arXiv subjects

Jiawei Qiu

Publications and source records attributed to Jiawei Qiu.

At least 19 recordsLinked to original sources

arXiv2026

From Sports to Safety: Benchmarking Proactive Risk Inference in MLLMs

Timely anticipation of physical hazards is essential for real-world safety, yet existing MLLM evaluations focus on harmful content or general risks, leaving proactive physical hazard prediction underexplored. Sports provide a well-suited testbed: accident causes span diverse injury dimensions and pre-accident spatiotemporal cues draw on reasoning capabilities shared with broader safety domains such as autonomous driving and fall detection. We introduce SPRINT (Sports Proactive Risk INference Testbed), a benchmark of 2,888 real-world sports videos (2,440 accident, 448 safe controls) spanning 14 sports and 3 environmental settings. Accident videos feature fine-grained annotations of early hazard cues, accident timing, and hierarchical causes; safe videos are manually verified as accident-free and serve to diagnose prompt-induced false alarms. Evaluating state-of-the-art MLLMs under diverse prompts and temporal windows reveals a sharp gap between hazard sensitivity and understanding: the best model exceeds 95% in signaling hazards yet falls below 50% in identifying their causes. Diagnostic experiments further show that explicit danger queries trigger severe false alarms even on hazard-free videos. These findings indicate that current MLLMs exhibit only superficial proactive safety, lacking stable, cause-grounded early warning, and underscore the need for reliable proactive safety in dynamic physical environments. Data and code will be open-sourced upon acceptance.

cs.CV↗

arXiv2026

Decision Feedback Differential Detection for Reconfigurable Intelligent Surfaces

This work considers a Differential Reflecting Modulation (DRM) scheme for Reconfigurable Intelligent Surfaces (RIS) not requiring channel state information (CSI). When operating over time-varying fading channels, such schemes with Conventional Differential Demodulation (CDD) receivers experience high error floors and performance degradation. To address these issues, we propose a Decision Feedback Differential Detection (DFDD) technique for DRM. We explore the application of DFDD for RIS DRM and conduct extensive Monte-Carlo simulations to analyze performance. Results demonstrate the viability of our DFDD technique across various RIS scenarios and highlight the importance of proper parameter selection to achieve good performance. The DFDD scheme is also compared with uncoded and Differential Space-Time Modulation (DSTM) coded DRM using CDD based receivers. We observe that at low SNR, the DFDD scheme performs almost as well as the DRM with CDD scheme, but worse than the DSTM coded DRM. As the SNR increases however, both CDD-detected systems encounter high error floors while the error rate of DFDD based scheme continues to improve until it reaches a relatively low error floor. It is shown that the chief merits of employing DFDD receivers in such RIS systems is the low error floors they provide over time varying fading channels, albeit at expense of a small increased complexity.

cs.IT↗

arXiv2026

FlexNPU: Transparent NPU Virtualization for Dynamic LLM Prefill-Decode Co-location

Modern AI serving increasingly relies on NPUs for conventional inference and large language model serving. However, current NPU deployments commonly expose physical devices directly to applications, which limits runtime control over scheduling and makes it difficult to adapt execution to phase-level workload behavior. This limitation is particularly evident in LLM serving, where the prefill phase is compute-intensive while the decode phase is often constrained by memory bandwidth and KV-cache accesses. Static prefill-decode (PD) disaggregation reduces phase interference, but can introduce resource imbalance and unnecessary data movement. We present FlexNPU, a transparent user-space virtualization layer for Ascend NPUs. FlexNPU interposes on AscendCL APIs and routes NPU operations through per-device daemons, decoupling unmodified from physical NPU devices without modifying model code, AI frameworks, or NPU drivers. This runtime boundary allows FlexNPU to virtualize NPU objects, control operator dispatch, and support phase-aware scheduling for LLM serving. In particular, FlexNPU enables dynamic PD co-location, which adapts scheduling between prefill and decode according to their complementary resource characteristics. We implement FlexNPU on Huawei Ascend NPUs and evaluate it with typical LLM workloads. Compared with direct NPU passthrough, FlexNPU introduces no measurable inference overhead and slightly improves throughput in some scenarios. On a 384-card Ascend 910C deployment of DeepSeek-R1, FlexNPU improves throughput over static PD disaggregation by 5.15% and 26.33%. On Qwen2.5-7B, compared with static PD co-location, FlexNPU maintains comparable throughput while reducing TTFT by over 92% across tested workloads with nearly unchanged TPOT. These results show that transparent NPU virtualization is a practical substrate for efficient and responsive LLM serving.

cs.DC↗

arXiv2026

Experimental observation of exact quantum critical states

Anderson localization physics features three fundamental types of eigenstates: extended, localized, and critical, with the third one exhibiting the exotic properties in-between the former two. Confirming the presence of critical states is challenging, as it typically necessitates either advancing the analysis to the thermodynamic limit or identifying a universal mechanism which can rigorously determine these states. Here we report the unambiguous experimental realization of critical states, governed by a rigorous mechanism for exact quantum critical states, and further observe a generalized mechanism that quasiperiodic zeros in hopping couplings protect the critical states. We implement a programmable quasiperiodic mosaic model with tunable couplings and on-site potentials through a multiple superconducting qubit quantum system. By measuring the time-evolving observables, we identify the coexisting delocalized dynamics and incommensurately distributed zeros in the couplings, which are the defining features of the critical states. We map the localized-to-critical phase transition and demonstrate that critical states persist until quasiperiodic zeros are removed by strong long-range couplings, highlighting a novel generalized mechanism discovered in this experiment and shown with rigorous theory. Finally, we resolve the energy-dependent transition between localized and critical states, revealing the presence of anomalous mobility edges.

quant-ph↗

arXiv2026

Distributed multi-parameter quantum metrology with a superconducting quantum network

Quantum metrology has emerged as a powerful tool for timekeeping, field sensing, and precision measurements in fundamental physics. With the advent of distributed quantum metrology, its capabilities have extended to probing spatially distributed parameters across networked quantum systems. However, scalable implementations of distributed quantum metrology with multi-parameter estimation remain limited, particularly due to the challenges of generating and distributing entanglement across a quantum network and dealing with incompatibilities in multi-parameter quantum metrology. Here we demonstrate distributed multi-parameter quantum metrology on a modular superconducting quantum network with low-loss microwave interconnects, a platform that uniquely combines fast gate operations, adaptive control, and deterministic non-local entanglement generation. Using a control-enhanced sequential protocol, we estimate all three components of a remote vector field, achieving up to 13.72 dB improvement in precision over the individual strategy. We further perform direct estimation of vector field gradients along two directions across spatially separated nodes, realizing a 3.44 dB gain over local entanglement strategies. These results establish superconducting quantum networks as a competitive and reconfigurable platform for scalable multi-parameter distributed quantum metrology.

quant-ph↗

arXiv2026

Quantum dynamics of microwave photons in synthetic frequency dimension

Synthetic frequency dimension offers a powerful approach to simulate lattice models and control photon dynamics. However, extending this concept into the quantum regime, particularly at the single-photon level, has remained challenging in photonic platforms. Here, we demonstrate quantum-state initialization and detection of single-photon evolutions within a synthetic frequency lattice by integrating a superconducting qubit with a 16-meter aluminum coaxial cable. A tunable superconducting quantum interference device (SQUID)-based modulator is employed to synthesize lattice couplings and artificial gauge fields. We observe single-photon quantum random walks and Bloch oscillations, as well as nonadiabatic, unidirectional frequency conversion under rapid temporal modulation of the lattice Hamiltonian, together with band-structure measurements. The lattice connectivity can be readily reconfigured to construct higher-dimensional lattices using multiple drive tones. Our results establish superconducting quantum circuits as a versatile platform for programmable Hamiltonians and extensible synthetic lattices with flexible single-photon control.

quant-ph↗

arXiv2025

Logical operations with a dynamical qubit in Floquet-Bacon-Shor code

Quantum error correction (QEC) protects quantum systems against inevitable noises and control inaccuracies, providing a pathway towards fault-tolerant (FT) quantum computation. Stabilizer codes, including surface code and color code, have long been the focus of research and have seen significant experimental progress in recent years. Recently proposed time-dynamical QEC, including Floquet codes and generalized time-dynamical code implementations, opens up new opportunities for FT quantum computation. By employing a periodic schedule of low-weight parity checks, Floquet codes can generate additional dynamical logical qubits, offering enhanced error correction capabilities and potentially higher code performance. Here, we experimentally implement the Floquet-Bacon-Shor code on a superconducting quantum processor. We encode a dynamical logical qubit within a $3\times 3$ lattice of data qubits, alongside a conventional static logical qubit. We demonstrate FT encoding and measurement of the two-qubit logical states, and stabilize these states using repeated error detection. We showcase universal single-qubit logical gates on the dynamical qubit. Furthermore, by implementing a logical CNOT gate, we entangle the dynamical and static logical qubits, generating an error-detected logical Bell state with a fidelity of 75.9\%. Our results highlight the potential of Floquet codes for resource-efficient FT quantum computation.

quant-ph↗

arXiv2025

Dephasing-assisted diffusive dynamics in superconducting quantum circuits

Random fluctuations caused by environmental noise can lead to decoherence in quantum systems. Exploring and controlling such dissipative processes is both fundamentally intriguing and essential for harnessing quantum systems to gain practical advantages and deeper insights. In this work, we first demonstrate the diffusive dynamics assisted by controlled dephasing noise in superconducting quantum circuits, contrasting with coherent evolution. We show that dephasing can give distinct dynamical behavior in a superconducting qubit array with quasiperiodic order. Furthermore, by preparing different excitation distributions in the qubit array, we observe that a more localized initial state relaxes to a uniformly distributed mixed state faster with dephasing noise, illustrating another counterintuitive phenomenon called Mpemba-effect-like quantum dynamics, i.e., a far-from-equilibrium state can relax toward the equilibrium faster. These results deepen our understanding of diffusive dynamics at the microscopic level, and demonstrate controlled dissipative processes as a valuable tool for investigating Markovian open quantum systems.

quant-ph↗

arXiv2025

High-performance multiplexed readout of superconducting qubits with a tunable broadband Purcell filter

Fast, high-fidelity, and low back-action readout plays a crucial role in the advancement of quantum error correction (QEC). Here, we demonstrate high-performance multiplexed readout of superconducting qubits using a tunable broadband Purcell filter, effectively resolving the fundamental trade-off between measurement speed and photon-noise-induced dephasing. By dynamically tuning the filter parameters, we suppress photon-noise-induced dephasing by a factor of 7 in idle status, while enabling rapid, high-fidelity readout in measurement status. We achieve 99.6\% single-shot readout fidelity with 100~ns readout pulse, limited primarily by relaxation errors during readout. Using a multilevel readout protocol, we further attain 99.9\% fidelity in 50~ns. Simultaneous readout of three qubits using 100~ns pulses achieves an average fidelity of 99.5\% with low crosstalk. Additionally, the readout exhibits high quantum-nondemolition (QND) performance: 99.4\% fidelity over repeated measurements and a low leakage rate below 0.1\%. Building on the tunable broadband filter, we further propose a scalable readout scheme for surface code QEC with enhanced multiplexing capability, offering a promising solution for fast and scalable QEC.

quant-ph↗

arXiv2025

Space-time Coded Differential Modulation for Reconfigurable Intelligent Surfaces

Reconfigurable Intelligent Surfaces (RIS) hold the promise of improving significantly coverage, as well as spectral and energy efficiency in wireless communication systems. Techniques based on RIS form a key technology for 6G systems. An important issue in RIS technology is Channel State Information (CSI), which is much more difficult to acquire in such systems. This work introduces a Differential Space-Time Modulation (DSTM) scheme integrated with Differential Reflecting Modulation (DRM) to bypass the requirement for CSI in such systems, while providing error rate gains. The DSTM scheme is based on unitary group codes. We first consider uncoded DRM for RIS to serve as a reference point. Next we provide an overview of DSTM and outline the procedures for its integration with DRM. Furthermore, we explore the extension of both the original DRM and the coded DRM-DSTM scheme to a larger number of RIS reflecting patterns $K$, and provide tables of codes for $K= 2, 3, 4$. Encoding and decoding complexities are studied as well. Extensives simulation results over quasi-static Rayleigh fading channels confirm the effectiveness of the DRM-DSTM coded system, illustrating its advantages over uncoded DRM with proper system parameters.

cs.IT↗

arXiv2025

Synthetic $π$-flux system in 2D superconducting qubit array with tunable coupling

Flat-band systems provide an ideal platform for exploring exotic quantum phenomena, where the strongly suppressed kinetic energy in these flat energy bands suggests the potential for exotic phases driven by geometric structure, disorder, and interactions. While intriguing phenomena and physical mechanisms have been unveiled in theoretical models, synthesizing such systems within scalable quantum platforms remains challenging. Here, we present the experimental realization of a $π$-flux rhombic system using a two-dimensional superconducting qubit array with tunable coupling. We experimentally observe characteristic dynamics, e.g., $π$-flux driven destructive interference, and demonstrate the protocol for eigenstate preparation in this rhombic array with coupler-assisted flux. Our results provide future possibilities for exploring the interplay of geometry, interactions, and quantum information encoding in such degenerate systems.

quant-ph↗

arXiv2025

State Similarity in Modular Superconducting Quantum Processors with Classical Communications

As quantum devices continue to scale, distributed quantum computing emerges as a promising strategy for executing large-scale tasks across modular quantum processors. A central challenge in this paradigm is verifying the correctness of computational outcomes when subcircuits are executed independently following circuit cutting. Here we propose a cross-platform fidelity estimation algorithm tailored for modular architectures. Our method achieves substantial reductions in sample complexity compared to previous approaches designed for single-processor systems. We experimentally implement the protocol on modular superconducting quantum processors with up to 6 qubits to verify the similarity of two 11-qubit GHZ states. Beyond verification, we show that our algorithm enables a federated quantum kernel method that preserves data privacy. As a proof of concept, we apply it to a 5-qubit quantum phase learning task using six 3-qubit modules, successfully extracting phase information with just eight training samples. These results establish a practical path for scalable verification and trustworthy quantum machine learning of modular quantum processors.

quant-ph↗

arXiv2025

A Low-Noise and High-Stability DC Source for Superconducting Quantum Circuits

With the rapid scaling of superconducting quantum processors, electronic control systems relying on commercial off-the-shelf instruments face critical bottlenecks in signal density, power consumption, and crosstalk mitigation. Here we present a custom dual-channel direct current (DC) source module (QPower) dedicated for large-scale superconducting quantum processors. The module delivers a voltage range of $\pm$7 V with 200 mA maximum current per channel, while achieving the following key performance benchmarks: noise spectral density of 20 nV/$\sqrt{\mathrm{Hz}}$ at 10 kHz, output ripple $<$500 $μ$V$_{\mathrm{pp}}$ within 20 MHz bandwidth, and long-term voltage drift $<$5 $μ$V$_{\mathrm{pp}}$ over 12 hours. Integrated into the control electronics of a 66-qubit quantum processor, QPower enables qubit coherence times of $T_1 = 87.6~μ\mathrm{s}$ and Ramsey $T_2 = 5.1~μ\mathrm{s}$, with qubit resonance frequency drift constrained to $\pm$40 kHz during 12-hour operation. This modular design is compact in size and efficient in energy consumption, providing a scalable DC source solution for intermediate-scale quantum processors with stringent noise and stability requirements, with potential extensions to other quantum hardware platforms and precision measurement.

quant-ph↗

arXiv2025

Logical multi-qubit entanglement with dual-rail superconducting qubits

Recent advances in quantum error correction (QEC) across hardware platforms have demonstrated operation near and beyond the fault-tolerance threshold, yet achieving exponential suppression of logical errors through code scaling remains a critical challenge. Erasure qubits, which enable hardware-level detection of dominant error types, offer a promising path toward resource-efficient QEC by exploiting error bias. Single erasure qubits with dual-rail encoding in superconducting cavities and transmons have demonstrated high coherence and low single-qubit gate errors with mid-circuit erasure detection, but the generation of multi-qubit entanglement--a fundamental requirement for quantum computation and error correction--has remained an outstanding milestone. Here, we demonstrate a superconducting processor integrating four dual-rail erasure qubits that achieves the logical multi-qubit entanglement with error-biased protection. Each dual-rail qubit, encoded in pairs of tunable transmons, preserves millisecond-scale coherence times and single-qubit gate errors at the level of $10^{-5}$. By engineering tunable couplings between logical qubits, we generate high-fidelity entangled states resilient to physical qubit noise, including logical Bell states (98.8% fidelity) and a three-logical-qubit Greenberger-Horne-Zeilinger (GHZ) state (93.5% fidelity). A universal gate set is realized through a calibrated logical controlled-NOT (CNOT) gate with 96.2% process fidelity, enabled by coupler-activated $XX$ interactions in the protected logical subspace. This work advances dual-rail architectures beyond single-qubit demonstrations, providing a blueprint for concatenated quantum error correction with erasure qubits.

quant-ph↗

arXiv2025

Reversible tuning of nanowire quantum dot to atomic transitions

Quantum dots embedded in semiconductor photonic nanowires (NW-QDs) can deterministically produce single-photons and entangled photon pairs at high repetition rates. These photons can be efficiently coupled from the photonic nanowire into free space or optical fibers thanks to the sharp tip of the nanowire, which provides impedance matching. However, precise control of the NW-QD emission frequency in a way that is reversible, does not degrade the properties of the emitted photons, and can be used independently for individual NW-QDs on the same chip has so far remained a challenge. Resolving this issue is crucial for applications when interfacing the photons with quantum systems that require MHz to sub-GHz precision, such as atomic ensembles acting as memories in a quantum network. Here, we demonstrate a reversible tuning method that can tune the emission frequency of a NW-QD by more than 300 GHz with sub-GHz precision. We achieve this through gas condensation that is then partially reversed with localized laser ablation. This process finely adjusts stress applied to the quantum dots, thereby tuning their emission frequency. We validate the precision and stability of this method by tuning the frequency of the emitted single-photons across an atomic resonance to probe its absorption and dispersion. We observed up to 80\% absorption of the single-photons from NW-QD in hot caesium vapour at the D1-line resonances and a 75-fold decrease in group velocity associated with the hyperfine transitions of the D1-line ground states. We observed no discernible effects in the second-order autocorrelation function, lifetime, or linewidth of the NW-QD emission for up to 300 GHz of tuning and we saw minimal effects on the fine structure splitting of the NW-QD when tuning up to 100 GHz.

quant-ph↗

arXiv2025

A thermal-noise-resilient microwave quantum network traversing 4 K

Quantum communication at microwave frequencies has been fundamentally constrained by the susceptibility of microwave photons to thermal noise, hindering their application in scalable quantum networks. Here we demonstrate a thermal-noise-resilient microwave quantum network that establishes coherent coupling between two superconducting qubits through a 4 K thermalized niobium-titanium transmission line. By overcoupling the communication channel to a cold load at 10 mK, we suppress the effective thermal occupancy of the channel to 0.06 photons through radiative cooling -- a two-order-of-magnitude reduction below ambient thermal noise. We then decouple the cold load and rapidly transfer microwave quantum states through the channel while it rethermalizes, achieving a 58.5% state transfer fidelity and a 52.3% Bell entanglement fidelity, both exceeding the classical communication threshold. Our architecture overcomes the temperature-compatibility barrier for microwave quantum systems, providing a scalable framework for distributed quantum computing and enabling hybrid quantum networks with higher-temperature semiconductor or photonic platforms.

quant-ph↗

arXiv2024

A C-Band Cryogenic GaAs MMIC Low-Noise Amplifier for Quantum Applications

Large-scale superconducting quantum computers require massive numbers of high-performance cryogenic low-noise amplifiers (cryo-LNA) for qubit readout. Here we present a C-Band monolithic microwave integrated circuit (MMIC) cryo-LNA for this purpose. This cryo-LNA is based on 150 nm GaAs pseudomorphic high electron mobility transistor (pHEMT) process and implemented with a three-stage cascaded architecture, where the first stage adopts careful impedance match to optimize the noise and return loss. The integration of negative feedback loops adopted in the second and third-stage enhances the overall stability. Moreover, the pHEMT-self bias and current multiplexing circuitry structure facilitate the reduction of power consumption and require only single bias line. Operating at an ambient temperature of 3.6 K and consuming 15 mW, the cryo-LNA demonstrates good performance in the C-band, reaching a 5 K equivalent noise temperature and an average gain of 40 dB. We further benchmark this cryo-LNA with superconducting qubits, achieving an average single-shot dispersive readout fidelity of 98.3% without assistance from a quantum-limited parametric amplifier. The development of GaAs cryo-LNA diversifies technical support necessary for large-scale quantum applications.

quant-ph↗

arXiv2024

Synthetic multi-dimensional Aharonov-Bohm cages in Fock state lattices

Fock-state lattices (FSLs), composed of photon number states with infinite Hilbert space, have emerged as a promising platform for simulating high-dimensional physics due to their potential to extend into arbitrarily high dimensions. Here, we demonstrate the construction of multi-dimensional FSLs using superconducting quantum circuits. By controlling artificial gauge fields within their internal structures, we investigate flux-induced extreme localization dynamics, such as Aharonov-Bohm caging, extending from 2D to 3D. We also explore the coherent interference of quantum superposition states, achieving extreme localization within specific subspaces assisted by quantum entanglement. Our findings pave the way for manipulating the behavior of a broad class of quantum states in higher-dimensional systems.

quant-ph↗