arXiv subjects

Jiaxuan Cai

Publications and source records attributed to Jiaxuan Cai.

6 recordsLinked to original sources

arXiv2026

Transport-defined photodetection through electrically selectable nonequilibrium carrier transport

Broadband optical fields can change in both intensity and spectral distribution, but a fixed-response detector maps this evolving information onto a single electrical signal. Here we demonstrate transport-defined photodetection, in which electrical bias selects how photoexcited carriers are redistributed, escape and are collected, creating complementary response functions within one shared active region. In a GaAs/AlGaAs semiconductor ratchet, light-driven ratchet transport defines the response at 0 V, whereas the spectral evolution at -2 V is consistent with field-assisted hot-carrier transport. The overlapping states span a measured spectral range of 0.4-94.5 μm at 5 K, provide state-dependent calculated detection floors and support joint infrared operation at 30 K. Direct optical beat notes at 7.432 GHz in the mid-infrared and 17.103 GHz in the terahertz demonstrate optical-to-electrical conversion. Their common-path outputs recover an imposed spatial temperature gradient and the transient field-of-view-integrated effective radiation temperature of laser-excited graphite. These results establish post-photoexcitation transport as a function-defining design variable for semiconductor photodetectors, complementing structure-defined, field-tuned and optically encoded approaches to reconfigurable photodetection.

physics.optics↗

arXiv2026

HQC Post-Quantum Cryptography Decryption with Generalized Minimum-Distance Reed-Solomon Decoder

Hamming Quasi-Cyclic (HQC) was chosen for the latest post-quantum cryptography standardization. A concatenated Reed-Muller (RM) and Reed-Solomon (RS) code is decoded during the HQC decryption. Soft-decision RS decoders achieve better error-correcting performance than hard-decision decoders and accordingly shorten the required codeword and key lengths. However, the only soft-decision decoder for HQC in prior works is an erasure-only decoder, which has limited coding gain. This paper analyzes other hardware-friendly soft-decision RS decoders and discovers that the generalized minimum-distance (GMD) decoder can better utilize the soft information available in HQC. Extending the Agrawal-Vardy bound for the scenario of HQC, it was found that the RS codeword length for HQC-128 can be reduced from 46 to 36. This paper also proposes efficient GMD decoder hardware architectures optimized for the short and low-rate RS codes used in HQC. The HQC-128 decryption utilizing the proposed GMD decoder achieves 20% and 15% reductions on the latency and area, respectively, compared to the decryption with hard-decision decoders.

cs.CR↗

arXiv2024

Efficient Layered New Bit-Flipping QC-MDPC Decoder for BIKE Post-Quantum Cryptography

The medium-density parity-check (MDPC) code-based Bit Flipping Key Encapsulation (BIKE) mechanism remains a candidate of post-quantum cryptography standardization. The latest version utilizes a new bit-flipping (BF) decoding algorithm, which decides the BF threshold by an affine function with high-precision coefficients. Previous BF decoder implementations can be extended to the new algorithm. However, they suffer from large memories that dominate the overall complexity. This paper proposes a column-layered decoder for the new BIKE BF decoding algorithm to substantially reduce the memory requirement, and optimizes the affine BF threshold function coefficients to reduce the code length needed for the same security level. For the first time, our work also investigates the impact of finite precision representation of the threshold coefficients on the decoding performance. For an example MDPC code considered for the standard, the proposed layered BF decoder achieves 20% complexity reduction compared to the best prior effort with a very small latency overhead.

cs.CR↗

arXiv2024

Highly Efficient Parallel Row-Layered Min-Sum MDPC Decoder for McEliece Cryptosystem

The medium-density parity-check (MDPC) code-based McEliece cryptosystem remains a finalist of the post-quantum cryptography standard. The Min-sum decoding algorithm achieves better performance-complexity tradeoff than other algorithms for MDPC codes. However, the prior Min-sum MDPC decoder requires large memories, whose complexity dominates the overall complexity. Besides, its actual achievable parallelism is limited. This paper has four contributions: For the first time, the row-layered scheduling scheme is exploited to substantially reduce the memory requirement of MDPC decoders; A low-complexity scheme is developed to mitigate the performance loss caused by finite precision representation of the messages and high column weights of MDPC codes in row-layered decoding; Constraints are added to the parity check matrix construction to enable effective parallel processing with negligible impacts on the decoder performance and resilience towards attacks; A novel parity check matrix division scheme for highly efficient parallel processing is proposed and the corresponding parallel row-layered decoder architecture is designed. The number of clock cycles for each decoding iteration is reduced by a factor of L using the proposed L-parallel decoder with very small memory overhead. For an example 2-parallel decoder, the proposed design leads to 26% less memory requirement and 70% latency reduction compared to the prior decoder.

cs.CR↗

arXiv2024

Low-Complexity Integer Divider Architecture for Homomorphic Encryption

Homomorphic encryption (HE) allows computations to be directly carried out on ciphertexts and enables privacy-preserving cloud computing. The computations on the coefficients of the polynomials involved in HE are always followed by modular reduction, and the overall complexity of ciphertext multiplication can be reduced by utilizing the quotient. Our previous design considers the cases that the dividend is an integer multiple of the modulus and the modulus is in the format of $2^w-2^u\pm1$, where $u<w/2$. In this paper, the division is generalized for larger $u$ and dividend not an integer multiple of the modulus. An algorithm is proposed to compute the quotient and vigorous mathematical proofs are provided. Moreover, efficient hardware architecture is developed for implementing the proposed algorithm. Compared to alternative division approaches that utilize the inverse of the divisor, for $w=32$, the proposed design achieves at least 9% shorter latency and 79\% area reduction for 75% possible values of $u$.

cs.CR↗

arXiv2022

RepBNN: towards a precise Binary Neural Network with Enhanced Feature Map via Repeating

Binary neural network (BNN) is an extreme quantization version of convolutional neural networks (CNNs) with all features and weights mapped to just 1-bit. Although BNN saves a lot of memory and computation demand to make CNN applicable on edge or mobile devices, BNN suffers the drop of network performance due to the reduced representation capability after binarization. In this paper, we propose a new replaceable and easy-to-use convolution module RepConv, which enhances feature maps through replicating input or output along channel dimension by $β$ times without extra cost on the number of parameters and convolutional computation. We also define a set of RepTran rules to use RepConv throughout BNN modules like binary convolution, fully connected layer and batch normalization. Experiments demonstrate that after the RepTran transformation, a set of highly cited BNNs have achieved universally better performance than the original BNN versions. For example, the Top-1 accuracy of Rep-ReCU-ResNet-20, i.e., a RepBconv enhanced ReCU-ResNet-20, reaches 88.97% on CIFAR-10, which is 1.47% higher than that of the original network. And Rep-AdamBNN-ReActNet-A achieves 71.342% Top-1 accuracy on ImageNet, a fresh state-of-the-art result of BNNs. Code and models are available at:https://github.com/imfinethanks/Rep_AdamBNN.

cs.CV↗