arXiv subjects

Jianwu Dang

Publications and source records attributed to Jianwu Dang.

At least 55 records · Page 3Linked to original sources

arXiv2023

Rethinking the visual cues in audio-visual speaker extraction

The Audio-Visual Speaker Extraction (AVSE) algorithm employs parallel video recording to leverage two visual cues, namely speaker identity and synchronization, to enhance performance compared to audio-only algorithms. However, the visual front-end in AVSE is often derived from a pre-trained model or end-to-end trained, making it unclear which visual cue contributes more to the speaker extraction performance. This raises the question of how to better utilize visual cues. To address this issue, we propose two training strategies that decouple the learning of the two visual cues. Our experimental results demonstrate that both visual cues are useful, with the synchronization cue having a higher impact. We introduce a more explainable model, the Decoupled Audio-Visual Speaker Extraction (DAVSE) model, which leverages both visual cues.

cs.SD↗

arXiv2023

Locate and Beamform: Two-dimensional Locating All-neural Beamformer for Multi-channel Speech Separation

Recently, stunning improvements on multi-channel speech separation have been achieved by neural beamformers when direction information is available. However, most of them neglect to utilize speaker's 2-dimensional (2D) location cues contained in mixture signal, which limits the performance when two sources come from close directions. In this paper, we propose an end-to-end beamforming network for 2D location guided speech separation merely given mixture signal. It first estimates discriminable direction and 2D location cues, which imply directions the sources come from in multi views of microphones and their 2D coordinates. These cues are then integrated into location-aware neural beamformer, thus allowing accurate reconstruction of two sources' speech signals. Experiments show that our proposed model not only achieves a comprehensive decent improvement compared to baseline systems, but avoids inferior performance on spatial overlapping cases.

eess.AS↗

arXiv2023

speech and noise dual-stream spectrogram refine network with speech distortion loss for robust speech recognition

In recent years, the joint training of speech enhancement front-end and automatic speech recognition (ASR) back-end has been widely used to improve the robustness of ASR systems. Traditional joint training methods only use enhanced speech as input for the backend. However, it is difficult for speech enhancement systems to directly separate speech from input due to the diverse types of noise with different intensities. Furthermore, speech distortion and residual noise are often observed in enhanced speech, and the distortion of speech and noise is different. Most existing methods focus on fusing enhanced and noisy features to address this issue. In this paper, we propose a dual-stream spectrogram refine network to simultaneously refine the speech and noise and decouple the noise from the noisy input. Our proposed method can achieve better performance with a relative 8.6% CER reduction.

cs.SD↗

arXiv2023

Time-domain Speech Enhancement Assisted by Multi-resolution Frequency Encoder and Decoder

Time-domain speech enhancement (SE) has recently been intensively investigated. Among recent works, DEMUCS introduces multi-resolution STFT loss to enhance performance. However, some resolutions used for STFT contain non-stationary signals, and it is challenging to learn multi-resolution frequency losses simultaneously with only one output. For better use of multi-resolution frequency information, we supplement multiple spectrograms in different frame lengths into the time-domain encoders. They extract stationary frequency information in both narrowband and wideband. We also adopt multiple decoder outputs, each of which computes its corresponding resolution frequency loss. Experimental results show that (1) it is more effective to fuse stationary frequency features than non-stationary features in the encoder, and (2) the multiple outputs consistent with the frequency loss improve performance. Experiments on the Voice-Bank dataset show that the proposed method obtained a 0.14 PESQ improvement.

cs.SD↗

arXiv2023

Cross-modal Audio-visual Co-learning for Text-independent Speaker Verification

Visual speech (i.e., lip motion) is highly related to auditory speech due to the co-occurrence and synchronization in speech production. This paper investigates this correlation and proposes a cross-modal speech co-learning paradigm. The primary motivation of our cross-modal co-learning method is modeling one modality aided by exploiting knowledge from another modality. Specifically, two cross-modal boosters are introduced based on an audio-visual pseudo-siamese structure to learn the modality-transformed correlation. Inside each booster, a max-feature-map embedded Transformer variant is proposed for modality alignment and enhanced feature generation. The network is co-learned both from scratch and with pretrained models. Experimental results on the LRSLip3, GridLip, LomGridLip, and VoxLip datasets demonstrate that our proposed method achieves 60% and 20% average relative performance improvement over independently trained audio-only/visual-only and baseline fusion systems, respectively.

cs.SD↗

arXiv2022

MIMO-DBnet: Multi-channel Input and Multiple Outputs DOA-aware Beamforming Network for Speech Separation

Recently, many deep learning based beamformers have been proposed for multi-channel speech separation. Nevertheless, most of them rely on extra cues known in advance, such as speaker feature, face image or directional information. In this paper, we propose an end-to-end beamforming network for direction guided speech separation given merely the mixture signal, namely MIMO-DBnet. Specifically, we design a multi-channel input and multiple outputs architecture to predict the direction-of-arrival based embeddings and beamforming weights for each source. The precisely estimated directional embedding provides quite effective spatial discrimination guidance for the neural beamformer to offset the effect of phase wrapping, thus allowing more accurate reconstruction of two sources' speech signals. Experiments show that our proposed MIMO-DBnet not only achieves a comprehensive decent improvement compared to baseline systems, but also maintain the performance on high frequency bands when phase wrapping occurs.

eess.AS↗

arXiv2022

MIMO-DoAnet: Multi-channel Input and Multiple Outputs DoA Network with Unknown Number of Sound Sources

Recent neural network based Direction of Arrival (DoA) estimation algorithms have performed well on unknown number of sound sources scenarios. These algorithms are usually achieved by mapping the multi-channel audio input to the single output (i.e. overall spatial pseudo-spectrum (SPS) of all sources), that is called MISO. However, such MISO algorithms strongly depend on empirical threshold setting and the angle assumption that the angles between the sound sources are greater than a fixed angle. To address these limitations, we propose a novel multi-channel input and multiple outputs DoA network called MIMO-DoAnet. Unlike the general MISO algorithms, MIMO-DoAnet predicts the SPS coding of each sound source with the help of the informative spatial covariance matrix. By doing so, the threshold task of detecting the number of sound sources becomes an easier task of detecting whether there is a sound source in each output, and the serious interaction between sound sources disappears during inference stage. Experimental results show that MIMO-DoAnet achieves relative 18.6% and absolute 13.3%, relative 34.4% and absolute 20.2% F1 score improvement compared with the MISO baseline system in 3, 4 sources scenes. The results also demonstrate MIMO-DoAnet alleviates the threshold setting problem and solves the angle assumption problem effectively.

eess.AS↗

arXiv2022

Monolingual Recognizers Fusion for Code-switching Speech Recognition

The bi-encoder structure has been intensively investigated in code-switching (CS) automatic speech recognition (ASR). However, most existing methods require the structures of two monolingual ASR models (MAMs) should be the same and only use the encoder of MAMs. This leads to the problem that pre-trained MAMs cannot be timely and fully used for CS ASR. In this paper, we propose a monolingual recognizers fusion method for CS ASR. It has two stages: the speech awareness (SA) stage and the language fusion (LF) stage. In the SA stage, acoustic features are mapped to two language-specific predictions by two independent MAMs. To keep the MAMs focused on their own language, we further extend the language-aware training strategy for the MAMs. In the LF stage, the BELM fuses two language-specific predictions to get the final prediction. Moreover, we propose a text simulation strategy to simplify the training process of the BELM and reduce reliance on CS data. Experiments on a Mandarin-English corpus show the efficiency of the proposed method. The mix error rate is significantly reduced on the test set after using open-source pre-trained MAMs.

eess.AS↗

arXiv2022

Deep Spectro-temporal Artifacts for Detecting Synthesized Speech

The Audio Deep Synthesis Detection (ADD) Challenge has been held to detect generated human-like speech. With our submitted system, this paper provides an overall assessment of track 1 (Low-quality Fake Audio Detection) and track 2 (Partially Fake Audio Detection). In this paper, spectro-temporal artifacts were detected using raw temporal signals, spectral features, as well as deep embedding features. To address track 1, low-quality data augmentation, domain adaptation via finetuning, and various complementary feature information fusion were aggregated in our system. Furthermore, we analyzed the clustering characteristics of subsystems with different features by visualization method and explained the effectiveness of our proposed greedy fusion strategy. As for track 2, frame transition and smoothing were detected using self-supervised learning structure to capture the manipulation of PF attacks in the time domain. We ranked 4th and 5th in track 1 and track 2, respectively.

cs.SD↗

arXiv2022

VCSE: Time-Domain Visual-Contextual Speaker Extraction Network

Speaker extraction seeks to extract the target speech in a multi-talker scenario given an auxiliary reference. Such reference can be auditory, i.e., a pre-recorded speech, visual, i.e., lip movements, or contextual, i.e., phonetic sequence. References in different modalities provide distinct and complementary information that could be fused to form top-down attention on the target speaker. Previous studies have introduced visual and contextual modalities in a single model. In this paper, we propose a two-stage time-domain visual-contextual speaker extraction network named VCSE, which incorporates visual and self-enrolled contextual cues stage by stage to take full advantage of every modality. In the first stage, we pre-extract a target speech with visual cues and estimate the underlying phonetic sequence. In the second stage, we refine the pre-extracted target speech with the self-enrolled contextual cues. Experimental results on the real-world Lip Reading Sentences 3 (LRS3) database demonstrate that our proposed VCSE network consistently outperforms other state-of-the-art baselines.

cs.CV↗

arXiv2022

Language-specific Characteristic Assistance for Code-switching Speech Recognition

Dual-encoder structure successfully utilizes two language-specific encoders (LSEs) for code-switching speech recognition. Because LSEs are initialized by two pre-trained language-specific models (LSMs), the dual-encoder structure can exploit sufficient monolingual data and capture the individual language attributes. However, most existing methods have no language constraints on LSEs and underutilize language-specific knowledge of LSMs. In this paper, we propose a language-specific characteristic assistance (LSCA) method to mitigate the above problems. Specifically, during training, we introduce two language-specific losses as language constraints and generate corresponding language-specific targets for them. During decoding, we take the decoding abilities of LSMs into account by combining the output probabilities of two LSMs and the mixture model to obtain the final predictions. Experiments show that either the training or decoding method of LSCA can improve the model's performance. Furthermore, the best result can obtain up to 15.4% relative error reduction on the code-switching test set by combining the training and decoding methods of LSCA. Moreover, the system can process code-switching speech recognition tasks well without extra shared parameters or even retraining based on two pre-trained LSMs by using our method.

cs.CL↗

arXiv2022

Iterative Sound Source Localization for Unknown Number of Sources

Sound source localization aims to seek the direction of arrival (DOA) of all sound sources from the observed multi-channel audio. For the practical problem of unknown number of sources, existing localization algorithms attempt to predict a likelihood-based coding (i.e., spatial spectrum) and employ a pre-determined threshold to detect the source number and corresponding DOA value. However, these threshold-based algorithms are not stable since they are limited by the careful choice of threshold. To address this problem, we propose an iterative sound source localization approach called ISSL, which can iteratively extract each source's DOA without threshold until the termination criterion is met. Unlike threshold-based algorithms, ISSL designs an active source detector network based on binary classifier to accept residual spatial spectrum and decide whether to stop the iteration. By doing so, our ISSL can deal with an arbitrary number of sources, even more than the number of sources seen during the training stage. The experimental results show that our ISSL achieves significant performance improvements in both DOA estimation and source number detection compared with the existing threshold-based algorithms.

eess.AS↗

arXiv2022

TMS: A Temporal Multi-scale Backbone Design for Speaker Embedding

Speaker embedding is an important front-end module to explore discriminative speaker features for many speech applications where speaker information is needed. Current SOTA backbone networks for speaker embedding are designed to aggregate multi-scale features from an utterance with multi-branch network architectures for speaker representation. However, naively adding many branches of multi-scale features with the simple fully convolutional operation could not efficiently improve the performance due to the rapid increase of model parameters and computational complexity. Therefore, in the most current state-of-the-art network architectures, only a few branches corresponding to a limited number of temporal scales could be designed for speaker embeddings. To address this problem, in this paper, we propose an effective temporal multi-scale (TMS) model where multi-scale branches could be efficiently designed in a speaker embedding network almost without increasing computational costs. The new model is based on the conventional TDNN, where the network architecture is smartly separated into two modeling operators: a channel-modeling operator and a temporal multi-branch modeling operator. Adding temporal multi-scale in the temporal multi-branch operator needs only a little bit increase of the number of parameters, and thus save more computational budget for adding more branches with large temporal scales. Moreover, in the inference stage, we further developed a systemic re-parameterization method to convert the TMS-based model into a single-path-based topology in order to increase inference speed. We investigated the performance of the new TMS method for automatic speaker verification (ASV) on in-domain and out-of-domain conditions. Results show that the TMS-based model obtained a significant increase in the performance over the SOTA ASV models, meanwhile, had a faster inference speed.

cs.SD↗

arXiv2022

L-SpEx: Localized Target Speaker Extraction

Speaker extraction aims to extract the target speaker's voice from a multi-talker speech mixture given an auxiliary reference utterance. Recent studies show that speaker extraction benefits from the location or direction of the target speaker. However, these studies assume that the target speaker's location is known in advance or detected by an extra visual cue, e.g., face image or video. In this paper, we propose an end-to-end localized target speaker extraction on pure speech cues, that is called L-SpEx. Specifically, we design a speaker localizer driven by the target speaker's embedding to extract the spatial features, including direction-of-arrival (DOA) of the target speaker and beamforming output. Then, the spatial cues and target speaker's embedding are both used to form a top-down auditory attention to the target speaker. Experiments on the multi-channel reverberant dataset called MC-Libri2Mix show that our L-SpEx approach significantly outperforms the baseline system.

eess.AS↗

arXiv2021

Using multiple reference audios and style embedding constraints for speech synthesis

The end-to-end speech synthesis model can directly take an utterance as reference audio, and generate speech from the text with prosody and speaker characteristics similar to the reference audio. However, an appropriate acoustic embedding must be manually selected during inference. Due to the fact that only the matched text and speech are used in the training process, using unmatched text and speech for inference would cause the model to synthesize speech with low content quality. In this study, we propose to mitigate these two problems by using multiple reference audios and style embedding constraints rather than using only the target audio. Multiple reference audios are automatically selected using the sentence similarity determined by Bidirectional Encoder Representations from Transformers (BERT). In addition, we use ''target'' style embedding from a Pre-trained encoder as a constraint by considering the mutual information between the predicted and ''target'' style embedding. The experimental results show that the proposed model can improve the speech naturalness and content quality with multiple reference audios and can also outperform the baseline model in ABX preference tests of style similarity.

cs.SD↗

arXiv2021

Exploring Deep Learning for Joint Audio-Visual Lip Biometrics

Audio-visual (AV) lip biometrics is a promising authentication technique that leverages the benefits of both the audio and visual modalities in speech communication. Previous works have demonstrated the usefulness of AV lip biometrics. However, the lack of a sizeable AV database hinders the exploration of deep-learning-based audio-visual lip biometrics. To address this problem, we compile a moderate-size database using existing public databases. Meanwhile, we establish the DeepLip AV lip biometrics system realized with a convolutional neural network (CNN) based video module, a time-delay neural network (TDNN) based audio module, and a multimodal fusion module. Our experiments show that DeepLip outperforms traditional speaker recognition models in context modeling and achieves over 50% relative improvements compared with our best single modality baseline, with an equal error rate of 0.75% and 1.11% on the test datasets, respectively.

cs.MM↗

arXiv2021

Multi-stage Speaker Extraction with Utterance and Frame-Level Reference Signals

Speaker extraction requires a sample speech from the target speaker as the reference. However, enrolling a speaker with a long speech is not practical. We propose a speaker extraction technique, that performs in multiple stages to take full advantage of short reference speech sample. The extracted speech in early stages is used as the reference speech for late stages. For the first time, we use frame-level sequential speech embedding as the reference for target speaker. This is a departure from the traditional utterance-based speaker embedding reference. In addition, a signal fusion scheme is proposed to combine the decoded signals in multiple scales with automatically learned weights. Experiments on WSJ0-2mix and its noisy versions (WHAM! and WHAMR!) show that SpEx++ consistently outperforms other state-of-the-art baselines.

eess.AS↗

arXiv2020

SpEx+: A Complete Time Domain Speaker Extraction Network

Speaker extraction aims to extract the target speech signal from a multi-talker environment given a target speaker's reference speech. We recently proposed a time-domain solution, SpEx, that avoids the phase estimation in frequency-domain approaches. Unfortunately, SpEx is not fully a time-domain solution since it performs time-domain speech encoding for speaker extraction, while taking frequency-domain speaker embedding as the reference. The size of the analysis window for time-domain and the size for frequency-domain input are also different. Such mismatch has an adverse effect on the system performance. To eliminate such mismatch, we propose a complete time-domain speaker extraction solution, that is called SpEx+. Specifically, we tie the weights of two identical speech encoder networks, one for the encoder-extractor-decoder pipeline, another as part of the speaker encoder. Experiments show that the SpEx+ achieves 0.8dB and 2.1dB SDR improvement over the state-of-the-art SpEx baseline, under different and same gender conditions on WSJ0-2mix-extr database respectively.

eess.AS↗