arXiv subjects

Jiho Song

Publications and source records attributed to Jiho Song.

8 recordsLinked to original sources

arXiv2022

Joint Vehicle Tracking and RSU Selection for V2I Communications with Extended Kalman Filter

We develop joint vehicle tracking and road side unit (RSU) selection algorithms suitable for vehicle-to-infrastructure (V2I) communications. We first design an analytical framework for evaluating vehicle tracking systems based on the extended Kalman filter. A simple, yet effective, metric that quantifies the vehicle tracking performance is derived in terms of the angular derivative of a dominant spatial frequency. Second, an RSU selection algorithm is proposed to select a proper RSU that enhances the vehicle tracking performance. A joint vehicle tracking algorithm is also developed to maximize the tracking performance by considering sounding samples at multiple RSUs while minimizing the amount of sample exchange. The numerical results verify that the proposed vehicle tracking algorithms give better performance than conventional signal-to-noise ratio-based tracking systems.

cs.IT↗

arXiv2021

Adaptive Beam Design for V2I Communications using Vehicle Tracking with Extended Kalman Filter

Vehicle-to-everything communication system is a strong candidate for improving the driving experience and automotive safety by linking vehicles to wireless networks. To take advantage of the full benefits of vehicle connectivity, it is essential to ensure a stable network connection between roadside unit (RSU) and fast-moving vehicles. Based on the extended Kalman filter (EKF), we develop a vehicle tracking algorithm to enable reliable radio connections. For the vehicle tracking algorithm, we focus on estimating the rapid changes in the beam direction of a high-mobility vehicle while reducing the feedback overhead. Furthermore, we design a beamforming codebook that considers the road layout and RSU. By leveraging the proposed beamforming codebook, vehicles on the road can expect a service quality similar to that of conventional cellular services. Finally, a beamformer selection algorithm is developed to secure sufficient gain for the system's link budget. Numerical results verify that the EKF-based vehicle tracking algorithm and the proposed beamforming structure are more suitable for vehicle-to-infrastructure networks compared to existing schemes.

cs.IT↗

arXiv2020

Beam Designs for Millimeter-Wave Backhaul with Dual-Polarized Uniform Planar Arrays

This paper proposes hybrid beamforming designs for millimeter-wave (mmWave) multiple-input multiple-output (MIMO) backhaul systems equipped with uniform planar arrays (UPAs) of dual-polarization antennas at both the transmit and receive base stations. The proposed beamforming designs are to near-optimally solve optimization problems taking the dual-polarization UPA structure into account. Based on the solutions of optimization problems, this paper shows it is possible to generate the optimal dual-polarization beamformer from the optimal single-polarization beamformer sharing the same optimality. As specific examples, squared error and magnitude of inner product are considered respectively for optimization criteria. To optimize proposed beamformers, partial channel information is needed, and the use of low overhead pilot sequences is also proposed to figure out the required information. Simulation results verify that the resulting beamformers have the most uniform gain (with the squared error criterion) or the highest average gain (with the magnitude of inner product criterion) in the covering region with the UPA of dual-polarization antennas.

cs.IT↗

arXiv2020

Beam Design for Millimeter-Wave Backhaul with Dual-Polarized Uniform Planar Arrays

This paper proposes a beamforming design for millimeter-wave (mmWave) backhaul systems with dual-polarization antennas in uniform planar arrays (UPAs). The proposed design method optimizes a beamformer to mimic an ideal beam pattern, which has flat gain across its coverage, under the dominance of the line-of-sight (LOS) component in mmWave systems. The dual-polarization antenna structure is considered as constraints of the optimization. Simulation results verify that the resulting beamformer has uniform beam pattern and high minimum gain in the covering region.

eess.SP↗

arXiv2019

Limited Feedback Designs for Machine-type Communications Exploiting User Cooperation

Multiuser multiple-input multiple-output (MIMO) systems are a prime candidate for use in massive connection density in machine-type communication (MTC) networks. One of the key challenges of MTC networks is to obtain accurate channel state information (CSI) at the access point (AP) so that the spectral efficiency can be improved by enabling enhanced MIMO techniques. However, current communication mechanisms relying upon frequency division duplexing (FDD) might not fully support an enormous number of devices due to the rate-constrained limited feedback and the time-consuming scheduling architectures. In this paper, we propose a user cooperation-based limited feedback strategy to support high connection density in massive MTC networks. In the proposed algorithm, two close-in users share the quantized version of channel information in order to improve channel feedback accuracy. The cooperation process is performed without any transmitter interventions (i.e., in a grant-free manner) to satisfy the low-latency requirement that is vital for MTC services. Moreover, based on the sum-rate throughput analysis, we develop an adaptive cooperation algorithm with a view to activating/deactivating the user cooperation mode according to channel and network conditions.

cs.IT↗

arXiv2018

Advanced Quantizer Designs for FDD-Based FD-MIMO Systems Using Uniform Planar Arrays

Massive multiple-input multiple-output (MIMO) systems, which utilize a large number of antennas at the base station, are expected to enhance network throughput by enabling improved multiuser MIMO techniques. To deploy many antennas in reasonable form factors, base stations are expected to employ antenna arrays in both horizontal and vertical dimensions, which is known as full-dimension (FD) MIMO. The most popular two-dimensional array is the uniform planar array (UPA), where antennas are placed in a grid pattern. To exploit the full benefit of massive MIMO in frequency division duplexing (FDD), the downlink channel state information (CSI) should be estimated, quantized, and fed back from the receiver to the transmitter. However, it is difficult to accurately quantize the channel in a computationally efficient manner due to the high dimensionality of the massive MIMO channel. In this paper, we develop both narrowband and wideband CSI quantizers for FD-MIMO taking the properties of realistic channels and the UPA into consideration. To improve quantization quality, we focus on not only quantizing dominant radio paths in the channel, but also combining the quantized beams. We also develop a hierarchical beam search approach, which scans both vertical and horizontal domains jointly with moderate computational complexity. Numerical simulations verify that the performance of the proposed quantizers is better than that of previous CSI quantization techniques.

cs.IT↗

arXiv2017

Common Codebook Millimeter Wave Beam Design: Designing Beams for Both Sounding and Communication with Uniform Planar Arrays

Fifth generation (5G) wireless networks are expected to utilize wide bandwidths available at millimeter wave (mmWave) frequencies for enhancing system throughput. However, the unfavorable channel conditions of mmWave links, e.g., higher path loss and attenuation due to atmospheric gases or water vapor, hinder reliable communications. To compensate for these severe losses, it is essential to have a multitude of antennas to generate sharp and strong beams for directional transmission. In this paper, we consider mmWave systems using uniform planar array (UPA) antennas, which effectively place more antennas on a two-dimensional grid. A hybrid beamforming setup is also considered to generate beams by combining a multitude of antennas using only a few radio frequency chains. We focus on designing a set of transmit beamformers generating beams adapted to the directional characteristics of mmWave links assuming a UPA and hybrid beamforming. We first define ideal beam patterns for UPA structures. Each beamformer is constructed to minimize the mean squared error from the corresponding ideal beam pattern. Simulation results verify that the proposed codebooks enhance beamforming reliability and data rate in mmWave systems.

cs.IT↗

arXiv2015

Adaptive Millimeter Wave Beam Alignment for Dual-Polarized MIMO Systems

Fifth generation wireless systems are expected to employ multiple antenna communication at millimeter wave (mmWave) frequencies using small cells within heterogeneous cellular networks. The high path loss of mmWave as well as physical obstructions make communication challenging. To compensate for the severe path loss, mmWave systems may employ a beam alignment algorithm that facilitates highly directional transmission by aligning the beam direction of multiple antenna arrays. This paper discusses a mmWave system employing dual-polarized antennas. First, we propose a practical soft-decision beam alignment (soft-alignment) algorithm that exploits orthogonal polarizations. By sounding the orthogonal polarizations in parallel, the equality criterion of the Welch bound for training sequences is relaxed. Second, the analog beamforming system is adapted to the directional characteristics of the mmWave link assuming a high Ricean K-factor and poor scattering environment. The soft-algorithm enables the mmWave system to align innumerable narrow beams to channel subspace in an attempt to effectively scan the mmWave channel. Thirds, we propose a method to efficiently adapt the number of channel sounding observations to the specific channel environment based on an approximate probability of beam misalignment. Simulation results show the proposed soft-alignment algorithm with adaptive sounding time effectively scans the channel subspace of a mobile user by exploiting polarization diversity.

cs.IT↗