arXiv subjects

Jian Wu

Publications and source records attributed to Jian Wu.

At least 397 records · Page 22Linked to original sources

arXiv2017

Self-started stable pulsing operation of random fiber laser

Unlike traditional fiber laser with defined resonant cavity, random fiber laser (RFL), whose operation is based on distributed gain and feedback via Rayleigh scattering and stimulated Raman scattering in long passive fiber, has fundamental scientific challenges in pulsing operation for its remarkable cavity-free feature. Here, we propose and experimentally realize the passively spatiotemporal gain modulation induced self-started stable pulsing operation of counter-pumped RFL. Thanks to the good temporal stability of employed pumping amplified spontaneous emission source and the superiority of this pulse generation scheme, stable and regular pulse train can be obtained. Furthermore, the pump hysteresis and bistability phenomena with the generation of high order Stokes light is presented and the dynamics of pulsing operation is discussed. This work extends our comprehension of temporal property of RFL and provides an effective novel avenue for the exploration of pulsed RFL with structural simplicity, low cost and stable output.

physics.optics↗

arXiv2017

High power highly stable passively Q-switched fiber laser based on monolayer graphene

We demonstrate a monolayer graphene based passively Q-switched fiber laser with three-stage amplifiers that can deliver over 80 W average power at 1064 nm. The highest average power achieved is 84.1 W, with pulse energy of 1.67 mJ. To the best of our knowledge, this is the first time for a high power passively Q-switched fiber laser in the 1 um range reported so far. More importantly, the Q-switched fiber laser operates stably during a week few-hours-per-a-day tests, which proves the stability and practical application value of graphene in high power pulsed fiber lasers.

physics.optics↗

arXiv2017

3FGL J1924.8-1034 : A Spatially-Extended Stable Unidentified GeV Source?

Milky Way-like galaxies are predicted to host a very large number of dark matter subhalos. Some massive and nearby subhalos could generate detectable gamma-rays, appearing as unidentified, spatially-extended and stable gamma-ray sources. We search for such sources in the third Fermi Large Area Telescope source List (3FGL) and report the identification of a new candidate, 3FGL J1924.8-1034. With the Fermi-LAT Pass 8 data, we find that 3FGL J1924.8-1034 is spatially-extended at a high confidence level of $5.4σ$, with a best-fit extension radius of $\sim0.15^{\circ}$. No significant variability has been found and its gamma-ray spectrum is well fitted by the dark matter annihilation into $b\bar{b}$ with a mass of $\sim 43$ GeV. All these facts make 3FGL J1924.8-1034 a possible dark matter subhalo candidate. However, due to the limited angular resolution, the possibility of that the spatial extension of 3FGL J1924.8-1034 is caused by the contamination from the other un-resolved point source can not be ruled out.

astro-ph.HE↗

arXiv2017

Orbital-driven Mottness collapse in 1T-TaS2-xSex transition metal dichalcogenide

The vicinity of a Mott insulating phase has constantly been a fertile ground for finding exotic quantum states, most notably the high Tc cuprates and colossal magnetoresistance manganites. The layered transition metal dichalcogenide 1T-TaS2 represents another intriguing example, in which the Mott insulator phase is intimately entangled with a series of complex charge-density-wave (CDW) orders. More interestingly, it has been recently found that 1T-TaS2 undergoes a Mott-insulator-to-superconductor transition induced by high pressure, charge doping, or isovalent substitution. The nature of the Mott insulator phase and transition mechanism to the conducting state is still under heated debate. Here, by combining scanning tunneling microscopy (STM) measurements and first-principles calculations, we investigate the atomic scale electronic structure of 1T-TaS2 Mott insulator and its evolution to the metallic state upon isovalent substitution of S with Se. We identify two distinct types of orbital textures - one localized and the other extended - and demonstrates that the interplay between them is the key factor that determines the electronic structure. Especially, we show that the continuous evolution of the charge gap visualized by STM is due to the immersion of the localized-orbital-induced Hubbard bands into the extended-orbital-spanned Fermi sea, featuring a unique evolution from a Mott gap to a charge-transfer gap. This new mechanism of orbital-driven Mottness collapse revealed here suggests an interesting route for creating novel electronic state and designing future electronic devices.

cond-mat.str-el↗

arXiv2017

Spatiotemporal steering of photoelectron emission in multiphoton above-threshold ionization

We experimentally demonstrate spatiotemporal steering of photoelectron emission in multiphoton above-threshold single ionization of atoms exposed to a phase-controlled orthogonally polarized two-color (OTC) laser pulse. Spatial and energy resolved photoelectron angular distributions are measured as a function of the laser phase, allowing us to look into the fine structures and emission dynamics. The slow and fast photoelectrons, distinguished by the energy larger or smaller than 2Up with Up being the ponderomotive energy of a free electron in the laser field, have distinct spatiotemporal dependences of the laser waveform. The phase-of-phase of the slow electron oscillates as functions of both the energy and emission direction, however, the fast electron present rather flat phase structure which merely depends on its emission direction. Three-dimensional generalized quantum trajectory Monte Carlo simulations are performed to explore the sub-cycle dynamics of the electron emission in the phase-controlled OTC pulse.

physics.optics↗

arXiv2017

Incoherently pumped high-power linearly-polarized single-mode random fiber laser: experimental investigations and theoretical prospects

We present a hundred-watt-level linearly-polarized random fiber laser (RFL) pumped by incoherent broadband amplified spontaneous emission (ASE) source and prospect the power scaling potential theoretically. The RFL employs half-opened cavity structure which is composed by a section of 330 m polarization maintained (PM) passive fiber and two PM high reflectivity fiber Bragg gratings. The 2nd order Stokes light centered at 1178 nm reaches the pump limited maximal power of 100.7 W with a full width at half-maximum linewidth of 2.58 nm and polarization extinction ratio of 23.5 dB. The corresponding ultimate quantum efficiency of pump to 2nd order Stokes light is 89.01%. To the best of our knowledge, this is the first demonstration of linearly-polarized high-order RFL with hundred-watt output power. Furthermore, the theoretical investigation indicates that 300 W-level linearly-polarized single-mode 1st order Stokes light can be obtained from incoherently pumped RFL with 100 m PM passive fiber.

physics.optics↗

arXiv2016

Disentangling the role of laser coupling in directional breaking of molecules

The directional control of molecular dissociation with the laser electric field waveform is a paradigm and was demonstrated for a variety of molecules. In most cases, the directional control occurs via a dissociative ionization pathway. The role of laser-induced coupling of electronic states in the dissociating ion versus selective ionization of oriented neutral molecules, however, could not be distinguished for even small heteronuclear molecules such as CO. Here, we introduce a technique, using elliptically polarized pump and linearly polarized two-color probe pulses that unambiguously distinguishes the roles of laser-induced state coupling and selective ionization. The measured photoelectron momentum distributions governed by the light polarizations allow us to coincidently identify the ionization and dissociation from the pump and probe pulses. Directional dissociation of CO+ as a function of the relative phase of the linearly polarized two-color pulse is observed for both parallel and orthogonally oriented molecules. We find that the laser-induced coupling of various electronic states of CO+ plays an important role for the observed directional bond breaking, which is verified by quantum calculations.

physics.optics↗

arXiv2016

Molecular echoes in space and time

Mountain echoes are a well-known phenomenon, where an impulse excitation is mirrored by the rocks to generate a replica of the original stimulus, often with reverberating recurrences. For spin echoes in magnetic resonance and photon echoes in atomic and molecular systems the role of the mirror is played by a second, time delayed pulse which is able to reverse the ow of time and recreate the original event. Recently, laser-induced rotational alignment and orientation echoes were introduced for molecular gases, and discussed in terms of rotational-phase-space filamentation. Here we present, for the first time, a direct spatiotemporal analysis of various molecular alignment echoes by means of coincidence Coulomb explosion imaging. We observe hitherto unreported spatially rotated echoes, that depend on the polarization direction of the pump pulses, and find surprising imaginary echoes at negative times.

physics.optics↗

arXiv2016

Multi-modal Fusion for Diabetes Mellitus and Impaired Glucose Regulation Detection

Effective and accurate diagnosis of Diabetes Mellitus (DM), as well as its early stage Impaired Glucose Regulation (IGR), has attracted much attention recently. Traditional Chinese Medicine (TCM) [3], [5] etc. has proved that tongue, face and sublingual diagnosis as a noninvasive method is a reasonable way for disease detection. However, most previous works only focus on a single modality (tongue, face or sublingual) for diagnosis, although different modalities may provide complementary information for the diagnosis of DM and IGR. In this paper, we propose a novel multi-modal classification method to discriminate between DM (or IGR) and healthy controls. Specially, the tongue, facial and sublingual images are first collected by using a non-invasive capture device. The color, texture and geometry features of these three types of images are then extracted, respectively. Finally, our so-called multi-modal similar and specific learning (MMSSL) approach is proposed to combine features of tongue, face and sublingual, which not only exploits the correlation but also extracts individual components among them. Experimental results on a dataset consisting of 192 Healthy, 198 DM and 114 IGR samples (all samples were obtained from Guangdong Provincial Hospital of Traditional Chinese Medicine) substantiate the effectiveness and superiority of our proposed method for the diagnosis of DM and IGR, compared to the case of using a single modality.

cs.CV↗

arXiv2016

Dirac semimetal phase in the hexagonal LiZnBi

Based on first-principles calculations, we find that LiZnBi, a metallic hexagonal $ABC$ compound, can be driven into a Dirac semimetal with a pair of Dirac points by strain. The nontrivial topological nature of the strained LiZnBi is directly demonstrated by calculating its $\mathbb{Z}_2$ index and the surface states, where the Fermi arcs are clearly observed. The low-energy states as well as topological properties are shown to be sensitive to the strain configurations. The finding of Dirac semimetal phase in LiZnBi may intrigue further researches on the topological properties of hexagonal $ABC$ materials and promote new practical applications.

cond-mat.mtrl-sci↗

arXiv2015

Converting normal insulators into topological insulators via tuning orbital levels

Tuning the spin-orbit coupling strength via foreign element doping and/or modifying bonding strength via strain engineering are the major routes to convert normal insulators to topological insulators. We here propose an alternative strategy to realize topological phase transition by tuning the orbital level. Following this strategy, our first-principles calculations demonstrate that a topological phase transition in some cubic perovskite-type compounds CsGeBr$_3$ and CsSnBr$_3$ could be facilitated by carbon substitutional doping. Such unique topological phase transition predominantly results from the lower orbital energy of the carbon dopant, which can pull down the conduction bands and even induce band inversion. Beyond conventional approaches, our finding of tuning the orbital level may greatly expand the range of topologically nontrivial materials.

cond-mat.mtrl-sci↗

arXiv2015

Exploring Multiwavelength AGN Variability with Swift Archival Data

We are conducting an archival Swift program to measure multiwavelength variability in active galactic nuclei (AGN). This variability information will provide constraints on the geometry, physical conditions and processes of the structures around the central black holes that emit and reprocess the observed flux. Among our goals are: (1) to produce a catalog of type 1 AGN with time-resolved multi-wavelength data; (2) to characterize variability in the optical, UV and X-ay bands as well as changes in spectral slope; (3) to quantify the impact of variability on multi-wavelength properties; and (4) to measure correlated variability between bands. Our initial efforts have revealed a UVOT calibration issue that can cause a few percent of measured UV fluxes to be anomalously low, by up to 30%.

astro-ph.HE↗

arXiv2015

Modal and nonmodal stability analysis of electrohydrodynamic flow with and without cross-flow

We report the results of a complete modal and nonmodal linear stability analysis of the electrohydrodynamic flow (EHD) for the problem of electroconvection in the strong injection region. Convective cells are formed by Coulomb force in an insulating liquid residing between two plane electrodes subject to unipolar injection. Besides pure electroconvection, we also consider the case where a cross-flow is present, generated by a streamwise pressure gradient, in the form of a laminar Poiseuille flow. The effect of charge diffusion, often neglected in previous linear stability analyses, is included in the present study and a transient growth analysis, rarely considered in EHD, is carried out. In the case without cross-flow, a non-zero charge diffusion leads to a lower linear stability threshold and thus to a more unstable low. The transient growth, though enhanced by increasing charge diffusion, remains small and hence cannot fully account for the discrepancy of the linear stability threshold between theoretical and experimental results. When a cross-flow is present, increasing the strength of the electric field in the high-$Re$ Poiseuille flow yields a more unstable flow in both modal and nonmodal stability analyses. Even though the energy analysis and the input-output analysis both indicate that the energy growth directly related to the electric field is small, the electric effect enhances the lift-up mechanism. The symmetry of channel flow with respect to the centerline is broken due to the additional electric field acting in the wall-normal direction. As a result, the centers of the streamwise rolls are shifted towards the injector electrode, and the optimal spanwise wavenumber achieving maximum transient energy growth increases with the strength of the electric field.

physics.flu-dyn↗

arXiv2014

Decomposable stationary distribution of a multidimensional SRBM

We call a multidimensional distribution to be decomposable with respect to a partition of two sets of coordinates if the original distribution is the product of the marginal distributions associated with these two sets. We focus on the stationary distribution of a multidimensional semimartingale reflecting Brownian motion (SRBM) on a nonnegative orthant. An SRBM is uniquely determined (in distribution) by its data that consists of a covariance matrix, a drift vector, and a reflection matrix. Assume that the stationary distribution of an SRBM exists. We first characterize two marginal distributions under the decomposability assumption. We prove that they are the stationary distributions of some lower dimensional SRBMs. We also identify the data for these lower dimensional SRBMs. Thus, under the decomposability assumption, we can obtain the stationary distribution of the original SRBM by computing those of the lower dimensional ones. However, this characterization of the marginal distributions is not sufficient for the decomposability. So, we next consider necessary and sufficient conditions for the decomposability. We obtain those conditions for several classes of SRBMs. These classes include SRBMs arising from Brownian models of queueing networks that have two sets of stations with feed-forward routing between these two sets. This work is motivated by applications of SRBMs and geometric interpretations of the product form stationary distributions.

math.PR↗

arXiv2014

Visualizing molecular unidirectional rotation

A molecule can be optically accelerated to rotate unidirectionally at a frequency of a few terahertzes which is many orders higher than the classical mechanical rotor. Such a photon-induced ultrafast molecular unidirectional rotation has been well explored as a controllable spin of the molecular nuclear wave packet. Although it has been observed for more than 10 years, a complete imaging of the unidirectional rotating nuclear wave packet is still missing, which is essentially the cornerstone of all the exploring applications. Here, for the first time, we experimentally visualize the time-dependent evolution of the double-pulse excited molecular unidirectional rotation by Coulomb explosion imaging the rotational nuclear wave packet. Our results reveal comprehensive details undiscovered in pioneering measurements, which exhibits as a joint of the quantum revival of the impulsively aligned rotational wave packet and its unidirectional rotation following the angular momentum conservation. The numerical simulations well reproduce the experimental observations and intuitively revivify the thoroughgoing evolution of the rotational wave packet.

physics.optics↗

arXiv2014

Energy-Delay Tradeoffs of Virtual Base Stations With a Computational-Resource-Aware Energy Consumption Model

The next generation (5G) cellular network faces the challenges of efficiency, flexibility, and sustainability to support data traffic in the mobile Internet era. To tackle these challenges, cloud-based cellular architectures have been proposed where virtual base stations (VBSs) play a key role. VBSs bring further energy savings but also demands a new energy consumption model as well as the optimization of computational resources. This paper studies the energy-delay tradeoffs of VBSs with delay tolerant traffic. We propose a computational-resource-aware energy consumption model to capture the total energy consumption of a VBS and reflect the dynamic allocation of computational resources including the number of CPU cores and the CPU speed. Based on the model, we analyze the energy-delay tradeoffs of a VBS considering BS sleeping and state switching cost to minimize the weighted sum of power consumption and average delay. We derive the explicit form of the optimal data transmission rate and find the condition under which the energy optimal rate exists and is unique. Opportunities to reduce the average delay and achieve energy savings simultaneously are observed. We further propose an efficient algorithm to jointly optimize the data rate and the number of CPU cores. Numerical results validate our theoretical analyses and under a typical simulation setting we find more than 60% energy savings can be achieved by VBSs compared with conventional base stations under the EARTH model, which demonstrates the great potential of VBSs in 5G cellular systems.

cs.NI↗

arXiv2014

A multi-dimensional SRBM: Geometric views of its product form stationary distribution

We present a geometric interpretation of a product form stationary distribution for a $d$-dimensional semimartingale reflecting Brownian motion (SRBM) that lives in the nonnegative orthant. The $d$-dimensional SRBM data can be equivalently specified by $d+1$ geometric objects: an ellipse and $d$ rays. Using these geometric objects, we establish necessary and sufficient conditions for characterizing product form stationary distribution. The key idea in the characterization is that we decompose the $d$-dimensional problem to $\frac{1}{2}d(d-1)$ two-dimensional SRBMs, each of which is determined by an ellipse and two rays. This characterization contrasts with the algebraic condition of [14]. A $d$-station tandem queue example is presented to illustrate how the product form can be obtained using our characterization. Drawing the two-dimensional results in [1,7], we discuss potential optimal paths for a variational problem associated with the three-station tandem queue. Except Appendix D, the rest of this paper is almost identical to the QUESTA paper with the same title.

math.PR↗

arXiv2014

A general group theoretical method to unfold band structures and its application

We present a general method to unfold energy bands of supercell calculations to primitive Brillouin zone using group theoretical techniques, where an isomorphic factor group is introduced to connect the primitive translation group with the supercell translation group via a direct product. Originating from the translation group symmetry, our method gives an uniform description of unfolding approaches based on various basis sets, and therefore, should be easy to implement in both tight-binding model and existing ab initio code packages using different basis sets. This makes the method applicable to a variety of problems involving the use of supercells, such as defects, disorder, and interfacial reconstructions. As a realistic example, we calculate electronic properties of an monolayer FeSe on SrTiO$_3$ in checkerboard and collinear antiferromagnetic spin configurations, illustrating the potential of our method.

cond-mat.mtrl-sci↗