short-range communications (DSRC), which is characterized with a frequency bandwidth of 5.9 gigahertz (GHz) (4G spectrum), was used as vehicular connectivity with a bandwidth of up to 200 megabytes per second (mb/s) and limited capacity. The 5G band can support connected multiple autonomous vehicles with high data rates and large bandwidth. In this study, the 5G communication channel is considered as vehicular connectivity with high bandwidth in the millimeter waves spectrum range. The quality of 5G wireless communication channels between connected vehicles possibly be affected by weather conditions such as rain, snow, fog, dust, and sand. In this paper, we estimate the effect of dust and sand on the propagation of millimeter waves. The Mie model is used to investigate the effect of dust and sand storms on the propagating mm-waves. The effect of dust and sand on the communication path loss of DSRC and 5G frequency band is investigated in the case of urban freeway and rural highway settings. Results show that the attenuation of dust and sand is changed when the particle size of sand, frequency of propagating wave, and concentration of dust are changed. Finally, the new model of link margin is created to estimate the effect of dust and sand on DSCR (5.9 GHz) and 5G (28 GHz) communication path loss.

cs.NI↗