arXiv subjects

Jiaze Wang

Publications and source records attributed to Jiaze Wang.

At least 19 recordsLinked to original sources

arXiv2026

The FU Ori outburst of PR Ori B

We report the discovery of a nearby FU Ori-type outburst (FUor), PR Ori B, in the L1641 cluster of the Orion star-forming region. The high-amplitude variability was first identified in the NEOWISE (3-5 $μ$m) photometry of the unresolved PR Ori binary system. Long-term, resolved optical photometric monitoring demonstrates that PR Ori B is the driver of a $ΔG=5~$mag outburst, while PR Ori A has remained constant over the last 20 years. The near-IR spectrum of PR Ori B changes from a late K-type spectral type during quiescence to a viscously heated disk during outburst, including deep absorption in $^{12}$CO and H$_2$O bands. The optical spectrum also exhibits features that are commonly associated with FUors, including P Cygni profiles in Na I D lines and absorption in the Ca II infrared triplet. The luminosity of the outburst (L$_{acc}\sim$30--40 L$_\odot$) is similar to that commonly observed in FUors. The comparison of Spitzer/IRS and VLT/VISIR spectroscopy shows some evidence of silicate crystallisation during the outburst. PR Ori B is one of the closest and brightest FUors discovered over the last few years, only one magnitude fainter than the archetype of the class FU Ori. The proximity and brightness will allow for future high angular resolution observations to probe the physics of the inner disk and to evaluate changes in the disk due to the increased luminosity.

astro-ph.SR↗

arXiv2026

Aortic Valve Disease Screening from PPG via Physiology-Guided Self-Supervised Learning

Aortic valve disease (AVD) represents a major public health burden, while its diagnosis relies on echocardiography, which is limited by cost and specialist expertise, restricting scalable screening and risk stratification. Existing portable sensing modalities are constrained by indirect representations or acquisition dependencies. In this context, photoplethysmography (PPG), a widely available optical signal capturing peripheral hemodynamic dynamics, provides a scalable physiological measurement. However, the scarcity of clinically labeled PPG data severely constrains the development of effective data-driven models. To address this limitation, we propose Physiology-Guided Self-Supervised Learning (PG-SSL), leveraging approximately 170,000 unlabeled UK Biobank PPG recordings. PG-SSL constructs physiologically derived pseudo-labels based on clinically motivated waveform phenotypes associated with aortic stenosis (AS) and aortic regurgitation (AR), enabling large-scale pretraining without AVD-specific labels. Following fine-tuning on a small labeled cohort, the model achieved AUROCs of 0.8025 for AS and 0.7669 for AR. Further analyses demonstrated robustness under clinical confounding and covariate-balanced evaluation, as well as significant longitudinal associations with incident AVD events. This study demonstrates the feasibility of PG-SSL for leveraging large-scale unlabeled physiological signals under clinically labeled data-scarce conditions. The proposed approach provides a useful strategy for improving low-cost PPG-based screening and risk enrichment for clinically recognized AVD.

eess.SP↗

arXiv2026

SAM-Flow: Source-Anchored Masked Flow for Training-Free Image Editing

Training-free image editing has recently attracted increasing attention due to its ability to modify real images using powerful pre-trained diffusion and flow-matching models without additional training. However, existing inversion-based and differential-flow-based methods usually perform global latent transport, which inevitably propagates editing effects to non-target regions and leads to background leakage. To address this problem, we propose SAM-Flow, a source-anchored masked flow framework for localized training-free image editing. Instead of updating the whole latent representation, SAM-Flow first uses a scout image and token-grounded attention maps to localize the editable semantic regions. It then applies differential velocity updates only within these regions, while anchoring the remaining areas to the source-image latent trajectory. To further improve spatial stability and boundary naturalness, we introduce a time-varying source-anchored projection mechanism with dynamic soft masks, transition regions, and temporal mask accumulation. The proposed method is plug-and-play and can be integrated with mainstream flow-matching backbones such as Stable Diffusion 3 and FLUX without any fine-tuning. Extensive qualitative and quantitative experiments demonstrate that SAM-Flow achieves accurate semantic editing while significantly improving background preservation, providing a simple and general localized editing paradigm for training-free image editing. Code is available at: https://github.com/chwbob/Sam-Flow.

cs.CV↗

arXiv2026

Beyond Binary Contrast: Modeling Continuous Skeleton Action Spaces with Transitional Anchors

Self-supervised contrastive learning has emerged as a powerful paradigm for skeleton-based action recognition by enforcing consistency in the embedding space. However, existing methods rely on binary contrastive objectives that overlook the intrinsic continuity of human motion, resulting in fragmented feature clusters and rigid class boundaries. To address these limitations, we propose TranCLR, a Transitional anchor-based Contrastive Learning framework that captures the continuous geometry of the action space. Specifically, the proposed Action Transitional Anchor Construction (ATAC) explicitly models the geometric structure of transitional states to enhance the model's perception of motion continuity. Building upon these anchors, a Multi-Level Geometric Manifold Calibration (MGMC) mechanism is introduced to adaptively calibrate the action manifold across multiple levels of continuity, yielding a smoother and more discriminative representation space. Extensive experiments on the NTU RGB+D, NTU RGB+D 120 and PKU-MMD datasets demonstrate that TranCLR achieves superior accuracy and calibration performance, effectively learning continuous and uncertainty-aware skeleton representations. The code is available at https://github.com/Philchieh/TranCLR.

cs.CV↗

arXiv2026

GATS: Gaussian Aware Temporal Scaling Transformer for Invariant 4D Spatio-Temporal Point Cloud Representation

Understanding 4D point cloud videos is essential for enabling intelligent agents to perceive dynamic environments. However, temporal scale bias across varying frame rates and distributional uncertainty in irregular point clouds make it highly challenging to design a unified and robust 4D backbone. Existing CNN or Transformer based methods are constrained either by limited receptive fields or by quadratic computational complexity, while neglecting these implicit distortions. To address this problem, we propose a novel dual invariant framework, termed \textbf{Gaussian Aware Temporal Scaling (GATS)}, which explicitly resolves both distributional inconsistencies and temporal. The proposed \emph{Uncertainty Guided Gaussian Convolution (UGGC)} incorporates local Gaussian statistics and uncertainty aware gating into point convolution, thereby achieving robust neighborhood aggregation under density variation, noise, and occlusion. In parallel, the \emph{Temporal Scaling Attention (TSA)} introduces a learnable scaling factor to normalize temporal distances, ensuring frame partition invariance and consistent velocity estimation across different frame rates. These two modules are complementary: temporal scaling normalizes time intervals prior to Gaussian estimation, while Gaussian modeling enhances robustness to irregular distributions. Our experiments on mainstream benchmarks MSR-Action3D (\textbf{+6.62\%} accuracy), NTU RGBD (\textbf{+1.4\%} accuracy), and Synthia4D (\textbf{+1.8\%} mIoU) demonstrate significant performance gains, offering a more efficient and principled paradigm for invariant 4D point cloud video understanding with superior accuracy, robustness, and scalability compared to Transformer based counterparts.

cs.CV↗

arXiv2026

UniView: Enhancing Novel View Synthesis From A Single Image By Unifying Reference Features

The task of synthesizing novel views from a single image is highly ill-posed due to multiple explanations for unobserved areas. Most current methods tend to generate unseen regions from ambiguity priors and interpolation near input views, which often lead to severe distortions. To address this limitation, we propose a novel model dubbed as UniView, which can leverage reference images from a similar object to provide strong prior information during view synthesis. More specifically, we construct a retrieval and augmentation system and employ a multimodal large language model (MLLM) to assist in selecting reference images that meet our requirements. Additionally, a plug-and-play adapter module with multi-level isolation layers is introduced to dynamically generate reference features for the target views. Moreover, in order to preserve the details of an original input image, we design a decoupled triple attention mechanism, which can effectively align and integrate multi-branch features into the synthesis process. Extensive experiments have demonstrated that our UniView significantly improves novel view synthesis performance and outperforms state-of-the-art methods on the challenging datasets.

cs.CV↗

arXiv2025

SceneDecorator: Towards Scene-Oriented Story Generation with Scene Planning and Scene Consistency

Recent text-to-image models have revolutionized image generation, but they still struggle with maintaining concept consistency across generated images. While existing works focus on character consistency, they often overlook the crucial role of scenes in storytelling, which restricts their creativity in practice. This paper introduces scene-oriented story generation, addressing two key challenges: (i) scene planning, where current methods fail to ensure scene-level narrative coherence by relying solely on text descriptions, and (ii) scene consistency, which remains largely unexplored in terms of maintaining scene consistency across multiple stories. We propose SceneDecorator, a training-free framework that employs VLM-Guided Scene Planning to ensure narrative coherence across different scenes in a ``global-to-local'' manner, and Long-Term Scene-Sharing Attention to maintain long-term scene consistency and subject diversity across generated stories. Extensive experiments demonstrate the superior performance of SceneDecorator, highlighting its potential to unleash creativity in the fields of arts, films, and games.

cs.CV↗

arXiv2025

LLMControl: Grounded Control of Text-to-Image Diffusion-based Synthesis with Multimodal LLMs

Recent spatial control methods for text-to-image (T2I) diffusion models have shown compelling results. However, these methods still fail to precisely follow the control conditions and generate the corresponding images, especially when encountering the textual prompts that contain multiple objects or have complex spatial compositions. In this work, we present a LLM-guided framework called LLM\_Control to address the challenges of the controllable T2I generation task. By improving grounding capabilities, LLM\_Control is introduced to accurately modulate the pre-trained diffusion models, where visual conditions and textual prompts influence the structures and appearance generation in a complementary way. We utilize the multimodal LLM as a global controller to arrange spatial layouts, augment semantic descriptions and bind object attributes. The obtained control signals are injected into the denoising network to refocus and enhance attention maps according to novel sampling constraints. Extensive qualitative and quantitative experiments have demonstrated that LLM\_Control achieves competitive synthesis quality compared to other state-of-the-art methods across various pre-trained T2I models. It is noteworthy that LLM\_Control allows the challenging input conditions on which most of the existing methods

cs.CV↗

arXiv2025

Medical Large Vision Language Models with Multi-Image Visual Ability

Medical large vision-language models (LVLMs) have demonstrated promising performance across various single-image question answering (QA) benchmarks, yet their capability in processing multi-image clinical scenarios remains underexplored. Unlike single image based tasks, medical tasks involving multiple images often demand sophisticated visual understanding capabilities, such as temporal reasoning and cross-modal analysis, which are poorly supported by current medical LVLMs. To bridge this critical gap, we present the Med-MIM instruction dataset, comprising 83.2K medical multi-image QA pairs that span four types of multi-image visual abilities (temporal understanding, reasoning, comparison, co-reference). Using this dataset, we fine-tune Mantis and LLaVA-Med, resulting in two specialized medical VLMs: MIM-LLaVA-Med and Med-Mantis, both optimized for multi-image analysis. Additionally, we develop the Med-MIM benchmark to comprehensively evaluate the medical multi-image understanding capabilities of LVLMs. We assess eight popular LVLMs, including our two models, on the Med-MIM benchmark. Experimental results show that both Med-Mantis and MIM-LLaVA-Med achieve superior performance on the held-in and held-out subsets of the Med-MIM benchmark, demonstrating that the Med-MIM instruction dataset effectively enhances LVLMs' multi-image understanding capabilities in the medical domain.

cs.CV↗

arXiv2025

MagicTailor: Component-Controllable Personalization in Text-to-Image Diffusion Models

Text-to-image diffusion models can generate high-quality images but lack fine-grained control of visual concepts, limiting their creativity. Thus, we introduce component-controllable personalization, a new task that enables users to customize and reconfigure individual components within concepts. This task faces two challenges: semantic pollution, where undesired elements disrupt the target concept, and semantic imbalance, which causes disproportionate learning of the target concept and component. To address these, we design MagicTailor, a framework that uses Dynamic Masked Degradation to adaptively perturb unwanted visual semantics and Dual-Stream Balancing for more balanced learning of desired visual semantics. The experimental results show that MagicTailor achieves superior performance in this task and enables more personalized and creative image generation.

cs.CV↗

arXiv2025

SciVerse: Unveiling the Knowledge Comprehension and Visual Reasoning of LMMs on Multi-modal Scientific Problems

The rapid advancement of Large Multi-modal Models (LMMs) has enabled their application in scientific problem-solving, yet their fine-grained capabilities remain under-explored. In this paper, we introduce SciVerse, a multi-modal scientific evaluation benchmark to thoroughly assess LMMs across 5,735 test instances in five distinct versions. We aim to investigate three key dimensions of LMMs: scientific knowledge comprehension, multi-modal content interpretation, and Chain-of-Thought (CoT) reasoning. To unveil whether LMMs possess sufficient scientific expertise, we first transform each problem into three versions containing different levels of knowledge required for solving, i.e., Knowledge-free, -lite, and -rich. Then, to explore how LMMs interpret multi-modal scientific content, we annotate another two versions, i.e., Vision-rich and -only, marking more question information from texts to diagrams. Comparing the results of different versions, SciVerse systematically examines the professional knowledge stock and visual perception skills of LMMs in scientific domains. In addition, to rigorously assess CoT reasoning, we propose a new scientific CoT evaluation strategy, conducting a step-wise assessment on knowledge and logical errors in model outputs. Our extensive evaluation of different LMMs on SciVerse reveals critical limitations in their scientific proficiency and provides new insights into future developments. Project page: https://sciverse-cuhk.github.io

cs.CV↗

arXiv2024

Point Cloud Understanding via Attention-Driven Contrastive Learning

Recently Transformer-based models have advanced point cloud understanding by leveraging self-attention mechanisms, however, these methods often overlook latent information in less prominent regions, leading to increased sensitivity to perturbations and limited global comprehension. To solve this issue, we introduce PointACL, an attention-driven contrastive learning framework designed to address these limitations. Our method employs an attention-driven dynamic masking strategy that guides the model to focus on under-attended regions, enhancing the understanding of global structures within the point cloud. Then we combine the original pre-training loss with a contrastive learning loss, improving feature discrimination and generalization. Extensive experiments validate the effectiveness of PointACL, as it achieves state-of-the-art performance across a variety of 3D understanding tasks, including object classification, part segmentation, and few-shot learning. Specifically, when integrated with different Transformer backbones like Point-MAE and PointGPT, PointACL demonstrates improved performance on datasets such as ScanObjectNN, ModelNet40, and ShapeNetPart. This highlights its superior capability in capturing both global and local features, as well as its enhanced robustness against perturbations and incomplete data.

cs.CV↗

arXiv2024

MM-Mixing: Multi-Modal Mixing Alignment for 3D Understanding

We introduce MM-Mixing, a multi-modal mixing alignment framework for 3D understanding. MM-Mixing applies mixing-based methods to multi-modal data, preserving and optimizing cross-modal connections while enhancing diversity and improving alignment across modalities. Our proposed two-stage training pipeline combines feature-level and input-level mixing to optimize the 3D encoder. The first stage employs feature-level mixing with contrastive learning to align 3D features with their corresponding modalities. The second stage incorporates both feature-level and input-level mixing, introducing mixed point cloud inputs to further refine 3D feature representations. MM-Mixing enhances intermodality relationships, promotes generalization, and ensures feature consistency while providing diverse and realistic training samples. We demonstrate that MM-Mixing significantly improves baseline performance across various learning scenarios, including zero-shot 3D classification, linear probing 3D classification, and cross-modal 3D shape retrieval. Notably, we improved the zero-shot classification accuracy on ScanObjectNN from 51.3% to 61.9%, and on Objaverse-LVIS from 46.8% to 51.4%. Our findings highlight the potential of multi-modal mixing-based alignment to significantly advance 3D object recognition and understanding while remaining straightforward to implement and integrate into existing frameworks.

cs.CV↗

arXiv2024

SFANet: Spatial-Frequency Attention Network for Weather Forecasting

Weather forecasting plays a critical role in various sectors, driving decision-making and risk management. However, traditional methods often struggle to capture the complex dynamics of meteorological systems, particularly in the presence of high-resolution data. In this paper, we propose the Spatial-Frequency Attention Network (SFANet), a novel deep learning framework designed to address these challenges and enhance the accuracy of spatiotemporal weather prediction. Drawing inspiration from the limitations of existing methodologies, we present an innovative approach that seamlessly integrates advanced token mixing and attention mechanisms. By leveraging both pooling and spatial mixing strategies, SFANet optimizes the processing of high-dimensional spatiotemporal sequences, preserving inter-component relational information and modeling extensive long-range relationships. To further enhance feature integration, we introduce a novel spatial-frequency attention module, enabling the model to capture intricate cross-modal correlations. Our extensive experimental evaluation on two distinct datasets, the Storm EVent ImageRy (SEVIR) and the Institute for Climate and Application Research (ICAR) - El Niño Southern Oscillation (ENSO) dataset, demonstrates the remarkable performance of SFANet. Notably, SFANet achieves substantial advancements over state-of-the-art methods, showcasing its proficiency in forecasting precipitation patterns and predicting El Niño events.

cs.CV↗

arXiv2024

SignVTCL: Multi-Modal Continuous Sign Language Recognition Enhanced by Visual-Textual Contrastive Learning

Sign language recognition (SLR) plays a vital role in facilitating communication for the hearing-impaired community. SLR is a weakly supervised task where entire videos are annotated with glosses, making it challenging to identify the corresponding gloss within a video segment. Recent studies indicate that the main bottleneck in SLR is the insufficient training caused by the limited availability of large-scale datasets. To address this challenge, we present SignVTCL, a multi-modal continuous sign language recognition framework enhanced by visual-textual contrastive learning, which leverages the full potential of multi-modal data and the generalization ability of language model. SignVTCL integrates multi-modal data (video, keypoints, and optical flow) simultaneously to train a unified visual backbone, thereby yielding more robust visual representations. Furthermore, SignVTCL contains a visual-textual alignment approach incorporating gloss-level and sentence-level alignment to ensure precise correspondence between visual features and glosses at the level of individual glosses and sentence. Experimental results conducted on three datasets, Phoenix-2014, Phoenix-2014T, and CSL-Daily, demonstrate that SignVTCL achieves state-of-the-art results compared with previous methods.

cs.CV↗

arXiv2023

Object-Centric Multiple Object Tracking

Unsupervised object-centric learning methods allow the partitioning of scenes into entities without additional localization information and are excellent candidates for reducing the annotation burden of multiple-object tracking (MOT) pipelines. Unfortunately, they lack two key properties: objects are often split into parts and are not consistently tracked over time. In fact, state-of-the-art models achieve pixel-level accuracy and temporal consistency by relying on supervised object detection with additional ID labels for the association through time. This paper proposes a video object-centric model for MOT. It consists of an index-merge module that adapts the object-centric slots into detection outputs and an object memory module that builds complete object prototypes to handle occlusions. Benefited from object-centric learning, we only require sparse detection labels (0%-6.25%) for object localization and feature binding. Relying on our self-supervised Expectation-Maximization-inspired loss for object association, our approach requires no ID labels. Our experiments significantly narrow the gap between the existing object-centric model and the fully supervised state-of-the-art and outperform several unsupervised trackers.

cs.CV↗

arXiv2023

PointPatchMix: Point Cloud Mixing with Patch Scoring

Data augmentation is an effective regularization strategy for mitigating overfitting in deep neural networks, and it plays a crucial role in 3D vision tasks, where the point cloud data is relatively limited. While mixing-based augmentation has shown promise for point clouds, previous methods mix point clouds either on block level or point level, which has constrained their ability to strike a balance between generating diverse training samples and preserving the local characteristics of point clouds. Additionally, the varying importance of each part of the point clouds has not been fully considered, cause not all parts contribute equally to the classification task, and some parts may contain unimportant or redundant information. To overcome these challenges, we propose PointPatchMix, a novel approach that mixes point clouds at the patch level and integrates a patch scoring module to generate content-based targets for mixed point clouds. Our approach preserves local features at the patch level, while the patch scoring module assigns targets based on the content-based significance score from a pre-trained teacher model. We evaluate PointPatchMix on two benchmark datasets, ModelNet40 and ScanObjectNN, and demonstrate significant improvements over various baselines in both synthetic and real-world datasets, as well as few-shot settings. With Point-MAE as our baseline, our model surpasses previous methods by a significant margin, achieving 86.3% accuracy on ScanObjectNN and 94.1% accuracy on ModelNet40. Furthermore, our approach shows strong generalization across multiple architectures and enhances the robustness of the baseline model.

cs.CV↗

arXiv2023

Traj-MAE: Masked Autoencoders for Trajectory Prediction

Trajectory prediction has been a crucial task in building a reliable autonomous driving system by anticipating possible dangers. One key issue is to generate consistent trajectory predictions without colliding. To overcome the challenge, we propose an efficient masked autoencoder for trajectory prediction (Traj-MAE) that better represents the complicated behaviors of agents in the driving environment. Specifically, our Traj-MAE employs diverse masking strategies to pre-train the trajectory encoder and map encoder, allowing for the capture of social and temporal information among agents while leveraging the effect of environment from multiple granularities. To address the catastrophic forgetting problem that arises when pre-training the network with multiple masking strategies, we introduce a continual pre-training framework, which can help Traj-MAE learn valuable and diverse information from various strategies efficiently. Our experimental results in both multi-agent and single-agent settings demonstrate that Traj-MAE achieves competitive results with state-of-the-art methods and significantly outperforms our baseline model.

cs.CV↗