arXiv subjects

Jieao Zhu

Publications and source records attributed to Jieao Zhu.

At least 19 recordsLinked to original sources

arXiv2025

General Signal Model and Capacity Limit for Rydberg Quantum Information System

Rydberg atomic receivers represent a transformative approach to achieving high-sensitivity, broadband, and miniaturized radio frequency (RF) reception. However, existing static signal models for Rydberg atomic receivers rely on the steady-state assumption of atomic quantum states, which cannot fully describe the signal reception process of dynamic signals. To fill in this gap, in this paper, we present a general model to compute the dynamic signal response of Rydberg atomic receivers in closed form. Specifically, by applying small-signal perturbation techniques to the quantum master equation, we derive closed-form Laplace domain transfer functions that characterize the receiver's dynamic responses to time-varying signal fields. To gain more insights into the quantum-based RF-photocurrent conversion process, we further introduce the concept of quantum transconductance that describes the quantum system as an equivalent classical system. By applying quantum transconductance, we quantify the influence of in-band blackbody radiation (BBR) noise on the atomic receiver sensitivity. Extensive simulations for Rydberg atomic receivers validate the proposed signal model, and demonstrate the possibility of quantum receivers to outperform classical electronic receivers through the improvement of quantum transconductance.

eess.SP↗

arXiv2025

Unified Error Correction Code Transformer with Low Complexity

Channel coding is vital for reliable sixth-generation (6G) data transmission, employing diverse error correction codes for various application scenarios. Traditional decoders require dedicated hardware for each code, leading to high hardware costs. Recently, artificial intelligence (AI)-driven approaches, such as the error correction code Transformer (ECCT) and its enhanced version, the foundation error correction code Transformer (FECCT), have been proposed to reduce the hardware cost by leveraging the Transformer to decode multiple codes. However, their excessively high computational complexity of $\mathcal{O}(N^2)$ due to the self-attention mechanism in the Transformer limits scalability, where $N$ represents the sequence length. To reduce computational complexity, we propose a unified Transformer-based decoder that handles multiple linear block codes within a single framework. Specifically, a standardized unit is employed to align code length and code rate across different code types, while a redesigned low-rank unified attention module, with computational complexity of $\mathcal{O}(N)$, is shared across various heads in the Transformer. Additionally, a sparse mask, derived from the parity-check matrix's sparsity, is introduced to enhance the decoder's ability to capture inherent constraints between information and parity-check bits, improving decoding accuracy and further reducing computational complexity by $86\%$. Extensive experimental results demonstrate that the proposed unified Transformer-based decoder outperforms existing methods and provides a high-performance, low-complexity solution for next-generation wireless communication systems.

cs.IT↗

arXiv2025

RAQ-MIMO: MIMO for Multi-Band Rydberg Atomic Quantum Receiver

Rydberg atomic quantum receivers (RAQRs) are capable of receiving multi-band radio-frequency (RF) signals simultaneously, which are expected to break Chu's limit for classical electronic antennas. However, signals from different users will interfere with each other in the optical intermediate frequency (IF) domain of the multi-band quantum receiver, which is termed the IF interference (IFI) problem. To address this problem, in this paper, we propose a multi-input multi-output (MIMO) architecture for Rydberg atomic quantum receiver (RAQ-MIMO) by exploiting the additional spatial diversity of MIMO receivers. Specifically, by applying the dynamic signal model of RAQRs, we clarify the physical relationship between the quantum local oscillator (LO) configurations and the multi-band gains with the concept of quantum transconductance. Then, with the quantum transconductance-based signal model, we formulate the spectral efficiency (SE) maximization problem and further propose the quantum weighted minimum mean square error (qWMMSE) algorithm, which jointly optimizes the quantum LO configurations and the classical precoder/combiner matrices. Furthermore, we test the qWMMSE algorithm within the standard space division multiple access (SDMA) scheme and the frequency division multiple access (FDMA) scheme. Simulation results demonstrate that the qWMMSE optimization framework can significantly improve the SE of RAQ-MIMO systems for both multiple access schemes, and that RAQ-MIMO systems can outperform classical electronic receiver-based multi-user MIMO systems by eliminating the mutual coupling effect between classical antennas.

cs.IT↗

arXiv2025

A General DoF and Pattern Analyzing Scheme for Electromagnetic Information Theory

Electromagnetic information theory (EIT) is one of the emerging topics for 6G communication due to its potential to reveal the performance limit of wireless communication systems. For EIT, one of the most important research directions is degree of freedom (DoF) analysis. Existing research works on DoF analysis for EIT focus on asymptotic conclusions of DoF, which do not well fit the practical wireless communication systems with finite spatial regions and finite frequency bandwidth. In this paper, we use the theoretical analyzing tools from Slepian concentration problem and extend them to three-dimensional space domain and four-dimensional space-time domain under electromagnetic constraints. Then we provide asymptotic DoF conclusions and non-asymptotic DoF analyzing scheme, which suits practical scenarios better, under different scenarios like three-dimensional antenna array. Moreover, we theoretically prove that the channel DoF is upper bounded by the proposed DoF of electromagnetic fields. Finally, we use numerical analysis to provide some insights about the optimal spatial sampling interval of the antenna array, the DoF of three-dimensional antenna array, the impact of unequal antenna spacing, the orthogonal space-time patterns, etc.

cs.IT↗

arXiv2024

Spatio-Temporal Electromagnetic Kernel Learning for Channel Prediction

Accurate channel prediction is essential for addressing channel aging caused by user mobility. However, the actual channel variations over time are highly complex in high-mobility scenarios, which makes it difficult for existing predictors to obtain future channels accurately. The low accuracy of channel predictors leads to difficulties in supporting reliable communication. To overcome this challenge, we propose a channel predictor based on spatio-temporal electromagnetic (EM) kernel learning (STEM-KL). Specifically, inspired by recent advancements in EM information theory (EIT), the STEM kernel function is derived. The velocity and the concentration kernel parameters are designed to reflect the time-varying propagation of the wireless signal. We obtain the parameters through kernel learning. Then, the future channels are predicted by computing their Bayesian posterior, with the STEM kernel acting as the prior. To further improve the stability and model expressibility, we propose a grid-based EM mixed kernel learning (GEM-KL) scheme. We design the mixed kernel to be a convex combination of multiple sub-kernels, where each of the sub-kernel corresponds to a grid point in the set of pre-selected parameters. This approach transforms non-convex STEM kernel learning problem into a convex grid-based problem that can be easily solved by weight optimization. Finally, simulation results verify that the proposed STEM-KL and GEM-KL schemes can achieve more accurate channel prediction. This indicates that EIT can improve the performance of wireless system efficiently.

eess.SP↗

arXiv2024

Electromagnetic Information Theory-Based Statistical Channel Model for Improved Channel Estimation

Electromagnetic information theory (EIT) is an emerging interdisciplinary subject that integrates classical Maxwell electromagnetics and Shannon information theory. The goal of EIT is to uncover the information transmission mechanisms from an electromagnetic (EM) perspective in wireless systems. Existing works on EIT are mainly focused on the analysis of EM channel characteristics, degrees-of-freedom, and system capacity. However, these works do not clarify how to integrate EIT knowledge into the design and optimization of wireless systems. To fill in this gap, in this paper, we propose an EIT-based statistical channel model with simplified parameterization. Thanks to the simplified closed-form expression of the EMCF, it can be readily applied to various channel modeling and inference tasks. Specifically, by averaging the solutions of Maxwell's equations over a tunable von Mises distribution, we obtain a spatio-temporal correlation function (STCF) model of the EM channel, which we name as the EMCF. Furthermore, by tuning the parameters of the EMCF, we propose an EIT-based covariance estimator (EIT-Cov) to accurately capture the channel covariance. Since classical MMSE estimators can exploit prior information contained in the channel covariance matrix, we further propose the EIT-MMSE channel estimator by substituting EMCF for the covariance matrix. Simulation results show that both the proposed EIT-Cov covariance estimator and the EIT-MMSE channel estimator outperform their baseline algorithms, thus proving that EIT is beneficial to wireless communication systems.

cs.IT↗

arXiv2024

Successive Bayesian Reconstructor for Channel Estimation in Fluid Antenna Systems

Fluid antenna systems (FASs) can reconfigure their antenna locations freely within a spatially continuous space. To keep favorable antenna positions, the channel state information (CSI) acquisition for FASs is essential. While some techniques have been proposed, most existing FAS channel estimators require several channel assumptions, such as slow variation and angular-domain sparsity. When these assumptions are not reasonable, the model mismatch may lead to unpredictable performance losses. In this paper, we propose the successive Bayesian reconstructor (S-BAR) as a general solution to estimate FAS channels. Unlike model-based estimators, the proposed S-BAR is prior-aided, which builds the experiential kernel for CSI acquisition. Inspired by Bayesian regression, the key idea of S-BAR is to model the FAS channels as a stochastic process, whose uncertainty can be successively eliminated by kernel-based sampling and regression. In this way, the predictive mean of the regressed stochastic process can be viewed as a Bayesian channel estimator. Simulation results verify that, in both model-mismatched and model-matched cases, the proposed S-BAR can achieve higher estimation accuracy than the existing schemes.

cs.IT↗

arXiv2024

A physics-based perspective for understanding and utilizing spatial resources of wireless channels

To satisfy the increasing demands for transmission rates of wireless communications, it is necessary to use spatial resources of electromagnetic (EM) waves. In this context, EM information theory (EIT) has become a hot topic by integrating the theoretical framework of deterministic mathematics and stochastic statistics to explore the transmission mechanisms of continuous EM waves. However, the previous studies were primarily focused on frame analysis, with limited exploration of practical applications and a comprehensive understanding of its essential physical characteristics. In this paper, we present a three-dimensional (3-D) line-of-sight channel capacity formula that captures the vector EM physics and accommodates both near- and far-field scenes. Based on the rigorous mathematical equation and the physical mechanism of fast multipole expansion, a channel model is established, and the finite angular spectral bandwidth feature of scattered waves is revealed. To adapt to the feature of the channel, an optimization problem is formulated for determining the mode currents on the transmitter, aiming to obtain the optimal design of the precoder and combiner. We make comprehensive analyses to investigate the relationship among the spatial degree of freedom, noise, and transmitted power, thereby establishing a rigorous upper bound of channel capacity. A series of simulations are conducted to validate the theoretical model and numerical method. This work offers a novel perspective and methodology for understanding and leveraging EIT, and provides a theoretical foundation for the design and optimization of future wireless communications.

cs.IT↗

arXiv2024

MIMO Capacity Analysis and Channel Estimation for Electromagnetic Information Theory

Electromagnetic information theory (EIT) is an interdisciplinary subject that serves to integrate deterministic electromagnetic theory with stochastic Shannon's information theory. Existing EIT analysis operates in the continuous space domain, which is not aligned with the practical algorithms working in the discrete space domain. This mismatch leads to a significant difficulty in application of EIT methodologies to practical discrete space systems, which is called as the discrete-continuous gap in this paper. To bridge this gap, we establish the discrete-continuous correspondence with a prolate spheroidal wave function (PSWF)-based ergodic capacity analysis framework. Specifically, we state and prove some discrete-continuous correspondence lemmas to establish a firm theoretical connection between discrete information-theoretic quantities to their continuous counterparts. With these lemmas, we apply the PSWF ergodic capacity bound to advanced MIMO architectures such as continuous-aperture MIMO (CAP-MIMO) and extremely large-scale MIMO (XL-MIMO). From this PSWF capacity bound, we discover the capacity saturation phenomenon both theoretically and empirically. Although the growth of MIMO performance is fundamentally limited in this EIT-based analysis framework, we reveal new opportunities in MIMO channel estimation by exploiting the EIT knowledge about the channel. Inspired by the PSWF capacity bound, we utilize continuous PSWFs to improve the pilot design of discrete MIMO channel estimators, which is called as the PSWF channel estimator (PSWF-CE). Simulation results demonstrate improved performances of the proposed PSWF-CE, compared to traditional minimum mean squared error (MMSE) and compressed sensing-based estimators.

cs.IT↗

arXiv2024

Near-Field Channel Modeling for Electromagnetic Information Theory

Electromagnetic information theory (EIT) is one of the emerging topics for 6G communication due to its potential to reveal the performance limit of wireless communication systems. For EIT, the research foundation is reasonable and accurate channel modeling. Existing channel modeling works for EIT in non-line-of-sight (NLoS) scenario focus on far-field modeling, which can not accurately capture the characteristics of the channel in near-field. In this paper, we propose the near-field channel model for EIT based on electromagnetic scattering theory. We model the channel by using non-stationary Gaussian random fields and derive the analytical expression of the correlation function of the fields. Furthermore, we analyze the characteristics of the proposed channel model, e.g., channel degrees of freedom (DoF). Finally, we design a channel estimation scheme for near-field scenario by integrating the electromagnetic prior information of the proposed model. Numerical analysis verifies the correctness of the proposed scheme and shows that it can outperform existing schemes like least square (LS) and orthogonal matching pursuit (OMP).

cs.IT↗

arXiv2024

Holography inspired self-controlled reconfigurable intelligent surface

Among various promising candidate technologies for the sixth-generation (6G) wireless communications, recent advances in microwave metasurfaces have sparked a new research area of reconfigurable intelligent surfaces (RISs). By controllably reprogramming the wireless propagation channel, RISs are envisioned to achieve low-cost wireless capacity boosting, coverage extension, and enhanced energy efficiency. To reprogram the channel, each meta-atom on RIS needs an external control signal, which is usually generated by base station (BS). However, BS-controlled RISs require complicated control cables, which hamper their massive deployments. Here, we eliminate the need for BS control by proposing a self-controlled RIS (SC-RIS), which is inspired by the optical holography principle. Different from the existing BS-controlled RISs, each meta-atom of SC-RIS is integrated with an additional power detector for holographic recording. By applying the classical Fourier-transform processing to the measured hologram, SC-RIS is capable of retrieving the user's channel state information required for beamforming, thus enabling autonomous RIS beamforming without control cables. Owing to this WiFi-like plug-and-play capability without the BS control, SC-RISs are expected to enable easy and massive deployments in the future 6G systems.

eess.SP↗

arXiv2024

Coded Beam Training

In extremely large-scale multiple input multiple output (XL-MIMO) systems for future sixth-generation (6G) communications, codebook-based beam training stands out as a promising technology to acquire channel state information (CSI). Despite their effectiveness, when the pilot overhead is limited, existing beam training methods suffer from significant achievable rate degradation for remote users with low signal-to-noise ratio (SNR). To tackle this challenge, leveraging the error-correcting capability of channel codes, we introduce channel coding theory into hierarchical beam training to extend the coverage area. Specifically, we establish the duality between hierarchical beam training and channel coding, and the proposed coded beam training scheme serves as a general framework. Then, we present two specific implementations exemplified by coded beam training methods based on Hamming codes and convolutional codes, during which the beam encoding and decoding processes are refined respectively to better accommodate the beam training problem. Simulation results have demonstrated that the proposed coded beam training method can enable reliable beam training performance for remote users with low SNR while keeping training overhead low.

cs.IT↗

arXiv2024

Successive Bayesian Reconstructor for FAS Channel Estimation

Fluid antenna systems (FASs) can reconfigure their locations freely within a spatially continuous space. To keep favorable antenna positions, the channel state information (CSI) acquisition for FASs is essential. While some techniques have been proposed, most existing FAS channel estimators require several channel assumptions, such as slow variation and angular-domain sparsity. When these assumptions are not reasonable, the model mismatch may lead to unpredictable performance loss. In this paper, we propose the successive Bayesian reconstructor (S-BAR) as a general solution to estimate FAS channels. Unlike model-based estimators, the proposed S-BAR is prior-aided, which builds the experiential kernel for CSI acquisition. Inspired by Bayesian regression, the key idea of S-BAR is to model the FAS channels as a stochastic process, whose uncertainty can be successively eliminated by kernel-based sampling and regression. In this way, the predictive mean of the regressed stochastic process can be viewed as the maximum a posterior (MAP) estimator of FAS channels. Simulation results verify that, in both model-mismatched and model-matched cases, the proposed S-BAR can achieve higher estimation accuracy than the existing schemes.

cs.IT↗

arXiv2023

Enhancing Energy Efficiency for Reconfigurable Intelligent Surfaces with Practical Power Models

Reconfigurable intelligent surfaces (RISs) are widely considered a promising technology for future wireless communication systems. As an important indicator of RIS-assisted communication systems in green wireless communications, energy efficiency (EE) has recently received intensive research interest as an optimization target. However, most previous works have ignored the different power consumption between ON and OFF states of the PIN diodes attached to each RIS element. This oversight results in extensive unnecessary power consumption and reduction of actual EE due to the inaccurate power model. To address this issue, in this paper, we first utilize a practical power model for a RIS-assisted multi-user multiple-input single-output (MU-MISO) communication system, which takes into account the difference in power dissipation caused by ON-OFF states of RIS's PIN diodes. Based on this model, we formulate a more accurate EE optimization problem. However, this problem is non-convex and has mixed-integer properties, which poses a challenge for optimization. To solve the problem, an effective alternating optimization (AO) algorithm framework is utilized to optimize the base station and RIS beamforming precoder separately. To obtain the essential RIS beamforming precoder, we develop two effective methods based on maximum gradient search and SDP relaxation respectively. Theoretical analysis shows the exponential complexity of the original problem has been reduced to polynomial complexity. Simulation results demonstrate that the proposed algorithm outperforms the existing ones, leading to a significant increase in EE across a diverse set of scenarios.

eess.SP↗

arXiv2023

Electromagnetic Information Theory: Fundamentals, Modeling, Applications, and Open Problems

Traditional massive multiple-input multiple-output (MIMO) information theory adopt non-physically consistent assumptions, including white-noised, scalar-quantity, far-field, discretized, and monochromatic EM fields, which mismatch the nature of the underlying electromagnetic (EM) fields supporting the physical layer of wireless communication systems. To incorporate EM laws into designing procedures of the physical layer, we first propose the novel concept of EM physical layer, whose backbone theory is called EM information theory (EIT). In this article, we systematically investigate the basic ideas and main results of EIT. First, we review the fundamental analytical tools of classical information theory and EM theory. Then, we introduce the modeling and analysis methodologies of EIT, including continuous field modeling, degrees of freedom, and mutual information analyses. Several EIT-inspired applications are discussed to illustrate how EIT guides the design of practical wireless systems. Finally, we point out the open problems of EIT, where further research efforts are required for EIT to construct a unified interdisciplinary theory.

cs.IT↗

arXiv2023

Mutual Information for Electromagnetic Information Theory Based on Random Fields

Traditional channel capacity based on the discrete spatial dimensions mismatches the continuous electromagnetic fields. For the wireless communication system in a limited region, the spatial discretization may results in information loss because the continuous field can not be perfectly recovered from the sampling points. Therefore, electromagnetic information theory based on spatially continuous electromagnetic fields becomes necessary to reveal the fundamental theoretical capacity bound of communication systems. In this paper, we propose analyzing schemes for the performance limit between continuous transceivers. Specifically, we model the communication process between two continuous regions by random fields. Then, for the white noise model, we use Mercer expansion to derive the mutual information between the source and the destination. For the close-form expression, an analytic method is introduced based on autocorrelation functions with rational spectrum. Moreover, the Fredholm determinant is used for the general autocorrelation functions to provide the numerical calculation scheme. Further works extend the white noise model to colored noise and discuss the mutual information under it. Finally, we build an ideal model with infinite-length source and destination which shows a strong correpsondence with the time-domain model in classical information theory. The mutual information and the capacity are derived through the spatial spectral density.

cs.IT↗

arXiv2023

Sensing RISs: Enabling Dimension-Independent CSI Acquisition for Beamforming

Reconfigurable intelligent surfaces (RISs) are envisioned as a potentially transformative technology for future wireless communications. However, RISs' inability to process signals and the attendant increased channel dimension have brought new challenges to RIS-assisted systems, including significantly increased pilot overhead required for channel estimation. To address these problems, several prior contributions that enhance the hardware architecture of RISs or develop algorithms to exploit the channels' mathematical properties have been made, where the required pilot overhead is reduced to be proportional to the number of RIS elements. In this paper, we propose a dimension-independent channel state information (CSI) acquisition approach in which the required pilot overhead is independent of the number of RIS elements. Specifically, in contrast to traditional signal transmission methods, where signals from the base station (BS) and the users are transmitted in different time slots, we propose a novel method in which signals are transmitted from the BS and the user simultaneously during CSI acquisition. With this method, an electromagnetic interference random field (IRF) will be induced on the RIS, and we propose the structure of sensing RIS to capture its features. Moreover, we develop three algorithms for parameter estimation in this system, in which one of the proposed vM-EM algorithm is analyzed with the fixed-point perturbation method to obtain an asymptotic achievable bound. In addition, we also derive the Cramér-Rao lower bound (CRLB) and an asymptotic expression for characterizing the best possible performance of the proposed algorithms. Simulation results verify that our proposed signal transmission method and the corresponding algorithms can achieve dimension-independent CSI acquisition for beamforming.

eess.SP↗

arXiv2023

Can Continuous Aperture MIMO Achieve Much Better Performance than Discrete MIMO?

The concept of continuous-aperture multiple-input multiple-output (CAP-MIMO) technology has been proposed recently, which aims at achieving high spectrum efficiency by deploying extremely dense antennas or even continuous antennas in a given aperture. The fundamental question of CAP-MIMO is whether it can achieve much better performance than the traditional discrete MIMO system. In this paper, to model the CAP-MIMO, we use self-adjoint operators to depict the structural characteristics of the continuous random electromagnetic fields from physical laws. Then, we propose a non-asymptotic performance comparison scheme between continuous and discrete MIMO systems based on the analysis of mutual information. We show the consistency of the proposed scheme by proving that the mutual information between discretized transceivers converges to that between continuous transceivers. Numerical analysis verifies the theoretical results, and suggests that the mutual information obtained from the discrete MIMO with widely adopted half-wavelength spaced antennas almost achieves the mutual information obtained from CAP-MIMO.

cs.IT↗