arXiv subjects

Jiayue Wang

Publications and source records attributed to Jiayue Wang.

10 recordsLinked to original sources

arXiv2026

Defect-engineered scaling of lead-free ferroelectrics with ultralow-voltage switching

Scaling ferroelectrics to nanometer thicknesses remains a central challenge for low-power, nonvolatile electronics, as leakage currents increasingly dominate with reduced dimensions. Alkali-based, lead-free ferroelectrics offer an environmentally sustainable alternative to lead-based systems, yet their scaling is severely limited by leakage arising from volatile alkali constituents. Here, we show that this intrinsic limitation can be transformed into an advantageous degree of freedom through defect engineering. By precisely modulating alkali deficiency during thin-film synthesis, we engineer clustered defect complexes that function as deep trap states, strongly suppressing leakage and enabling robust ferroelectric operation in ultrathin films down to the sub-10 nm regime at voltages below 100 mV. Our results establish defect-enabled scaling as a viable pathway for advancing environmentally benign ferroelectrics toward ultra-low-power, non-volatile electronic technologies.

cond-mat.mtrl-sci↗

arXiv2026

Utility-Aware Progressive Inference over UDP Packet Blocks for Emergency Communications

Emergency communications increasingly rely on remote visual inference for timely hazard detection under stringent bandwidth and latency constraints. However, conventional UDP-based visual delivery typically performs inference only after the full payload has been received, even though partially received packet blocks may already contain sufficient task-relevant evidence for reliable decision making. This paper proposes a utility-aware progressive inference framework for emergency communications, which operates directly on UDP packet blocks and determines when sufficient task value has been accumulated for early hazard recognition. Specifically, the sender estimates packet-level decision utility as lightweight control metadata, while the receiver progressively updates partial observations, accumulates the utility of received packets, and triggers an early stop once the normalized utility exceeds a prescribed threshold. Experiments on a fire-scene detection dataset show that, at the main operating point, the proposed method reduces the average packet budget by 34.2% and the decision delay by 1209.17 ms while retaining 91.5% of the full-reception match rate. The method also maintains its advantage over the stability-based baseline under moderate packet loss and different packet-arrival orders. These results demonstrate that packet-level utility provides an effective basis for communication-efficient and delay-aware hazard recognition over UDP-based emergency links.

eess.SP↗

arXiv2025

Reducing the strain required for ambient-pressure superconductivity in bilayer nickelates

The remarkable discovery of high temperature superconductivity in bulk bilayer nickelates under high pressure has prompted the conjecture that epitaxial compressive strain might mimic essential aspects of hydrostatic pressure. The successful realization of superconductivity in films on SrLaAlO4 (001) (SLAO) supports this correspondence, yet it remains unclear whether the rich pressure-temperature phase diagram of bilayer nickelates can be systematically mapped (and studied at ambient pressure) as a function of epitaxial strain. To this end, experimental access near the elusive edge of the superconducting phase boundary would provide invaluable insight into the nature of the superconducting state and the ground state from which it emerges. It would also offer a benchmark for theoretical models. Here we report superconducting bilayer nickelates grown on LaAlO3 (001) (LAO), where the compressive strain required for ambient-pressure superconductivity is nearly halved to -1.2%. These films exhibit a superconducting onset above 10 K and reach zero resistance at 3 K, with normal-state transport properties differing from those of films grown on SLAO. Our results offer a new opportunity to probe emergent phenomena near the superconducting phase boundary in the strain-temperature phase diagram of bilayer nickelates.

cond-mat.supr-con↗

arXiv2025

Early Detection of Treatments Side Effect: A Sequential Approach

With the emergence and spread of infectious diseases with pandemic potential, such as COVID- 19, the urgency for vaccine development have led to unprecedented compressed and accelerated schedules that shortened the standard development timeline. In a relatively short time, the leading pharmaceutical companies1, received an Emergency Use Authorization (EUA) for vaccine\prime s en-mass deployment To monitor the potential side effect(s) of the vaccine during the (initial) vaccination campaign, we developed an optimal sequential test that allows for the early detection of potential side effect(s). This test employs a rule to stop the vaccination process once the observed number of side effect incidents exceeds a certain (pre-determined) threshold. The optimality of the proposed sequential test is justified when compared with the (α, β) optimality of the non-randomized fixed-sample Uniformly Most Powerful (UMP) test. In the case of a single side effect, we study the properties of the sequential test and derive the exact expressions of the Average Sample Number (ASN) curve of the stopping time (and its variance) via the regularized incomplete beta function. Additionally, we derive the asymptotic distribution of the relative savings in ASN as compared to maximal sample size. Moreover, we construct the post-test parameter estimate and studied its sampling properties, including its asymptotic behavior under local-type alternatives. These limiting behavior results are the consistency and asymptotic normality of the post-test parameter estimator. We conclude the paper with a small simulation study illustrating the asymptotic performance of the point and interval estimation and provide a detailed example, based on COVID-19 side effect data (see Beatty et al. (2021)) of our suggested testing procedure.

stat.AP↗

arXiv2025

Optimal Sequential Procedure for Early Detection of Multiple Side Effects

In this paper, we propose an optimal sequential procedure for the early detection of potential side effects resulting from the administration of some treatment (e.g. a vaccine, say). The results presented here extend previous results obtained in Wang and Boukai (2024) who study the single side effect case to the case of two (or more) side effects. While the sequential procedure we employ, simultaneously monitors several of the treatment's side effects, the $(α, β)$-optimal test we propose does not require any information about the inter-correlation between these potential side effects. However, in all of the subsequent analyses, including the derivations of the exact expressions of the Average Sample Number (ASN), the Power function, and the properties of the post-test (or post-detection) estimators, we accounted specifically, for the correlation between the potential side effects. In the real-life application (such as post-marketing surveillance), the number of available observations is large enough to justify asymptotic analyses of the sequential procedure (testing and post-detection estimation) properties. Accordingly, we also derive the consistency and asymptotic normality of our post-test estimators; results which enable us to also provide (asymptotic, post-detection) confidence intervals for the probabilities of various side-effects. Moreover, to compare two specific side effects, their relative risk plays an important role. We derive the distribution of the estimated relative risk in the asymptotic framework to provide appropriate inference. To illustrate the theoretical results presented, we provide two detailed examples based on the data of side effects on COVID-19 vaccine collected in Nigeria (see Nigeria (see Ilori et al. (2022)).

stat.ME↗

arXiv2025

Bayesian sequential analysis of adverse events with binary data

We propose a Bayesian Sequential procedure to test hypotheses concerning the Relative Risk between two specific treatments based on the binary data obtained from the two-arm clinical trial. Our development is based on the optimal sequential test of \citet{wang2024early}, which is cast within the Bayesian framework. This approach enables us to provide, in a straightforward manner based on the Stopping Rule Principle (SRP), an assessment of the various error probabilities via posterior probabilities and conditional error probabilities. Additionally, we present the connection to the notion of the Uniformly Most Powerful Bayesian Test (UMPBT). To illustrate our procedure, we utilized the data from \citet{silva2020optimal} to analyze the results obtained from the standard Bayesian and the modified Bayesian test of \citet{berger1997unified} under several different prior distributions of the parameters involved.

stat.ME↗

arXiv2025

Spin glass behavior in amorphous CrSiTe3 alloy

Owing to the intrinsically high crystallization temperatures, layered phase-change materials, such as CrGeTe3 and InGeTe3, are attracting attention for embedded memory applications, In addition to the electrical contrast, a major change in magnetic properties is observed in CrGeTe3 upon switching from the crystalline to the amorphous state. In this work, we report a combined ab initio modeling and magnetic characterization study on the isostructural silicon parent compound of CrGeTe3, namely, CrSiTe3. Amorphous CrSiTe3 has similar structural properties to amorphous CrGeTe3; however, it shows a smaller energy difference between the ferromagnetic configuration and the random magnetic configuration, indicating a high probability of spin glass formation. Indeed, direct-current and alternating-current magnetic measurements show that the coercive force of amorphous CrSiTe3 is higher than that of amorphous CrGeTe3. Therefore, the pinning effect of spins is enhanced in amorphous CrSiTe3, leading to a more robust spin glass state with a higher freezing temperature. The large magnetic contrast between the amorphous and crystalline phase could make CrSiTe3 a potential candidate for phase-change magnetic switching applications.

cond-mat.mtrl-sci↗

arXiv2025

Suggesting Code Edits in Interactive Machine Learning Notebooks Using Large Language Models

Machine learning developers frequently use interactive computational notebooks, such as Jupyter notebooks, to host code for data processing and model training. Jupyter notebooks provide a convenient tool for writing machine learning pipelines and interactively observing outputs, however, maintaining Jupyter notebooks, e.g., to add new features or fix bugs, can be challenging due to the length and complexity of the notebooks. Moreover, there is no existing benchmark related to developer edits on Jupyter notebooks. To address this, we present the first dataset of 48,398 Jupyter notebook edits derived from 20,095 revisions of 792 machine learning repositories on GitHub, and perform the first study of the using LLMs to predict code edits in Jupyter notebooks. Our dataset captures granular details of cell-level and line-level modifications, offering a foundation for understanding real-world maintenance patterns in machine learning workflows. We observed that the edits on Jupyter notebooks are highly localized, with changes averaging only 166 lines of code in repositories. While larger models outperform smaller counterparts in code editing, all models have low accuracy on our dataset even after finetuning, demonstrating the complexity of real-world machine learning maintenance tasks. Our findings emphasize the critical role of contextual information in improving model performance and point toward promising avenues for advancing large language models' capabilities in engineering machine learning code.

cs.SE↗

arXiv2020

Bayesian Modeling of COVID-19 Positivity Rate -- the Indiana experience

In this short technical report we model, within the Bayesian framework, the rate of positive tests reported by the the State of Indiana, accounting also for the substantial variability (and overdispeartion) in the daily count of the tests performed. The approach we take, results with a simple procedure for prediction, a posteriori, of this rate of 'positivity' and allows for an easy and a straightforward adaptation by any agency tracking daily results of COVID-19 tests. The numerical results provided herein were obtained via an updatable R Markdown document.

stat.ME↗

arXiv2014

Tunable THz Surface Plasmon Polariton based on Topological Insulator-Layered Superconductor Hybrid Structure

We theoretically investigate the surface plasmon polariton (SPP) at the interface between 3D strong topological insulator (TI) and layered superconductor-magnetic insulator structure. The tunability of SPP through electronic doping can be enhanced when the magnetic permeability of the layered structure becomes higher. When the interface is gapped by superconductivity or perpendicular magnetism, SPP dispersion is further distorted, accompanied by a shift of group velocity and penetration depth. Such a shift of SPP reaches maximum when the magnitude of Fermi level approaches the gap value, and may lead to observable effects. The tunable SPP at the interface between layered superconductor and magnetism materials in proximity to TI surface may provide new insight in the detection of Majorana Fermions.

cond-mat.mes-hall↗