arXiv subjects

Jiefeng Sun

Publications and source records attributed to Jiefeng Sun.

8 recordsLinked to original sources

arXiv2026

Real-Time Shape Control of Multi-Segment Soft Robotic Arms Using Koopman Operators with Global and Local Observables

Multi-segment soft robotic arms can continuously reconfigure their body shapes for safe interaction, but tip control alone is insufficient for constrained-space tasks. Therefore, shape control is a more important task for multi-segment soft arms than tip control, but remains challenging due to the high dimensionality and nonlinear dynamics of continuum deformation. In existing work, shape control accuracy is defined by the error in the global frame (global shape error). For multi-segment soft arms, using only global shape error as the control objective is insufficient, as segment coupling, gravity-induced loading, and inertial effects become more significant. This difficulty increases with the number of segments. In this paper, we present a Koopman-based model predictive control framework that combines global and local observables, enabling real-time shape control on multi-segment soft robotic arms. The framework is evaluated through numerical and physical experiments. Numerical experiments demonstrate the scalability of the proposed controller by achieving shape control on robots with up to 10 independently actuated segments. The physical experiments demonstrate that the controller is capable of (1) real-time shape control of 3- and 5-segment robotic arms with tip speeds up to 0.6 m/s, (2) robust tracking without retraining, including distal payloads up to 400~g and recovery from a 7~N lateral disturbance, and (3) the potential for future inspection applications through a confined-space demonstration. These results demonstrate that the proposed framework enables dynamic, scalable, and accurate real-time shape control on multi-segment soft robotic arms.

cs.RO↗

arXiv2026

Impact of a Soft Wearable Back-Support Device on Postural Stability during Trip-Like Perturbations

The effectiveness of a soft wearable back-support device in enhancing postural stability was investigated under trip-like perturbations using two experimental paradigms: perturbed standing and perturbed walking. Healthy subjects completed trials under three different back-support conditions: no device, device worn with low stiffness, and device activated with high stiffness. Whole-body stability was quantified using the minimum Margin of Stability (MOS) at the point of maximal instability. Results demonstrated increased MOS during device use, indicating enhanced postural stability. In standing, MOS increased significantly with device stiffness, whereas in walking, both device conditions improved MOS relative to no device but did not differ significantly from each other. These findings highlight the potential of soft wearable back-support devices with adjustable stiffness to improve reactive balance control against external perturbations, with important implications for fall prevention. Future research should explore personalized stiffness optimization and evaluate efficacy in populations at elevated risk of falls.

cs.RO↗

arXiv2026

Improved Postural Stability Using a Lightweight Semi-Active Soft Back Support Device Under Standing Perturbations

Older adults are particularly susceptible to falls following perturbations during standing, such as forward loss of balance. Back support devices that assist trunk extension may help mitigate fall risk by preventing excessive trunk flexion. Previous studies have investigated heavy back support devices; however, these systems often introduced adverse effects on stability due to their added mass, which shifted the body's natural center of mass unfavorably. In contrast, lightweight passive devices have shown limited benefits, as they can generate only modest assistive forces during the relatively small trunk flexion associated with forward balance loss. In this study, we evaluated the effects of a lightweight semi-active soft back support device on postural stability following standing perturbations. Our device combines an active element (a pneumatic artificial muscle) in parallel with a passive elastic band. The active element rapidly provides assistive force following a perturbation, overcoming the limitations of passive devices. Experiments conducted with five healthy individuals demonstrated that the semi-active device significantly reduced whole-body angular momentum and increased the margin of stability, indicating improved balance recovery performance. These results highlight the promise of semi-active soft wearable robots as an effective and lightweight strategy for fall prevention during standing perturbations.

cs.RO↗

arXiv2026

Soft Semi-active Back Support Device with Adaptive Force Profiles using Variable-elastic Actuation and Weight Feedback

Portable active back support devices (BSDs) offer tunable assistance but are often bulky and heavy, limiting their usability. In contrast, passive BSDs are lightweight and compact but lack the ability to adapt their assistance to different back movements. We present a soft, lightweight, and compact BSD that combines a variable-stiffness passive element and an active element (an artificial muscle) in parallel. The device provides tunable assistance through discrete changes in stiffness values and active force levels. We validate the device's tuning capabilities through bench testing and on-body characterization. Further, we use the device's tuning capabilities to provide weight-adaptive object lifting and lowering assistance. We detect the weight handled by the user based on forearm force myography and upper-back inertial measurement unit data. Furthermore, electromyography analyses in five participants performing symmetric object lifting and lowering tasks showed reductions in back extensor activity. Preliminary results in one participant also indicated reduced muscle activity during asymmetric lifting.

eess.SY↗

arXiv2025

Shape control of simulated multi-segment continuum robots via Koopman operators with per-segment projection

Soft continuum robots can allow for biocompatible yet compliant motions, such as the ability of octopus arms to swim, crawl, and manipulate objects. However, current state-of-the-art continuum robots can only achieve real-time task-space control (i.e., tip control) but not whole-shape control, mainly due to the high computational cost from its infinite degrees of freedom. In this paper, we present a data-driven Koopman operator-based approach for the shape control of simulated multi-segment tendon-driven soft continuum robots with the Kirchhoff rod model. Using data collected from these simulated soft robots, we conduct a per-segment projection scheme on the state of the robots allowing for the identification of control-affine Koopman models that are an order of magnitude more accurate than without the projection scheme. Using these learned Koopman models, we use a linear model predictive control (MPC) to control the robots to a collection of target shapes of varying complexity. Our method realizes computationally efficient closed-loop control, and demonstrates the feasibility of real-time shape control for soft robots. We envision this work can pave the way for practical shape control of soft continuum robots.

cs.RO↗

arXiv2025

Physics-informed Split Koopman Operators for Data-efficient Soft Robotic Simulation

Koopman operator theory provides a powerful data-driven technique for modeling nonlinear dynamical systems in a linear framework, in comparison to computationally expensive and highly nonlinear physics-based simulations. However, Koopman operator-based models for soft robots are very high dimensional and require considerable amounts of data to properly resolve. Inspired by physics-informed techniques from machine learning, we present a novel physics-informed Koopman operator identification method that improves simulation accuracy for small dataset sizes. Through Strang splitting, the method takes advantage of both continuous and discrete Koopman operator approximation to obtain information both from trajectory and phase space data. The method is validated on a tendon-driven soft robotic arm, showing orders of magnitude improvement over standard methods in terms of the shape error. We envision this method can significantly reduce the data requirement of Koopman operators for systems with partially known physical models, and thus reduce the cost of obtaining data.

cs.RO↗

arXiv2023

An Integrated Approach to Aerial Grasping: Combining a Bistable Gripper with Adaptive Control

Grasping using an aerial robot can have many applications ranging from infrastructure inspection and maintenance to precise agriculture. However, aerial grasping is a challenging problem since the robot has to maintain an accurate position and orientation relative to the grasping object, while negotiating various forms of uncertainties (e.g., contact force from the object). To address such challenges, in this paper, we integrate a novel passive gripper design and advanced adaptive control methods to enable robust aerial grasping. The gripper is enabled by a pre-stressed band with two stable states (a flat shape and a curled shape). In this case, it can automatically initiate the grasping process upon contact with an object. The gripper also features a cable-driven system by a single DC motor to open the gripper without using cumbersome pneumatics. Since the gripper is passively triggered and initially has a straight shape, it can function without precisely aligning the gripper with the object (within an $80$ mm tolerance). Our adaptive control scheme eliminates the need for any a priori knowledge (nominal or upper bounds) of uncertainties. The closed-loop stability of the system is analyzed via Lyapunov-based method. Combining the gripper and the adaptive control, we conduct comparative real-time experimental results to demonstrate the effectiveness of the proposed integrated system for grasping. Our integrated approach can pave the way to enhance aerial grasping for different applications.

cs.RO↗

arXiv2018

Leveraging Elastic instabilities for Amplified Performance: spine-inspired high-speed and high-force soft robots

Soft machines typically exhibit slow locomotion speed and low manipulation strength because of intrinsic limitations of soft materials. Here, we present a generic design principle that harnesses mechanical instability for a variety of spine-inspired fast and strong soft machines. Unlike most current soft robots that are designed as inherently and unimodally stable, our design leverages tunable snap-through bistability to fully explore the ability of soft robots to rapidly store and release energy within tens of milliseconds. We demonstrate this generic design principle with three high-performance soft machines: High-speed cheetah-like galloping crawlers with locomotion speeds of 2.68 body length/s, high-speed underwater swimmers (0.78 body length/s), and tunable low-to-high-force soft grippers with over 1 to 103 stiffness modulation (maximum load capacity is 11.4 kg). Our study establishes a new generic design paradigm of next-generation high-performance soft robots that are applicable for multifunctionality, different actuation methods, and materials at multiscales.

physics.app-ph↗