arXiv subjects

Jiarong Kang

Publications and source records attributed to Jiarong Kang.

7 recordsLinked to original sources

arXiv2026

DASH Robot: Minimalistic Design and Optimal Aerial-Terrestrial Locomotion via Contact-Implicit Control

We present a novel and minimalistic design of an aerial-terrestrial robot DASH: Ducted Aerial Spring Hopper. The goal is to enable both aerial and ground locomotion capabilities on a unified mobile robot that is mechanically-minimalistic, locomotion-versatile, and energy-efficient. We propose an organic integration of ducted fan co-axial body with a springy leg at the bottom for realization. The ducted fan module provides thrust-vectoring as the main actuation for agile flying; when it is combined with the light-weight spring leg, the robot realizes highly efficient ground hopping with energy circulation. Moreover, to realize optimal locomotion with two modes, we employ a contact-implicit model predictive controller to automatically choose locomotion modes and actuation. We successfully validated the design and control of DASH through a range of tasks, including periodic hopping, aerial flight, and mode-free locomotion with autonomous mode transitions during obstacle traversal.

cs.RO↗

arXiv2026

PRIME: Physically-consistent Robotic Inertial and Motion Estimation for Legged and Humanoid Robots

Humanoid and legged robots interact with the environment through intermittent contacts, making accurate motion estimation fundamentally dependent on reasoning about contact dynamics. However, standard sensing pipelines-whether based on onboard proprioception with Extended Kalman Filters (EKFs) or external motion capture systems-recover only kinematics, while contact forces, contact timing, and inertial parameters remain unobserved. As a result, purely kinematic reconstructions often violate rigid-body dynamics, particularly during contact-rich motions. To enable accurate motion estimation from onboard kinematics in real-world deployment, we propose PRIME (Physically-consistent Robotic Inertial and Motion Estimation), a Maximum A Posteriori (MAP) formulation that refines measured kinematics and actuator commands into a dynamically consistent trajectory while jointly estimating frictional contact forces and physically consistent inertial parameters. Our approach incorporates differentiable contact dynamics with smoothed complementarity constraints and an Anitescu-style friction model, yielding a smooth optimization problem that remains tractable across versatile contact transitions. We evaluate PRIME on contact-rich locomotion with quadrupedal robots and the Unitree G1 humanoid, demonstrating improved trajectory consistency and accurate inertial parameter identification. Beyond improving state estimation and feedback control with calibrated inertial parameters, PRIME produces force- and contact-annotated motion reconstructions from real robots in deployment, which can be used to provide high-quality data for downstream learning applications, including large-scale behavior modeling and robot foundation models.

cs.RO↗

arXiv2025

Simultaneous Calibration of Noise Covariance and Kinematics for State Estimation of Legged Robots via Bi-level Optimization

Accurate state estimation is critical for legged and aerial robots operating in dynamic, uncertain environments. A key challenge lies in specifying process and measurement noise covariances, which are typically unknown or manually tuned. In this work, we introduce a bi-level optimization framework that jointly calibrates covariance matrices and kinematic parameters in an estimator-in-the-loop manner. The upper level treats noise covariances and model parameters as optimization variables, while the lower level executes a full-information estimator. Differentiating through the estimator allows direct optimization of trajectory-level objectives, resulting in accurate and consistent state estimates. We validate our approach on quadrupedal and humanoid robots, demonstrating significantly improved estimation accuracy and uncertainty calibration compared to hand-tuned baselines. Our method unifies state estimation, sensor, and kinematics calibration into a principled, data-driven framework applicable across diverse robotic platforms.

cs.RO↗

arXiv2025

Simultaneous Ground Reaction Force and State Estimation via Constrained Moving Horizon Estimation

Accurate ground reaction force (GRF) estimation can significantly improve the adaptability of legged robots in various real-world applications. For instance, with estimated GRF and contact kinematics, the locomotion control and planning assist the robot in overcoming uncertain terrains. The canonical momentum-based methods, formulated as nonlinear observers, do not fully address the noisy measurements and the dependence between floating-base states and the generalized momentum dynamics. In this paper, we present a simultaneous ground reaction force and state estimation framework for legged robots, which systematically addresses the sensor noise and the coupling between states and dynamics. With the floating base orientation estimated separately, a decentralized Moving Horizon Estimation (MHE) method is implemented to fuse the robot dynamics, proprioceptive sensors, exteroceptive sensors, and deterministic contact complementarity constraints in a convex windowed optimization. The proposed method is shown to be capable of providing accurate GRF and state estimation on several legged robots, including the custom-designed humanoid robot Bucky, the open-source educational planar bipedal robot STRIDE, and the quadrupedal robot Unitree Go1, with a frequency of 200Hz and a past time window of 0.04s.

cs.RO↗

arXiv2024

Fast Decentralized State Estimation for Legged Robot Locomotion via EKF and MHE

In this paper, we present a fast and decentralized state estimation framework for the control of legged locomotion. The nonlinear estimation of the floating base states is decentralized to an orientation estimation via Extended Kalman Filter (EKF) and a linear velocity estimation via Moving Horizon Estimation (MHE). The EKF fuses the inertia sensor with vision to estimate the floating base orientation. The MHE uses the estimated orientation with all the sensors within a time window in the past to estimate the linear velocities based on a time-varying linear dynamics formulation of the interested states with state constraints. More importantly, a marginalization method based on the optimization structure of the full information filter (FIF) is proposed to convert the equality-constrained FIF to an equivalent MHE. This decoupling of state estimation promotes the desired balance of computation efficiency, accuracy of estimation, and the inclusion of state constraints. The proposed method is shown to be capable of providing accurate state estimation to several legged robots, including the highly dynamic hopping robot PogoX, the bipedal robot Cassie, and the quadrupedal robot Unitree Go1, with a frequency at 200 Hz and a window interval of 0.1s.

cs.RO↗

arXiv2024

DiffEditor: Enhancing Speech Editing with Semantic Enrichment and Acoustic Consistency

As text-based speech editing becomes increasingly prevalent, the demand for unrestricted free-text editing continues to grow. However, existing speech editing techniques encounter significant challenges, particularly in maintaining intelligibility and acoustic consistency when dealing with out-of-domain (OOD) text. In this paper, we introduce, DiffEditor, a novel speech editing model designed to enhance performance in OOD text scenarios through semantic enrichment and acoustic consistency. To improve the intelligibility of the edited speech, we enrich the semantic information of phoneme embeddings by integrating word embeddings extracted from a pretrained language model. Furthermore, we emphasize that interframe smoothing properties are critical for modeling acoustic consistency, and thus we propose a first-order loss function to promote smoother transitions at editing boundaries and enhance the overall fluency of the edited speech. Experimental results demonstrate that our model achieves state-of-the-art performance in both in-domain and OOD text scenarios.

cs.SD↗

arXiv2023

Terrestrial Locomotion of PogoX: From Hardware Design to Energy Shaping and Step-to-step Dynamics Based Control

We present a novel controller design on a robotic locomotor that combines an aerial vehicle with a spring-loaded leg. The main motivation is to enable the terrestrial locomotion capability on aerial vehicles so that they can carry heavy loads: heavy enough that flying is no longer possible, e.g., when the thrust-to-weight ratio (TWR) is small. The robot is designed with a pogo-stick leg and a quadrotor, and thus it is named as PogoX. We show that with a simple and lightweight spring-loaded leg, the robot is capable of hopping with TWR $<1$. The control of hopping is realized via two components: a vertical height control via control Lyapunov function-based energy shaping, and a step-to-step (S2S) dynamics based horizontal velocity control that is inspired by the hopping of the Spring-Loaded Inverted Pendulum (SLIP). The controller is successfully realized on the physical robot, showing dynamic terrestrial locomotion of PogoX which can hop at variable heights and different horizontal velocities with robustness to ground height variations and external pushes.

cs.RO↗