arXiv subjects

Jie Zhou

Publications and source records attributed to Jie Zhou.

At least 379 records · Page 21Linked to original sources

arXiv2024

Single-crystalline GaAs/Si Heterojunction Tunnel Diodes Interfaced by an Ultrathin Oxygen-enriched Layer

We report the fabrication and characteristics of GaAs/Si p+/n+ heterojunction tunnel diodes. These diodes were fabricated via grafting the freestanding single-crystalline p-type degenerately doped GaAs (4E19 cm-3) nanomembrane (NM) onto single-crystalline n-type Si (5E19 cm-3) substrate. At the heterointerface, an amorphous ultrathin oxygen-enriched layer (UOL) was intentionally engineered through chemical oxidation and atomic layer deposition (ALD). Scanning transmission electron microscopy (STEM) confirmed the formation of the UOL and the single crystallinity of the grafted junction. The resulting tunnel diodes consistently exhibited negative differential resistance (NDR) behavior at room temperature, with a high maximum peak-to-valley current ratio (PVCR) of 36.38, valley voltages ranging from 1.3 to 1.8 V, and a peak tunneling current density of 0.95 kA/cm2. This study not only highlights the critical roles of the UOL as both an interface improvement layer and a quantum tunneling medium, but also establishes "semiconductor grafting" as an effective and versatile method for high-performance, lattice-mismatched heterojunction devices.

physics.app-ph↗

arXiv2024

Grafted AlGaAs/GeSn Optical Pumping Laser Operating up to 130 K

Group IV GeSn double-heterostructure (DHS) lasers offer unique advantages of a direct bandgap and CMOS compatibility. However, further improvements in laser performance have been bottlenecked by limited junction properties of GeSn through conventional epitaxy and wafer bonding. This work leverages semiconductor grafting to synthesize and characterize optically pumped ridge edge-emitting lasers (EELs) with an AlGaAs nanomembrane (NM) transfer-printed onto an epitaxially grown GeSn substrate, interfaced by an ultrathin Al2O3 layer. The grafted AlGaAs/GeSn DHS lasers show a lasing threshold of 11.06 mW at 77 K and a maximum lasing temperature of 130 K. These results highlight the potential of the grafting technique for enhancing charge carrier and optical field confinements, paving the way for room-temperature electrically injected GeSn lasers.

physics.optics↗

arXiv2024

DrawingSpinUp: 3D Animation from Single Character Drawings

Animating various character drawings is an engaging visual content creation task. Given a single character drawing, existing animation methods are limited to flat 2D motions and thus lack 3D effects. An alternative solution is to reconstruct a 3D model from a character drawing as a proxy and then retarget 3D motion data onto it. However, the existing image-to-3D methods could not work well for amateur character drawings in terms of appearance and geometry. We observe the contour lines, commonly existing in character drawings, would introduce significant ambiguity in texture synthesis due to their view-dependence. Additionally, thin regions represented by single-line contours are difficult to reconstruct (e.g., slim limbs of a stick figure) due to their delicate structures. To address these issues, we propose a novel system, DrawingSpinUp, to produce plausible 3D animations and breathe life into character drawings, allowing them to freely spin up, leap, and even perform a hip-hop dance. For appearance improvement, we adopt a removal-then-restoration strategy to first remove the view-dependent contour lines and then render them back after retargeting the reconstructed character. For geometry refinement, we develop a skeleton-based thinning deformation algorithm to refine the slim structures represented by the single-line contours. The experimental evaluations and a perceptual user study show that our proposed method outperforms the existing 2D and 3D animation methods and generates high-quality 3D animations from a single character drawing. Please refer to our project page (https://lordliang.github.io/DrawingSpinUp) for the code and generated animations.

cs.GR↗

arXiv2024

DC-Solver: Improving Predictor-Corrector Diffusion Sampler via Dynamic Compensation

Diffusion probabilistic models (DPMs) have shown remarkable performance in visual synthesis but are computationally expensive due to the need for multiple evaluations during the sampling. Recent predictor-corrector diffusion samplers have significantly reduced the required number of function evaluations (NFE), but inherently suffer from a misalignment issue caused by the extra corrector step, especially with a large classifier-free guidance scale (CFG). In this paper, we introduce a new fast DPM sampler called DC-Solver, which leverages dynamic compensation (DC) to mitigate the misalignment of the predictor-corrector samplers. The dynamic compensation is controlled by compensation ratios that are adaptive to the sampling steps and can be optimized on only 10 datapoints by pushing the sampling trajectory toward a ground truth trajectory. We further propose a cascade polynomial regression (CPR) which can instantly predict the compensation ratios on unseen sampling configurations. Additionally, we find that the proposed dynamic compensation can also serve as a plug-and-play module to boost the performance of predictor-only samplers. Extensive experiments on both unconditional sampling and conditional sampling demonstrate that our DC-Solver can consistently improve the sampling quality over previous methods on different DPMs with a wide range of resolutions up to 1024$\times$1024. Notably, we achieve 10.38 FID (NFE=5) on unconditional FFHQ and 0.394 MSE (NFE=5, CFG=7.5) on Stable-Diffusion-2.1. Code is available at https://github.com/wl-zhao/DC-Solver

cs.CV↗

arXiv2024

DeTRAP: RISC-V Return Address Protection With Debug Triggers

Modern microcontroller software is often written in C/C++ and suffers from control-flow hijacking vulnerabilities. Previous mitigations suffer from high performance and memory overheads and require either the presence of memory protection hardware or sophisticated program analysis in the compiler. This paper presents DeTRAP (Debug Trigger Return Address Protection). DeTRAP utilizes a full implementation of the RISC-V debug hardware specification to provide a write-protected shadow stack for return addresses. Unlike previous work, DeTRAP requires no memory protection hardware and only minor changes to the compiler toolchain. We tested DeTRAP on an FPGA running a 32-bit RISC-V microcontroller core and found average execution time overheads to be between 0.5% and 1.9% on evaluated benchmark suites with code size overheads averaging 7.9% or less.

cs.CR↗

arXiv2024

Characterization of AlGaAs/GeSn heterojunction band alignment via X-ray photoelectron spectroscopy

GeSn-based SWIR lasers featuring imaging, sensing, and communications has gained dynamic development recently. However, the existing SiGeSn/GeSn double heterostructure lacks adequate electron confinement and is insufficient for room temperature lasing. The recently demonstrated semiconductor grafting technique provides a viable approach towards AlGaAs/GeSn p-i-n heterojunctions with better electron confinement and high-quality interfaces, promising for room temperature electrically pumped GeSn laser devices. Therefore, understanding and quantitatively characterizing the band alignment in this grafted heterojunction is crucial. In this study, we explore the band alignment in the grafted monocrystalline Al0.3Ga0.7As /Ge0.853Sn0.147 p-i-n heterojunction. We determined the bandgap values of AlGaAs and GeSn to be 1.81 eV and 0.434 eV by photoluminescence measurements, respectively. We further conducted X-ray photoelectron spectroscopy measurements and extracted a valence band offset of 0.19 eV and a conduction band offset of 1.186 eV. A Type-I band alignment was confirmed which effectively confining electrons at the AlGaAs/GeSn interface. This study improves our understanding of the interfacial band structure in grafted AlGaAs/GeSn heterostructure, providing experimental evidence of the Type-I band alignment between AlGaAs and GeSn, and paving the way for their application in laser technologies.

physics.app-ph↗

arXiv2024

Quantum state transfer between superconducting cavities via exchange-free interactions

We propose and experimentally demonstrate a novel protocol for transferring quantum states between superconducting cavities using only continuous two-mode squeezing interactions, without exchange of photonic excitations between cavities. This approach conceptually resembles quantum teleportation, where quantum information is transferred between different nodes without directly transmitting carrier photons. In contrast to the discrete operations of entanglement and Bell-state measurement in teleportation, our scheme is symmetric and continuous. We experimentally realize coherent and bidirectional transfer of arbitrary quantum states, including bosonic quantum error correction codes. Our results offer new insights into the quantum state transfer and quantum teleportation. In particular, our demonstration validates a new approach to realize quantum transducers, and might find applications in a wide range of physical platforms.

quant-ph↗

arXiv2024

MedDiT: A Knowledge-Controlled Diffusion Transformer Framework for Dynamic Medical Image Generation in Virtual Simulated Patient

Medical education relies heavily on Simulated Patients (SPs) to provide a safe environment for students to practice clinical skills, including medical image analysis. However, the high cost of recruiting qualified SPs and the lack of diverse medical imaging datasets have presented significant challenges. To address these issues, this paper introduces MedDiT, a novel knowledge-controlled conversational framework that can dynamically generate plausible medical images aligned with simulated patient symptoms, enabling diverse diagnostic skill training. Specifically, MedDiT integrates various patient Knowledge Graphs (KGs), which describe the attributes and symptoms of patients, to dynamically prompt Large Language Models' (LLMs) behavior and control the patient characteristics, mitigating hallucination during medical conversation. Additionally, a well-tuned Diffusion Transformer (DiT) model is incorporated to generate medical images according to the specified patient attributes in the KG. In this paper, we present the capabilities of MedDiT through a practical demonstration, showcasing its ability to act in diverse simulated patient cases and generate the corresponding medical images. This can provide an abundant and interactive learning experience for students, advancing medical education by offering an immersive simulation platform for future healthcare professionals. The work sheds light on the feasibility of incorporating advanced technologies like LLM, KG, and DiT in education applications, highlighting their potential to address the challenges faced in simulated patient-based medical education.

cs.AI↗

arXiv2024

Microsatellite-based real-time quantum key distribution

A quantum network provides an infrastructure connecting quantum devices with revolutionary computing, sensing, and communication capabilities. As the best-known application of a quantum network, quantum key distribution (QKD) shares secure keys guaranteed by the laws of quantum mechanics. A quantum satellite constellation offers a solution to facilitate the quantum network on a global scale. The Micius satellite has verified the feasibility of satellite quantum communications, however, scaling up quantum satellite constellations is challenging, requiring small lightweight satellites, portable ground stations and real-time secure key exchange. Here we tackle these challenges and report the development of a quantum microsatellite capable of performing space-to-ground QKD using portable ground stations. The quantum microsatellite features a payload weighing approximately 23 kg, while the portable ground station weighs about 100 kg. These weights represent reductions by more than an order and two orders of magnitude, respectively, compared to the Micius satellite. Additionally, we multiplex bidirectional satellite-ground optical communication with quantum communication, enabling key distillation and secure communication in real-time. Using the microsatellite and the portable ground stations, we demonstrate satellite-based QKD with multiple ground stations and achieve the sharing of up to 0.59 million bits of secure keys during a single satellite pass. The compact quantum payload can be readily assembled on existing space stations or small satellites, paving the way for a satellite-constellation-based quantum and classical network for widespread real-life applications.

quant-ph↗

arXiv2024

Scene-wise Adaptive Network for Dynamic Cold-start Scenes Optimization in CTR Prediction

In the realm of modern mobile E-commerce, providing users with nearby commercial service recommendations through location-based online services has become increasingly vital. While machine learning approaches have shown promise in multi-scene recommendation, existing methodologies often struggle to address cold-start problems in unprecedented scenes: the increasing diversity of commercial choices, along with the short online lifespan of scenes, give rise to the complexity of effective recommendations in online and dynamic scenes. In this work, we propose Scene-wise Adaptive Network (SwAN), a novel approach that emphasizes high-performance cold-start online recommendations for new scenes. Our approach introduces several crucial capabilities, including scene similarity learning, user-specific scene transition cognition, scene-specific information construction for the new scene, and enhancing the diverged logical information between scenes. We demonstrate SwAN's potential to optimize dynamic multi-scene recommendation problems by effectively online handling cold-start recommendations for any newly arrived scenes. More encouragingly, SwAN has been successfully deployed in Meituan's online catering recommendation service, which serves millions of customers per day, and SwAN has achieved a 5.64% CTR index improvement relative to the baselines and a 5.19% increase in daily order volume proportion.

cs.IR↗

arXiv2024

Modeling Comparative Logical Relation with Contrastive Learning for Text Generation

Data-to-Text Generation (D2T), a classic natural language generation problem, aims at producing fluent descriptions for structured input data, such as a table. Existing D2T works mainly focus on describing the superficial associative relations among entities, while ignoring the deep comparative logical relations, such as A is better than B in a certain aspect with a corresponding opinion, which is quite common in our daily life. In this paper, we introduce a new D2T task named comparative logical relation generation (CLRG). Additionally, we propose a Comparative Logic (CoLo) based text generation method, which generates texts following specific comparative logical relations with contrastive learning. Specifically, we first construct various positive and negative samples by fine-grained perturbations in entities, aspects and opinions. Then, we perform contrastive learning in the encoder layer to have a better understanding of the comparative logical relations, and integrate it in the decoder layer to guide the model to correctly generate the relations. Noting the data scarcity problem, we construct a Chinese Comparative Logical Relation Dataset (CLRD), which is a high-quality human-annotated dataset and challenging for text generation with descriptions of multiple entities and annotations on their comparative logical relations. Extensive experiments show that our method achieves impressive performance in both automatic and human evaluations.

cs.CL↗

arXiv2024

AlGaAs/GeSn p-i-n diode interfaced with ultrathin Al$_2$O$_3$

This study presents the fabrication and characterizations of an Al$_{0.3}$Ga$_{0.7}$As/Ge$_{0.87}$Sn$_{0.13}$/GeSn p-i-n double heterostructure (DHS) diode following the grafting approach for enhanced optoelectronic applications. By integrating ultra-thin Al$_2$O$_3$ as a quantum tunneling layer and enhancing interfacial double-side passivation, we achieved a heterostructure with a substantial 1.186 eV conduction band barrier between AlGaAs and GeSn, along with a low interfacial density of states. The diode demonstrated impressive electrical characteristics with high uniformity, including a mean ideality factor of 1.47 and a mean rectification ratio of 2.95E103 at +/-2 V across 326 devices, indicating high-quality device fabrication. Comprehensive electrical characterizations, including C-V and I-V profiling, affirm the diode's capability to provide robust electrical confinement and efficient carrier injection. These properties make the Al$_{0.3}$Ga$_{0.7}$As/Ge$_{0.87}$Sn$_{0.13}$/GeSn DHS a promising candidate for next-generation electrically pumped GeSn lasers, potentially operable at higher temperatures. Our results provide a viable pathway for further advancements in various GeSn-based devices.

physics.app-ph↗

arXiv2024

MiniCPM-V: A GPT-4V Level MLLM on Your Phone

The recent surge of Multimodal Large Language Models (MLLMs) has fundamentally reshaped the landscape of AI research and industry, shedding light on a promising path toward the next AI milestone. However, significant challenges remain preventing MLLMs from being practical in real-world applications. The most notable challenge comes from the huge cost of running an MLLM with a massive number of parameters and extensive computation. As a result, most MLLMs need to be deployed on high-performing cloud servers, which greatly limits their application scopes such as mobile, offline, energy-sensitive, and privacy-protective scenarios. In this work, we present MiniCPM-V, a series of efficient MLLMs deployable on end-side devices. By integrating the latest MLLM techniques in architecture, pretraining and alignment, the latest MiniCPM-Llama3-V 2.5 has several notable features: (1) Strong performance, outperforming GPT-4V-1106, Gemini Pro and Claude 3 on OpenCompass, a comprehensive evaluation over 11 popular benchmarks, (2) strong OCR capability and 1.8M pixel high-resolution image perception at any aspect ratio, (3) trustworthy behavior with low hallucination rates, (4) multilingual support for 30+ languages, and (5) efficient deployment on mobile phones. More importantly, MiniCPM-V can be viewed as a representative example of a promising trend: The model sizes for achieving usable (e.g., GPT-4V) level performance are rapidly decreasing, along with the fast growth of end-side computation capacity. This jointly shows that GPT-4V level MLLMs deployed on end devices are becoming increasingly possible, unlocking a wider spectrum of real-world AI applications in the near future.

cs.CV↗

arXiv2024

UniTTA: Unified Benchmark and Versatile Framework Towards Realistic Test-Time Adaptation

Test-Time Adaptation (TTA) aims to adapt pre-trained models to the target domain during testing. In reality, this adaptability can be influenced by multiple factors. Researchers have identified various challenging scenarios and developed diverse methods to address these challenges, such as dealing with continual domain shifts, mixed domains, and temporally correlated or imbalanced class distributions. Despite these efforts, a unified and comprehensive benchmark has yet to be established. To this end, we propose a Unified Test-Time Adaptation (UniTTA) benchmark, which is comprehensive and widely applicable. Each scenario within the benchmark is fully described by a Markov state transition matrix for sampling from the original dataset. The UniTTA benchmark considers both domain and class as two independent dimensions of data and addresses various combinations of imbalance/balance and i.i.d./non-i.i.d./continual conditions, covering a total of $ (2 \times 3)^2 = 36 $ scenarios. It establishes a comprehensive evaluation benchmark for realistic TTA and provides a guideline for practitioners to select the most suitable TTA method. Alongside this benchmark, we propose a versatile UniTTA framework, which includes a Balanced Domain Normalization (BDN) layer and a COrrelated Feature Adaptation (COFA) method--designed to mitigate distribution gaps in domain and class, respectively. Extensive experiments demonstrate that our UniTTA framework excels within the UniTTA benchmark and achieves state-of-the-art performance on average. Our code is available at \url{https://github.com/LeapLabTHU/UniTTA}.

cs.CV↗

arXiv2024

Boosting Large Language Models with Socratic Method for Conversational Mathematics Teaching

With the introduction of large language models (LLMs), automatic math reasoning has seen tremendous success. However, current methods primarily focus on providing solutions or using techniques like Chain-of-Thought to enhance problem-solving accuracy. In this paper, we focus on improving the capability of mathematics teaching via a Socratic teaching-based LLM (\texttt{SocraticLLM}), which guides learners toward profound thinking with clarity and self-discovery via conversation. We collect and release a high-quality mathematical teaching dataset, named \texttt{SocraticMATH}, which provides Socratic-style conversations of problems with extra knowledge. Also, we propose a knowledge-enhanced LLM as a strong baseline to generate reliable responses with review, guidance/heuristic, rectification, and summarization. Experimental results show the great advantages of \texttt{SocraticLLM} by comparing it with several strong generative models. The codes and datasets are available on \url{https://github.com/ECNU-ICALK/SocraticMath}.

cs.CL↗

arXiv2024

Mobius: A High Efficient Spatial-Temporal Parallel Training Paradigm for Text-to-Video Generation Task

Inspired by the success of the text-to-image (T2I) generation task, many researchers are devoting themselves to the text-to-video (T2V) generation task. Most of the T2V frameworks usually inherit from the T2I model and add extra-temporal layers of training to generate dynamic videos, which can be viewed as a fine-tuning task. However, the traditional 3D-Unet is a serial mode and the temporal layers follow the spatial layers, which will result in high GPU memory and training time consumption according to its serial feature flow. We believe that this serial mode will bring more training costs with the large diffusion model and massive datasets, which are not environmentally friendly and not suitable for the development of the T2V. Therefore, we propose a highly efficient spatial-temporal parallel training paradigm for T2V tasks, named Mobius. In our 3D-Unet, the temporal layers and spatial layers are parallel, which optimizes the feature flow and backpropagation. The Mobius will save 24% GPU memory and 12% training time, which can greatly improve the T2V fine-tuning task and provide a novel insight for the AIGC community. We will release our codes in the future.

cs.CV↗

arXiv2024

Beyond Binary Gender: Evaluating Gender-Inclusive Machine Translation with Ambiguous Attitude Words

Gender bias has been a focal point in the study of bias in machine translation and language models. Existing machine translation gender bias evaluations are primarily focused on male and female genders, limiting the scope of the evaluation. To assess gender bias accurately, these studies often rely on calculating the accuracy of gender pronouns or the masculine and feminine attributes of grammatical gender via the stereotypes triggered by occupations or sentiment words ({\em i.e.}, clear positive or negative attitude), which cannot extend to non-binary groups. This study presents a benchmark AmbGIMT (Gender-Inclusive Machine Translation with Ambiguous attitude words), which assesses gender bias beyond binary gender. Meanwhile, we propose a novel process to evaluate gender bias based on the Emotional Attitude Score (EAS), which is used to quantify ambiguous attitude words. In evaluating three recent and effective open-source LLMs and one powerful multilingual translation-specific model, our main observations are: (1) The translation performance within non-binary gender contexts is markedly inferior in terms of translation quality and exhibits more negative attitudes than binary-gender contexts. (2) The analysis experiments indicate that incorporating constraint context in prompts for gender identity terms can substantially reduce translation bias, while the bias remains evident despite the presence of the constraints. The code is publicly available at \url{https://github.com/pppa2019/ambGIMT}.

cs.CL↗

arXiv2024

UltraEval: A Lightweight Platform for Flexible and Comprehensive Evaluation for LLMs

Evaluation is pivotal for refining Large Language Models (LLMs), pinpointing their capabilities, and guiding enhancements. The rapid development of LLMs calls for a lightweight and easy-to-use framework for swift evaluation deployment. However, considering various implementation details, developing a comprehensive evaluation platform is never easy. Existing platforms are often complex and poorly modularized, hindering seamless incorporation into research workflows. This paper introduces UltraEval, a user-friendly evaluation framework characterized by its lightweight nature, comprehensiveness, modularity, and efficiency. We identify and reimplement three core components of model evaluation (models, data, and metrics). The resulting composability allows for the free combination of different models, tasks, prompts, benchmarks, and metrics within a unified evaluation workflow. Additionally, UltraEval supports diverse models owing to a unified HTTP service and provides sufficient inference acceleration. UltraEval is now available for researchers publicly.

cs.CL↗