arXiv subjects

Jin Dong Song

Publications and source records attributed to Jin Dong Song.

At least 19 recordsLinked to original sources

arXiv2025

Quantum interference between autonomous dissimilar quantum light sources for hybrid quantum networks

Hybrid quantum systems play a crucial role in advancing scalable and versatile quantum networks as they combine the strengths of different quantum platforms. An important challenge for the development of hybrid quantum networks lies in interfacing heterogeneous quantum nodes and distributing entanglement among them. Single photons emitted from these dissimilar quantum nodes typically show distinct spectral and temporal properties. Therefore, they necessitate spectral filtering and temporal synchronization, which introduce significant photon losses and require additional resources. In this work, we successfully generate indistinguishable photons from two distinct quantum systems of a warm atomic ensemble and a solid-state quantum dot. Remarkably, quantum interference between dissimilar sources is achieved without additional spectral filtering and time synchronization, which enables autonomous quantum nodes for a hybrid quantum network. 133Cs atomic ensemble can efficiently generate heralded single photons at the wavelength of 917 nm of the 6P_(3/2)-6D_(5/2) transition, while the single photons emitted from an InAs/GaAs quantum dot can be tuned to match the 133Cs transition wavelength. Our dense warm atomic ensemble and cavity-coupled quantum dot can efficiently generate bright and resonant single photons at detection rates approaching MHz, respectively. More importantly, these single photons exhibit inherent spectral similarities not only in the wavelength but also in the spectral linewidth, achieving a high spectral overlap of 0.92. Such intrinsic compatibility between dissimilar quantum sources is essential to leverage the advantages of different quantum platforms, paving the way toward a large-scale and functional hybrid quantum network.

quant-ph↗

arXiv2024

Long-lived quantum correlation by cavity-mediated subradiance

Cooperative effects such as super(sub)radiance in quantum systems arise from the interplay among quantum emitters. While bright superradiant states have been extensively studied and yielded significant insights into cooperative phenomena, subradiant states have remained less explored due to their inherently dark state nature. However, subradiance holds significant potential as valuable quantum resources that exploit long-lived and large-scale entanglement, which is a key for advancing quantum information technologies. Here, we demonstrate a long-lived subradiant state among multiple quantum emitters coupled to a directional low Q cavity. In a tailored photonic environment with balanced cavity dissipation, emitter-field coupling strength, and incoherent pumping, two coupled quantum dots exhibit a steady-state population in a subradiant state with highly negative cooperativity. As an important hallmark of a subradiant state, the system shows large photon bunching (g^((2))(0)>>2) and suppressed single-photon decay. In addition, controlling the excitation wavelength provides a useful tool for manipulating dephasing and the number of coupled emitters, which leads to significant changes in photon statistics. Our approach to inducing cavity-mediated subradiance paves the way for creating and harnessing quantum correlations in quantum emitters via a long-lived entangled quantum state, essential for quantum storage and metrology.

quant-ph↗

arXiv2022

Single quantum dot selection and tailor-made photonic device integration using nanoscale focus pinspot

Among the diverse platforms of quantum light sources, epitaxially grown semiconductor quantum dots (QDs) are one of the most attractive workhorses for realizing various quantum photonic technologies owing to their outstanding brightness and scalability. There exist various material systems for these QDs based on their appropriate emission bandwidth; however, only a few material systems have successfully grown single or low-density QDs, which are essential for quantum light sources. In most other material systems, it is difficult to realize low-density QDs, and the mesa-etching process is usually undergone in order to reduce their density. Nevertheless, the etching process irreversibly destroys the medium near the QD, which is detrimental to in-plane device integration. In this study, we apply a nondestructive luminescence picking method termed as nanoscale focus pinspot (NFP) using helium ion microscopy to reduce the luminous QD density while retaining the surrounding medium. Given that the NFP can precisely manipulate the luminescence at nanoscale resolution, a photonic device can be deterministically fabricated on the target QD matched from both spatial and spectral points of view. After applying the NFP, we extract only a single QD emission out of the high-density ensemble QD emission. Moreover, the photonic structure of a circular Bragg reflector is deterministically integrated with the selected QD, and the extraction efficiency of the QD emission has been improved 27 times. Furthermore, this technique does not destroy the medium and only controls the luminescence. Hence, it is highly applicable to various photonic structures, including photonic waveguides or photonic crystal cavities regardless of their materials.

physics.app-ph↗

arXiv2022

Coherence in Cooperative Photon Emission from Indistinguishable Quantum Emitters

Photon-mediated interactions between atomic systems can arise via coupling to a common electromagnetic mode or by quantum interference. Here, we probe the role of coherence in cooperative emission arising from two distant but indistinguishable solid-state emitters because of path erasure. The primary signature of cooperative emission, the emergence of "bunching" at zero delay in an intensity correlation experiment, is used to characterise the indistinguishability of the emitters, their dephasing, and the degree of correlation in the joint system that can be coherently controlled. In a stark departure from a pair of uncorrelated emitters, in Hong-Ou-Mandel type interference measurements we observe photon statistics from a pair of indistinguishable emitters resembling that of a weak coherent state from an attenuated laser. Our experiments establish techniques to control and characterize cooperative behavior between matter qubits using the full quantum optics toolbox, a key step toward realizing large-scale quantum photonic networks.

quant-ph↗

arXiv2022

Thermal release tape-assisted semiconductor membrane transfer process for hybrid photonic devices embedding quantum emitters

Being able to combine different materials allows taking advantage of different properties and device engineering that cannot be found or exploited within a single material system. In quantum nano-photonics, one might want to increase the device functionalities by, for instance, combining efficient classical and quantum light emission available in III-V semiconductors, low-loss light propagation accessible in silicon-based materials, fast electro-optical properties of lithium niobate and broadband reflectors and/or buried metallic contacts for local electric field application or electrical injection of emitters. We propose a transfer printing technique based on the removal of arrays of free-standing membranes and their deposition onto a host material using a thermal release adhesive tape-assisted process. This approach is versatile, in that it poses limited restrictions on the transferred and host materials. In particular, we transfer 190 nm-thick GaAs membranes, with dimensions up to about 260$μ$m x 80$μ$m, containing InAs quantum dots, onto a gold substrate. We show that the presence of a back reflector combined with the etching of micro-pillars significantly increases the extraction efficiency of quantum light, reaching photon fluxes, from a single quantum dot line, exceeding 8 x 10$^5$ photons per second, which is four times higher than the highest count rates measured, on the same chip, from emitters outside the pillars. Given the versatility and the ease of the process, this technique opens the path to the realisation of hybrid quantum and nano-photonic devices that can combine virtually any material that can be undercut to realise free-standing membranes that are then transferred onto any host substrate, without specific compatibility issues and/or requirements.

physics.app-ph↗

arXiv2022

Triggered single-photon generation and resonance fluorescence in ultra-low loss integrated photonic circuits

A central requirement for photonic quantum information processing systems lies in the combination of nonclassical light sources and low-loss, phase-stable optical modes. While substantial progress has been made separately towards ultra-low loss, $\leq1$ dB/m, chip-scale photonic circuits and high brightness single-photon sources, integration of these technologies has remained elusive. Here, we report a significant advance towards this goal, in the hybrid integration of a quantum emitter single-photon source with a wafer-scale, ultra-low loss silicon nitride photonic integrated circuit. We demonstrate triggered and pure single-photon emission directly into a Si$_3$N$_4$ photonic circuit with $\approx1$ dB/m propagation loss at a wavelength of $\approx920$ nm. These losses are more than two orders of magnitude lower than reported to date for any photonic circuit with on-chip quantum emitter sources, and $>50$ % lower than for any prior foundry-compatible integrated quantum photonic circuit, to the best of our knowledge. Using these circuits we report the observation of resonance fluorescence in the strong drive regime, a milestone towards integrated coherent control of quantum emitters. These results constitute an important step forward towards the creation of scaled chip-integrated photonic quantum information systems.

physics.optics↗

arXiv2021

Broadband, efficient extraction of quantum light by a photonic device comprised of a metallic nano-ring and a gold back reflector

To implement quantum light sources based on quantum emitters in applications, it is desirable to improve the extraction efficiency of single photons. In particular controlling the directionality and solid angle of the emission are key parameters, for instance, to couple single photons into optical fibers and send the information encoded in quantum light over long distances, for quantum communication applications. In addition, fundamental studies of the radiative behavior of quantum emitters, including studies of coherence and blinking, benefit from such improved photon collection. Quantum dots grown via Stranski-Krastanov technique have shown to be good candidates for bright, coherent, indistinguishable quantum light emission. However, one of the challenges associated with these quantum light sources arises from the fact that the emission wavelengths can vary from one emitter to the other. To this end, broadband light extractors that do not rely on high-quality factor optical cavities would be desirable, so that no tuning between the quantum dot emission wavelength and the resonator used to increase the light extraction is needed. Here, we show that metallic nano-rings combined with gold back reflectors increase the collection efficiency of single photons and we study the statistics of this effect when quantum dots are spatially randomly distributed within the nano-rings. We show an average increase in the brightness of about a factor 7.5, when comparing emitters within and outside the nano-rings in devices with a gold back reflector, we measure count rates exceeding 7 x 10^6 photons per second and single photon purities as high as 85% +/- 1%. These results are important steps towards the realisation of scalable, broadband, easy to fabricate sources of quantum light for quantum communication applications.

physics.optics↗

arXiv2021

A Bright Source of Telecom Single Photons Based on Quantum Frequency Conversion

On-demand indistinguishable single photon sources are essential for quantum networking and communication. Semiconductor quantum dots are among the most promising candidates, but their typical emission wavelength renders them unsuitable for use in fibre networks. Here, we present quantum frequency conversion of near-infrared photons from a bright quantum dot to the telecommunication C-band, allowing integration with existing fibre architectures. We use a custom-built, tunable 2400 nm seed laser to convert single photons from 942 nm to 1550 nm in a difference frequency generation process. We achieve an end-to-end conversion efficiency of $\sim$35%, demonstrate count rates approaching 1 MHz at 1550 nm with $g^{\left(2\right)}\left(0\right) = 0.04$, and achieve Hong-Ou-Mandel visibilities of 60%. We expect this scheme to be preferable to quantum dot sources directly emitting at telecom wavelengths for fibre based quantum networking.

quant-ph↗

arXiv2020

Observation of a partially rotating superfluid of exciton-polariton

Rotation of a container holding a viscous fluid forms a vortex which grows with increasing angular velocity. A superfluid, however, is intrinsically different from these normal fluids because its rotation is quantized. Even if a container of superfluid is rotating, the fluid itself remains still until a critical velocity is reached. Beyond the critical velocity, all the particles conspire to suddenly pick up an angular momentum of $\hbar$ each and forms a quantized vortex. As a result, a superfluid is known to increase its rotation by a total angular momentum of $N\hbar$. In this letter, we show that exciton-polariton superfluid can split into an irrotational part and a rotational part. The relative ratio between the two states can be controlled by either pump beam's power or spot size. Consequently, angular momentum of exciton-polariton superfluid can be tuned from zero to $N\hbar$ continuously. This striking observation sets the stage for studying non-equilibrium properties of a superfluid with exciton-polaritons.

cond-mat.quant-gas↗

arXiv2020

Control of single quantum emitters in bio-inspired aperiodic nano-photonic devices

Enhancing light-matter interactions on a chip is of paramount importance to study nano- and quantum optics effects and to realise integrated devices, for instance, for classical and quantum photonics, sensing and energy harvesting applications. Engineered nano-devices enable the efficient confinement of light and the control of the spontaneous emission dynamics of single emitters, which is crucial for cavity quantum electrodynamics experiments and for the development of classical and quantum light sources. Here, we report on the demonstration of enhanced light-matter interaction and Purcell effects on a chip, based on bio-inspired aperiodic devices fabricated in silicon nitride and gallium arsenide. Internal light sources, namely optically-active defect centers in silicon nitride and indium arsenide single quantum dots, are used to image and characterize, by means of micro-photoluminescence spectroscopy, the individual optical modes confined by photonic membranes with Vogel-spiral geometry. By studying the statistics of the measured optical resonances, in partnership with rigorous multiple scattering theory, we observe log-normal distributions and report quality factors with values as high as 2201+/-443. Building on the strong light confinement achieved in this novel platform, we further investigate the coupling of single semiconductor quantum dots to the confined optical modes. Our results show cavity quantum electrodynamics effects providing strong modifications of the spontaneous emission decay of single optical transitions: we show control of the decay lifetime of single emitters with a dynamic range reaching 20. Our findings improve the understanding of the fundamental physical properties of light-emitting Vogel-spiral systems, show their application to quantum photonic devices, and form the basis for the further development of classical and quantum active devices on a chip.

physics.optics↗

arXiv2019

Indistinguishable photons from deterministically integrated single quantum dots in heterogeneous GaAs/Si$_3$N$_4$ quantum photonic circuits

Silicon photonics enables scaling of quantum photonic systems by allowing the creation of extensive, low-loss, reconfigurable networks linking various functional on-chip elements. Inclusion of single quantum emitters onto photonic circuits, acting as on-demand sources of indistinguishable photons or single-photon nonlinearities, may enable large-scale chip-based quantum photonic circuits and networks. Towards this, we use low-temperature $\textit{in situ}$ electron-beam lithography to deterministically produce hybrid GaAs/Si$_3$N$_4$ photonic devices containing single InAs quantum dots precisely located inside nanophotonic structures, which act as efficient, Si$_3$N$_4$ waveguide-coupled on-chip, on-demand single-photon sources. The precise positioning afforded by our scalable fabrication method furthermore allows observation of post-selected indistinguishable photons. This indicates a promising path towards significant scaling of chip-based quantum photonics, enabled by large fluxes of indistinguishable single-photons produced on-demand, directly on-chip.

physics.app-ph↗

arXiv2018

Direct Transfer of Light's Orbital Angular Momentum onto Non-resonantly Excited Polariton Superfluid

Recently, exciton-polaritons in a semiconductor microcavity were found to condense into a coherent ground state much like a Bose-Einstein condensate and a superfluid. They have become a unique testbed for generating and manipulating quantum vortices in a driven-dissipative superfluid. Here, we generate exciton-polariton condensate with non-resonant Laguerre-Gaussian (LG) optical beam and verify the direct transfer of light's orbital angular momentum to exciton-polariton quantum fluid. Quantized vortices are found in spite of large energy relaxation involved in non-resonant pumping. We identified phase singularity, density distribution and energy eigenstates for the vortex states. Our observations confirm that non-resonant optical LG beam can be used to manipulate chirality, topological charge, and stability of non-equilibrium quantum fluid. These vortices are quite robust, only sensitive to the OAM of light and not other parameters such as energy, intensity, size or shape of the pump beam. Therefore, optical information can be transferred between photon and exciton-polariton with ease and the technique is potentially useful to form the controllable network of multiple topological charges even in the presence of spectral randomness in solid state system.

cond-mat.quant-gas↗

arXiv2018

Combined metallic nano-rings and solid-immersion lenses for bright emission from single InAs/GaAs quantum dots

Solid-state single-photon emitters are key components for integrated quantum photonic devices. However, they can suffer from poor extraction efficiencies, caused by the large refractive index contrast between the bulk material they are embedded in and air: this results in a small fraction (that can be as low as <1%) of the emitted photons reaching free-space collection optics. To overcome this issue, we present a device that combines a metallic nano-ring, positioned on the sample surface and centered around the emitter, and an epoxy-based super-solid immersion lens, deterministically deposited above the ring devices. We show that the combined broadband lensing effect of the nano-ring and of the super-solid immersion lens significantly increases the extraction of light emitted by single InAs/GaAs quantum dots into free space: we observe enhancements in the emitted intensity by the nano-ring of up to a factor 20 and by the super-solid immersion lens of up to a factor 10. Such cumulative enhancements allow us to measure photon fluxes approaching 1 million counts per second, from a single InAs/GaAs quantum dot in bulk. The combined broad-band enhancement in the extraction of light can be implemented with any kind of classical and quantum solid-state emitter and opens the path to the realisation of scalable bright devices. The same approach can also be implemented to improve the absorption of light, for instance for small-area broadband photo-detectors.

physics.app-ph↗

arXiv2017

GaAs droplet quantum dots with nanometer-thin capping layer for plasmonic applications

We report on the growth and optical characterisation of droplet GaAs quantum dots with extremely-thin (11 nm) capping layers. To achieve such result, an internal thermal heating step is introduced during the growth and its role in the morphological properties of the quantum dots obtained is investigated via scanning electron and atomic force microscopy. Photoluminescence measurements at cryogenic temperatures show optically stable, sharp and bright emission from single quantum dots, at near-infrared wavelengths. Given the quality of their optical properties and the proximity to the surface, such emitters are ideal candidates for the investigation of near field effects, like the coupling to plasmonic modes, in order to strongly control the directionality of the emission and/or the spontaneous emission rate, crucial parameters for quantum photonic applications.

physics.optics↗

arXiv2017

Direct observation of nanofabrication influence on the optical properties of single self-assembled InAs/GaAs quantum dots

Single self-assembled InAs/GaAs quantum dots are a promising solid-state quantum technology, with which vacuum Rabi splitting, single-photon-level nonlinearities, and bright, pure, and indistinguishable single-photon generation having been demonstrated. For such achievements, nanofabrication is used to create structures in which the quantum dot preferentially interacts with strongly-confined optical modes. An open question is the extent to which such nanofabrication may also have an adverse influence, through the creation of traps and surface states that could induce blinking, spectral diffusion, and dephasing. Here, we use photoluminescence imaging to locate the positions of single InAs/GaAs quantum dots with respect to alignment marks with < 5 nm uncertainty, allowing us to measure their behavior before and after fabrication. We track the quantum dot emission linewidth and photon statistics as a function of distance from an etched surface, and find that the linewidth is significantly broadened (up to several GHz) for etched surfaces within a couple hundred nanometers of the quantum dot. However, we do not observe appreciable reduction of the quantum dot radiative efficiency due to blinking. We also show that atomic layer deposition can stabilize spectral diffusion of the quantum dot emission, and partially recover its linewidth.

cond-mat.mes-hall↗

arXiv2017

Metallic nanorings for broadband, enhanced extraction of light from solid-state emitters

We report on the increased extraction of light emitted by solid-state sources embedded within high refractive index materials. This is achieved by making use of a local lensing effect by sub-micron metallic rings deposited on the sample surface and centered around single emitters. We show enhancements in the intensity of the light emitted by InAs/GaAs single quantum dot lines into free space as high as a factor 20. Such a device is intrinsically broadband and therefore compatible with any kind of solid-state light source. We foresee the fabrication of metallic rings via scalable techniques, like nano-imprint, and their implementation to improve the emission of classical and quantum light from solid-state sources. Furthermore, while increasing the brightness of the devices, the metallic rings can also act as top contacts for the local application of electric fields for carrier injection or wavelength tuning.

physics.optics↗

arXiv2016

Cryogenic photoluminescence imaging system for nanoscale positioning of single quantum emitters

We report a photoluminescence imaging system for locating single quantum emitters with respect to alignment features. Samples are interrogated in a 4~K closed-cycle cryostat by a high numerical aperture (NA=0.9, 100$\times$ magnification) objective that sits within the cryostat, enabling high efficiency collection of emitted photons without image distortions due to the cryostat windows. The locations of single InAs/GaAs quantum dots within a $>50$~$μ$m~$\times$~50~$μ$m field of view are determined with $\approx4.5$~nm uncertainty (one standard deviation) in a 1~s long acquisition. The uncertainty is determined through a combination of a maximum likelihood estimate for localizing the quantum dot emission, and a cross-correlation method for determining the alignment mark center. This location technique can be an important step in the high-throughput creation of nanophotonic devices that rely upon the interaction of highly confined optical modes with single quantum emitters.

quant-ph↗

arXiv2016

Combined atomic force microscopy and photoluminescence imaging to select single InAs/GaAs quantum dots for quantum photonic devices

We report on a combined photoluminescence imaging and atomic force microscopy study of single, isolated self-assembled InAs quantum dots (density <0.01 um^(-2) capped by a 95 nm GaAs layer, and emitting around 950 nm. By combining optical and scanning probe characterization techniques, we determine the position of single quantum dots with respect to comparatively large (100 nm to 1000 nm in-plane dimension) topographic features. We find that quantum dots often appear (>25% of the time) in the vicinity of these features, but generally do not exhibit significant differences in their non-resonantly pumped emission spectra in comparison to quantum dots appearing in defect-free regions. This behavior is observed across multiple wafers produced in different growth chambers. Our characterization approach is relevant to applications in which single quantum dots are embedded within nanofabricated photonic devices, where such large surface features can affect the interaction with confined optical fields and the quality of the single-photon emission. In particular, we anticipate using this approach to screen quantum dots not only based on their optical properties, but also their surrounding surface topographies.

cond-mat.mes-hall↗