arXiv subjects

Jianzhong

Publications and source records attributed to Jianzhong.

At least 19 recordsLinked to original sources

arXiv2026

Extreme-MIMO Field Trials in 7 GHz Band: Unlocking the Potential of New Spectrum for 6G

The frequency range around 7 GHz has emerged as a promising upper mid-band spectrum for 6th generation (6G), offering a practical balance between coverage and capacity. To fully exploit this band, however, future systems require substantially stronger beamforming and spatial multiplexing capability than today's 5G 64-port commercial deployments. This article investigates extreme multiple-input multiple-output (X-MIMO) with 256 digital ports as a practical 6G architecture for 7 GHz operation. First, through system-level simulations, we examine the throughput benefits and design trade-offs of increasing the number of base station (BS) and user equipment (UE) digital antenna ports, including comparisons between 128-port and 256-port configurations. We then present a 256-port 7 GHz BS and UE prototype and report field-trial results obtained in urban outdoor environments. The measurements demonstrate the feasibility of 8-layer downlink single-user MIMO over a 100 MHz bandwidth, achieving more than 3 Gbps for a single user under urban outdoor propagation conditions. Channel analysis based on measured data further suggests how the large digital aperture of X-MIMO supports high-order spatial multiplexing even with limited dominant angular clusters. Finally, we identify key challenges and outline research directions toward practical deployment of 7 GHz X-MIMO systems for 6G.

eess.SP↗

arXiv2026

Enhancing Large Language Models (LLMs) for Telecom using Dynamic Knowledge Graphs and Explainable Retrieval-Augmented Generation

Large language models (LLMs) have shown strong potential across a variety of tasks, but their application in the telecom field remains challenging due to domain complexity, evolving standards, and specialized terminology. Therefore, general-domain LLMs may struggle to provide accurate and reliable outputs in this context, leading to increased hallucinations and reduced utility in telecom operations.To address these limitations, this work introduces KG-RAG-a novel framework that integrates knowledge graphs (KGs) with retrieval-augmented generation (RAG) to enhance LLMs for telecom-specific tasks. In particular, the KG provides a structured representation of domain knowledge derived from telecom standards and technical documents, while RAG enables dynamic retrieval of relevant facts to ground the model's outputs. Such a combination improves factual accuracy, reduces hallucination, and ensures compliance with telecom specifications.Experimental results across benchmark datasets demonstrate that KG-RAG outperforms both LLM-only and standard RAG baselines, e.g., KG-RAG achieves an average accuracy improvement of 14.3% over RAG and 21.6% over LLM-only models. These results highlight KG-RAG's effectiveness in producing accurate, reliable, and explainable outputs in complex telecom scenarios.

cs.AI↗

arXiv2025

MoE-CE: Enhancing Generalization for Deep Learning based Channel Estimation via a Mixture-of-Experts Framework

Reliable channel estimation (CE) is fundamental for robust communication in dynamic wireless environments, where models must generalize across varying conditions such as signal-to-noise ratios (SNRs), the number of resource blocks (RBs), and channel profiles. Traditional deep learning (DL)-based methods struggle to generalize effectively across such diverse settings, particularly under multitask and zero-shot scenarios. In this work, we propose MoE-CE, a flexible mixture-of-experts (MoE) framework designed to enhance the generalization capability of DL-based CE methods. MoE-CE provides an appropriate inductive bias by leveraging multiple expert subnetworks, each specialized in distinct channel characteristics, and a learned router that dynamically selects the most relevant experts per input. This architecture enhances model capacity and adaptability without a proportional rise in computational cost while being agnostic to the choice of the backbone model and the learning algorithm. Through extensive experiments on synthetic datasets generated under diverse SNRs, RB numbers, and channel profiles, including multitask and zero-shot evaluations, we demonstrate that MoE-CE consistently outperforms conventional DL approaches, achieving significant performance gains while maintaining efficiency.

eess.SP↗

arXiv2025

Hierarchical Debate-Based Large Language Model (LLM) for Complex Task Planning of 6G Network Management

6G networks have become increasingly complicated due to novel network architecture and newly emerging signal processing and transmission techniques, leading to significant burdens to 6G network management. Large language models (LLMs) have recently been considered a promising technique to equip 6G networks with AI-native intelligence. Different from most existing studies that only consider a single LLM, this work involves a multi-LLM debate-based scheme for 6G network management, where multiple LLMs can collaboratively improve the initial solution sequentially. Considering the complex nature of 6G domain, we propose a novel hierarchical debate scheme: LLMs will first debate the sub-task decomposition, and then debate each subtask step-by-step. Such a hierarchical approach can significantly reduce the overall debate difficulty by sub-task decomposition, aligning well with the complex nature of 6G networks and ensuring the final solution qualities. In addition, to better evaluate the proposed technique, we have defined a novel dataset named 6GPlan, including 110 complex 6G network management tasks and 5000 keyword solutions. Finally, the experiments show that the proposed hierarchical debate can significantly improve performance compared to baseline techniques, e.g. more than 30% coverage rate and global recall rate improvement.

eess.SY↗

arXiv2025

Prompting Wireless Networks: Reinforced In-Context Learning for Power Control

To manage and optimize constantly evolving wireless networks, existing machine learning (ML)- based studies operate as black-box models, leading to increased computational costs during training and a lack of transparency in decision-making, which limits their practical applicability in wireless networks. Motivated by recent advancements in large language model (LLM)-enabled wireless networks, this paper proposes ProWin, a novel framework that leverages reinforced in-context learning to design task-specific demonstration Prompts for Wireless Network optimization, relying on the inference capabilities of LLMs without the need for dedicated model training or finetuning. The task-specific prompts are designed to incorporate natural language descriptions of the task description and formulation, enhancing interpretability and eliminating the need for specialized expertise in network optimization. We further propose a reinforced in-context learning scheme that incorporates a set of advisable examples into task-specific prompts, wherein informative examples capturing historical environment states and decisions are adaptively selected to guide current decision-making. Evaluations on a case study of base station power control showcases that the proposed ProWin outperforms reinforcement learning (RL)-based methods, highlighting the potential for next-generation future wireless network optimization.

eess.SP↗

arXiv2025

Understanding 6G through Language Models: A Case Study on LLM-aided Structured Entity Extraction in Telecom Domain

Knowledge understanding is a foundational part of envisioned 6G networks to advance network intelligence and AI-native network architectures. In this paradigm, information extraction plays a pivotal role in transforming fragmented telecom knowledge into well-structured formats, empowering diverse AI models to better understand network terminologies. This work proposes a novel language model-based information extraction technique, aiming to extract structured entities from the telecom context. The proposed telecom structured entity extraction (TeleSEE) technique applies a token-efficient representation method to predict entity types and attribute keys, aiming to save the number of output tokens and improve prediction accuracy. Meanwhile, TeleSEE involves a hierarchical parallel decoding method, improving the standard encoder-decoder architecture by integrating additional prompting and decoding strategies into entity extraction tasks. In addition, to better evaluate the performance of the proposed technique in the telecom domain, we further designed a dataset named 6GTech, including 2390 sentences and 23747 words from more than 100 6G-related technical publications. Finally, the experiment shows that the proposed TeleSEE method achieves higher accuracy than other baseline techniques, and also presents 5 to 9 times higher sample processing speed.

cs.CL↗

arXiv2025

Enhancing Large Language Models (LLMs) for Telecommunications using Knowledge Graphs and Retrieval-Augmented Generation

Large language models (LLMs) have made significant progress in general-purpose natural language processing tasks. However, LLMs are still facing challenges when applied to domain-specific areas like telecommunications, which demands specialized expertise and adaptability to evolving standards. This paper presents a novel framework that combines knowledge graph (KG) and retrieval-augmented generation (RAG) techniques to enhance LLM performance in the telecom domain. The framework leverages a KG to capture structured, domain-specific information about network protocols, standards, and other telecom-related entities, comprehensively representing their relationships. By integrating KG with RAG, LLMs can dynamically access and utilize the most relevant and up-to-date knowledge during response generation. This hybrid approach bridges the gap between structured knowledge representation and the generative capabilities of LLMs, significantly enhancing accuracy, adaptability, and domain-specific comprehension. Our results demonstrate the effectiveness of the KG-RAG framework in addressing complex technical queries with precision. The proposed KG-RAG model attained an accuracy of 88% for question answering tasks on a frequently used telecom-specific dataset, compared to 82% for the RAG-only and 48% for the LLM-only approaches.

cs.CL↗

arXiv2025

Low Complexity Frequency Domain Nonlinear Self-Interference Cancellation for Flexible Duplex

Nonlinear self-interference (SI) cancellation is essential for mitigating the impact of transmitter-side nonlinearity on overall SI cancellation performance in flexible duplex systems, including in-band full-duplex (IBFD) and sub-band full-duplex (SBFD). Digital SI cancellation (SIC) must address the nonlinearity in the power amplifier (PA) and the in-phase/quadrature-phase (IQ) imbalance from up/down converters at the base station (BS), in addition to analog SIC. In environments with rich signal reflection paths, however, the required number of delayed taps for time-domain nonlinear SI cancellation increases exponentially with the number of multipaths, leading to excessive complexity. This paper introduces a novel, low-complexity, frequency domain nonlinear SIC, suitable for flexible duplex systems with multiple-input and multiple-output (MIMO) configurations. The key approach involves decomposing nonlinear SI into a nonlinear basis and categorizing them based on their effectiveness across any flexible duplex setting. The proposed algorithm is founded on our analytical results of intermodulation distortion (IMD) in the frequency domain and utilizes a specialized pilot sequence. This algorithm is directly applicable to orthogonal frequency division multiplexing (OFDM) multi-carrier systems and offers lower complexity than conventional digital SIC methods. Additionally, we assess the impact of the proposed SIC on flexible duplex systems through system-level simulation (SLS) using 3D ray-tracing and proof-of-concept (PoC) measurement.

eess.SP↗

arXiv2025

Beamforming with Joint Phase and Time Array: System Design, Prototyping and Performance

Joint phase-time arrays (JPTA) is a new mmWave radio frequency front-end architecture constructed with appending time-delay elements to phase shifters for analog beamforming. JPTA allows the mmWave base station (BS) to form multiple frequency-dependent beams with a single RF chain, exploiting the extra degrees of freedom the time-delay elements offer. Without requiring extra power-hungry RF chains, a BS with JPTA can schedule multiple users in different directions in a frequency-division multiplexing (FDM) manner. A BS with JPTA achieves various advantages over the traditional analog beamforming system. Simulation results show that JPTA can bring significant system-level benefits, e.g., extending uplink throughput coverage by 100%. To realize these system benefits of JPTA, high-resolution delay elements with a wide delay dynamic range are essential. With newly developed delay elements, we demonstrate that a single TRX RF chain can serve four users in four different directions in the mmWave band.

cs.IT↗

arXiv2024

WiDRa -- Enabling Millimeter-Level Differential Ranging Accuracy in Wi-Fi Using Carrier Phase

Although Wi-Fi is an ideal technology for many ranging applications, the performance of current methods is limited by the system bandwidth, leading to low accuracy of $\sim 1$ m. For many applications, measuring differential range, viz., the change in the range between adjacent measurements, is sufficient. Correspondingly, this work proposes WiDRa - a Wi-Fi based Differential Ranging solution that provides differential range estimates by using the sum-carrier-phase information. The proposed method is not limited by system bandwidth and can track range changes even smaller than the carrier wavelength. The proposed method is first theoretically justified, while taking into consideration the various hardware impairments affecting Wi-Fi chips. In the process, methods to isolate the sum-carrier phase from the hardware impairments are proposed. Extensive simulation results show that WiDRa can achieve a differential range estimation root-mean-square-error (RMSE) of $\approx 1$ mm in channels with a Rician-factor $\geq 7$ (a $100 \times$ improvement to existing methods). The proposed methods are also validated on off-the-shelf Wi-Fi hardware to demonstrate feasibility, where they achieve an RMSE of $< 1$ mm in the differential range. Finally, limitations of current investigation and future directions of exploration are suggested, to further tap into the potential of WiDRa.

cs.IT↗

arXiv2024

3D Beamforming Through Joint Phase-Time Arrays

High-frequency wideband cellular communications over mmWave and sub-THz offer the opportunity for high data rates. However, it also presents high path loss, resulting in limited coverage. High-gain beamforming from the antenna array is essential to mitigate the coverage limitations. The conventional phased antenna arrays (PAA) cause high scheduling latency owing to analog beam constraints, i.e., only one frequency-flat beam is generated. Recently introduced joint phase-time array (JPTA) architecture, which utilizes both true-time-delay (TTD) units and phase shifters (PSs), alleviates analog beam constraints by creating multiple frequency-dependent beams for scheduling multiple users at different directions in a frequency-division manner. One class of previous studies offered solutions with ``rainbow" beams, which tend to allocate a small bandwidth per beam direction. Another class focused on uniform linear array (ULA) antenna architecture, whose frequency-dependent beams were designed along a single axis of either azimuth or elevation direction. This paper presents a novel 3D beamforming design that maximizes beamforming gain toward desired azimuth and elevation directions and across sub-bands partitioned according to scheduled users' bandwidth requirements. We provide analytical solutions and iterative algorithms to design the PSs and TTD units for a desired subband beam pattern. Through simulations of the beamforming gain, we observe that our proposed solutions outperform the state-of-the-art solutions reported elsewhere.

cs.IT↗

arXiv2023

Joint Phase-Time Arrays: A Paradigm for Frequency-Dependent Analog Beamforming in 6G

Hybrid beamforming is an attractive solution to build cost-effective and energy-efficient transceivers for millimeter-wave and terahertz systems. However, conventional hybrid beamforming techniques rely on analog components that generate a frequency flat response such as phase-shifters and switches, which limits the flexibility of the achievable beam patterns. As a novel alternative, this paper proposes a new class of hybrid beamforming called Joint phase-time arrays (JPTA), that additionally use true-time delay elements in the analog beamforming to create frequency-dependent analog beams. Using as an example two important frequency-dependent beam behaviors, the numerous benefits of such flexibility are exemplified. Subsequently, the JPTA beamformer design problem to generate any desired beam behavior is formulated and near-optimal algorithms to the problem are proposed. Simulations show that the proposed algorithms can outperform heuristics solutions for JPTA beamformer update. Furthermore, it is shown that JPTA can achieve the two exemplified beam behaviors with one radio-frequency chain, while conventional hybrid beamforming requires the radio-frequency chains to scale with the number of antennas to achieve similar performance. Finally, a wide range of problems to further tap into the potential of JPTA are also listed as future directions.

cs.IT↗

arXiv2023

Optimal preprocessing of WiFi CSI for sensing applications

Due to its ubiquitous and contact-free nature, the use of WiFi infrastructure for performing sensing tasks has tremendous potential. However, the channel state information (CSI) measured by a WiFi receiver suffers from errors in both its gain and phase, which can significantly hinder sensing tasks. By analyzing these errors from different WiFi receivers, a mathematical model for these gain and phase errors is developed in this work. Based on these models, several theoretically justified preprocessing algorithms for correcting such errors at a receiver and, thus, obtaining clean CSI are presented. Simulation results show that at typical system parameters, the developed algorithms for cleaning CSI can reduce noise by $40$% and $200$%, respectively, compared to baseline methods for gain correction and phase correction, without significantly impacting computational cost. The superiority of the proposed methods is also validated in a real-world test bed for respiration rate monitoring (an example sensing task), where they improve the estimation signal-to-noise ratio by $20$% compared to baseline methods.

cs.IT↗

arXiv2020

RCNet: Incorporating Structural Information into Deep RNN for MIMO-OFDM Symbol Detection with Limited Training

In this paper, we investigate learning-based MIMO-OFDM symbol detection strategies focusing on a special recurrent neural network (RNN) -- reservoir computing (RC). We first introduce the Time-Frequency RC to take advantage of the structural information inherent in OFDM signals. Using the time domain RC and the time-frequency RC as the building blocks, we provide two extensions of the shallow RC to RCNet: 1) Stacking multiple time domain RCs; 2) Stacking multiple time-frequency RCs into a deep structure. The combination of RNN dynamics, the time-frequency structure of MIMO-OFDM signals, and the deep network enables RCNet to handle the interference and nonlinear distortion of MIMO-OFDM signals to outperform existing methods. Unlike most existing NN-based detection strategies, RCNet is also shown to provide a good generalization performance even with a limited training set (i.e, similar amount of reference signals/training as standard model-based approaches). Numerical experiments demonstrate that the introduced RCNet can offer a faster learning convergence and as much as 20% gain in bit error rate over a shallow RC structure by compensating for the nonlinear distortion of the MIMO-OFDM signal, such as due to power amplifier compression in the transmitter or due to finite quantization resolution in the receiver.

eess.SP↗

arXiv2019

Artificial Intelligence-Enabled Cellular Networks: A Critical Path to Beyond-5G and 6G

Mobile Network Operators (MNOs) are in process of overlaying their conventional macro cellular networks with shorter range cells such as outdoor pico cells. The resultant increase in network complexity creates substantial overhead in terms of operating expenses, time, and labor for their planning and management. Artificial intelligence (AI) offers the potential for MNOs to operate their networks in a more organic and cost-efficient manner. We argue that deploying AI in 5G and Beyond will require surmounting significant technical barriers in terms of robustness, performance, and complexity. We outline future research directions, identify top 5 challenges, and present a possible roadmap to realize the vision of AI-enabled cellular networks for Beyond-5G and 6G.

cs.IT↗

arXiv2019

Self-Tuning Sectorization: Deep Reinforcement Learning Meets Broadcast Beam Optimization

Beamforming in multiple input multiple output (MIMO) systems is one of the key technologies for modern wireless communication. Creating appropriate sector-specific broadcast beams are essential for enhancing the coverage of cellular network and for improving the broadcast operation for control signals. However, in order to maximize the coverage, patterns for broadcast beams need to be adapted based on the users' distribution and movement over time. In this work, we present self-tuning sectorization: a deep reinforcement learning framework to optimize MIMO broadcast beams autonomously and dynamically based on user' distribution in the network. Taking directly UE measurement results as input, deep reinforcement learning agent can track and predict the UE distribution pattern and come up with the best broadcast beams for each cell. Extensive simulation results show that the introduced framework can achieve the optimal coverage, and converge to the oracle solution for both single sector and multiple sectors environment, and for both periodic and Markov mobility patterns.

eess.SP↗

arXiv2019

Enable Super-resolution Parameter Estimation for Mm-wave Channel Sounding

This paper investigates the capability of millimeter-wave (mmWave) channel sounders with phased arrays to perform super-resolution parameter estimation, i.e., determine the parameters of multipath components (MPC), such as direction of arrival and delay, with resolution better than the Fourier resolution of the setup. We analyze the question both generally, and with respect to a particular novel multi-beam mmWave channel sounder that is capable of performing multiple-input-multiple-output (MIMO) measurements in dynamic environments. We firstly propose a novel two-step calibration procedure that provides higher-accuracy calibration data that are required for Rimax or SAGE. Secondly, we investigate the impact of center misalignment and residual phase noise on the performance of the parameter estimator. Finally we experimentally verify the calibration results and demonstrate the capability of our sounder to perform super-resolution parameter estimation.

cs.IT↗

arXiv2017

Distributed FD-MIMO: Cellular Evolution for 5G and Beyond

This paper presents the next evolution of FD-MIMO technology for beyond 5G, where antennas of the FD-MIMO system are placed in a distributed manner throughout the cell in a multi-cell deployment scenario. This system, referred to as Distributed FD-MIMO (D-FD-MIMO) system, is capable of providing higher cell average throughput as well as more uniform user experience compared to the conventional FD-MIMO system. System level simulations are performed to evaluate performance. Our results show that the proposed D-FD-MIMO system achieves 1.4-2 times cell average throughput gain compared to the FD-MIMO system. The insights of performance gain are provided. Hardware implementation challenges and potential standards impact are also presented.

cs.IT↗