Searcharxiv⌕ Search

arXiv subjects

Jiawei Liu

Publications and source records attributed to Jiawei Liu.

At least 163 records · Page 9Linked to original sources

A multicore parallel algorithm for multiscale modelling of an entire human blood circulation network

The presented multi-scale, closed-loop blood circulation model includes arterial, venous, and portal venous systems, heart-pulmonary circulation, and micro-circulation in capillaries. One-dimensional models simulate large blood vessel flow, whereas zerodimensional models are used for simulating blood flow in vascular subsystems corresponding to peripheral arteries and organs. Transmission conditions at bifurcation and confluence are solved using Riemann invariants. Blood circulation simulation in the portal venous system and related organs (liver, stomach, spleen, pancreas, intestine) is particularly targeted. Those organs play important roles in metabolic system dynamics. The proposed efficient parallel algorithms for multicore environments solve these equations much faster than serial computations.

physics.med-ph↗

Co-Designing Statistical MIMO Radar and In-band Full-Duplex Multi-User MIMO Communications -- Part I: Signal Processing

We consider a spectral sharing problem in which a statistical (or widely distributed) multiple-input multiple-output (MIMO) radar and an in-band full-duplex (IBFD) multi-user MIMO (MU-MIMO) communications system concurrently operate within the same frequency band. Prior works on joint MIMO-radar-MIMO-communications (MRMC) systems largely focus on either colocated MIMO radars, half-duplex MIMO communications, single-user scenarios, omit practical constraints (clutter, uplink [UL]/downlink [DL] transmit powers, UL/DL quality-of-service, and peak-to-average-power ratio), or MRMC co-existence that employs separate transmit/receive units. The purpose of this and companion papers (Part II and III) is to co-design an MRMC framework that addresses all of these issues. In this paper, we propose signal processing for a distributed IBFD MRMC, where radar receiver is designed to additionally exploit the downlink communications signals reflected from a radar target. Extensive numerical experiments show that our methods improve radar target detection over conventional codes and yield a higher achievable data rate than standard precoders. The following companion paper (Part II) describes the theory and procedure of our algorithm to solve the non-convex design problem. The final companion paper (Part II) considers the case of multiple targets and examines the tracking performance of our MRMC system.

eess.SP↗

Co-Designing Statistical MIMO Radar and In-band Full-Duplex Multi-User MIMO Communications -- Part II: Joint Precoder, Radar Code, and Receive Filters Design

We address the challenge of spectral sharing between a statistical multiple-input multiple-output (MIMO) radar and an in-band full-duplex (IBFD) multi-user MIMO (MU-MIMO) communications system operating simultaneously in the same frequency band. Existing research on joint MIMO-radar-MIMO-communications (MRMC) systems has limitations, such as focusing on colocated MIMO radars, half-duplex MIMO communications, single-user scenarios, neglecting practical constraints, or employing separate transmit/receive units for MRMC coexistence. This paper, along with companion papers (Part I and III), proposes a comprehensive MRMC framework that addresses all these challenges. In the previous companion paper (Part I), we presented signal processing techniques for a distributed IBFD MRMC system. In this paper, we introduce joint design of statistical MIMO radar codes, uplink/downlink precoders, and corresponding receive filters using a novel metric called compounded-and-weighted sum mutual information. To solve the resulting highly non-convex problem, we employ a combination of block coordinate descent (BCD) and alternating projection methods. Numerical experiments show convergence of our algorithm, mitigation of uplink interference, and stable data rates under varying noise levels, channel estimate imperfections, and self-interference. The subsequent companion paper (Part III) extends the discussion to multiple targets and evaluates the tracking performance of our MRMC system.

cs.IT↗

Co-Designing Statistical MIMO Radar and In-band Full-Duplex Multi-User MIMO Communications -- Part III: Multi-Target Tracking

As a next-generation wireless technology, the in-band full-duplex (IBFD) transmission enables simultaneous transmission and reception of signals over the same frequency, thereby doubling spectral efficiency. Further, a continuous up-scaling of wireless network carrier frequencies arising from ever-increasing data traffic is driving research on integrated sensing and communications (ISAC) systems. In this context, we study the co-design of common waveforms, precoders, and filters for an IBFD multi-user (MU) multiple-input multiple-output (MIMO) communications with a distributed MIMO radar. This paper, along with companion papers (Part I and II), proposes a comprehensive MRMC framework that addresses all these challenges. In the companion papers, we developed signal processing and joint design algorithms for this distributed system. In this paper, we tackle multi-target detection, localization, and tracking. This co-design problem that includes practical MU-MIMO constraints on power and quality-of-service is highly non-convex. We propose a low-complexity procedure based on Barzilai-Borwein gradient algorithm to obtain the design parameters and mixed-integer linear program for distributed target localization. Numerical experiments demonstrate the feasibility and accuracy of multi-target sensing of the distributed FD ISAC system. Finally, we localize and track multiple targets by adapting the joint probabilistic data association and extended Kalman filter for this system.

cs.IT↗

TagAlign: Improving Vision-Language Alignment with Multi-Tag Classification

The crux of learning vision-language models is to extract semantically aligned information from visual and linguistic data. Existing attempts usually face the problem of coarse alignment, e.g., the vision encoder struggles in localizing an attribute-specified object. In this work, we propose an embarrassingly simple approach to better align image and text features with no need of additional data formats other than image-text pairs. Concretely, given an image and its paired text, we manage to parse objects (e.g., cat) and attributes (e.g., black) from the description, which are highly likely to exist in the image. It is noteworthy that the parsing pipeline is fully automatic and thus enjoys good scalability. With these parsed semantics as supervision signals, we can complement the commonly used image-text contrastive loss with the multi-tag classification loss. Extensive experimental results on a broad suite of semantic segmentation datasets substantiate the average 5.2\% improvement of our framework over existing alternatives. Furthermore, the visualization results indicate that attribute supervision makes vision-language models accurately localize attribute-specified objects. Project page can be found at https://qinying-liu.github.io/Tag-Align.

cs.CV↗

Residual Denoising Diffusion Models

We propose residual denoising diffusion models (RDDM), a novel dual diffusion process that decouples the traditional single denoising diffusion process into residual diffusion and noise diffusion. This dual diffusion framework expands the denoising-based diffusion models, initially uninterpretable for image restoration, into a unified and interpretable model for both image generation and restoration by introducing residuals. Specifically, our residual diffusion represents directional diffusion from the target image to the degraded input image and explicitly guides the reverse generation process for image restoration, while noise diffusion represents random perturbations in the diffusion process. The residual prioritizes certainty, while the noise emphasizes diversity, enabling RDDM to effectively unify tasks with varying certainty or diversity requirements, such as image generation and restoration. We demonstrate that our sampling process is consistent with that of DDPM and DDIM through coefficient transformation, and propose a partially path-independent generation process to better understand the reverse process. Notably, our RDDM enables a generic UNet, trained with only an L1 loss and a batch size of 1, to compete with state-of-the-art image restoration methods. We provide code and pre-trained models to encourage further exploration, application, and development of our innovative framework (https://github.com/nachifur/RDDM).

cs.CV↗

Multi-perspective Memory Enhanced Network for Identifying Key Nodes in Social Networks

Identifying key nodes in social networks plays a crucial role in timely blocking false information. Existing key node identification methods usually consider node influence only from the propagation structure perspective and have insufficient generalization ability to unknown scenarios. In this paper, we propose a novel Multi-perspective Memory Enhanced Network (MMEN) for identifying key nodes in social networks, which mines key nodes from multiple perspectives and utilizes memory networks to store historical information. Specifically, MMEN first constructs two propagation networks from the perspectives of user attributes and propagation structure and updates node feature representations using graph attention networks. Meanwhile, the memory network is employed to store information of similar subgraphs, enhancing the model's generalization performance in unknown scenarios. Finally, MMEN applies adaptive weights to combine the node influence of the two propagation networks to select the ultimate key nodes. Extensive experiments demonstrate that our method significantly outperforms previous methods.

cs.SI↗

Hierarchical Information Enhancement Network for Cascade Prediction in Social Networks

Understanding information cascades in networks is a fundamental issue in numerous applications. Current researches often sample cascade information into several independent paths or subgraphs to learn a simple cascade representation. However, these approaches fail to exploit the hierarchical semantic associations between different modalities, limiting their predictive performance. In this work, we propose a novel Hierarchical Information Enhancement Network (HIENet) for cascade prediction. Our approach integrates fundamental cascade sequence, user social graphs, and sub-cascade graph into a unified framework. Specifically, HIENet utilizes DeepWalk to sample cascades information into a series of sequences. It then gathers path information between users to extract the social relationships of propagators. Additionally, we employ a time-stamped graph convolutional network to aggregate sub-cascade graph information effectively. Ultimately, we introduce a Multi-modal Cascade Transformer to powerfully fuse these clues, providing a comprehensive understanding of cascading process. Extensive experiments have demonstrated the effectiveness of the proposed method.

cs.SI↗

DEADiff: An Efficient Stylization Diffusion Model with Disentangled Representations

The diffusion-based text-to-image model harbors immense potential in transferring reference style. However, current encoder-based approaches significantly impair the text controllability of text-to-image models while transferring styles. In this paper, we introduce DEADiff to address this issue using the following two strategies: 1) a mechanism to decouple the style and semantics of reference images. The decoupled feature representations are first extracted by Q-Formers which are instructed by different text descriptions. Then they are injected into mutually exclusive subsets of cross-attention layers for better disentanglement. 2) A non-reconstructive learning method. The Q-Formers are trained using paired images rather than the identical target, in which the reference image and the ground-truth image are with the same style or semantics. We show that DEADiff attains the best visual stylization results and optimal balance between the text controllability inherent in the text-to-image model and style similarity to the reference image, as demonstrated both quantitatively and qualitatively. Our project page is https://tianhao-qi.github.io/DEADiff/.

cs.CV↗

StarCoder 2 and The Stack v2: The Next Generation

The BigCode project, an open-scientific collaboration focused on the responsible development of Large Language Models for Code (Code LLMs), introduces StarCoder2. In partnership with Software Heritage (SWH), we build The Stack v2 on top of the digital commons of their source code archive. Alongside the SWH repositories spanning 619 programming languages, we carefully select other high-quality data sources, such as GitHub pull requests, Kaggle notebooks, and code documentation. This results in a training set that is 4x larger than the first StarCoder dataset. We train StarCoder2 models with 3B, 7B, and 15B parameters on 3.3 to 4.3 trillion tokens and thoroughly evaluate them on a comprehensive set of Code LLM benchmarks. We find that our small model, StarCoder2-3B, outperforms other Code LLMs of similar size on most benchmarks, and also outperforms StarCoderBase-15B. Our large model, StarCoder2- 15B, significantly outperforms other models of comparable size. In addition, it matches or outperforms CodeLlama-34B, a model more than twice its size. Although DeepSeekCoder- 33B is the best-performing model at code completion for high-resource languages, we find that StarCoder2-15B outperforms it on math and code reasoning benchmarks, as well as several low-resource languages. We make the model weights available under an OpenRAIL license and ensure full transparency regarding the training data by releasing the SoftWare Heritage persistent IDentifiers (SWHIDs) of the source code data.

cs.SE↗

Endowing Pre-trained Graph Models with Provable Fairness

Pre-trained graph models (PGMs) aim to capture transferable inherent structural properties and apply them to different downstream tasks. Similar to pre-trained language models, PGMs also inherit biases from human society, resulting in discriminatory behavior in downstream applications. The debiasing process of existing fair methods is generally coupled with parameter optimization of GNNs. However, different downstream tasks may be associated with different sensitive attributes in reality, directly employing existing methods to improve the fairness of PGMs is inflexible and inefficient. Moreover, most of them lack a theoretical guarantee, i.e., provable lower bounds on the fairness of model predictions, which directly provides assurance in a practical scenario. To overcome these limitations, we propose a novel adapter-tuning framework that endows pre-trained graph models with provable fairness (called GraphPAR). GraphPAR freezes the parameters of PGMs and trains a parameter-efficient adapter to flexibly improve the fairness of PGMs in downstream tasks. Specifically, we design a sensitive semantic augmenter on node representations, to extend the node representations with different sensitive attribute semantics for each node. The extended representations will be used to further train an adapter, to prevent the propagation of sensitive attribute semantics from PGMs to task predictions. Furthermore, with GraphPAR, we quantify whether the fairness of each node is provable, i.e., predictions are always fair within a certain range of sensitive attribute semantics. Experimental evaluations on real-world datasets demonstrate that GraphPAR achieves state-of-the-art prediction performance and fairness on node classification task. Furthermore, based on our GraphPAR, around 90\% nodes have provable fairness.

cs.LG↗

Shape Manipulation of Bevel-Tip Needles for Prostate Biopsy Procedures: A Comparison of Two Resolved-Rate Controllers

Prostate cancer diagnosis continues to encounter challenges, often due to imprecise needle placement in standard biopsies. Several control strategies have been developed to compensate for needle tip prediction inaccuracies, however none were compared against each other, and it is unclear whether any of them can be safely and universally applied in clinical settings. This paper compares the performance of two resolved-rate controllers, derived from a mechanics-based and a data-driven approach, for bevel-tip needle control using needle shape manipulation through a template. We demonstrate for a simulated 12-core biopsy procedure under model parameter uncertainty that the mechanics-based controller can better reach desired targets when only the final goal configuration is presented even with uncertainty on model parameters estimation, and that providing a feasible needle path is crucial in ensuring safe surgical outcomes when either controller is used for needle shape manipulation.

cs.RO↗

MagicVideo-V2: Multi-Stage High-Aesthetic Video Generation

The growing demand for high-fidelity video generation from textual descriptions has catalyzed significant research in this field. In this work, we introduce MagicVideo-V2 that integrates the text-to-image model, video motion generator, reference image embedding module and frame interpolation module into an end-to-end video generation pipeline. Benefiting from these architecture designs, MagicVideo-V2 can generate an aesthetically pleasing, high-resolution video with remarkable fidelity and smoothness. It demonstrates superior performance over leading Text-to-Video systems such as Runway, Pika 1.0, Morph, Moon Valley and Stable Video Diffusion model via user evaluation at large scale.

cs.CV↗

Machine Translation Testing via Syntactic Tree Pruning

Machine translation systems have been widely adopted in our daily life, making life easier and more convenient. Unfortunately, erroneous translations may result in severe consequences, such as financial losses. This requires to improve the accuracy and the reliability of machine translation systems. However, it is challenging to test machine translation systems because of the complexity and intractability of the underlying neural models. To tackle these challenges, we propose a novel metamorphic testing approach by syntactic tree pruning (STP) to validate machine translation systems. Our key insight is that a pruned sentence should have similar crucial semantics compared with the original sentence. Specifically, STP (1) proposes a core semantics-preserving pruning strategy by basic sentence structure and dependency relations on the level of syntactic tree representation; (2) generates source sentence pairs based on the metamorphic relation; (3) reports suspicious issues whose translations break the consistency property by a bag-of-words model. We further evaluate STP on two state-of-the-art machine translation systems (i.e., Google Translate and Bing Microsoft Translator) with 1,200 source sentences as inputs. The results show that STP can accurately find 5,073 unique erroneous translations in Google Translate and 5,100 unique erroneous translations in Bing Microsoft Translator (400% more than state-of-the-art techniques), with 64.5% and 65.4% precision, respectively. The reported erroneous translations vary in types and more than 90% of them cannot be found by state-of-the-art techniques. There are 9,393 erroneous translations unique to STP, which is 711.9% more than state-of-the-art techniques. Moreover, STP is quite effective to detect translation errors for the original sentences with a recall reaching 74.0%, improving state-of-the-art techniques by 55.1% on average.

cs.CL↗

DreamTuner: Single Image is Enough for Subject-Driven Generation

Diffusion-based models have demonstrated impressive capabilities for text-to-image generation and are expected for personalized applications of subject-driven generation, which require the generation of customized concepts with one or a few reference images. However, existing methods based on fine-tuning fail to balance the trade-off between subject learning and the maintenance of the generation capabilities of pretrained models. Moreover, other methods that utilize additional image encoders tend to lose important details of the subject due to encoding compression. To address these challenges, we propose DreamTurner, a novel method that injects reference information from coarse to fine to achieve subject-driven image generation more effectively. DreamTurner introduces a subject-encoder for coarse subject identity preservation, where the compressed general subject features are introduced through an attention layer before visual-text cross-attention. We then modify the self-attention layers within pretrained text-to-image models to self-subject-attention layers to refine the details of the target subject. The generated image queries detailed features from both the reference image and itself in self-subject-attention. It is worth emphasizing that self-subject-attention is an effective, elegant, and training-free method for maintaining the detailed features of customized subjects and can serve as a plug-and-play solution during inference. Finally, with additional subject-driven fine-tuning, DreamTurner achieves remarkable performance in subject-driven image generation, which can be controlled by a text or other conditions such as pose. For further details, please visit the project page at https://dreamtuner-diffusion.github.io/.

cs.CV↗

Open-orbit induced low field extremely large magnetoresistance in graphene/h-BN superlattices

We report intriguing and hitherto overlooked low-field room temperature extremely large magnetoresistance (XMR) patterns in graphene/hexagonal boron nitride (h-BN) superlattices that emerge due to the existence of open orbits within each miniband. This finding is set against the backdrop of the experimental discovery of the Hofstadter butterfly in moir superlattices, which has sparked considerable interest in the fractal quantum Hall regime. To cope with the challenge of deciphering the low magnetic field dynamics of moir minibands, we utilize a novel semi-classical calculation method, grounded in zero-field Fermi contours, to predict the nontrivial behavior of the Landau-level spectrum. This is compared with fully quantum simulations, enabling an in-depth and contrasted analysis of transport measurements in high-quality graphene-hBN superlattices. Our results not only highlight the primary observation of the open-orbit induced XMR in this system but also shed new light on other intricate phenomena. These include the nuances of single miniband dynamics, evident through Lifshitz transitions, and the complex interplay of semiclassical and quantum effects between these minibands. Specifically, we document transport anomalies linked to trigonal warping, a semiclassical deviation from the expected linear characteristics of Landau levels, and magnetic breakdown phenomena indicative of quantum tunneling, all effects jointly contributing to the intricacies of a rich electronic landscape uncovered at low magnetic fields.

cond-mat.mes-hall↗

Bevel-Tip Needle Deflection Modeling, Simulation, and Validation in Multi-Layer Tissues

Percutaneous needle insertions are commonly performed for diagnostic and therapeutic purposes as an effective alternative to more invasive surgical procedures. However, the outcome of needle-based approaches relies heavily on the accuracy of needle placement, which remains a challenge even with robot assistance and medical imaging guidance due to needle deflection caused by contact with soft tissues. In this paper, we present a novel mechanics-based 2D bevel-tip needle model that can account for the effect of nonlinear strain-dependent behavior of biological soft tissues under compression. Real-time finite element simulation allows multiple control inputs along the length of the needle with full three-degree-of-freedom (DOF) planar needle motions. Cross-validation studies using custom-designed multi-layer tissue phantoms as well as heterogeneous chicken breast tissues result in less than 1mm in-plane errors for insertions reaching depths of up to 61 mm, demonstrating the validity and generalizability of the proposed method.

cs.RO↗

Pedestrian Accessible Infrastructure Inventory: Assessing Zero-Shot Segmentation on Multi-Mode Geospatial Data for All Pedestrian Types

In this paper, a Segment Anything Model (SAM)-based pedestrian infrastructure segmentation workflow is designed and optimized, which is capable of efficiently processing multi-sourced geospatial data including LiDAR data and satellite imagery data. We used an expanded definition of pedestrian infrastructure inventory which goes beyond the traditional transportation elements to include street furniture objects that are important for accessibility but are often omitted from the traditional definition. Our contributions lie in producing the necessary knowledge to answer the following two questions. First, which data representation can facilitate zero-shot segmentation of infrastructure objects with SAM? Second, how well does the SAM-based method perform on segmenting pedestrian infrastructure objects? Our findings indicate that street view images generated from mobile LiDAR point cloud data, when paired along with satellite imagery data, can work efficiently with SAM to create a scalable pedestrian infrastructure inventory approach with immediate benefits to GIS professionals, city managers, transportation owners, and walkers, especially those with travel-limiting disabilities, such as individuals who are blind, have low vision, or experience mobility disabilities.

eess.IV↗